Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.3 CrAccepted-AOC | ₹19.3 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹19.4 CrRejected-AOC | ₹19.4 Cr | L2 | Rejected-AOC L2 |
| 3 | L3₹20.7 CrRejected-AOC 114 115 FIRST FLOOR AURORA TOWER EAST WING MG ROAD PUNE 411001 | PUNE | PUNE | MAHARASHTRA | 411001 | ₹20.7 Cr | L3 | Rejected-AOC L3 |
| 4 | L4₹22.9 CrRejected-AOC SATNA MADHYA PRADESH 485005 | SATNA | MADHYA PRADESH | 485005 | ₹22.9 Cr | L4 | Rejected-AOC L4 |
| 5 | L5₹23.7 CrRejected-AOC D 90 OKHLA INDUSTRIAL AREA PHASE 1 NEW DELHI NEW DELHI DELHI 110020 | SOUTH EAST DELHI | DELHI | 110020 | ₹23.7 Cr | L5 | Rejected-AOC L5 |
Tender Value
₹22.6 Cr
EMD Value
₹45.1 L
Closing Date
22 Jul 2020, 4:00 pmClosed
SE (AUTOMATION,N/M, SP)
VIDYUT BHAWAN, JYOTI NAGAR, JAIPUR
Design, Manufacture, testing at works and supply of 132 kV Single core XLPE cable for establishing of 132 kV Single Circuit (500 Sq. mm) between proposed 132 kV Aravali Marg substation and existing 220 kV substation Mansarovar (Jaipur) (Approx. 4 km
2020_RRVPN_188424_1
RVPN/EHV/ASP/TN-55
Open Tender
Electrical Works
365 days
JAIPUR
Please refer Tender documents.
4 documents required · 4 mandatory
₹17,700
SR AO (EA AND CASH) RVPN
₹45.1 L
30 Jul 2021
1 Jul 2020
22 Jul 2020
1 Jul 2020
22 Jul 2020
15 Jul 2020
MAIN MATERIAL/ ITEMS
Under ground cable Section
132kV, Single Core, 500mm2, XLPE Copper Cable
145kV rated Voltage Pre-moulded Straight Through Joint suitable for above cable
145kV rated Voltage Pre-moulded Straight Through Joint (with provision for sheath separation for cross bonding) suitable for above cable
145kV rated Voltage pre-moulded Outdoor end termination Kit complete with accessories suitable for above cable
145kV Plug in type pre moulded end termination kit complete with accessories suitable for above underground cable and suitable for termination in GIS type switchgear
Galvanized steel supporting structures/ arrangement etc for suitable and safe termination of XLPE cable to GIS switchgear
Solid bonding Link box with Link plates, bonding & grounding cable complete with other associated accessories for 1-phase
Cross bonding Link box, Co-axial bonding cable, Sheath Voltage Limiters (SVL) complete with other associated accessories for each 3-phase circuit
Galvanized Steel supporting structures/ arrangement, Gantry structures, Ladders etc. for suitable and safe terminations of XLPE cable from Terminal towers maintenaing statutory clearances and safety as per IE rules
Earthing Material including cast iron pipes with suitable clamps, charcol, common salt etc. (for each circuit)
Terminal connector suitable for ACSR Panther on the item No. 6 to connect cable end termination to Outdoor Switchyard Equipment.
Warning Tapes as per Specification
Optical Fiber Cable and associated accessories/items as per specification
OPGW & associated accessories/ items as per specification
OFAC/OFC and hardware fittings/ accessories alongwith associated Fibre optic Distribution Panel & accessories
132kV class of 120kV rating LA with grading ring, discharge counter with milli meter
Add: Any other item bidder may require to complete the Cable System as per specification requirements
Description of Work / Item(s)
Service part
Part - A - Route (4 kM) : 220 kV GIS Mansarovar - 132 kV GIS Aravali Marg, Mansarovar (Proposed)
SURVEY
Surveying of cable route excavation of trial holes as per field requirement, prepartion of cable route profile, drawings for cable laying , final route alignment, marking lines & grades/prepartion of final cable route darwings after approval & preparing bill of materials for complete route shown in drawings i.e. between terminal sub stations.
Evalutions of thermal resistivity of soil along cable route (as per tecnical specifications)
Cable Installation:
Handling,Transportation to site & laying of 132 KV, single core, 500 Sq mm XLPE Copper cable as per foregoing specification requirements.
Establishing of 1 single Ckt. having 3 nos. 132kV single core, 500 sq. mm copper cable in trefoil formation alogwith pilot fiber cable, providing of Warning tape taging fixing, pipes for drain & gate crossing as per drawings and specifications in trench by pulling, drawing, etc. including cables, using standard cable installation equipments and as per directions of the engineer in charge and returning of unused items in Store.
Handling & making of straight through joints for 132 KV, single core, 500 Sq mm power cable (XLPE copper cable) as per specification.
Handling and making of straight through joints (with provision for sheath separation for cross bonding) for 132 kV single core power cable as per specifcation.
Handling & making of plug in type premoulded end termination for 132 KV, single core, 500 Sq mm power cable (XLPE copper cable) in GIS switchgear as per specification.
Installation of Galvenized Steel Structure/ arrangement, etc. for suitable and Safe Terminations of XLPE Cable to GIS switchgear
Installation of solid bonding Link box with Link plates, bonding & grounding cable complete with other associated acessories for 1-phase.
Installation of Cross bonding Link box, Co-axial bonding cable, Sheath Voltage Limiters (SVL) complete with other associated acessories for each 3-phase circuit.
Installation of Earthing material including cast iron pipes with suitable clamps, charcol, common salts etc. complete set for each cable circuit (each having 3 core)
Installation of Underground Optical Fiber Cable and associated accessories/items as per specification alongwith XLPE cable at both ends at Substations.
Charges of conducting pre commissioning tests as per specification & successful commissioning of circuit
Add: Any other item bidder may require to complete the installation work as per specification requirements
CIVIL WORKS
Cutting Black Bitumen surface upto any depth including all layers of crust for laying Power Cables etc, staking of useful material and disposal of surplus debries including all leads including barricading, providing danger board/diversion board, lighting, reflectors etc.
Earth work in excavation for burried cable trenches/foundations including dressing of sides and ramming of bottoms, lift upto 2.5 mtr. including taking out the excavated soil & backfilling of jhiri with watering & ramming ,timbering & shoring ( wherever required ) disposal of surplus excavated soil as directed with all lead and lift including barricading, providing danger board/diversion board, lighting, reflectors etc.
Horizontal Direct Drilling (Trenchless Digging) method (with 250 mm HDPE pipe of minimum 6PN and strength complying to relevant ISS) wherever open cut method cannot be adopted (For 3-Ph single Circuit formation) (If required)
Poviding and laying of Cement concrete including curing, etc using stone aggregate 40 mm nominal size (crusher broken) in foundation plinth, excluding the cost of shuttering using 1 cement: 4 sand: 8 stone aggregate (For equipment foundation, junction box etc.)
P&L cement concrete in R.C.C. work in foundation,rafts,footings,strap beams, bases of columns etc.,'including curing ,compaction,finishing with rendering in cement sand mortar 1:3 (1cement :3 sand) and making good the joints, excl., the cost of centering and shuttering and reinforcement :M-20 grade mix 1:1.5:3 (1cement:1.5coarse sand : 3 graded stone aggregate 20 mm nominal size (For equipment foundation, junction box , culvert etc.)
Brick wall works, if required
Providing and fabricating steel reinforcement for R.C.C. work bending ,placing in position and binding complete including cost of binding wire in foundation ,raft footing ,strap beams base of column etc., up to plinth level hot rolled deformed (I.S.1139) cold twisted (I.S.1786)bars (For equipment foundation, junction box \ etc.)
Centering and shuttering with plywood or steel plates including strutting, propping bracing both ways with wooden members and removal of formwork for superstructure up to 4.5m height above plinth level for (For equipment foundation, junction box etc.)
Providing & Fixing of steel febrication made of angles, tees, square bars or other flats black pipe with hold fast and fittings complete as per design @ drawing including cutting welding & fabrication with priming coat of redoxide.
Providing,Laying & Jointing RCC class NP-2 Non Pressure pipes (IS:458 Mark) of approved make with collars, jointed with CM 1:2 or having Spigot & socket ends with flexible rubber rings joint including testing of joints etc. complete: 450 mm D.
Providing & Fixing of Reinforced Ferro Cement Cable Trench Covers designed for 'A' & 'AA' loading duly marked on cover with adequate reinforcement having thickness 75mm to 100 mm anti corrosive bitumen pained MS plate Rim & MS lifting hooks admixtures like plasticizer bond -improving compound, shrinkage resistance compound, abrasion resistant complete as per approved design ( For cable joint box) (For any span)
Providing & Laying HDPE pipe heavy duty of approved make jointed with solvent cement
(i) 250 mm dia. (for 3 phase formation)
(ii) HDPE PLB Duct for Optical Fiber Cable
Supply and laying inter locking RCC cable covers as per approved drawing
Supply, spreading of clean river sand in the cable trench and cable joint pit as per specification.
Providing & Fixing Cable Route Marker along the route of cable at the spacing of 50 meter etc. as per drawing and site requirement.
RR Stone masonary in F/P CSM 1:4
Plastering 20 mm thickness CSM 1:6
Providing & laying plane cement concrete M20 Grade
Add: Any other item bidder may require to complete the installation work as per specification requirements
Part - B - Route (3 kM) : LOC No. 24 of Heerapura - Sanganer 132 kV Line - 132 kV GIS Aravali Marg, Mansarovar (Proposed)
SURVEY
Surveying of cable route excavation of trial holes as per field requirement, prepartion of cable route profile, drawings for cable laying , final route alignment, marking lines & grades/prepartion of final cable route darwings after approval & preparing bill of materials for complete route shown in drawings i.e. between terminal sub stations.
Evalutions of thermal resistivity of soil along cable route (as per tecnical specifications)
Cable Installation:
Handling,Transportation to site & laying of 132 KV, single core, 500 Sq mm XLPE Copper cable as per foregoing specification requirements.
Establishing of 1 single Ckt. having 3 nos. 132kV single core, 500 sq. mm copper cable in trefoil formation alogwith pilot fiber cable, providing of Warning tape taging fixing, pipes for drain & gate crossing as per drawings and specifications in trench by pulling, drawing, etc. including cables, using standard cable installation equipments and as per directions of the engineer in charge and returning of unused items in Store.
Handling & making of straight through joints for 132 KV, single core, 500 Sq mm power cable (XLPE copper cable) as per specification.
Handling and making of straight through joints (with provision for sheath separation for cross bonding) for 132 kV single core power cable as per specifcation.
Handling & making of outdoor type cable end termination for 132 KV, single core, 500 Sq mm power cable (XLPE copper cable) as per specification.
Handling & making of plug in type premoulded end termination for 132 KV, single core, 500 Sq mm power cable (XLPE copper cable) in GIS switchgear as per specification.
Installation of Galvenized Steel Structure/ arrangement, etc. for suitable and Safe Terminations of XLPE Cable to GIS switchgear
Installation of Galvenized Steel Structure/ arrangement, Gantry structures, Ladders etc. for suitable and Safe Terminations of XLPE Cable from Terminal Towers maintaining statutory clearances and safety as per IE Rules
Installation of 132 kV class of 120 kV rating Surge Arrestors with grading ring, dicharge counter with Milli meter
Installation of solid bonding Link box with Link plates, bonding & grounding cable complete with other associated acessories for 1-phase.
Installation of Cross bonding Link box, Co-axial bonding cable, Sheath Voltage Limiters (SVL) complete with other associated acessories for each 3-phase circuit.
Installation of Earthing material including cast iron pipes with suitable clamps, charcol, common salts etc. complete set for each cable circuit (each having 3 core)
Installation of Terminal connector suitable for ACSR Panther conductor to connect cable end termination to outdoor switchyard equipments/ Surge Arrestors.
Installation of Underground Optical Fiber Cable and associated accessories/items as per specification alongwith XLPE cable at both ends at Substations.
OPGW & associated accessories/ items as per specification
Installation of OFAC/ OFC Cable and associated accessories/items alongwith associated Fibre Optic Distribution Panel and accessories as per specification requirements
Charges of conducting pre commissioning tests as per specification & successful commissioning of circuit
Add: Any other item bidder may require to complete the installation work as per specification requirements
CIVIL WORKS
Cutting Black Bitumen surface upto any depth including all layers of crust for laying Power Cables etc, staking of useful material and disposal of surplus debries including all leads including barricading, providing danger board/diversion board, lighting, reflectors etc.
Earth work in excavation for burried cable trenches/foundations including dressing of sides and ramming of bottoms, lift upto 2.5 mtr. including taking out the excavated soil & backfilling of jhiri with watering & ramming ,timbering & shoring ( wherever required ) disposal of surplus excavated soil as directed with all lead and lift including barricading, providing danger board/diversion board, lighting, reflectors etc.
Horizontal Direct Drilling (Trenchless Digging) method (with 250 mm HDPE pipe of minimum 6PN and strength complying to relevant ISS) wherever open cut method cannot be adopted (For 3-Ph single Circuit formation) (If required)
Poviding and laying of Cement concrete including curing, etc using stone aggregate 40 mm nominal size (crusher broken) in foundation plinth, excluding the cost of shuttering using 1 cement: 4 sand: 8 stone aggregate (For equipment foundation, junction box etc.)
P&L cement concrete in R.C.C. work in foundation,rafts,footings,strap beams, bases of columns etc.,'including curing ,compaction,finishing with rendering in cement sand mortar 1:3 (1cement :3 sand) and making good the joints, excl., the cost of centering and shuttering and reinforcement :M-20 grade mix 1:1.5:3 (1cement:1.5coarse sand : 3 graded stone aggregate 20 mm nominal size (For equipment foundation, junction box , culvert etc.)
Brick wall works, if required
Providing and fabricating steel reinforcement for R.C.C. work bending ,placing in position and binding complete including cost of binding wire in foundation ,raft footing ,strap beams base of column etc., up to plinth level hot rolled deformed (I.S.1139) cold twisted (I.S.1786)bars (For equipment foundation, junction box \ etc.)
Centering and shuttering with plywood or steel plates including strutting, propping bracing both ways with wooden members and removal of formwork for superstructure up to 4.5m height above plinth level for (For equipment foundation, junction box etc.)
Providing & Fixing of steel febrication made of angles, tees, square bars or other flats black pipe with hold fast and fittings complete as per design @ drawing including cutting welding & fabrication with priming coat of redoxide.
Providing,Laying & Jointing RCC class NP-2 Non Pressure pipes (IS:458 Mark) of approved make with collars, jointed with CM 1:2 or having Spigot & socket ends with flexible rubber rings joint including testing of joints etc. complete: 450 mm D.
Providing & Fixing of Reinforced Ferro Cement Cable Trench Covers designed for 'A' & 'AA' loading duly marked on cover with adequate reinforcement having thickness 75mm to 100 mm anti corrosive bitumen pained MS plate Rim & MS lifting hooks admixtures like plasticizer bond -improving compound, shrinkage resistance compound, abrasion resistant complete as per approved design ( For cable joint box) (For any span)
Providing & Laying HDPE pipe heavy duty of approved make jointed with solvent cement (Open Road Cut method)
(i) 250 mm dia. (for 3 phase formation)
(ii) HDPE PLB Duct for Optical Fiber Cable
Supply and laying inter locking RCC cable covers as per approved drawing
Supply, spreading of clean river sand in the cable trench and cable joint pit as per specification.
Providing & Fixing Cable Route Marker along the route of cable at the spacing of 50 meter etc. as per drawing and site requirement.
RR Stone masonary in F/P CSM 1:4
Plastering 20 mm thickness CSM 1:6
Providing & laying plane cement concrete M20 Grade
Add: Any other item bidder may require to complete the installation work as per specification requirements
Maintenance Service [ these charges shall be applicable after the completion of garaunteed performance period of cable system for 4 years excluding of item/ material/ equipment already covered for performance garauntee of 5 years. The charges shall be paybale on actuals
Maintenance services per visit towards any breakdown of cable system which includes services of expert engineers, technicians alongwith necssary tools/ tackles, testing equipments, fault locating equipments to detect the faults and its subsequent ractification, re-testing and restoring the electric supply through cable system
Description of Work / Item(s)
Total Schedule No. BOQB1
SUPPLY PART
Total Schedule No. BOQB2
SERVICE PART
Universal Cables Limited
Sterlite Power Transmission Limited
Rahul Cables Pvt Ltd
KEC INTERNATIONAL LTD
Universal Cables Limited
Rahul Cables Pvt Ltd
KEC INTERNATIONAL LTD
Sterlite Power Transmission Limited
Universal Cables Limited
Rahul Cables Pvt Ltd
Sterlite Power Transmission Limited
KEC INTERNATIONAL LTD
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid