RE-CARPETING OF APPROACH AND INTERNAL ROAD AT ICGAS(CHN) UNDER GE(I) CG CHENNAI

Amount

Material and labour for Premix bituminous, macadam with 4.0% binder content by weight of total mix using Paving Bitumen ,any penetration of viscocity VG 30 , laid/rolled and compacted to required gradient and camber (Consolidated thickness of 75 mm or less for undulations and depressions on road complete all as specified and as directed.

Material and labour for preparing black top surfaces of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.

Material and labour applying evenly a priming/tack coat with bituminous primer using paving bitumen of viscocity VG 30 at the rate of 5 Kg per 10 Sqm over black top surface complete all as specified and as directed.

Material and labour for Bituminous Premix Semi dense Asphaltic concrete using hot mix plant 40mm thick consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen of viscocity VG 30, levelled,rolled wtih 8 to 12 tonne tandem vibratory roller and compacted to required camber and gradient using Mechanical Paver complete all as specified and as directed. Note:The binder content is indicated tentatively and shall be as per acutal mix design.

Material and labour for road marking strips, lines ,dashes arrows,zebra crossings , letters etc of 2.5mm thick(reflective type) on new surfaces of road/pavements and the like exceeding 10 cm wide with hot thermo plast material @5 kg/sqm of white or golden yellow by applying with fully automatic paint applicator machine ,fitted with profile shoe,glass beads dispenser by providing drop on glass beads @ 0.25 kg/sqm applying with propane tank heaters and profile shoe heater etc driven by the skilled opearator on road surface complete all as per MORTH specifications complete all as specified and as directed.

Supply and fixing of solar stud of tata mke Made of Aluminum Die Cast Matte Finish (Sand Blasted), conforming to IS 617:1994 Designation 4520 Compressive strength 179 Kn with min 122 x 132 x 21mm Tested as per IP 65 in accordance with IS 12063:1987 Category 2 for protection against water ingress. Tested as per IEC 1215 (between -40 to +85 degrees centigrade) Found be working satisfactorily for 125 hrs. Tested as per QM333 complete all as specified and as directed.

S&F for Reflective Road Stud Cat eye size 115 X 87 X 18mm ABS Plastic material Shell ABS + Lens Acrylic, weight 100grams (+/-) 5 gram & colour Yellow complete all as per specification and direction by Engr In charge.

S & F for Dual directional Speed Breaker having high intencity cube corner refelctor ultra sonic welded to high impact resitant radious plastic body of colour yellow and block of size 250 X 345 X50mm high provided with for steel nails of dia 12mm and length 120mm for fixing to row by hammaring shape of side body to have interlocking pattern to all speed breakers in a row.

S&F for Road safety Convex mirror of 60 Cm Dia polycarbonate Convex Mirror with 130 Degree + actual viewing angle, equipped with adjusting swivel and mounting for infinite adjustments complete all as per specification and direction by Engr In charge.

k.sundarrajan and sons

B.S.CONSTRUCTIONS