CA NO. GE(P)AF/GUR-14/2022-23 SPECIAL REPAIR TO FRP SHEET OF BLDG NO 132 AT AF STATION PALAM AND PROVN OF PARKING SHED, RAMP AND HARDSTANDING AT AF STN GURGAON UNDER GE( P) AF GURGAON.

Amount

Taking down Plain/Corrugated steel/PVC sheeting from roof of any description from up to 4 Storey building including removing from site complete all as directed.

M&L for complete removal of existing treatment and applying two coats synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of Old steel/iron surfaces exc 10cm in width or girth up to 4 storey building all as specified and as directed by Engineer-in-charge.

S&F for 6 mm thick Twin wall Thermoclear poly carbonate sheet (conforming to IS: 14443) of any colour as in roof covering/cladding to wall fixed with coach screws and washers over Aluminium cover Strip 40x3mm and rubber washer in each joint complete up to 4 Storey Building all as specified and as directed by Engr-in-Charge. Make: Everest or equivalent make as approved in any command / E-in-C.

taking down cement plaster from brick or concrete surface including raking out joints of old brick work and scrubbing down with water complete all as specified and as directed.

M&L for 15 mm thick cement plastering by using manufacture sand in CM 1:4 on brick/concrete surfaces of roof and parapet, mixed with water proofing compound, finished even and smooth without using extra cement (Including 4 Story building) complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately.

Supply only liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.

S&F PVC coated Fabric, water proofing flexible Awnings for windows, sheds, doors, roof as per directed with Approved quality of material, inclunding fixing accesary with factory fabrication and fixing material . multi colour or plane colour awnings as per sample approved and all as specified as dierected by Engr in charge.

M&L for applying two coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning including preparation of new plastered surface complete all as specified and as directed by Engineer-in-charge. Make-Asian (Apex Ultima) paints/Berger (Whether coat long life) or equivalent make mentioned in list of make including necessary scaffolding upto 4th floor complete all as specified and as directed by Engineer-in-Charge.

M& L Structural steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of grade Fe-290 (Grade E-165) complete all as specified and as directed by Engineer-in-Charge.

Surface dressing in soft/loose soil n exc 15 cm deep all as specified and directed by Engr-in-Charge

Excavation in post holes each 0.50 cum getting out , returning filling in layers not exceeding 25cm including watering and ramming and removing surplus earth to a distance not exceeding 50 metre as in soft/loose soil complete all as specified.

M&L Plain cement concrete (1:2:4), type B-1 for Foundations, including rafts, footings, foundation beams;plinth beams; bases forcolumns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.

M&L Providing and fixing for Tensile Roofing as per design with welding using SAW/MIG/MMAW processes CNC cutting splicing machinery grinding of member joints fabrication & erection (MS suire/cerculer pipe Column 5Nos 165x3.5mm) heiht 3.10 mtr above GL , Outer frame MS pipe length 16 Mtr x76x3mm thick, Arch pipe truss section pipe 60x2.5mm thick, base plate 350x350x12mm thick, MS purling pipe 50x2.5mm thick and S.S fittings 304 grade, Aluminiu flat bar 12"mm wideand 3mm thick and applying zinc primer with Deco spray paint,Roof sheet 725 g/Sq. Fabric (FabricTensile breaking strength wrap 3000N//5cm, Tensile breaking strength Weft 3000N/5cm, Tear strength Warap 300N, Tear strength Weft 300N Adhesion 120N/5cm, Temparature restance -30oC/+70oC Make:- Sioen/Ferrari/ Global tensile structure complete all as specified and directed by Engr-in-Charge.

S & F structural steel work Fe-410-W(Gde-E-250) quality-B as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Supply & Fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end tobe filted with washers and one hexagonal or square nut , exc 22.5mm and n exc 1.00mtr long dia of shank 16 to 20mm complete all as specified and directed.

S & F MS TMT steel bars 10mm dia and over cut to length bent to shape reqd. incluing cranking, bending and binding with ms wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

S & F MS TMTsteel bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length bent to shape reqd. incluing cranking, bending and binding with ms wire (annealed) not less than 0.9mm dia or securing with clips complete all as spcefied

Excavation in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/Loose Soil, complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 250 mm in soft/loose soil, complete all as specified and as directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for machine cut broken stone or boulders of gauge not exc 63mm as in hard core n exc 150mm thick spread and levelled including watering & ramming all as directed by Engr-in-Charge.

M&L for 100mm thick plain cement concrete type D-2 1:4 :8 using 40mm graded crushed stone aggregate as in sub base finished with broom finished without using extra cement, laid in alternate bay all as directed by Engr-in-charge.

M&L for 75mm thick plain cement concrete type B2 1:2:4 ushing 40 mm graded stone aggregate) laid in alternate panel for floor, path and harstanding all as specified and directed by Engr-in-Charge.

M&L for 25mm thick plain cement concrete type B-1, 1:2:4 (20mm graded aggregate) Wearproof topping using metallic floor hardener as per manfacutre's instruction, as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings and path, and finished even and smooth (except metallic hardner) all as specified and directed by Engr-in-Charge. (Note metallic hardender glass strips area measured and paid separately).

Supply only hardner in liquid for mix in cement concerte as per manufacturer's reccommandations complete all as specified and as directed by Engr-in-charge. Makes: DR. FIXIT PIDE PROOF L W, CICO, FOSROC.

Supply only 22 mm wide and 3 mm thick plastic dividing strips as laid in floor all as specified.

M&L 60 mm Machine pressed pre casted pressed cement concrete inter locking paver blocks glazed coloured up to 6mm on the top in any shape and size, strenth not less than M-35 complete all as specified

Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregates in roof kerbs of mud stops, rounded or chamfered on edges of tiled path complete all as specified and as directed by Engr-in-charge

Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engr-in-charge

Scarifying or picking gravelled , macadam or bituminus macadam surfaces n. exc 50 mm deep and in area exc 400 sqm complete all as specified and directed.

Hardcore of broken stone or boulder of gauge 63mm but n.exc 100 mm deposited , spread and levelled in layers n.exc 15cm thick , water and rolled /rammed to a true surface complete all as specified and directed.

150 mm thick plain cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in hard standing etc including spike rolling to surfaces complete all as specified and directed

M/L Mild steel work of FE-410-W (grade -250) quality B as in framing for cladding, glazing , in cattele trap etc and like fixed with cleats and connecting plates with welding /rivetting /bolting complete all as specified and directed

M/L Preparation of new steel surfaces and applying two coats of synthetic enalel paint over one coat of red oxide primer complete all specified and as directed .

Forming 12mm thick expansion joints of 150mm thick slab filled with Pre- formed bituminous filler and top 30mm primed and sealed with sealing compound Grade "A' complete all specified and as directed .

Forming contraction Joints (Dummy)65 mmm deepx10mm wide filled with sealing compound Grade "B' complete all specified and as directed .

M&L brick work with subclass 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 all specified and as directed .

M&L 20mm thick granite (of any type) tiles machine cut in skirtings, dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick screed bed of CM 1:4.complete all specified and as directed .

M&L 10mm thick cement plaster on fair face of brick/concerete surface in CM 1:4 complete all specified and as directed .

Note:- The amount of Rs 45000.00/- against Schedule of Credit on Page No 133 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

M/S Parshant Associates