MAINTENANCE REPAIR WORK OF STEEL FURNITURE INCLUDING REPAIRS OF REVOLVING CHAIRS AND PAINTING OF ALL REPAIRED STEEL FURNITURE UNDER GE WELLINGTON

Amount

FD-220: Removing old unserviceable ply wood of 12mm thickness & fixing new 12mm thick plywood commercial BWR of size 1980mm x 900mm over top of the charpoys GI pipe with 10 No counter sunk head bolts MS of The Size 5mm x 75mm Rest all as shown on drawing and as directed.

FD-/MAP-II/01 : All as per the item No.1 but hereinbefore Charpoy IP Hard Top all as per drawing and directed.

FD/E6/MAP/08 ( R ) : All as per the item No.1 but hereinbefore Bed Hard MAP all as per drawing and directed

FD-220: Supply and Fix 32 mm dia GI Elbow 3 way with ISI mark embossed all as specified and as directed

FD-220: Labour only for making short rails of length 900mm from long rails obtained from item No 04 hereinbefore by cutting clear piece from long rails and threading both side and fixing to charpoy GI pipe all as specified and as directed including fixing to charpoy GI pipe.

FD-220: Labour only for making legs of length 440mm from old damaged long / short rail obtained from item No 4 and 5 here in before by cutting clear piece with out thread and fixing by welding including removing the existing unserviceable legs. Irrespective of what is shown on drawing the bottom ends of leg shall be plugged with 3mm thick MS sheet welded alround. Length of leg pipe shall be adjusted accordingly to maintain over all height of charpoy as shown on drawing. The welded portion of the GI pipe where galvanising is damaged due to welding shall be given a coat of aluminium paint over a coat of red oxide primer all as specified and directed.

FD-220: Material and Labour for welding to broken / cracked joints of charpoy GI pipe 32 mm dia (ie short rails, long rails, legs etc) and grinding the welding, moulded to have true surface welding as per existing design rest all as specified and directed

FD-E6/MAP/08 (R): Supply and fix Nut and Bolt for assembling of Repaired Bed Hard MAP all as per drawing and directed.

FD-E6/MAP/08(R ): Supply and fix Rubber Shoe for Repaired Bed Hard MAP all as per drawing and directed.

FD-165(M): Supply and Fix top (size 1900 x 685 mm ) of table dining ORs made out of 18 mm thick particle board commercial type covered with 24 gauge aluminium sheet as per drg including taking down the old unserviceable top all as specified and directed.

FD-165(M): Replacement of unserviceable members of frame of table dining OR such as stiffeners and legs etc with 25mm x 25mm x 1.6mm thick square mild steel tube including cutting, gas welding, bending etc as shown on drg and providing one coat of synthetic enamel paint over one coat of red oxide primer to match the previous colour all as specified and directed

FD-1031 : Supply and Fix of locking device of brass bright finish 50 mm size 6 lever with key in duplicate and key holes protector with lid for each lock to including removing the old unserviceable locking device complete for Almirah steel large all as specified and directed

FD-1032 : All as per the item No.12 but hereinbefore Allmirah Medium all as per drawing and directed

FD/E6/MAP/18 : All as per the item No.12 but hereinbefore Allmirah 1/2 H x 1/2 Sh all as per drawing and directed

FD-1031 / FD-243: Supply and fix 3 way locking system made out of 10mm dia mild steel rod including removing the old unserviceable one complete for Almirah large steel all as specified and directed

FD-1031 / FD-243: All as per item No 15 hereinbefore but Almirah medium steel all as specified and directed.

FD/E6/MAP/18: All as per the item No.15 but hereinbefore Allmirah 1/2 H x 1/2 Sh all as per drawing and directed

FD-1031: Supply and Fix chromium plated steel handles of approved quality suitable including taking down the old unserviceable handles for Almirah large steel all as specified and directed.

FD-1032: All as per the item No.18 but hereinbefore Allmirah Medium all as per drawing and directed

FD/E6/MAP/18: All as per the item No.18 but hereinbefore Allmirah 1/2 H x 1/2 Sh all as per drawing and directed

FD-1029: Supply and Fix GI clamps suitable for shelves of lockers steel, fixed with machine screws all as specified and directed.

FD-1031 / FD-243: Material and Labour for replacement of pedestals made out of 1 mm thick PBI sheet including preparation of surfaces and applying two coats of olive green synthetic enamel paint over a coat of red oxide primer including dismantling of old unserviceable pedestal for Almirah large steel all as specified and directed.

FD-1032 / FD-243: All as per item No 22 hereinbefore but Almirah medium steel all as specified and directed.

FD-1029: All as per item No 22 hereinbefore but Locker steel all as specified and directed.

FD-1029: Supply and Fix handle stainless steel / MS anodised 100 mm long “C” type for locker steel after dismantling old unserviceable handles all as specified and directed

FD-1029: Supply and Fix aluminium anodised hasp and staple of size 75mm x 40mm x 3mm thick including taking down the old unserviceable hasp and staples for Lockers steel all as specified and directed.

FD-75(M): (WITH ARM) Supply and Fix Seat for chair CB steel with arms made out of 1st class hard wood (Teak wood) duly canned with 2 mm wide and 0.4mm thick half round plastic cane and border shall be 3 mm flat and shall be fixed to the frame with nut and bolt 75mm long, 4 mm dia duly threaded as per existing drg. Wood surfaces of seat shall be painted with high gloss paint black in tint before canning including taking down the old material all as specified in drawing and as directed.

FD-75(M): (WITH ARM) All as per item No.27 hereinbefore but for back all as specified in drawing and as directed.

FD-75(M): (WITHOUT ARM) All as per Item No.27 hereinbefore but for seat of chair CB steel without arms all as specified in drawing and directed.

FD-75(M): (WITHOUT ARM) All as per item No.27 here in before but for back of chair CB steel without arms all as specified in drawing and directed.

FD-75(M): Supply and Fix mild steel flat iron of size 25 mm x 3 mm as in stiffner and welded to chair CB steel by welding including one coat of red oxide primer all as specified and same as existing size after taking down old unserviceable flat iron all as specified and directed.

FD-75(M): Supply and fix Arms made to shape as per existing pattern of Ist class hard wood (Teak Wood) duly polished with black French polish and fixed to chair CB steel with arms with steel screw 3 mm dia as suitable including taking down old unserviceable arms complete all as specified and directed.

FD/MAP-II/06: Supply and Fix PVC Seat of Chair Verandah (Offrs) MAP including preparation of surfaces and applying two coats of olive white colour synthetic enamel paint over a coat of red oxide primer all as specified and directed.

FD/MAP-II/06 All as per item No 33 hereinbefore but PVC Back of Chair Verandah (Offrs) all as specified and directed

FD/MAP-II/11 All as per item No 33 hereinbefore but PVC Back of Chair Verandah (JCOs) all as specified and directed.

FD/MAP-II/11 All as per item No 33 hereinbefore but PVC Back of Chair Verandah (JCOs) all as specified and directed

FD-1008: Supply and Fix table top of size 900mm x 600mm x 760mm with drawer steel made out of prelaminated particle board 18 mm thick Grade I, Type I, exterior grade with melamine face on one side and white on other side with 4 mm thick teak wood edging fixed with mild steel screws after dismantling the old unserviceable top complete all as shown on drg and as specified and directed

FD-1007: All as per Item No.37 hereinbefore but table 900mm x 600mm x 760mm with out drawer steel all as specified and directed.

FD-1009: All as per Item No.37 hereinbefore but table steel 900mm x 900mm x 760mm all as specified and as directed.

FD-84 / FD-1004: All as per Item No.37 hereinbefore but table office clk steel of size 1200mm x 600mm all as specified and as directed.

FD-84 / FD-1003: All as per Item No.37 hereinbefore but table office Officer steel of size 1680 x 870mm all as specified and directed.

FD-255/FD-383: All as per Item No.37 hereinbefore but Teapoy Verandah all as specified and directed.

FD-84 / FD-1003 / FD-1004 / FD-1008: Supply and fix locking system of Table Office officer / Clk and Table 3' x 2' steel with drawer including taking down old unserviceable locks complete all as specified and directed.

FD-84 / FD-1003 / FD-1004: Carrying out repairs such as gas welding, lapping, turning, rivetting, bolting etc to drawer and make them serviceable condition for Table office steel (Officer/ clk) all as specified and directed.

FD-1008: All as per Item No.44 hereinbefore but Table 3" x 2" with drawer all as specified and directed.

FD-165(M): Material and Labour for applying one coat of synthetic enamel paint including preparation of old steel surface of mild steel tube frame of table dining OR complete all as specified and directed.

FD-77(M): All as per Item No.46 hereinbefore but frame of form without back all as specified and directed.

FD-78(M): All as per Item No.46 hereinbefore but frame of form with back all as specified and directed.

FD-75(M): Material and Labour for applying one coat of synthetic enamel paint (Olive green) to old steel frame of chair CB steel with arm including preparation of surfaces all as specified and directed

FD-75(M): All as per Item No.49 hereinbefore but frame of chair CB steel with out arms all as specified and directed.

FD-256: Material and Labour for applying one coat of synthetic enamel paint (Olive White ) to old steel frame of Chair Varendah including preparation of surfaces all as specified and directed

FD-256 : Removing of the old unserviceable plastic cane and providing new plasic cane of Chair Verandah including prepartion of steel surfaces all as per drawing and directed

FD-243 / FD-1031: Material and Labour for applying one coat (Internal and External surface) of synthetic enamel paint (RFU OG) by spraying with spray machine over old painted surfaces including preparation of existing painted steel surfaces for Almirah large steel all as specified and as directed.

FD-1032 / FD-243: All as per Item No.54 hereinbefore but Almirah medium steel all as specified and directed.

FD-1029: All as per Item No.54 hereinbefore but locker steel all as specified and directed.

FD-106/TP: All as per Item No.54 hereinbefore but rack adjustable steel 6 tier and rack pigeon hole steel all as shown on drawing, all as specified and directed.

FD/E6/MAP/18: All as per the item No.54 but hereinbefore Allmirah 1/2 H x 1/2 Sh all as per drawing and directed

FD-104 (M): All as per the item No.54 but hereinbefore Allmirah Large Glazed Steel all as per drawing and directed

FD-1023: All as per the item No.54 but hereinbefore Rack Side 3 spaces Steel all as per drawing and directed

FD-1003/ FD-84 (M): All as per the item No.54 but hereinbefore Table Office Officer Steel all as per drawing and directed

FD-1004 /FD-84 (M): All as per the item No.54 but hereinbefore Table Office Clerk Steel all as per drawing and directed

FD-1008: All as per the item No.54 but hereinbefore Table 3"x 2" with drawer Steel all as per drawing and directed

FD-1007: All as per the item No.54 but hereinbefore Table 3"x 2" without drawer Steel all as per drawing and directed

FD-1009: All as per the item No.54 but hereinbefore Table 3"x 3" Steel all as per drawing and directed

TP: Removing the existing damaged castor wheels of various type of revolving chairs/ computer Chair of any description and providing with 50mm dia new castor wheel of suitable design and as specified and directed.

TP: Removing the existing damaged / unserviceable / lock of computer tables of any description and providing and fixing new set of lock with duplicate keys of suitable design and as specified and directed.

TP: Removing the existing worn/ torn out form / tapsetry and providing 50mm thick synthetic foam of (32 Kg/Cum density) and tapestry for seat / back of chair writing MAP, Visitors Chairs and variour type of revolving chairs including painting all as specified and directed.

TP: Removing the existing worn/ torn out form and providing 75 mm thick synthetic foam of (32 Kg/Cum density) and tapestry for seat / back of ,Visitors Chairs & variour type of revolving chairs including painting all as specified and directed.

TP: Removing the faded off/ damaged Tapestry Cloth and provididing tapestry cloth cost shall not be less than 390/- per meter of approved quality and shade for Chair Writing MAP, Visitors Chairs and variour type of revolving chairs all as specified and directed.

TP: Removing the existing broken / damaged telescopic channels of key board tray/ drawers of table computer and providing and fixing new telescopic channel to the table computer of smoother functioning key board tray / drawer all as shown on drawing and as directed.

TP: Removing the existing broken glass panes and replacing with 3mm thick float glass for the doors/ shutters of Almirah large steel glass door as per existing pattern all as specified and directed.

FD/E6/MAP/18: All as per the item No.69 but hereinbefore Book Case Steel all as per drawing and directed

TP: Removing the existing damaged/ unserviceable gas lift of chair executive revolving of sorts and providing new gas lift and make good centre pivot mechanism of revolving chair,comuputer chairs etc including tilt tension adjustment complete all as specified and directed.

TP: Removing the existing damaged/ unserviceable pedstal assembly of various type of chair executive revolving of sorts and providing and fixing new pedstal assembly with 5 Nos twin wheel castors complete all as specified and directed.

TP: Removing the existing damaged/ unserviceable polyurethane hand rest of steel chairs of sorts and providing and fixing new one-piece armrest made of black intergral skin polyurethane of scratch and weather resistant and reinforced with MS insert complete all as specified and directed.

TP: Carrying out repairs such as gas welding, lapping, turning, rivetting, bolting etc various type of chairs revolving, Chair writing MAP, Visitors Chairs and make them serviceable condition all as specified and directed

Mahesh Traders

BALAJISTEELINDUSTRIES

SHANMUGA TRADERS

PRIYADARSHINI CONSTRUCTIONS

KASTURILAL HARICHAND OHRI AND SONS

Surabhi Buildcon