Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC 00 BALAJI ENTERPRISES NEW ROAD NEW ROAD RATLAM MADHYA PRADESH 457001 | RATLAM | MADHYA PRADESH | 457001 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹28.6 L+₹64,446 (2.30%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L4₹30.9 L+₹2.9 L (10.5%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder | |
| 4 | L5₹30.6 L+₹2.6 L (9.20%)Rejected-Finance H NO 12 ADRASH SAINIK ENCLAVE HISAR CANTT HARYANA | HISAR | HISAR | HARYANA | 125006 | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Hisar
Garrison Engineer Hisar Military Station Hisar 125006
CA No GE(H)-61/2022-23 COMPREHENSIVE REPAIRS TO WALL AND CEILING INTERNAL AND EXTERNAL AND ALLIED WORKS TO MD ACCN AT DSTV IN THE AOR OF AGE B/R I UNDER GE HISAR AT HISAR MIL STN
2022_MES_563911_1
CA No GE(H)-61/2022-23
Open Tender
Civil Works
Item Rate
270 days
Hisar Mil Stn
As per Tender documents
6 documents required · 6 mandatory
₹500
GE Hisar
₹90,000
Yes
5 Jan 2023
18 Nov 2022
19 Dec 2022
18 Nov 2022
17 Dec 2022
3 Dec 2022
Amount
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.
Dismantling of brick tiles or terracing tiles single layer on roofs complete all as specified.
Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete all as directed.
M&L for cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and as directed.
Roughening and preparation of existing old top surfaces of roof slab by picking, brushing with wire brush for removing caked mud etc, sweeping with brooms and finally fanning the surfaces by mechanical compressor / gunny bags to remove all loose dirt / foreign materials and washing down to remove dust etc complete all as specified and as directed.
M&L for 40mm average thick PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate with maintain the proper slope of the roof & similar surface with and including 15mm thick screed bed in cement mortar 1:3 mixed with and including liquid water proofing compound @200 ML per 50 KG by weight of cement, finished fair & even complete all as specified and directed. Note :- The screed bed shall be provided while the PCC surface is green.
M&L for flush pointing to brick laid flat or brick tile terracing as in roof in CM 1:3 with and including raking out joints / pointing brick work or brick tiles, laid flat, in floors, surface channels, roofs complete all as specified.
Material and labour 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified.
All as per Srl Item No 9.00 but for Fixing only 40mm thick brick tiles as obtained serviceable after dismantling under item No 3.00 complete. Note :- Serviceable brick tiles obtained from Srl Item No 3.00 shall be reused after proper cleaning and washing all as directed.
M&L for non skid ceramic jointless tiles (coloured) 1st quality, 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L for glazed ceramic designer & pattern (dark & light shade) jointfree tiles (coloured) premium quality, 300mm x 200mm x 7mm thick, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash complete all as specified & as directed.
M&L for preparation of old surfaces (plastered or unplastered) of ceilings including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash complete all as specified & as directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of oil emulsion distemper (OBD) of approved shade/tint all as specified & as directed.
M&L for preparing the old decorated plastered /un plastered surfaces of walls including cornices by brooming down or steel wire brushing scrapping down or steel wire brushing scrapping down smoke soot etc. and applying one coat of cement base paint of approved shade/tint on wall surface to give uniform and smooth surface etc complete all as specified and as directed.
M&L for complete removal of existing treatment on walls (any numbers of layers) by scrapping with steel wire brushing or any other means, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots. etc and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer of smae make all as specified & as directed.
M&L for complete removal of existing treatment on walls (any numbers of layers) by scrapping with steel wire brushing or any other means, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots. etc and applying two coats of cement base paint of approved shade/tint over a coat of cement base primer of same make all as specified & as directed.
M&L for applying 2mm thick wall care putty on walls including filling cracks or holes complete all as specified and directed.
M&L for applying 3mm thick epoxy putty on any type of surfaces including filling cracks or holes complete all as specified and directed.
M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.
M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.
M&L rendering 10mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.
M&L for rendering 12mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified.
M & L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces of walls, finished even and fair including mixed with and including liquid water proofing compound @200 ML per 50 KG by weight of cement complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer of same make all as specified & as directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved shade/tint over a coat of cement base primer of same make all as specified & as directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .