REPAIR TO DRAIN COMPOUND WALL GATE PATH FENCING ETC AT HAFT CHINAR UNDER GE 970 EWS

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and precast concrete articles, complete all as specified & directed by Engr-in-Charge.

Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below or above Ground level) complete all as specified & directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Removing surplus spoil to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified & directed by Engr-in-Charge.

All as per srl item No 6 above but except bricks complete all as specified & directed by Engr-in-Charge.

M&L for walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 etc, complete all as specified & directed by Engr-in-Charge.

All as per srl item No 8 here-in-before but except stone complete all as specified & directed by Engr-in-Charge.

M&L for rendering 15mm thick in Cement plaster 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge.

Preparing new surfaces of walls & applying two coats of cement base paint over a coat of primer complete all as specified & directed by Engr-in-Charge.

M&L for raking out joints/ pointing to to squared rubble masonry, coursed or uncoursed all as specified and directed.

M&L for keyed pointing of cement mortar 1:4 stone masonary to random or polygonal rubble, uncoursed or brought upto course all as specified and directed.

M&L for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm Extra over stone walling (lime and sand stone wall) for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses all as specified and directed.

Material & labour for 100mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate), as in leveling concrete in floor finished even & rough to receive top floor layer/finish complete all as specified & directed.

S&F machine pressed precast chemical coated skid resistant chequred tiles made with white cement and color pigment, 300x300mm and 20-25 mm thickness M35 grade incl screed bed 20mm in CM (1:6) complete all as specified & directed by Engr-in-Charge.

Material & labour for sand filling under floors, paver blocks, including watering and consolidation complete all as specified and directed.

S&F Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, incl sand cushioning 25 mm thick below paver complete all as specified & directed by Engr-in-Charge.

Material & labour for cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in mass concrete in foundation concrete, side and making fair round/chamfering the edge etc complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40mm graded crushed stone aggregates as in foundation filling and mass concrete in foundation concrete of fencing posts complete all as specified & directed by Engr-in-Charge.

Material & labour for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in copings, benching, haunching, water troughs, and the like including weathering, slightly rounded or chamfered angles & throating, including necessary form work as required all as specified and directed.

Material & labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in surface channels and drains complete all as specified.

M/S ALI MOHAMMAD GASSI

M/S N A Enterprises

M/S LATIF AHMAD BABA CONSTRUCTION

M/S V L ENTERPRISES

M/S RAFIQ AHMAD SOFI AND SONS

M/S BASHIR AND SONS