Darrang/SDMF/2

Amount

Clearing and grubbing road land including uprooting wild vegatation ,grass, bushes,shrubs,saplins and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned upto lead of 1000 m including removal and disposal of top organic soil not exceeding 150mm in thickness as per technical specification clause 201 ( a ) In area of non thorny jungle

Construction of Embankment with approved Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting p g to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (i) Private Land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pitrs with all lifts and leads, transporting to site,spreading,grading to required slope and compacted to meet requirement of table 300.2 with a lead upto 1000 m. as per technical specification clause 303.1 (a)From Private land

Granular Sub -base with Well Graded Material (Table 400.1) By Mix in place method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. ii ) For Grading II Material

WBM Grading 3 Using stone sceening Type- B 11.2mm for Gr. III Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means.

Inter locking concrete Block pavement Providing and laying interlocking concrete block pavement with M40 grade grade of concrete blocks having thickness 80mm as per technical specification clause 1504 complete including carriage. a) Including Edge block/Edge restraints.

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawings. Three MS plates of 1,6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes post duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to the middle plate by 47mm x 47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrow, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and annexure 1700.1

Providing & fixing of retro – reflectorised cautionary, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm 8 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification Clause 801 i) 600mm equilateral triangle

Providing & fixing of retro – reflectorised cautionary, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm 8 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification Clause 801 i) 600mm circular

Providing & fixing of retro – reflectorised cautionary, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm 8 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification Clause 801 i) 800mmx600mm rectangular

RCC Guard Post: Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top, curing including painting concrete surfaces in 23cm strips upto 0.75m from the top alternately in black and white and having 2 nos. reflective band of desired shade etc. complete as per design and as directed.(a) 30 cm dia. RCC guard post with reinforcement of 6nos. 12mm dia TMT main steel bars and 6mm TMT/ MS stirrups at 15cm c/c.

Supplying and installation of stone facia unit with integrated tail as secondary reinforcement of length 2m that is made of mechanically woven, double twisted hexagonal shaped wire meshm mesh type 10x12 as per IS 16014: 2018, having D=100mm with tolerence of +/-10%, wire dia ID/OD 2.7/3.7mm, Zinc+ High Abrasion Resistant Polymer class A coated, mechanically edged/selvedged and shall have minimum 10 numbers of mesh openings per meter of mesh perpendicular tp twist, with partition at 1m interval etc. (Exclusive of supply and filling of stones) complete as per detailed technical specifications attached and as directed by Engineer in charge. (Analysis Rate ) Size of stone Facia Unit 3x3x1 M (L X B X H)

Providing and laying of drainage composite for use behind walls, between two different fills, alongside drains of road, below concrete lining of canals etc. having thermobonding a draining core-HDPE geonet comprises of two sets of parallel overlayed ribs integrally connected to have a rhomboidal shape with a polyethylene film and a nonwoven geotextile having mass per unit area 130 gsm and tensile strength of 8.0kn/m that will be working as separation or protecting layer, geocomposite having in plane flow capacity of 0.7L/(m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 13.5kn/m, with mass per unit area of 830gsm, at easily accessible location including top and bottom, with all leads and lifts, manpower and machinery, materials labour etc. complete and as directed by Engineer in charge .

Providing and laying one layer of Non woven Geo textile of minimum mass per unit area of 280gms/sqm. having minimum roll width of 5.0m treated with carbon black with physical properties as given in clause no 702.2.3 over 25mm thick compacted sand layer on a prepared subgrade as a filter media with necessary overlaps as per drawing and technical specification and as directed by the Engineer in charge. completed .

Providing and laying of boulder for bed protection with stone boulders of minimum size and weight as table 1300.1, no fragment weighing less than 25kg laid dry complete as per drawing and technical specification Clause 1301 (Excluding carriage charge)

Construction of gravel/soil-aggregate base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 KN static roller to achieve the desired density, complete as per technical specification clause 402. (a)From Private land

Providing & making Gabion structure with mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2018, MORTH Clause 2500, of required size Mesh Type 10x12 (D=100mm with tolerance of plus-minus 2% ) , Zinc + 10% AI ALLOY+ PVC coated, Mesh wire diameter 2.7/3.7mm (ID/OD), mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 16 numbers of openings per meter of mesh perpendicular to twist , tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @ by weight of Gabion boxes, as per drawing, all complete as per directions of Engineer in Charge. ( Aalysis Rate )

Construction of narrow filter subsurface drain consisting of porous or [erforated pipe laid in narrow trench surrounded by a geotextile filter fabric, with a minimum of 450mm overlap of fabric and installed as per clause 702.3 and 309.3.5 including excavation and backfilling.

Excavation loose scaling along with dismantling of existing structures by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m as directed by the Engineer-in-charge.

Non-structural measures Local Awareness Programme Providing , arranging local awareness programme complete as directed by the Department.

Vetting Charge 1% for IIT Guwahati Quated rate of bidder at calumn No. (13 ) should be same as mentioned in the column (6)

SRI AMAL BARUAH (BID ID -278331)