Illumination or proper lighting arrangement in the G.M. office main gate to Dindayal Upadhyaya Rehabilitation centre using LED light sets and underground FR PVC cable against G.M. unit of Dhori Area.

Amount

Dismantling of pole/street light standard/strut embedded in cement concrete foundation etc. as required.

Transporting of pole.

Erection of steel pole tubular or rail pole strut concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and re-filling and secured with holding clamps, bolts, nuts, etc. as required.

Providing and making steel pole collar with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified size and shape including form work, plastering if specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/pipe not to be deducted) 2’ x 1.5’ x 1.5’ x 8 = 36 cft. X 0.0283

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works (+) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) 14 nos. poles x 5.5 sqm

Painting with aluminium paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 200 Amp TP&N.

Supply & providing of bend pipe for fixing of LED light set.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size in phenolic laminated sheet cover in front including painting etc required. : 250 mm x 300 mm x 100 mm deep.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2x10 sq.mm + 1x10 sq.mm earth wire.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 x 40 sqmm + 1 x 4 sqmm earth wire.

LED light (to be supplied departmentally).

Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. 1.5’ x 1.5’ x 975’ = 2194 cft. X 0.0283

Supplying and fixing of 32mm dia x 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent/HPMV/HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos. 40mm x 3mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Labour cost for LED fitting top on pole.

Supplying and fixing of following sizes of medium class PVC conduit, along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. : 32 mm

Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 metres.

Total impact of GST for the purpose of CTC

M/S UPENDRA ELECTRICAL

M/S KUMAR ENTERPRISES