Mo various colonies under South Zone

Amount

Deployment of skilled & un- skilled labour for maintenance work whenever required as per direction of Engineer-in-Charge. (a)fitter (Skilled)

(b) carpenter (Skilled)

(c) Unskilled Labour (Beldar)

(d) Blacksmith with welding machine & rods (Skilled)

Providing toilet paper roll a) C.P Brass

Providing PTMT liquid soap container 109 mm wide, 125mm high and 12mm dustance from wall of standard shape with bracket of the same materials with snap fitting approved quality and colour, weighing not less than 105 gms.

Providing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply complete as per direction of Engineer in Charge. internal wrok-Exposed on wall a) 20 mm nominal outer dia Pipes

Providing C.P. brass bib cock of approved quality conforming to IS:8931 a)15 mm nominal bore

Providing PTMT soap dish holder having length of 138 mm breadth 102 mm, height of 75 mm with concealed fitting arrangement, weighing not less than 106 gms

Providing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. A) 10 litre capacity - White

Providing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge

Providing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively

Providing P.V.C waste pipe for sink or wash including P.V.C waste fittings complete. Flexible pipe a) 32 mm dia

Providing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing PTMT bib cock of approved quality and colour. A) 15mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing PTMT pillar cock of approved quality and colour a) 15 mm nominal bore, 107 mm long, weighing not less than 110 gms

Providing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms a)15 mm nominal bore

Providing uplasticised PVC connection pipe with brass unions. a)30 cm length-20 mm nominal bore

Providing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. A) 15 mm nominal bore, 105 mm long, weighing not less than 138 gms

Providing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. A) 20 mm nominal bore, 120 mm long, weighing not less than 198 gms

Providing C.P.V.C Male Thread adopter brass as per direction of Engineer-in-charge. a) 3/4'' x 3/4"

Providing C.P.V.C Male Thread adopter brass as per direction of Engineer-in-charge. a) 3/4'' x 1/2"

Providing C.P.V.C Female Thread adopter brass as per direction of Engineer-in-charge. a) 3/4'' x 1/2"

Providing C.P.V.C Female Thread adopter brass as per direction of Engineer-in-charge. a) 3/4'' x 3/4"

Providing plain elbow C.P.V.C as per direction of Engineer-in-charge. a) 20 mm

Providing C.P.V.C tee as per direction of Engineer-in-charge. a) 20 mm

Providing C.P.V.C socket as per direction of Engineer-in-charge. a) 20 mm

Providing C.P.V.C union as per direction of Engineer-in-charge. a) 20 mm

Providing health faucet as per direction of Engineer-in-charge.

Providing phase as per direction of Engineer-in-charge.

Provining white plastic seat solid with lid CP brass hinges & rubber buffers as per direction of engineer-in-charge.

Providing CP jalli as per direction of Engineer-in-charge. a) 100 mm

Providing CPVC Adhesive solution 118 ml as per direction of Engineer-in-charge of brand Astral or equivalent.

Providing telfon tape(12mm X 8mm) as Engineer-in-charge.

Providing M seal fast curing epoxy compound complete as per direction of Engineer-in-charge.

Providing Tank cover for 500liter water tank as per direction of Engineer-in-charge of size for 500 lit water tank.

Providing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a)15 mm nominal bore

Providing C.P. brass pillar cock of approved quality and colour a) 15 mm nominal bore

Providing C.P. brass 2-in-1 bib cock complete as per direction of Engineer-in-charge.

Providing C.I. bracket for wash basin and sinks complete as per direction of Engineer-in-charge.

Providing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. A) Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms

Providing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : a) 250x10mm

Providing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : a) 150x10mm

Providing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete a) 100 mm

Providing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. a) Twin rubber stopper

Providing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete

M/S Bharat Nagpal

M/S Surinder kumar banga

S V ENTERPRISES

Shiwangi construction

Ankit Kumar

DESH RAJ BAIRWA

Goyal Construction Company

ASHISH CONSTRUCTION