REPAIRS TO COMPOUND WALL, FENCING, HARD STANDING, FOOTPATH, GATES AND ROLLING SHUTTERS AND CONNECTED WORKS AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Amount

Demolition of brick or stone/ boulder built in cement mortar, complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exceeding 6 M mean radius built in CM 1:4 etc, complete all as specified and directed.

All as per item No.2 above but except bricks (serviceable bricks obtained out of dismantling shall be made use of), complete all as specified and directed.

M&L for walling of random rubble masonry uncoursed, Secunderabad type well bonded, bedded and solidly hearted in cement mortar 1:6 etc, complete all as specified and directed.

All as per item No.4 above but except stones (serviceable stone obtained from dismantling shall be made use of under this item), complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in copings, complete all as specified and directed.

Labour only for Raking out joints/ pointing to random rubble uncoursed/ coursed or brought up to courses built in cement mortar, complete all as specified and directed.

M&L for raised pointing/ rubbed / V pointing to random or polygonal rubble, coursed or brought upto courses in cement mortar 1:4, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Rendering 10 mm thick on fair faces of stone masonry surfaces in CM 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

Dismantiling of mild steel work of any description not other wise provided for completed all as specified and as directed.

Dismantling of hanger doors, complete all as specified and directed by Engineer-in-charge.

S&F MS framed work as in hanger door, (or) other sections with gusset plate rails braces etc complete drilled for fixing of steel sheeting (or) other covering to doors etc to be prepared for hanging (or) sliding with and including either hooks and pintel hinges (or) steel hanging door etc. including covering sheet complete all as specified and directed by Engineer-in-charge.

S&F in repair top/bottom wheel of minimum 75mm dia for sliding doors including all necessary fittings, fixtures and anchor fasteners for hanger door complete all as specified and directed.

S&F MS Angle/ flate iron/chanel framed work such as iron gate, ladder, SWT frame, grills, gratings, framed guard bars, etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165, complete all as specified and directed.

Dismantling expanded metal, any thickness or mesh not exc 4 kg weight per sqm, fixed with steel or wood fillets, if any completed all as specified and as directed

S&F welded steel wire fabric to angle iron frame not exc 4 Kg weight per square metre completed all as specified and as directed

Dismantling fencing post/struts (steel/ RCC/wooden) of any section including taking out embedded portion and making good disturbed ground, post embedded in cement concrete/natural ground, complete all as specified and directed.

M&L for MS angle iron conforming to Fe- 290(Gde E 165) as in fencing post, complete all as specified and directed.

M&L for Two coats of synthetic enamel paint over one coat of red oxide including preparation surface Complete all as specified and as directed

M&L for preparing steel and iron surfaces of any description n.exc 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed.

Excavating in post holes in hard/dense soil not exc. 0.50 cum and getting out, return filling and removing surplus soil to a distance not exc. 50 mtrs and making good disturbed ground, complete all as specified and directed.

M&L for PCC 1:2:4 type B2 ( using 40 mm graded aggregate) for angle iron post Complete all as specified and as directed

M&L for Providing reinforced cement concrete type B-1, 1:2:4(20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed Complete all as specified and as directed

Supply ony Chain link of size MS galvanised fencing any size or type, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard, rails, straining bolts etc., including provision of binding wire Complete all as specified and as directed

M&L for Mild steel round bars 10 mm dia and over, cut to length, bent to required shape including cranking, hooking ends and securing with welding with 10 cm overlaping between two bar all as specified and directed.

M&L for Flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe- 290(Gde E 165) Complete all as specified and as directed

Supply & fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n exc 10cm long and dia of neck 11 to 15 mm, complete all as specified and directed.

S & F in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 90mm to 110mm spacing and straing and fixing to any type of standard rails straining bolts, incluing securing or typing a crossings with an provision of galvanize mild steel wire, staples or steel pins, etc all as directed (each line wire to be measured) in repairs completed all as specified and as directed

All as above item No.28 but fixing only completed all as specified and as directed

Demolition of cement concrete (unreinforced) of any description and in any position and disposed off to a distance exc. 50 mtrs and not exc. 250 m, complete all as specified and directed.

M&L for hard core of gauge n. exc 63 mm deposited, spread , traveled in layer, waters, water and rammed to a true surface, complete all as specified and directed.

M&L PCC 1:3:6, type C-1 (40 mm graded agg ) for plinth protection 75 mm thick, finished without using extra cement, complete all as specified and directed.

Dismantling of floor tile, herth, wall tiling and tiles of any description of thickness including cement mortar bedding and rubbish off the premises complete all as specified and as directed

M&L for sand filling under floors of interlocking tiles including watering and consolidation complete all as specified and as directed

M&L for machine pressed precast concrete with grey cement and pigment interlocking paver block any shape and size confirming to IS-15658- 2006 of 50 to 60 mm thickness M-40 grade with gray cement, complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (40 mm graded agg) for sub base of floor 75 mm thick complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 (12.50 mm graded agg) for 40 mm thick in floor, complete all as specified and as directed

M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying of floor finis, complete all as specified and as directed

M&L for Colour Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick with grey cement and no pigment set ionted and pointed in neat cement slurry colour to match in floors complete all as specified and as directed

M&L for PCC 1:2:4, type B1 (40 mm graded agg) for 75 mm thick path/ flooring without using extra cement complete all as specified and as directed

M&L for glass dividing strips 3mm thck & 38mm width inserted in position and confirming to design complete all as specified and directed.

Removing excavated material/soils / Debris to a distance exc. 500 mtrs and not exc.1500 mtrs, depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and as directed

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

M&L for Reinforced Cement Concrete Type A1 1:1.5:3 (using 20 mm graded granite stone aggregate) in foundations including rafts, footings and mass concrete completed all as specified and as directed

M&L for Reinforced Cement Concrete Type A1 1:1.5:3 (using 20 mm graded granite stone aggregate) in Columns, piers, posts and struts completed all as specified and as directed

S&F Mild steel Bands, straps, supports pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde-E-165 completed all as specified and as directed

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality, complete all as specified and directed.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.

M&L for broken glass coping on top of walls in cement mortar 1:3 complete all as specified and directed completed all as specified and as directed

M&L for Providing servicing/ greasing to Steel rolling shutters where ever directed and specified, servicing/ greasing to all parts of a rolling shutter including guide channels, hood covers, gear rods, laths, lock rails, bearings, chains and other connected parts of all types of rolling shutterts, taking down the rolling shutter in any postion and any type where ever directed by Engineer In charge and caaryout the repairs/ servicing / greasing and making into smooth operational condition as directed by Engineer In charge, top cover, anchoring rod, hasp and staple erected in same position or any other openings as indicated and as directed, in repairs, complete all as specified and directed.

M&L for Steel rolling shutters, Thickness of laths 1mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, in repairs complete: push pull or manual type, complete all as specified and directed.

M&L for Safety lever locks mild steel with 4 levers for rolling shutters in repairs complete: push pull or manual type complete all as specified and as directed

M&L for Ball bearing for rolling shutters in repairs complete: push pull or manual type, complete all as specified and directed.

M&L sand filling (river sand) including watering and consolidation in firing range complete all as specified and as directed

M&L for Shingle filling in floors or pavings, laidin layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and directed.

M&L for filling saw dust mixed with river sand in specified proportion as directed by engineer in charge and complete filling in stop butt areas including removal of existing material/ filling in stop butt complete all as specified and directed. Note: River sand shall be measured and paid separetely under relevant item

saradhi construction combines

M/S DIVIJA BUILDERS

SN POWER TECH