TP1-10/2025-26 OF CE/TP-I/CNI

Amount

Earth work excavation for foundation including all labour charges including initial lead, lift, etc. complete.

Supplying and filling with good river sand for foundation including cost of sand, all labour, lead,lift, consolidation etc. complete.

PCC 1:3:6, with 20 to 40mm HBG m/c metal without form work including cost of all materials, cement, all labour, lead, lift, etc. complete.

Providing RCC 1:1.5:3 using 20 mm HBG metal with out form work including cost of all material, lead, lift, etc., complete but excluding cost of all respects

Providing RCC 1:1.5:3 using 12-20 mm HBG metal with form work including cost of all material, lead, lift, etc., complete but excluding cost of all respects - For Plinth

Providing RCC 1:1.5:3 using 12-20 mm HBG metal with form work including cost of all material, lead, lift, etc., complete but excluding cost of all respects - For Column

Providing RCC 1:1.5:3 using 12-20 mm HBG metal with form work including cost of all material, lead, lift, etc., complete but excluding cost of all respects - For Grade beam & Plinth Beam

Providing RCC 1:1.5:3 using 12-20 mm HBG metal with form work including cost of all material, lead, lift, etc., complete but excluding cost of all respects - For Beam concrete

Providing RCC 1:1.5:3 using 12-20 mm HBG metal with form work including cost of all material, lead, lift, etc., complete but excluding cost of all respects - For Lintel and sunshade

Providing RCC 1:1.5:3 using 12-20 mm HBG metal with form work including cost of all material, lead, lift, etc., complete but excluding cost of all respects - For Roof lsab 150mm thick

Providing PCC 1:2:4 using 20 mm HBG metal with out form work including cost of all material, lead, lift, etc., complete but excluding cost of all respects

PCC 1:2:4, with 20mm HBG m/c metal with form work above GL including cost of all materials, cement, all labour, lead, lift, etc. complete.

Providing MS/RTS reinforcement rod for RCC works including cutting, bending, tying and fixing in position as per drawing and specification including cost of all materials, all labour charges, lead, lift, etc. complete.

Supplying and spreading of well gravel for low lying area including cost of well gravel, labour for consolidation, lead, lift, etc. complete.

Brick work in CM 1:5 using II class bricks of size 9" x 4 3/8" x 2 3/4 " including cost of all material, lead, lift, labour, etc, complete.

Brick work in CM 1:6 using II class bricks of size 9" x 4 3/8" x 2 3/4 " including cost of all material, lead, lift, labour, etc, complete.

Plastering with CM 1:3-12mm thick for wall both interior and exterior faces including cost of all materials lead lift etc complete.

Plastering with cm 1:5 mix using 12mm thick for inside and outside walls, plinth protection including cost of all materials,labour,lead, lift etc complete

Colour washing two coats using white cement mixed with approved colouring pigments, including cost of all materials, labour, lead, lift, etc. complete.

Fabrication and Labour charges for fixing of GI angles of 75x75x6mm size vertically @ 75cm c/c to the required length for supporting the cable in the cable duct in correct position including labour, cutting etc., complete as per the drawing and std.specification.

Weathering course with one course of pressed tiles 200x200mm size approved make and quality in cement mortor (1.3) 20mm thick and mixed with crude oil 10% by weight of cement and pointing the tiles with same oiled mortar over a bed of brick jelly lime concrete (20mm size brick jelly) and mixed in proportation 12:32.5, 80mm thck, slope 1 in 60, including cost of all materials, labour with all leads and lifts, etc., complete

Supplying and fabrication and fixing in position of anodised aluminium natural colour matt finish sliding window of size 1.18*1.48 m in two track in all floors with following sizes. All the two shutters with slinding arrangements, the bottom section should have Gutter arrangements so as to drain the water entering and made with extruded aluminium section of outer frames as shown below with necessary accessories such as rubber beading , handle,fixing 4mm thick clear sheet glass including all required for fabrication etc. complete. Necessary dimantling making holes in RCC columns , beams, masonry wherever necessary with power drill to the extent required and made good to the original condition after fixing as directed by the dept.Engineer. The Al. surface is to be anodised with matt finish under electrically controlled condition in accordance with ISI 1868/1962 specification for an average anodic film thickness of not less than 15 microns. ( All materials should be got approved by the Executive Engineer) before fixing in position.

Supplying and fixing of RCC jolley best quality approved design including cost of all materials, labour with all leads lift, etc., complete

M&F in position of anodised aluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single leaf door 1.20 x 2.20 m

Paving the floor with acid resistant tiles (quality, colour and shade as directed by the engineer at site) of size 305 mm x 305mm x 6 mm in battery room over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with Acid proof tiles of size 150x150x6mm laid in C.M (1:2 ) 20mm thick and pointing with white cement using 0.40 Kg. Sq.m approved colour and quality as directed by the engineer at site including cost of all materials lead lift labour etc. complete.

Painting 2 coats using white cement over one coat of priming coat for ceiling in all floors and exposed faces of beams including cost of all materials and scaffolding etc. complete.

Painting 2 coats with Asian ACE or equivalent over one priming coat of cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning ,preparing the surface and curing etc.complete.

Painting new iron works with two coats synthetic enamel paint over one coat of primer including cost of all materials , lead,lift etc complete.

Wiring with 2x1.5sqmm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch box and 5A F.T. Switch in flush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light point / Fan point or Electronic Regulator.

Supplying and fixing box type 4'-40w single flouresent fitting complete with copper choke and condenser 1 no 4'-40w tube with t.w. round block on wall or ceiling with pvc unsheated leads from terminals to the fittings with tube

Supplying and fixing of 1400mm sweep ac ceiling fan wit regulator with 300mm down rod on the exisitng clamps of approved make and colour including cost of all materials lead, lift etc., complete.

Supplying and fixing of 450 mm sweep heavy duty AC Exhaust fan with MS/Fibre louvers shutters arrangements of approved ISI quality complete with necessary wall opening and making good of the wall

Supplying and fixing of water tight Bulk head fitting with guard and approved suitable make for incondescent lamp with guard and 100 w bulb.

Fabrication and supplying of 20mm dia foundation Bolt and nut of length 1.20m,threading for a length of 15 cm at top and hot dip galvanising of bolt including supply of 2 nos of GI nuts and washers and fixing in the position as directed by the engineer at site including assembling of template etc., cost of template, all material, labour, lead, lift etc., complete

Fabrication of Template and assembling in correct position for various equipment plinth and grouting the foundation bolts including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site

Supplying and spreading of Quarry dust filling including cost of all material, labour for spreading all labour ,lead, lift, etc. complete.

Supplying and spreading of 20 mm HBG metal (machine broken) including cost of all material, labour for spreading all labour, lead, lift, etc. complete.

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. 15 MM DIA PVC PIPE (with Labour )

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. 25 MM DIA PVC PIPE (with Labour)

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. 20 MM DIA PVC PIPE( With labour)

Supplying and fixing GM wheel valve of approved brand (leader) ISI quality including cost of all materials, labour etc.complete 25mm dia

Supplying and fixing GM wheel valve of approved brand (leader) ISI quality including cost of all materials, labour etc.complete 20mm dia

Supplying and tying chain link size 50mm Sq. 2.4 m ht PVC coated including cost of all materials, labour, lead, lift etc.complete.

Suplying, fabricating and fixing in position of MS angle fence post with 75x75x6mm MS angle with making necessary groovs in that to fix the fencing wire fencing including cost of all materials, all labour,lead, lift, etc. and cost of red-oxide primer and two coats of approved enamel paint etc., complete as directed by the engineer at site.

Fabrication, supplying and erection of M.S. grill for ornamental gate, windows as per standard specification approved by the engineer at site including cost of all materials, welding, painting with two coats of enamel paint over one coat of red oxide primer including cost of all materials, labour, lead, lift, etc. complete.

Drilling of borewell alluvial soil or sedimentary strata of clay and sand or sand stone, shale, pebbles, boulders etc., first by taking a pilot bore of 140mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using rotary rig fuel, drilling at the site. Site will be shown by theTNEB Engineers at site including construction of mud pit. Drilling 140/150mm dia pilot bore upto 60m depth ending below ground level. ( 60.00 )

Reaming from 140/150 mm dia pilot bore to 300 mm dia bore as directed by the TNEB Engineers at site Upto 60m Depth ending from ground level (60.00)

Supply and delivery of 150mm dia PVC Casing pipe as per ISI Standard Specifications and as directed by TNEB Engineers at Site. 150mm dia PVC Casing pipe Plain (CM)

Supply and delivery of 150mm dia PVC Casing pipe as per ISI Standard Specifications and as directed by TNEB Engineers at Site.150mm dia PVC Casing pipe Plain Slotted

Supply and delivery of 150mm dia PVC Casing pipe as per ISI Standard Specifications and as directed by TNEB Engineers at Site. 150mm dia PVC End Cap

Labour charges for inserting 150mm dia PVC (6kg/cm2) casing pipe assembly (with slotted and W/O. slotted) in the drilled bore holes including jointing the PVC pipe with the PVC Coupler with cement paste etc., complete and supply packing with annular space with pebbles of size and quality as approved by the TNEB Engineers.

Supply and Erection of 1.5 HP 15 Stage Single Phase texmo Taro Borewell Submersible Pump quality and approved make for dewatering, borewell supply, sump to over head water tank etc., with all accessories such as starter, main switch, teakwood board for fixing of main switch, starter, fuse carrier, indicator holder, switch, lamp, etc., earthing arrangements, internal wiring from switch to motor, transportation, concrete bed / steel brackets, labour charges etc., compete. 1.5 HP 15 Stage Single Phase

Supplying and fixing of PVC water tank of approved brand (sintex) 1000 litre capacity in terrace floor as directed by engineer including cost of sintex water tank, labour for fixing in position, construction of BM for alround of tank, filling with filling sand and plastered the top and side surface all leads,lifts etc complete

Supplying of Godrej Navtal lock With Night latch (Seven Lever) with three keys for locking office portion and Pump rooms as directed.

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

H.Venkateswaran (BID ID -1357383)