Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.1 Cr
EMD Value
₹6.1 L
Closing Date
6 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Overhaul Division, Nasik
Aircraft Overhaul Division, Nasik
Construction of Vehicle Parking Shed at ATC,CTP and Outside of Factory Area at HAL, Nasik
9207
NK/FW/CAP-1586/2024-25
Works
Mig Complex - Aircraft Overhaul Divn - Nasik - Works - Contracts
₹0
₹6.1 L
6 Sept 2024
8 Aug 2024
8 Aug 2024
6 Sept 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,
Address for correspondence:
PAN No.:
Contact details
I.T Returns for past 03 years (Assesment Year)
Related Document to be Uploaded to eProcurement Portal.
Average annual financial turn over during the last 3 years (Financial Year), ending 31st March 2023 of the previous financial year /Accounting year [ should not be less than 30% of Amount put to tender]
TURN OVER (Rs. In Lakhs)
Related Document to be Uploaded to eProcurement Portal. Profit & loss statement duly certified by CA with UDIN
ESIC , PF & GSTIN Nos with proof
Related Document to be Uploaded to eProcurement Portal.
Bank(s) details: [Copy of the cheque leaf to be uploaded]
ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal. And hard copy of original ECS and cancelled cheque to be submitted to address mentioned in e-tender notice for refund of EMD or payment etc(New bidder).
Latest Bankers Solvency Certificate from Nationalized or Scheduled Bank issued within a period of 12 months from the final date of Submission of Tender. (Should not be less than 40% of the Approx. estimated amount put to tender.)
Related Document to be Uploaded to eProcurement Portal.
Experience of having successfully completed similar works "(As per "Work Details" table of Etender notice) ." during last 7 years ending on previous day of last day of submission of tender should be either of the following. [Latest work experience (completion) certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost of Amount put to the tender OR (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost of Amount put to the tender OR (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost of Amount put to the tender
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Value of the existing commitments and on-going works (Works in hand/in progress) to be completed in the next 09 months. (Work on Hand)
Related documents to be uploaded in eprocurement portal. Work on Hand. This statement should be submitted duly verified and certified by Chartered Accountant
Value of the work executed in last five years(Financial year wise)
Assessed Available Bid Capacity =2xAxN-B
License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies (applicable for Electrical works combined with Civil works)
Bank Balance statement for last three months.
Details of latest overdraft facilities available with bank.
Details of plant & Machinery for the work.
Proposed work completion schedule in the form of bar- chart.
Details of person holding the power of Attorney.
Related Document to be Uploaded in eProcurement Portal.
Acceptance by party for Scope of work as per BOQ and Tender terms & conditions
DECLARATION
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to146) including price bid do hereby accept all the terms and conditions laid down
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer.
Specification
Felling trees of the girth (measured at a height of 1 m above ground level) grubbing up tree trunk including cutting of trunks and branches, protruding over ground ,digging out roots ,filling holes and levelling off ground and stacking of serviceable material and disposal/removing of unservicable material to a distance not exceeding 50 m and clearing site complete all as directed by EIC/OIC.
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. Excavation in all kinds of soil.
Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width ) including getting out and disposal of excavated earth lead upto 50 m and for all lift , as directed by EIC/OIC. All kinds of soil
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. Excavation in all kind of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). . Complete all as specified and directed by EIC/OIC.
Providing and fixing Centering and shuttering including strutting, propping etc. and removal of form for concrete foundation , footing , bases of column, mass concrete , and similar work, Complete all as specified and directed by EIC/OIC.
Providing and fixing Centering and shuttering including strutting, propping etc. and removal of form for concrete Edges of slabs and breaks in floors and walls and similar work, Complete all as specified and directed by EIC/OIC. For under 20 cm wide
Provinding and laying in position Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing wih clips complete all as specified and directed by EIC/OIC (authorized laps and chairs will measured and paid). Upto plinth level with Thermo-Mechanically Treated bars of grade Fe-500D or more.
Providing and laying in position 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
Filling, spreading and leveling with available excavated earth (excluding rock), HAL murrum (excavated under item no 3 &4 above) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, including compacting each layer by mechanical/power rolling / ramming and watering, lead up to 50 m and for all lift etc. complete as per drawing as specified and as directed by EIC/OIC.
Filling, spreading and leveling with HAL murrum in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, including excavation for HAL murrum as per direction from any location up to 5 km, by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out, loading, transporting, unloading, for all lifts including compacting each layer by mechanical/power rolling / ramming and watering all complete as per drawing as specified and as directed by EIC/OIC.
Supplying, stacking at site, laying, spreading and compacting stone aggregate of 90 mm to 45 mm size stone aggregate to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density complete all as specified and directed by EIC/OIC.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level with 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) laid to required slope/camber in panels as required including consolidation finishing and tamping complete. All as specified as directed by EIC/OIC.
Providing and constructing of brick wall straight or curved on plan to any radius in CM 1:4 above or below ground at any height and level using class B bricks including necessary scaffolding, curing complete as specified and as directed and as directed by the EIC/OIC,. (Brick of class designation 35kgf/cm2)
Providing and rendering 15 mm thick plain cement plaster in cement morter 1:6 on fair faces brick work or concrete surface including providing extra cement finish to smooth and even surface & curing etc complete as specified and as per direction of EIC/OIC.
Proividing, fabricating, hoisting and erecting in position Steel work in built up tubular sections (round, square or rectangular hollow tubes etc.) trusses, purlines, bracing etc., including cutting, hoisting, fixing in position as per design/drawing or as directed and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers, necessary connection such as cleats, base plates, nuts, bolts, holding down bolts, welding welding drilling, threading, notching, etc complete as directed by EIC/OIC.
Painting with two coats of approved quality and shade synthetic enamel paint of approved brand to give an even shade complete all as specified and as per direction of EIC/OIC.
Providing & fixing in position colour coated corrugated galvalume sheet of 0.50 mm thick (total coated thickness) having high tensile strength of 550 mpa, with metallurgical coating of zinc aluminium alloy of 150 grams /Sqm (AZ 150) (both side inclusive ) conforming to ASTM -792 & AS 1397 having profile depth approximate 28mm high rib with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg for roofing / cladding/ridge including sheet shall be fastened with 40μm zinc coated or 25μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners with neoprene/EPDM washers. The sheet will have coating of minimum 20 microns of painting over corrosion inhibiting primer (min 5 micron) on top side & standard backing coat on reverse side. All penetrations and laps shall be sealed with silicon or equivalent sealants while laying the sheet. End overlap wherever required shall be minimum 150 mm & side lap are full rib as per manufacture catalogues.
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/ spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
Providing and applying tack coat using hot straight run bitumen of grade VG - 30 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications by wire brushing : On W.B.M. @ 0.75 Kg / sqm.
Providing and laying bituminous macadam using crushed stone aggregate of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of EIC/OIC. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
Providing and applying tack coat using hot straight run bitumen of grade VG - 30 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications by wire brushing : On bituminous surface @ 0.50 Kg / sqm.
2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone chippings of 13.2 mm size and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). With paving Asphalt grade VG - 30 with no solvent
Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 30 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface, including rolling and finishing with power road roller all complete.
Rupees Two Crore Fifty Nine Lakh Twenty Four Thousand Four Hundred Sixty Three and Sixty Two Paise Only
Approximate Basic Amount Put to Tender
Rupees Forty Six Lakh Sixty Six Thousand Four Hundred Three and Forty Five Paise Only
Rupees Three Crore Five Lakh Ninety Thousand Eight Hundred Sixty Seven and Eight Paise Only
Rupees Three Crore Five Lakh Ninety Thousand Eight Hundred Sixty Seven and Eight Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
ETendernotice.pdf
TENDER_DOCUMENT • 0.53 MB
Prequalification_profile..xlsm
TENDER_DOCUMENT • 0.02 MB
ECSDETAILS.PDF
TENDER_DOCUMENT • 0.16 MB
Tender_Document1586.pdf
TENDER_DOCUMENT • 1.63 MB
CarParkingShadeDWG..PDF
TENDER_DOCUMENT • 0.71 MB
price_bid..xlsm
TENDER_DOCUMENT • 0.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .