CERTAIN REPAIR TO B/R WORKS OF HQ 15 CORPS, HQ 31 SUB AREA AND OTHER AOR OF AGE B/R-I AT BB CANTT SRINAGAR

Amount

Dismantling of plain or corrugated steel sheeting, any gauge thickness, including nanital or similar pattern roof covering complete all as specified and directed.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with coatch screws and washers in roofs, with zinc coating 120 grms/sqm complete all as specified and directed.

S&F 0.80mm thick galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings, fixed with coatch screws and washers with zinc coating 120 grms/sqm complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lamp fixed with 'L' or 'J' type hook or cranked bolt and washer in roof, wall cladding etc complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/ blankets any thickness, including cover fillets complete all as specified.

S&F solid PVC Wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications complete all as specified and directed.

S&F 12-15mm thick 1st class soft wood Australlian wooden panelling fixed with toughened and grouted as wall panelling including fillets/cornices & 9mm thick plywood BWR fixing on walls and two coat of varnishing, polishing and preparation with sneezing complete all as specified and directed. Note: Rates for disconnecting of electrical connections from main DB and removing all switch socket, sheet metal enclosures and fittings & fixtures and refixing the same and makig electrical connections as directed after completion of work deemed to be included in quoted rates.

S&F wooden laminated flooring in strips 1200mmx200mmx8 to 10mm thick having fire rating class B-1 fixed over PVC sheet and cushion over 12mm thick plywood grade BWR type BB-5 Nos of Ply fixed with nails to timber including beading/cornices and tee all as per manufacturer's instructions and fixed complete all as specified and directed. (Make- Action Tesa, Pergo)

S&F Khatamband pattern false ceiling, design as approved with ornamental wood work made out of 1st class soft wood (deodar) including necessary repair/replacement of hard wood frame work & hangers/fillets /cornices and 12mm thick BWR plywood and finally finished with french polish (two or more coats) complete all as specified and directed.

S&F aluminiun anodised snap grid ceiling of frame size 600x600mm, main Tee section of size 36.5mmx25mm x1.4 mm thick , cross Tee section of size 23.5mm x26.4 mm x1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 6mm dia GI suspenders including Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions

S&F 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling complete all as specified & directed.

S&F 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed in ceilling with screws to timber frame work as specified and directed.

M&L for second class soft wood in scantlings wrought fixed in frame work complete all as specified.

S&F wooden fillets of 2nd class softwood, wrought, rectangular in section of sectional area exc 13 Sqcm and n.exc 25 sqcm fixed with nails complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer omplete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walling etc, including raking out joints, haking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n.exe 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub base or levelling course etc complete all as specified and directed.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:6 complete all specified and directed.

M&L for coloured glazed ceramic tiles on vertical surface as in dado, skirting etc of size 350x250x7mm/ 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile fixed over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:6 complete all specified and directed.

M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36sqm on vertical surface as in dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile fixed over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any motar complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window cills, cooking platforms and like including rounding edges, laid over and including 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.

M&L for 100mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in sub base or levelling course etc complete all as specified and directed.

M & L for Chequered cement concrete tiles of size 30cmx30cmx22-25mm thick, with grey cement and pigments set, jointed in neat cement slurry in floors laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sqm each and removing from site complete all as specified and directed.

Taking down chokats or frame with shutters (without taking off shutters from frame) exc 1.5sqm and n.exc 4.0sqm each and removing from site complete all as specified and directed.

S&F anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame, glazed with 5.5mm thick tinted glass including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size, where required double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing brass pivot, mortice lock vertical type of mild steel 4 levers of size 100mm etc as mentioned here in below complete all as specified and as directed.

S&F frameless toughened glass partation/ window/ door with sliding shutters (02 Nos) or side hinghed type shutter 12mm thick, factory toughened plain/ design sheet glass, using the stainless steel fitting of polished chrome finish, in each shutter (stainless steel finish for handles) including cutting necessary holes and cutouts complete all as specified and as directed. (a) Lock patches with EPC nad strike plate XL-C-4011A:01 No (for openable shutter) (b) Floor spring 90mm opening (EN4) 01 No (for openable shutter) (c ) Top patches XL-C 4012: 01 No (for openable shutter) (d) Bottom patches XL-C 4013: 01 No (for openable shutter) (e) Top pivots XL-C 4014: 01 No (for openable shutter) (f) 450mm long H-Type handles 25mm dia of grade SS-304, XL-C-3003A: 01 No (01 Set for openable shutter)

S&F UPVC Window, (unplastisized poly-Vinly Chloride) sliding window/ fixed or openable type multi-chambered and stiffened framed windows using 88mmx52mm size section all-round as main frams and shutters made with profile section of size 57mmx42mm,including the cost and fixing of 5mm thick clear flot glass in shutters and stainless steel wire mesh shutters shall have well defined welded corner joints without any gaps, fixed the window unit to the existing masonry with anchor fasteners as required. The shutters shall have necessary handles and other associated fittings to the faciliated smooth operation. Both the frames and shutters shall be reinforced with GI proflies of thickness 1.25mm the entire window is covered with MS powdercoated tube of size 40mm*20mm all-round the frame the frame section, 10mm square bars horizontally placed at 120mm C/C and suitably placed vertically to avoid buckling and providing structural strength, Minium weight shall be 10kg/Sqm and fixed to UPVC frames with suitable fasteners. The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials complete all as specified and directed. Make; Rajshri Plastiwood/ Sintex /Duroplast Extrusion Pvt. Ltd

S&F Aluminium powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831), bottom of size 92 x 31.75 x 1.50mm (section No 20832) and shutter top & bottom of size 40 x 18 x 1.55mm (section No 20736) and side (handle) of size 40 x 18 x 1.55mm (section No 20738) and lock side shutter frame of size 40 x 18 x 1.45mm (sectio No 20737) and for wire guage shutter of size 18 x 43.50 x 1.35mm (Section No.20791) with locking arrangement including stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and providing 5.5mm thick tinted glass with necessary rubber beading gasket and aluminium (anodised) grill, square, ractangular or similar section, fixed with channel of size 38 x 12 x 13mm etc including making good to the disturbed surfaces all as specified and as directed.

S&F aluminium (powder coated with approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position and aluminium (anodised) grill, square, ractangular or similar section, fixed with channel of size 38 x 12 x 13mm etc complete all as specified and directed

S&F 15mm bore steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F Compound girders & stanchions, lattice griders, aerial masts, staging for water tanks & the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates etc. of Gde Fe 410-W (Gde- E-250) Qty-Bcomplete all as specified and directed.

S&F 1000 litres capacity rotational moulded polye-thylene water storage tanks three layers (cylindrical vertical with closed top) hoisted and fixed in position including ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm dia including taking down old unserviceable water tanks complete all as specified and directed.

S&F 500 litres capacity rotational moulded polye-thylene water storage tanks three layers (cylindrical vertical with closed top) hoisted and fixed in position including ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15mm dia including taking down old unserviceable water tanks complete all as specified and directed.

M/S Himalayan Construction and Co. (BID ID -3163374)

D N ENTERPRISES (BID ID -3163275)

M/S Vivek Gupta and Co (BID ID -3163101)

M/S NORTHERN ELECTRICAL WORKS (BID ID -3169068)