REPAIR / MAINT TO ALL TYPE OF STEEL FURNITURE AND CHARPOY GI PIPE UNDER AGE (I) FATEHGARH

Amount

A) Removal of following existing unserviceable components of various MES F/DB/FD/TP/MAP furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueing, providing hinges,denting, placing everypart in-tact , as applicable as per drgs. B) Work will be executed where the furniture exist in different User Units of AGE (I) Fatehgarh Cantt including BS Furniture Yard complete all as specified and directed

TABLE OFFICE OFFICER STEEL (FD-84/1003)

a) Legs, as per drg

b) Lock of drawer as per drg (Make-GODREJ/HETTICH/LINK/RINOX)

c) Repairs to Drawer/shutter by renewing of old u/s parts including tinkering/denting, welding, etc. all as shown, complete all as specified & directed.

d) Stiffeners as per drg

e) PVC Shoes std quality all as per drg

f) Welding the joints of legs / square tube as per drg

g) Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Make: Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/AGE(I) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

TABLE OFFICE CLERK STEEL (FD-84/381/1004)

a) Legs, as per drg

b) Lock of drawer as per drg (Make-GODREJ/HETTICH/LINK/RINOX)

c) Repairs to Drawer/shutter by renewing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown complete all as specified and directed.

d) Stiffeners as per drg

e) PVC Shoes std quality all as per drg

f) Welding the joints of legs / square tube as per drg

g) Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Make: Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/AGE(I) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

ALMIRAH LARGE STEEL (FD-67/1031/TP/MAP)

a) Brass/Steel 6 lever locks (Make-Godrej/Link/Mydas) as per drg

b) CP Handle as per drg

c) Legs as per drg

d) Repairs to door as specified including renewal of hinges

e) Repair/adjustment to existing shelf including welding as per drg

f) Shutter/door as per drg.

g) Shelf as per drg

ALMIRAH MEDIUM / SMALL STEEL (FD-1032/104(M)

a) Brass/Steel 6 lever locks (Make-Godrej/Link/Mydas) as per drg

b) CP Handle as per drg

c) Legs as per drg

d) Repairs to door as specified including renewal of hinges

e) Repair/adjustment to existing shelf including welding as per drg

f) Shutter as per drg.

g) Shelf as per drg

TABLE 3 X 2 WITH AND W/O DRAWER & TABLE 3'X3' (FD-1008 / 1007/ 1009)

a) Welding wherever required as directed by E-in-Incharge

b) Top 18 mm thick of size 3'x2' made of MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/AGE(I) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

c) Top 18 mm thick of size 3'x3' made of MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/AGE(I) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

d) Repairs to Drawer by renewing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown complete all as specified and directed

e) Rubber shoe std quality as per drg

f) Lock of drawer as per drg (Make-GODREJ/HETTICH/LINK/RINOX)

CHAIR STEEL TUBULAR WITH ARMS (FD-75(M)

a) Second class Hard wood seat frame including cane work two coats of synthetic enameled painting over a coat of primer and putty fitting in position all as per drg

b) Second class Hard wood back frame including cane work two coats synthetic enameled painting over a coat of primer and putty fitting in position all as per drg

c) PVC Arm rest as directed by EIC

d) Hard rubber shoes as per drg

e) Rubber cap for conduit pipe as per drg

f) Welding wherever required as directed.

CHAIR STEEL TUBULAR WITHOUT ARMS (FD-75(M)

a) Second class Hard wood seat frame including cane work two coats of synthetic enameled painting over a coat of primer and putty fitting in position all as per drg

b) Second class Hard wood back frame including cane work two coats of synthetic enameled painting over a coat of primer and putty fitting in position all as per drg

c) Hard rubber shoes std quality as per drg

d) Rubber cap for conduit pipe as per drg

e) Welding wherever required as directed

CHAIR VARANDAH (FD-19/256/359/MAP /11/MAP-II/15)

a) Conduit section any member of MS conduit pipe 16G, 19mm dia as per drg.

b) Welding joints of leg of 19/20mm MS tube & other joints as per drg as directed.

c) Hard rubber shoes as per drg

d) Removing old unserviceable cane from chair verandah & recaning the chairs etc with approved new plastic cane 4 mm wide half round as per Matt Pattern all as specified(colour of cane shall approved by EIC/AGE(I))

(e) Removing old broken PVC seat & Back of each verandah and S&F new PVC Seat and back 4mm thick as specified and directed

LOCKER STEEL (FD-1029/257/SKD-562)

(a) CP handels as per drg

(b) S/S Hasp & Staple , rest as per drg

(c) Repairs to door/sides including renewal of hinges

d) Shutter/door as per drg.

(e) Legs as per drg

(f) CP Conduit pipe as per drg

g) Shelf as per drg.

h) Brass/Steel 6 lever locks (Make-Godrej/Link/Mydas) as per drg

i) Drawer complete including fixing as per drg.

CHARPOY IP PLY TOP (FD/MAP-II/01)

a) 12 mm thick plywood top BWP grade (Make-Century ply/Greenply/Archidply) as per existing shape and size with 8 Nos shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed

b) Hard rubber shoe std quality as per drg

c) Welding work wherever required as directed by EIC

CHAIR COMPUTER / REVOLVOING (FD/E6/MAP/01 & TP)

(a) S&F new seat made of 12mm thick hot pressed plywood with fabric polyproplene /acrelic (range of fabrics not less than Rs 300/ Rm)and mouled polyurethene foam 40 Density with PVC lipping all round complete all as shown on drawing.

(b) All as above but back complete.

(c) PU arms as per drg

(d) Complete pedestal assy std quality complete all as per drg and directed.

(e) Supplying and fixing new twin wheel castors of required dia complete all as directed.

(f) Supply & fix new chrome free cylinder tube shall be fixed complete all as per drg and directed.

(g) Supply & fix new Locking lever assembely as shown in drawing complete all as directed.

CHARPOY GI PIPE PLY TOP (FD-220)

a) 12 mm thick plywood top BWP grade (Make-Century ply/Greenply/Archidply) with teak wood half round bead as per existing shape and size with shunken nut/bolts as required ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed

b) 25mm mild steel square tube 20 cm long not less than 16 gauge thick each welded to GI Charpoy pipe in four corner to support. Duly painted complete all as specified and directed.

c) S&F stiffener in renewal of 25 mm mild steel square tube 80 cm long not less than 16 Gauge in thickness each welded to GI Charpoy pipe complete all as specified and directed.

d) S&F in renewal of long rail of 32 mm dia Medium grade GI pipes ISI Marked all as specified and shown on drg Make of pipe Jindal/Prakash/TATA complete all as specified and directed.

e) S&F in renewal of short rail for charpoy GI pipe 32mm bore but "except pipe" including cutting threading etc as required and directed. Note : Pipe shall be used from unserviceable long rail obtained from item No 18 (d) here in before.

f) S&F in renewal of legs for charpoy GI pipe 32mm dia but "except pipe" including cutting threading etc as required and directed with bottom plug made of Sal wood and flat iron clamp 02 Nos for MNF set duly painted with two coats of black paint complete all as specified and directed. Note : Pipe obtained from ser item No 18 (d) & (e) above shall be used for this items.

g) S&F in renewal of GI 3 way elbow 32 mm dia complete all as specified and directed.

h) S&F in renewal of 32mm check nuts complete all as specified and directed.

i) Welding work wherever required as directed by EIC

j) S&F in renewal of nylon newar to Charpoy GI Pipe, tightening of loose components of complete charpoy and S&F new plywood top 12 mm thick BWP grade (Make: Greenply/Centuryply/Archidply) ISI marked of required size fixed with mild steel galvanised iron nuts and bolts of required size and suitable length, 12 mm x 6mm thick 1st class teak wood beading half round along with the edges of the plywood and round at corner fixed with fevicol and headless nails, S&F three dtiffeners 900 mm long made out of MS flat iron, 40x5 mm duly painted with two coats of black colour synthetic enamel paint over a one coat of red oxide primer to be fixed over the long rails by drilling holes in flat iron and long rail by two nos of semi circular top of 6mm dia 65mm long nut and bolts. 10 nos Nut and bolts with semi cirular top of 6mm dia and 65mm long with steel washers to be used (03 nos at each long rail, 02 nos at each short rail) and 06 nos nuts and bolts with semi circular top of 4 mm dia and 35 mm long with steel washers to be used (02 nos at each flat iron in between long rail) for fixing of plywood top complete all as specified and directed.

CHARPOY IP FOLDING [FD-388(R) ]

a) 12 mm thick plywood top BWP grade (Make-Century ply/Greenply/Archidply) as per existing shape and size with 10 Nos shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed

(b) Circular pipe/flat iron as requied

c) Hard rubber shoe std quality as per drg

d) Welding work wherever required as directed by EIC

TABLE DINING OR A/TOP (FD-165(M)

a)Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly fixed with 1mm stainless steel to be fixed as table top all as specified and directed by EIC/AGE(I).

b) Leg/Stiffner/short rail of MS 25mm square tube of 1.6mm thick complete all as specified and directed.

c) Long Rail/middle support complete all as specified and shown on drg and as directed.

BED HARD (FD/E6/MAP/08(R)

a) 12 mm thick plywood top BWP grade ( Make: Greenply/ Archidply/ Century ply) as per existing shape and size with 8 Nos Shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed.

b) ScrewingWelding wherever required as directed,

c) Long Rail as per drg.

d) Short Rail as per drg.

e) Stiffeners as per drg.

f) Head rest/foot rest including complete frame shall be of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Make: Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) with 0.8 mm thick laminate on both side in colour/shade as approved by EIC/AGE(I) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on all four sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

g) Hard rubber shoe std quality as per drg

TABLE COMPUTER (FD/E6/MAP/03 OR ANY TYPE)

a) Top 18 mm thick of table computer made of MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/AGE(I) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

b) ScrewingWelding wherever required as directed.

c) Drawer made of 18 mm thick pre laminated MDF board Exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) of shade as approved by EIC/AGE(I) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with telescopic channel of make: Hettich/Ebco/Link. Rest all as per drg.

d) Shelves made of 18 mm thick pre laminated MDF board Exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) of shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with telescopic channel of make: Hettich/Ebco/Link. Rest all as per drg.

e) Table computer framing made out of 25 mm sq pipe 18G as per drg.

f) Rectangular PVC cover made to shape with nylon buffer std quality as per drg

TABLE BED SIDE MAP (FD/E6/MAP/15(R)

a) Back/sides of table bed side map made of 16 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) with 0.8 mm thick laminate in colour/shade as approved by EIC/AGE(I) with 2 mm thick PVC edging allround of Make-Rehau/Pegasus/Kynex shall be fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

b) ScrewingWelding wherever required as directed.

c) Complete Drawer/cabinet made of 18 mm thick pre laminated MDF board Exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) of shade as approved by EIC/GE with 2 mm thick PVC edging allround of Make-Rehau/Pegasus/Kynex with telescopic channel of make: Hettich/Ebco/Link. Rest all as per drg.

d) 25 mm Sq pipe 18 G including fixing as per drg.

e) PVC Shoes std quality all as per drg

(A) M&L for hammertone paint with shad as approved by EIC / AGE (I) over a coat of primer through spray machine, both internally & externally for item Sl No. 25,26,27 & 31 and for rest of item shall be painted two coats of synthetic enamel paint with shade as approved by EIC / AGE(I) over a coat of primer through spray machine, both internally and externally to the following furniture articles, all are of MES pattern viz F/FD/DB/MAP series or similar items including removing of dust, dirts, dents etc and removing of existing paint both internally and externally, applying putty to level the surface before primer / painting all as specified and shown on drgs and directed. (B) Work will be executed where the furniture exist in different user units / md accn of AGE (I) Fatehgarh including BS future yard as directed.

Almirah steel medium / small (FD-1032)

Almirah steel large (FD-67/351/1031)

Charpoy IP hard Top (FD/MAP-II/01)

Chair Steel Tubular with and w/o arms (FD-75(M)

Chair Verandah (FD-19/256)

Locker Steel (FD-1029/257/127)

BED HARD (FD/E6/MAP/08(R)

Table office officer steel (FD-1003)

Table Clk steel (FD-1004)

Table 3 x 2 with and w/o drawer & Table 3' x 3' (FD-1007/1008)

Charpoy IP folding (FD-388(R)

Rack Steel any type / book shelf open large / book case steel (FD-1038/1028 & 1023/69)

Table Dining or A/ Top (FD-165(M)

Rack Shoe Steel (FD/E6/MAP/02R)

KHAZAN SINGH SAWHNEY

JAISWAL ENTERPRISES