SPECIAL REPAIRS TO RAFTERS, PURLIN, BEAMS, ROOF AND OTHER STRUCTURAL MEMBERS OF BUILDING NO T-33 OF SIG COY, PROVN OF REAR SIDE ENTRY GATE OF BLDG NO P-4 (NCC OFFICER MESS), WAITING SHED FOR CANDIDATES AT ARO, MUMBAI AND ADDN / ALTN TO KITCHEN AND BA

Amount

Dismantling mangalore patteren or similar tiles in roofing including portions bedded in cement mortar all as specified and directed.

Dismantling roof battens of any description and in any position all as specified and directed.

Dismantling timber in scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq.cm in any position all as specified & directed

S&F in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any height all as specified and directed.

Fixing only in repairs in patches including cutting out old, piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any height all as specified and directed.

M&L in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc second class hardwood wheather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps in any situation including scafoldings of any height all as specified and directed.

Fixing only in repairs in patches including cutting out old, piecing, heading joints etc second class hardwood wheather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps in any situation including scafoldings of any height all as specified and directed.

M&L in repairs to replace old decayed timber (including piecing, scarifying, etc of old and new timber if required) second class hard wood clean sawn in scantlings timber framed and fixed in any position and description including scafoldings of any height all as specified and directed.

M&L pre-painted roof tiles of metal sheet of design profile hot-dip aluminium-zinc alloy metallic coated profile steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick of a colour having yield strength of 550 Mpa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any height all as specified and directed.

S&F hot rolled medium and high tensile structural steel of grade E 250 quality A conforming to IS 2062: 2011 as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) all as specified and as directed.

S&F of structural steel work in tubular/square tube trusses including special shaped washer, gusset/bearing plate using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 all as specified and directed.

M&L in repairs Brickwork with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site outside MD land all as specified & directed.

M&L Granite (of any type and colour) 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in floors/Jambs/WHB conters and all other similar works in approved design over 20 mm thick screed bed in cement mortar 1:4 all as specified and directed.

M&L for machine cut, polished cudappah stone work 20 to 25 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and rounding the edges as in kitchen platform, flooring and all other similar works, including laid over 15mm thick cement mortar (1:6) all as specified and as directed.

M&L for HD Polished digital coloured ceramic tiles 9 mm thick (Square/rectangular) area of each tile exc 0.36 sqm but not exceeding 0.72 sqm in floors etc. set and jointed in neat cement slurry laid over 15 mm thick screed bed in cement mortar 1:6 all as specified & directed. Make -Kajaria(Grestough series ), Johanson, AGL

M&L HD Polished digital coloured ceramic tiles 9 mm thick (Square/ rectangular) area of each tile exc 0.36 sqm but not exc 0.72 sqm in dado, skriting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles laid over 10 mm thick CM 1:4 (backing coat) all as specified & directed. Make -Kajaria(Grestough series ), Johanson, AGL

M&L Anti Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11sqm in floors etc. set and jointed in neat cement slurry laid over 15 mm thick screed bed in cement mortar 1:6 all as specified & directed. Make -Kajaria, Johanson, AGL

M&L for Glazed coloured rectified digital polished ceramic tiles 600x300x8 mm thick in vertical surfaces (including designed borders) such as skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match the shades of the tiles laid over rendering 10 mm thick in CM 1:4 all as specified & directed.

Dismantling of ceiling board /Wall (Plup insulation or insulation etc) or insulation board any thickness including cover fillet and grid frame work all as specified & directed.

M&L for GI powder coated frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre all as specified and directed.

M&L for 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids all as specified & directed. Note:- Frame work for ceiling shall be measured and paid separately.)

M&L for providing and fixing 10 mm thick plaster of paris designer ceilng (Gypsum anhydrous) to flat surface with GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre with & including Hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long for any sunk or raised moulding all as specified & directed.

M&L in repairs for 8/10 mm thick PVC ceiling or wall panelling (any colour) with aluminium frame work for receiving ceiling board / wall panelling including all necessary accessories for fixing at various levels all as specified and directed.

M&L in repairs for 25 mm size 155 mmx2900 mm high grade WPC smooth, wood grain or any colour texture thick WPC decorative louvers with aluminium frame work for receiving ceiling board / wall panelling including all necessary accessories for fixing at various levels all as specified and directed.

Carefully chipping, removing existing, taking down and applying internal plaster upto 12 to 15 mm thick by low impact high frequency hammer/chipper without damaging the original sound brick work or concrete including removal of POP/ Gypsum plaster if any on walls of any thickness, racking of joints, daily cleaning and stacking of debris at prescribed location in polypropylene/ paper bags, disposing off the debris so generated on weekly basis out side the premises all as specified & directed.

M&L for providing and applying including taking down average 25mm thick plaster in two coats with ready mix prepacked proportioned dry mix mortar, blended with PP fibers, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces additives, on external surfaces including transporting of material, mixing, curing all as specified & directed. Note :- (i) Liquid water proofing compound will be measured and paid seperately as supply only (ii) Height of Bldg up to fourth floor. MAKE: M/s ACC Accoplast/ M/s Ultratech Readiplast/ M/s Magicrete Magicplast/ CK Birla's AEROCEN

Supply only liquid integral waterproofing compound

M&L for preparation of newly plastered brick/concrete surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 2 mm thick wall care putty all as specified and directed.

M&L for providing & applying anti algal water-based Elastomeric exterior wall finish on old as well as newly plastered surfaces including surface preparation, applying suitable wall Prime seal primer 8-10 Sqm per ltr coverage area and application of two coats (base coat 4.2 -4.7 & top coat 6-6.5 sqm per Litre coverage area ) & of paint by roller all as specified and directed. Make- Dr Fixit Rain coat classic, Asian paints, Berger.

M&L for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified & directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc primer all as specified & directed.

M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

S&F in repairs double action floor spring hydralically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified & directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.50 but n exc. 4.00 Sqm each all as specified and directed.

Taking down Chowkhats or frames area exc 1.50 but n exc. 4.00 Sqm each all as specified and directed.

Taking down shutter of any description area exc 2 Sqm each & refixing in the same opening all as specified & directed

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) area n exc 1.50 Sqm each all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F framed work such as grills, gratings, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified & directed

S&F wooden/ coloured powder coated sections for doors, windows, ventilators, door partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame all as specified & directed. Note : (i) Glass panes & wire mesh will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clips, hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement and filling of gap between frame and wall shall be filled with silicon shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

M&L for 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square area exc 0.5 sqm in each pane frosted on one side all as specified & directed

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square area n. exc. 0.5sqm in each pane all as specified and directed.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or Aluminium beadding all as specified and directed.

S&F 18 to 19 mm thick HDHMR board, prelaminated one side with decorative choice lamination exterior grade, fixed with screws to frame work as in cup board & kitchen cabinet shutters and all other similar works all as specified and directed. Make: Action Tesla/ Green Ply/ Century Ply

S&F of stainless steel 75 mm L shape butt hinges all as specified and directed by Engg-in-charge. Make : Classic

S&F SS 304 grade 200mm length stainless steel cabinet drawers handles all as specified and directed. Make:- Godrej Kitchen fittings and Sleek by Asian Paints

S&F 12mm thick, toughened glass for door shutters, partitions in bathroom or other places, shelves, table top, including pivot top and bottom and in similar work with and including fitting and fixtures such as glass handles 600 mm long stainless steel studs, fittings for door pivots all as specified and directed .

Supply and fixing Sun control film, 50 micron non reflective type, sticked to glass as per manufacturers instructions all as specified and directed.

S&F in repairs aluminium (extruded section) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg all as specified and directed.

M&L for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 150 mm all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled stainless steel all as specified & directed.

S&F aluminium anodised 100 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium anodised 200 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium handle 150 mm cast type anodised fixed all as specified & directed

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat comprising of 62 mm x 32 mm size and applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum all as specified & directed

S&F factory made 28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size, modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/ borer proof all as specified & directed

S&F wash basins, vitreous china, white, flat back, of size 550mm x 400mm x 140mm or nearest size conforming to model 'CALBURT' Cat No. S2020137 of CERA or of equivalent model in other makes as listed in Appendix 'C, with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and table top basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings with silicone sealant all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous China Urinal, half stall type white including Urinal spreader of CP, PVC waste fittings 32mm size including urinal spreader, self closing push cock ,PVC connection of 15mm size with PTMT nuts of length 450mm long including bracket all as specified and directed by Engineer-in-Charge. Make: Jaquar/PARRYWARE/CERA

S&F in repairs fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed. Make :- Cat No QQT-7053 of Jaquar or equivalent of Ess Ess/Kohler/Marc.

S&F in repairs 15mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe all as specified & directed. Make:- Cat No QQT-7037 of Jaquar, Kohler/ Marc

S&F in repairs tubular towel rail brass chromium plated, 20mm dia, 60cm long between flanges all as specified and directed. . Make : Jaquar, Marc, Kohler, Cera

S&F in repairs grating square 150mm size of PTMT(minimum 100 gms) all as specified and directed. .

S&F in repairs 15mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe all as specified & directed. Make Cat No QQT-7037 of Jaquar, Kohler/ Marc

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 510mm x 510mm, bowl size 460mm x 460 x 230mm all as specified and directed. Make Nirali, Prayag/Eagle.

M&L for fancy type 15 mm bore central hole basin mixture table mounted with 235 mm 9 inch long swivel spout and 450 mm long braided connection pipes all as specified and directed. Make : Cera Cat Part No F10177551 or Equivalent of Kajiara kerovit/Jaquar.

S&F in repairs toilet paper holder, brass chromium plated all as specified and directed. Make Cat No CAN-1153N of Jaquar, Ess Ess/ Marc/ Kohler

S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws all as specified and directed. Make Cat No AQN-7731 of Jaquar, Kohler/Marc.

S&F two piece EWC water closet Single Piece EWC 655x345x750 mm including Cistern, PP Soft close seat cover and hinge, fitting accesorries, Accesories set and cistern fittings, fixed with waste coupling and waste pipe all as specified and directed. Make : Cat Part No S1013205 having S Trap of Jaquar or Equivalent in Cera / Parryware / Prayag

Demolition and breaking up drain pipes upto 100/110 mm dia (Salt glazed stone ware, AC, PVC or reinforced concrete) set in cement mortar all as specified and directed

Demolition and breaking up drain pipes upto 75 mm dia (Salt glazed stone ware, AC, PVC or reinforced concrete) set in cement mortar all as specified and directed

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls all as specified and directed.

S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls all as specified and directed.

S&F 75mm dia PVC (SWR) bends with access doors of any radius all as specified and directed.

S&F 110 mm dia PVC (SWR) bends with access doors of any radius all as specified and directed.

S&F 75 mm dia PVC (SWR) junction single, (single T) equal or uequal provided with access door all as specified and directed.

S&F 110 mm dia PVC (SWR) junction single, (single T) equal or uequal provided with access door all as specified and directed.

S&F 75 mm dia PVC (SWR) vent cowl all as specified and directed.

S&F in repairs steel water tubing galvanised iron medium grade 20 mm bore (ISI Marked) with all fittings fixed complete to walls and ceilings or laid in floor/wall/ceiling in high rise building including taking down & scafolding all as specified and directed. Make :- Tata, Swastik, Jindal, Prakash, Surya

S&F in repairs steel water tubing galvanised iron medium grade 15 mm bore (ISI Marked) with all fittings fixed complete to walls and ceilings or laid in floor/wall/ceiling in high rise building including taking down & scafolding all as specified and directed. Make :- Tata, Swastik, Jindal, Prakash, Surya

Cutting chases, pinning in and making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting not exc. 10cm girth all as specified and directed.

S&F in repairs 500 Litres capacity rotational moulded PVC tank 3 layer in position at any location on top of the building including removing existing tank, disconnecting all incoming and out going connections, provision of new fittings including float valve suitable up to 50mm bore GI pipe all as per existing requirements all as specified and directed. Make :Sintex ,polycon , Plasto

S&F in repairs 20 mm gun metal gate valve, with iron wheel head, screwed both ends for GI pipe with union, (ISI Marked) fixed in existing line and in position all as specified and directed.

S&F in repairs PVC connection pipe 15mm size 600 mm long all as directed & specified .

S&F in repairs stainless Steel drapery road (1 mm thick stainless steel section of outer dia 25 mm with bracket, ring & fancy side holders all as directed by Engr-in-Charge

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm all as specified & directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth and nexc 10 sq m on plan and getting out in hard and dense soil all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 including all quoins, arches, Pillars etc. but excluding ashlar facings built in cement mortar all as specified & as directed.

M&L rendering 15mm thick in cement mortar 1:4 using intergral water proofing compound on fair faces of brick work to be finished even and smooth (with out using extra cement) all as specified and directed. Note: Integral liquid water proofing compound to be used in per bag of cement shall be as per manufacturers instructions and paid separately under respective items.

Supply only integral water proofing compound Make : Dr fixit/Fosroc

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed. Note The item includes brackets, clamps and other similar small items

S&F 4 mm thick panel of any type, pattern and shape design Aluminium Composite Panel (ACP) /CNC laser cutting, aluminium thickness of 0.5mm, Front side finish of aluminum roll coated with Plain / coloured / wooden texture PE / PVDF, Core material of Non-toxic polyethylene, Macromolecular lamination film, Rear side of Aluminum coated with primer and including frame work using of fasteners, including concealed screws, nuts, bolts and other items required for connecting aluminium to aluminium / steel / wooden / ply board, Blind rivets all fixing anchors, brackets and similar attachments used in the erections, shall be of aluminium, non-magnetic stainless steel, zinc coated steel, for fixing in both internal / external wall cladding complete weather proofing sealant of a polyurethane elastic joint / structural silicone sealant / pre-formed gaskets to the Horizontal & Vertical Joints in the Aluminium cladding / facade as per manufacturer's instructions all as specified and directed. Note : 1. The unit rate quoted is deemed to be inclusive of all necessary fixing acceserries mentioned in the description of work and scaffolding works at any height for installation. 2. For payment purpose panels areas will be measured on one side only. 3. The unit rate quoted is deemed to be inclusive of electirc led warm white 4 watts strip rope celling light, decrorative led light with adopter conection to main electric supply from near to electric source all necessary fixing acceserries mentioned in the description of work and scaffolding works at any height for installation.

S&F fancy design SS grade 304 street LED bollard having minimum weight of 11.30 Kg, diameter of 100mm length of 1.00m at top and bottom diameter of 180mm using 100 mm polycarbonate glass milky white with 12 watts LED module light of philips/fulham driver having adequates number of connectors and one power supply kit as per manufacture requirement and provide bothside hook for fixing chain link necessary provision for fixing on road all as specified and as directed by Engr-in-Charge. Note- Item includes connection to main electric supply from near by electric sources.

M&L coloured, digital glossy/matt finish outdoor elevation ceramic tiles in vertical surface 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shades of the tiles including 10 mm thick rendering in CM 1:4 all as specified and directed by Engineer-in-Charge Make- Johnson/ Kajaria or equivalent)

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance nexc 50 m and making good surface all as specified and directed.

M&L PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in embedding of post all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soil all as specified and directed.

M&L broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface using power roller all a specified and directed by Engr-in-charge.

M&L PCC 1:4:8 type D2 (using 100mm graded crushed stone aggregate) and similar work all as specified and directed.

S&F machine pressed rubber moulded glossy finished coloured precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thick, M-35 grade with grey cement and pigment bedded and laid over with joint filled all as specified and directed

M&L sand filling under floors or in foundations including watering and consolidation all as specified & directed .

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling all as specified and directed.

M&L point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, concealed with accessories incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volts grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including cover plate & mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139 (pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . Make of cables : Havells/ polycab.

All as per Srl item No. 107 here in before but for bell point controlled by one bell push . Make of cables:- Havells/ polycab.

All as per Srl item No. 107 here in before but for Wall Fan/ Exhaust Fan controlled by one Switch. Make of cables: Havells/ polycab.

All as per Srl item No. 107 here in before but for Ceiling Fan controlled by one switch. Make of cables: Havells/ polycab.

All as per Srl item No. 107 here in before but for socket outlet point 5 Amp on same board. Make of cables: Havells/ polycab.

All as per Srl item No. 107 here in before but for socket outlet point 5 Amp on Independent board. Make of cables: Havells/ polycab.

All as per srl item No 107 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly all as specified and directed. Make of cables: Havells/ polycab.

S&F modular switch 1 way 10 A module 230/250 volt, AC supply, ISI marked, with white cover plate with frame all as specified and directed. Make : Legrand, Havells, Anchor, Roma

S&F modular switch 1 way 16 A module 230/250 volt , AC supply, ISI marked, with white cover plate with frame all as specified and directed. Make : Legrand, Havells, Anchor, Roma.

S&F modular sockets 6A, 2/3 pin combined 2 module 230/250 Volts, 50 Hz, AC supply, ISI marked, with cover plate all as specified and directed. Make : Legrand, Havells, Anchor Roma

S&F modular sockets 6A/16A, 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make: Legrand, Havells, Anchor Roma

S&F modular bell push 1 way 6 A module 230/250 volt, AC supply, ISI marked, with cover plate all as specified and directed. Make: Legrand, Havells, Anchor Roma

S&F call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.

S&F ceiling rose surface bakelite 65x50mm, 3 terminal all as specified and directed. Make : Cona , Plaza, Anchor .

M&L for taking down and refixing of ceiling fan (old fan) and connecting up including provision of cable from ceiling rose or connector and fan painting of ceiling fans complete, in situ with synthetic enamel paint by spray painting including filling cavities with filler, one coat after cleaning all dust etc. with taking down fan, sealing cable end, dismantling romoving and hanging fan with rod of required length and proper hook and blades and removing fan and blades to store all as specified and directed. Note: Connection should be made neatly using two core flexible cable. Spray paint should be used.

S&F in repairs 20 watt LED, 6500 K, 4 feet long fixed including on PVC square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing all as specified and directed. Make : Wipro Garnet 20 W LED Batten 6500K or equivant make of Philips/ Havells.

S&F LED light fitting 1x 10W, 220 volts mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete V, AC decorative box type, bright white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete pre wired fixed to wall with 2 nos PVC block of suitable size all spcifided and directed. Make : Wipro Garnet 20 W LED Batten 6500K or equivant make of Philips/ Havells.

S&F recesss mounted low glare luminaire 40 watt 2 X 2 with all accessories all as specified and directed. Make Wipro Backlid 6500K or equivalent make of Havells/ Philips/ Bajaj.

S&F surface mounted low glare luminaire 40 watt 2 X 2 with all accessories all as specified and directed. Make Wipro Backlid 6500K or equivalent make of Havells/ Philips/ Bajaj.

S&F in repairs Exhaust fan 230 volt, 250 mm sweep, plastic body with wooden frame including making all electric connection all as specified and as directed including cutting of hole on wall and makng good to disturbed surface of wall and outer wooden box for fan fix on wall all as specified and directed. Make Bajaj Maxima 250mm

S&F Moduler stepped type electronic fan regulator 120 watt flush type, two module all as specified and directed. Make : Havells Reo, Anchor Roma, Legrand.

S&F LED security Building light LED 35 Watt, pressure die cast aluminum housing, heat resistant glass, IP65/66 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light all as specified and directed. Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells . NOTE: Rate quoted should be inclusive of 3 core 1.5 sqmm cable.

S&F in repairs MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

S&F in repairs MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series all as specified and directed.

S&F in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's all as specified and directed.

Taking down carefully copper/aluminum submain wiring complete including all fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces all as specified and directed

M&L in repairs Sub main wiring with two run of 16 sq mm stranded copper conductor PVC unsheathed FRLSH wire along with 16 sq mm green colour wire as earth contuinity conductor connected to common earth dolly concealed including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires for from Panel / Main DB to house SPN DB all as specified & as directed. Make : Finecab / Havells / Finolex as approved by GE Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 16 sqmm cable and one run of 16 sqmm cable with PVC conduit shall be measured as one length.

M&L in repairs Sub main wiring with two run of single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continueous earth wire and connecting to existing main switch board / distribution board and testing on completion all as specified and directed. Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one length

M&L earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth not less than 2.25 metre deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers , galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm c/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing all as shown in Electrical Plate No 3 of SSR part -I.

HINDUSTAN BUILDERS

Unity Enterprises

Nilesh Construction

GANGAJAL

Bidder Name

HINDUSTAN BUILDERS

Nilesh Construction

Unity Enterprises

GANGAJAL

N F ENTERPRISES