PROVN OF TRG SHED FOR RAJ, ADDN ALTN OF TOILETS IN BLDG NO 172 AND 173, RENOVATION OF STAFF TOILET AND BATHROOM OF MH OFFR MESS BLDG NO P-143 AND ADDN ALTN IN BLDG NO P-08 FH MG ENCLAVE HALDIGHATI AT JAIPUR MIL STN UNDER GE (S) JAIPUR

Amount

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 316

Excavating in post holes (or similar holes) each n.exc 0.50 cum,getting out, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 18

M&L plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate in foundations filling and mass concrete complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 5

S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 1250

M&L Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 216

S&F Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other,or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 30

S&F MS Black Pipe 100mm bore and /or MS hollow section (square/rectengular) conforming to IS 1161 grade Yst 240, medium grade, fixed in vertical position complete all as specified and as directed 10/LBW/61SA/22-23/Q3W: 715

S&F Fe 410 -W (Gde- E- 250) Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and as directed 10/LBW/61SA/22-23/Q3W: 65

M&L Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome primer complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 90 42/MIN/61SA/Q3W/2022-23: 0.30

M&L for stone (crushed/broken) hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface as in plinth protection etc complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 2.5

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub-base/ base floor even and fair without using extra cement complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 306

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 22.5 E/M 10/LBW/61SA/22-23/Q3W: 36

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 15 33/MIN/61SA/Q3W/2022-23: 1

M & L 25mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in base floor to received floor finish complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 78 33/MIN/61SA/Q3W/2022-23: 28

M & L Machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick cement mortar 1:4 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 78

Formwork to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter flat and fair finish surfaces of concrete complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 44

M&L for RCC nominal mix Type B1 1:2:4 (20mm graded stone aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 8

Formwork to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal rough finished surfaces in shape complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 30

M&L for RCC nominal mix Type B1 1:2:4 (20mm graded stone aggregate) for columns, pillars, pierrs, posts & struts etc complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 2

Formwork to sides and soffits of floors or roof beams haunching, girders bressumers lintel cantilevers shelves including supports, overhangs etc also splays between floors and beams etc flat & rough finish concrete surface complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 25.5

Formwork to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc flat & rough finish concrete surface flat & rough finish concrete surfaces complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 90

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 46

M&L RCC nominal mix Type B1 1:2:4 (20mm graded stone aggregate) for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc etc complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 20.5

M&L mild steel TMT bars Fe-500D 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 2100

M&L mild steel TMT bars Fe-500D 5mm dia and overupto and including 10mm dia in stirrups, spaces and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 100

S&F 30mm thick fiber glass Reinforced plastic (F.R.P) flush door in different plain and wood finish made with fire retardant grade unsaturted polyester resin, moulded to 3mm thick FRP laminated all around, with suitable wooden blocks inside at required places for fixing of fittings and polystyrene foam (PUF) poystrene foam to be used as fillar material throughout the hollow pannel, casted monolithically with testing parameters of F.R.P laminate confirming to table 3 of IS 14856 complete all as specified by the manufacturer's instruction & complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 7

S&F Mild Steel Butt hinges, 100mm with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 9 33/MIN/61SA/Q3W/2022-23: 21 42/MIN/61SA/Q3W/2022-23: 15 20/MIN/61SA/Q3W/22-23: 36

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 3 33/MIN/61SA/Q3W/2022-23: 14 42/MIN/61SA/Q3W/2022-23: 10 20/MIN/61SA/Q3W/22-23: 12

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 3 33/MIN/61SA/Q3W/2022-23: 2 42/MIN/61SA/Q3W/2022-23: 12

S&F Aluminium handles 150 mm size, cast type, anodised complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 6 33/MIN/61SA/Q3W/2022-23: 14 42/MIN/61SA/Q3W/2022-23: 10 20/MIN/61SA/Q3W/22-23: 12

S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 3

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in excavated soil complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 15 EM Portion: 10/LBW/61SA/22-23/Q3W: 13

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or concrete surfaces, finished fair & even complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 160 42/MIN/61SA/Q3W/2022-23: 18 20/MIN/61SA/Q3W/22-23: 60

M & L for rendering 15mm thick on fair faces of brick work or concrete in CM 1:6 surfaces finished fair and even without using extra cement complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 75 42/MIN/61SA/Q3W/2022-23: 22

M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces including finished fair & even without using extra cement on ceiling complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 100 42/MIN/61SA/Q3W/2022-23: 10

M & L for preperation of new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 60 42/MIN/61SA/Q3W/2022-23: 18 20/MIN/61SA/Q3W/22-23: 60

M&L for preparation of new plastered surfaces and applying two coats of Oil bound distemper of approved shade/tint over 1mm thick Birla wall care putty on walls complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 70 20/MIN/61SA/Q3W/22-23: 60

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 100 42/MIN/61SA/Q3W/2022-23: 10 33/MIN/61SA/Q3W/2022-23: 10

M&L MS angle iron door frame 40x40x6mm confirming to Fe-310-0 incl.10mm dia deformed tie bar for strengthening at bottom of chowkhat beneath PCC floor complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 55

M&L mild steel hold fast 25x3mm welded to angle iron door frame with nut & bolt / welded to frame conforming to Fe-290 Gde-E-165. Complete all as specified and as directed 10/LBW/61SA/22-23/Q3W: 16

M&L Sand filling under floors or in foundations including watering and consolidation except sand complete all as specified and as directed. Note:- Earth (excavated soil) obtained from item No 01 & 12 will be used in filling under floor 10/LBW/61SA/22-23/Q3W: 16

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 200

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. 10/LBW/61SA/22-23/Q3W: 3.7

Dismantling of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 148 42/MIN/61SA/Q3W/2022-23: 71 20/MIN/61SA/Q3W/22-23: 102

M & L Glazed digital ceramic coloured tiles in vertical surface 350 x 250 x 7mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering on stone masonary surface or surface other than fair faces of brick work in CM 1:4 complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 120 42/MIN/61SA/Q3W/2022-23: 55

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 28 42/MIN/61SA/Q3W/2022-23: 16 20/MIN/61SA/Q3W/22-23: 12

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in Slab,steps, jambs, pillars, window cills and all horizontal portion and like in 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 5

Taking down GI tubing 15mm dia, with connections complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 80 42/MIN/61SA/Q3W/2022-23: 18 20/MIN/61SA/Q3W/22-23: 20

Taking down GI tubing 20mm dia, with connections complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 30 42/MIN/61SA/Q3W/2022-23: 25 20/MIN/61SA/Q3W/22-23: 20

Supply & Fixing for steel water tubing, galvanised, medium grade, with all fittings and fixed complete to walls & ceiling or laid in floors etc of size of tubing 15 mm bore complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 80 42/MIN/61SA/Q3W/2022-23: 18

Supply & Fixing for steel water tubing, galvanised, medium grade, with all fittings and fixed complete to walls & ceiling or laid in floors etc of size of tubing 20 mm bore complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 30 42/MIN/61SA/Q3W/2022-23: 25

Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 80

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 7 20/MIN/61SA/Q3W/22-23: 2

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formaldehyde resin adhesive confirming to IS-710. The size of rails & style shall be as per IS-1003 complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 4

M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 8

M&L Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 9 42/MIN/61SA/Q3W/2022-23: 7 20/MIN/61SA/Q3W/22-23: 5

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 25 42/MIN/61SA/Q3W/2022-23: 15 20/MIN/61SA/Q3W/22-23: 18

M&L for rendering 10 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:6 finished even & fair all as specified and directed. 33/MIN/61SA/Q3W/2022-23: 10

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 7 42/MIN/61SA/Q3W/2022-23: 7

S&F aluminium powder coated minimum thickness of power coated 50 micron of approved colour ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.50 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including supply and fixing S.S wire gauge of 0.36mm dia and 1.40 width of aperture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old steel ventilator complete. Note:- (i) Section No given above are of make Jindal, Contractor may use similar section specification of other make mention in Appx B 33/MIN/61SA/Q3W/2022-23: 4

Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 mm (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section specification of other make mention in Appx B 33/MIN/61SA/Q3W/2022-23: 2

Providing and fixing white glazed vitreous china wash basin with C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern, 32mm dia C.P. brass bottle trap and union, 32mm dia C.P. pipe to wall and C.P. wall flange complete including supply of C.I. Brackets, painted white required C.P. brass, screws, nuts, bolts, consumable complete, cutting and making good the walls wherever required. Oval wash basin 486 x 418mm for mounting under and including the granite counter slab of approprite size in Toilets. Oval Basin:Kohler Cat No.:K-2219-0 Bottle trap: Kohler K-164071N-CP Waste coupling: Kohler K-9031IN-CP or equivalent 33/MIN/61SA/Q3W/2022-23: 4

S&F in repair SS Soap dish holder fixed to wall complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 2 42/MIN/61SA/Q3W/2022-23: 2

S&F in repair Towel rail 600mm long of stainless steel chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 3 42/MIN/61SA/Q3W/2022-23: 2

S&F in repair Urinal, Size: 355x340x535mm vitreous china bowl white colour with grating in and union for discharge pipe incl providing and fixing plug bedding urinal against wall in CM 1:2 securing urinal to plugs incl 60mm long brass screws and providing and fixing suitable urinal spreader and pointing around urinal back in cement complete all as specified and as directed.(Make: Jaguar, cat part - URS-WHT-13261) 33/MIN/61SA/Q3W/2022-23: 4

S&F in repair brass chromium plated Urinal valve auto closing system with built in control cock & wall flange complete all as specified and as directed. Make: Jaquar Cat No PRS-077 or equivalent of make mention Appx B 33/MIN/61SA/Q3W/2022-23: 4

S&F in repair 32 mm dia LDPE pipe of pressure rating 6 kgf/cm2 fixed complete to wall ,ceiling or floors including all fittings complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 4

M&L Granite stone slab 15 to 18 mm thick (table rubbed and polished) in Partition including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 2

S&F in repair white vitreous china wash down water closet pan (pedestal pattern) with PVC seat white in colour, closed recessed seat cover with mild steel chromium plated or aluminised hinging device including connection to drowm pipe and flushing pipe complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 2

S & F in repair vitreous china squatting pan, 'Orissa' pattern size 580x 440mm white, with integral foot rests ( excluding flushing cistern and flush pipe ) complete including P & S trap, PCC bedding etc all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 3 42/MIN/61SA/Q3W/2022-23: 2

Supply and Fixed in repair 15mm bore angular Stop valves, Chromium plated fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 24 42/MIN/61SA/Q3W/2022-23: 6 20/MIN/61SA/Q3W/22-23: 3

M&L for complete removal of existing treatment and applying two coat of oil bond distemper over one coat primer over and including 1 mm wall care putty by any means on plaster surface/concrete/PCC engrs board surface complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 50 42/MIN/61SA/Q3W/2022-23: 10

M&L for complete removal of existing treatment and apply two coat of oil bound distemper on ceiling surface over a one coat of primer complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 30 42/MIN/61SA/Q3W/2022-23: 12 20/MIN/61SA/Q3W/22-23: 60

Dismantling old water tanks & Supply and fix 500 litres capacity 3 layer construction, white coloured rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 1 42/MIN/61SA/Q3W/2022-23: 1 20/MIN/61SA/Q3W/22-23: 1

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 14 42/MIN/61SA/Q3W/2022-23: 6 20/MIN/61SA/Q3W/22-23: 4

S&F in repair PVC valveless 10 ltr capacity, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 5 42/MIN/61SA/Q3W/2022-23: 2

Supply and Fixed in repair 15mm bore bib taps,fancy type, cast copper alloy, with capstan heads,chromium plated , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 6 42/MIN/61SA/Q3W/2022-23: 4

S&F in repair Health faucet (ABS Body) with 1 meter long PVC tube & wall hook complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 2

S&F in repair WHB mixer single lever 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and as directed. (Cat Part No : 35011BPM) Make : Jaquar (Make: Hindware,Cat Part No : F410012)(Make: Cera,Cat Part No : F1018452) 33/MIN/61SA/Q3W/2022-23: 4

S&F in repair CP shower rose (min wt 125gm) any size with shower arm 15mm size 195mm long with band of 45 degree with flange of of CP (min wt 125gm) including fixing to steel pipe or union complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 2 42/MIN/61SA/Q3W/2022-23: 2

S & F in repair 15 mm dia stop cock ( concealed type) , cast copper alloy chromium plated , fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 5 42/MIN/61SA/Q3W/2022-23: 2

Dismantling of 100/75 mm dia cast iron / PVC Pipe or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 90 42/MIN/61SA/Q3W/2022-23: 30

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor ( Joining to be done with solvent cement ) including PVC brackets complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 30 42/MIN/61SA/Q3W/2022-23: 15

M & L for Concrete bed PCC 1:3:6 type C2 concrete to 110 mm pipe drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 30 42/MIN/61SA/Q3W/2022-23: 15

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed on wall or laid in trenches or in floor ( Joining to be done with solvent cement ) including PVC brackets complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 60 42/MIN/61SA/Q3W/2022-23: 15

S & F in repair PVC (SWR) 75 mm floor trap, plain with grating including jointing with solvent cement fixed in cement concrete type B1 1:2:4 complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 14 42/MIN/61SA/Q3W/2022-23: 4

S & F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls dia of pipe 110 mm complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 24

S&F in repair 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 10 42/MIN/61SA/Q3W/2022-23: 2

S&F in repair 75mm diaPVC (SWR) bends any radius complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 14 42/MIN/61SA/Q3W/2022-23: 4

S & F in repair PVC (SWR), junction single, (Single T) equal or unequal with oval access door dia of pipe 75 mm complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 6

S & F in repair PVC (SWR), junction single, (Single T) equal or unequal with oval access door dia of pipe 110 mm complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 4

S & F in repair PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 6

Cutting into existing manholes/ septic tank for connecting new drains making good to pipe and rendering , cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1, smooth finished and reforming benching as required for 150mm bore pipe complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 2

Taking down cement plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish outside MoD land complete all as specified and as directed. 42/MIN/61SA/Q3W/2022-23: 50 20/MIN/61SA/Q3W/22-23: 120

M&L three coat of white wash on wall including preparation of newly plaster surface complete all as specified and as directed. 42/MIN/61SA/Q3W/2022-23: 22

S & F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed. 42/MIN/61SA/Q3W/2022-23: 0.3

S & F figured glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane in 4 mm thickness complete all as specified and as directed. 42/MIN/61SA/Q3W/2022-23: 0.3

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm CI bracket 15mm dia polythene connection 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. and including pedestal complete all as specified, including taking down the existing wash hand basin complete all as specified and as directed. 42/MIN/61SA/Q3W/2022-23: 2

S&F in repair 15mm bore Pillar taps,fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. 42/MIN/61SA/Q3W/2022-23: 2

Supply and fixed in repairs CP WHB mixer cast coper alloy with central hole for WHB and long shank fancy type 15 mm bore complete all as specified and as directed.. Make-Jaquar Cat. No. Con-167KNB , Kohler cat No.K-18161IN-ND-CP and Roca Cat No. A5A474BC00 20/MIN/61SA/Q3W/22-23: 1 42/MIN/61SA/Q3W/2022-23: 1

Supply and fixed in repairs CP brass hot and cold 15mm dia wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg & wall flange complete all as specified and as directed. Make-Jaquar Cat. Con-281KN, Kohler Cat No. K-16298IN-9-CP and Roca Cat No. RT5A1709CA1 20/MIN/61SA/Q3W/22-23: 1

Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type long body complete all as specified and as directed. Make-Jaquar Con-107KN, Kohler Cat No. K-11749IN-9-CP and Roca Cat Part No. RT5A7820CA1 20/MIN/61SA/Q3W/22-23: 1

Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type two way Bib Cock complete all as specified and as directed. Make-Jaquar Con-041KN, Kohler Cat No. K-37320IN-4-CP and Roca Cat Part No. RT5A9320CA1 20/MIN/61SA/Q3W/22-23: 1

S&F in repairs CP overhead shower dia 110 mm round with revolving joints (with body rotation) & 115mm long arm shower with rabit cleaning system and all fittings complete all as specified and as directed. Make - Jaquar OHS-1709, Kohler Cat No. K-724191N-CP and Roca Cat No. RT18700A1 20/MIN/61SA/Q3W/22-23: 1

S&F in repair Toilet paper holder complete all as specified and as directed. Make : Jaquar Code ACN-1153S, Kohler Cat No. K-56331N-CP and Roca Cat No. RA816384001 20/MIN/61SA/Q3W/22-23: 1

S&F in repair CP single towel rail 600 mm complete all as specified and as directed. Make : Jaquar-AKP-35711PS, Kohler Cat No.K-250651N-CP and Roca Cat No. RA816070165 20/MIN/61SA/Q3W/22-23: 1

S&F in repair Soap dish complete all as specified and as directed. Make :Jaquar Code AQN-7731, Kohler Cat No. K-56341N-CP and Roca Cat No. RA816070132 20/MIN/61SA/Q3W/22-23: 1

S & F in repair for CP hand shower (Health faucet) with 15 mm dia, 1.2 meter long flexible tube & wall hook with N.R.V (Back Flow Preventer) complete all as specified and as directed. Make : Jaquar CAT Part No. ALD-577 , Kohler Cat No. K-129271N-CP and Roca Cat No. RF9060A1 20/MIN/61SA/Q3W/22-23: 1

S & F in repair hand shower 105 mm dia round shape multi flow with air effect (ABS Body & Face Plate Chromium Plated) with rubit cleaning system and incl Easy flex tube in chromium finish 1.5 meter long with both end nuts complete all as specified and as directed. Make : Jaquar CAT Part No. HSH-1721, Kohler Cat No. K-72421IN-CP and Roca Cat No. RF5B1B03C07 20/MIN/61SA/Q3W/22-23: 1

S & F in repair CP towel ring round complete all as specified and as directed.. Make : Jaquar, CAT Part No AQN-7721, Kohler Cat No. K-5631IN-CP and Roca Cat No. RA816070172 20/MIN/61SA/Q3W/22-23: 1

S&F in repairs concealed stop Cock with wall flange incl all fittings complete all as specified and as directed.Make : Jaquar Cat No. CON - 083 KN or its Equivalent. 20/MIN/61SA/Q3W/22-23: 2

S&F in repair 15mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm- 142 gms) complete all as specified and as directed. 20/MIN/61SA/Q3W/22-23: 1

M & L for 3-layer PP-R 20 mm dia Polypropylene rando copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed. 20/MIN/61SA/Q3W/22-23: 20

M & L for 3-layer PP-R 25 mm dia Polypropylene rando copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed. 20/MIN/61SA/Q3W/22-23: 30

S&F in repairs white rimless Single piece-WC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set and cistern fittings, S trap, incl all neccessories items complete all as specified and as directed. Make : Jaquar, CAT Part No OPS-WHT-15853S300UF, Roca Cat Part No. RS34273700H and Kholer Cat part No. K-77739T-SL-0 20/MIN/61SA/Q3W/22-23: 1

S&F in repairs counter top oval wash hand basin vitreous china white (flat back) of size 545 X 545 X 180 mmincluding all fittings complete all as specified and as directed. Make : Jaquar Cat No. CON -FSS-WHT-29601, Kohler Cat No. K-4126K-00 and Roca Cat part No. RS327875001 and Grohe 20/MIN/61SA/Q3W/22-23: 1

S&F in repairs CP grating 100mm dia round with or without waste hole fixed on floor/nahani trap fixed with cement complete all as specified and as directed. 20/MIN/61SA/Q3W/22-23: 3

S&F in repairs CP grating 100mm dia round with or with waste hole fixed on floor/nahani trap fixed with cement complete all as specified and as directed. 20/MIN/61SA/Q3W/22-23: 1

Dismantling old water tank and S&F rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) hoisted and fixed in position 1000 ltrs capacity including disonnecting and refixing the GI pipe and fittings complete all as specified and as directed. 20/MIN/61SA/Q3W/22-23: 1

M&L for Vitrified ceramic coloured tiles (of approved light shade) of size 600x 600mm, 9 to 10 mm thick in floor, set & jointed in neat cement slurry including a layer of screed bed 15mm thick 1:6 and pointed in coloured cement to match the shade of tiles over cement screed bed complete all as specified and as directed. 20/MIN/61SA/Q3W/22-23: 50

M&L glazed ceramic tiles in vertical surface 300x600x7 mm / 450x350x7 mm thick set and including 10mm thick layer of screed bed in cm 1:4 on verticle surfaces and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tiles as on verticle surfaces as skirting and dado etc,complete all as specified and as directed. 20/MIN/61SA/Q3W/22-23: 40

S&F 5mm thick looking mirror and looking mirror edges moulding, including hole 4 Nos for looking mirror and incl S S cap screw complete all as specified and as directed. 20/MIN/61SA/Q3W/22-23: 0.5

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 20/MIN/61SA/Q3W/22-23: 8

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed. 20/MIN/61SA/Q3W/22-23: 4

M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in and including casing caping 25 mm wide medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings

One light/fan/ bell point controlled by one, one way switch. 10/LBW/61SA/22-23/Q3W: 38

One 3 pin 5 Amp socket outlet on same board with other switches. 10/LBW/61SA/22-23/Q3W: 2

One 3 pin 5 Amp socket outlet on independent board with other switches. 10/LBW/61SA/22-23/Q3W: 12

All as per Item No 126 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly. 10/LBW/61SA/22-23/Q3W: 12

S&F switch, piano type 230/250 volts flush complete

Single pole, one way 5 Amp rating 10/LBW/61SA/22-23/Q3W: 52

Single pole 16 Amps rating 10/LBW/61SA/22-23/Q3W: 12

S&F Socket, piano type 230/250 volts

Socket outlet 05 Amp rating two in one 5/15A 3 pin 10/LBW/61SA/22-23/Q3W: 14

Socket outlet 15 Amp. Rating combination of 5A/15A 5 pin 10/LBW/61SA/22-23/Q3W: 12

M&L Ceiling rose surface bakelite, 3 Phase/ PVC/ Polycarbonate isolated body (ISI marked) complete all as specified and as directed 10/LBW/61SA/22-23/Q3W: 36 42/MIN/61SA/Q3W/2022-23: 8 20/MIN/61SA/Q3W/22-23: 56

S&F Ceiling fan size 1200mm sweep, 5 Star rating, 3 blades, white color, single phase AC, 230 Volts complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Complete all as specefied and as directed by Engineer-in-Charge. Make: Havells cat Part No. ES-50 or equivalent 10/LBW/61SA/22-23/Q3W: 8

Supply & fix LED retrofit lamp ( size-4 feet), Regal Batten for LED tube, universal batten for T5 lamps surface/wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size complete. Make - Havells cat No - REGALBATTENT5UPTO1X18WDSBSWH Or equivelent model in Bajaj/Wipro/ Philips/CG /Surya roshni 10/LBW/61SA/22-23/Q3W: 30

S&F factory made, sheet distribution boards, SP&N8 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar complete 10/LBW/61SA/22-23/Q3W: 1

S&F in repair MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating :-

SP 5 to upto 32 amps 10/LBW/61SA/22-23/Q3W: 6 42/MIN/61SA/Q3W/2022-23: 6 20/MIN/61SA/Q3W/22-23: 18

SPN above 32 to 63 amps. 10/LBW/61SA/22-23/Q3W: 1 42/MIN/61SA/Q3W/2022-23: 1 20/MIN/61SA/Q3W/22-23: 3

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 2 core complete 10/LBW/61SA/22-23/Q3W: 190

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth strip 25X 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 25 mm dia " light grage " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 5 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-2 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as per specified and directed by Engr-in-Charge . ( Note : PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner). 10/LBW/61SA/22-23/Q3W: 1 42/MIN/61SA/Q3W/2022-23: 1 20/MIN/61SA/Q3W/22-23: 3

Removing of excavated material (soil) to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.50metre above the starting point 10/LBW/61SA/22-23/Q3W: 23.4

M & L Sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover. 10/LBW/61SA/22-23/Q3W: 25

M&L bricks for protection cover to under ground cable (with old size sub class `B` bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm as directed by Engineer in-charge 10/LBW/61SA/22-23/Q3W: 1.8

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell/buzzer,bracket light fittings etc(excluding fans and fan regulators) and making good disturbed surfaces of walls, floors, etc. to match with existing surface, complete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 30 20/MIN/61SA/Q3W/22-23: 65

Taking down existing exhaust fan including connected accessries of any type or make safely and refixing after oiling, greasing and servicing and replacing the unserviceable/ deterriorated minor parts completely and made in serviceable condition duly painted with synthetic enamel paint in grey/ smookey grey color complete all as specified including writing MES No, comcomplete all as specified and as directed. 33/MIN/61SA/Q3W/2022-23: 3

M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in concealed/ pvc conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings

One light/fan/ bell point controlled by one, one way switch. 33/MIN/61SA/Q3W/2022-23: 20 42/MIN/61SA/Q3W/2022-23: 6 20/MIN/61SA/Q3W/22-23: 42

One 3 pin 5 Amp socket outlet on same board with other switches. 33/MIN/61SA/Q3W/2022-23: 5 42/MIN/61SA/Q3W/2022-23: 2 20/MIN/61SA/Q3W/22-23: 7

One 3 pin 5 Amp socket outlet on independent board with other switches. 33/MIN/61SA/Q3W/2022-23: 2 42/MIN/61SA/Q3W/2022-23: 2 20/MIN/61SA/Q3W/22-23: 8

All as per Item No 142 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly. 20/MIN/61SA/Q3W/22-23: 6

All as per Item No 142 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly. 33/MIN/61SA/Q3W/2022-23: 3 42/MIN/61SA/Q3W/2022-23: 2 20/MIN/61SA/Q3W/22-23: 2

S&F Buzzer, Ding Dong AC. 230 volts, single pole, complete all as specified and as directed by Engr-in-Charge. 20/MIN/61SA/Q3W/22-23: 2

S&F in repairs of Modular switch, piano type flush/ Bell push button type 230/250 volts ISI marked following, complete all as specified and as directed by Engr-in-Charge.

Modular switch 1 way 6A, 1 module 33/MIN/61SA/Q3W/2022-23: 25 42/MIN/61SA/Q3W/2022-23: 10 20/MIN/61SA/Q3W/22-23: 57

Modular switch 1 way 16A, 1 module 33/MIN/61SA/Q3W/2022-23: 5 42/MIN/61SA/Q3W/2022-23: 1 20/MIN/61SA/Q3W/22-23: 6

Modular Bell push 6A 1 module 20/MIN/61SA/Q3W/22-23: 2

S&F Modular Socket, 6A - 2/3 pin combined 2 module,, 33/MIN/61SA/Q3W/2022-23: 5 42/MIN/61SA/Q3W/2022-23: 3 20/MIN/61SA/Q3W/22-23: 15

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module, 33/MIN/61SA/Q3W/2022-23: 5 42/MIN/61SA/Q3W/2022-23: 1 20/MIN/61SA/Q3W/22-23: 6

S&F in repair 20 Watt, LED (1.2 M) smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having brightness lumen not less than 2000 Lm complete all as specified and directed. Make: Philips 20 W 919515813875_1 or other equivalent as per Appx B. 33/MIN/61SA/Q3W/2022-23: 8

162. S&F in repair 10 watt LED (.6 M) smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having lumen output not less than 100 lumens per watt complete all as specified and directed. Make: Philips 20 W 919515813927_2 or other equivalent as per Appx B. 33/MIN/61SA/Q3W/2022-23: 4

Disconnecting and taking down Geyser of any make/type safety and refixing the same after servicing and replacing the unserviceable/deteriorated minor part completely all as specified and directed by Engr-in-Charge. Note :- cost of items replaced are included in the qupted rate. 33/MIN/61SA/Q3W/2022-23: 2

Supply & fix Exhaust fan steel body AC single phase 230 V of size 300mm sweep heavy duty with blades and frame and louvers all as specified and directed, complete all as specified 33/MIN/61SA/Q3W/2022-23: 2 42/MIN/61SA/Q3W/2022-23: 1 20/MIN/61SA/Q3W/22-23: 2

S&F in repair factory made, sheet distribution boards, SP&N 12 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar of the under mentioned rating :- 42/MIN/61SA/Q3W/2022-23: 1 20/MIN/61SA/Q3W/22-23: 3

M & L Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn throughn and including PVC rigid conduit and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 6 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity. 42/MIN/61SA/Q3W/2022-23: 30

M & L Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn throughn and including PVC rigid conduit and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 4 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity. 20/MIN/61SA/Q3W/22-23: 79

S&F electric water heater (geyser) storage type stainless steel body with copper inner tank and heating element upto 2 KW capacity 25 litre BEE 5 star rate complete with all accessories such as safety valve thrmostate NRV connection pipe etc., complete all as specified 42/MIN/61SA/Q3W/2022-23: 1 20/MIN/61SA/Q3W/22-23: 1

Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt complete 42/MIN/61SA/Q3W/2022-23: 1 20/MIN/61SA/Q3W/22-23: 1

Supply & fix LED light fitting 1x 20 watt AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of three core suitable for size from ceiling rose complete as specified. Make: Crompton Cat Part LDLSRNX20 CDL or Equivalent as per Appx B. 42/MIN/61SA/Q3W/2022-23: 4 20/MIN/61SA/Q3W/22-23: 28

Supply & fix LED light fitting mirror type with high out put diffuser 2 feet 10 watt 220 V AC decorative type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of three core suitable for size from cceiling rose complete. Make: Havells Pride Plus Neo LHEXACP7IN1W010 10W LED or Equivalent as per Appx B. 42/MIN/61SA/Q3W/2022-23: 1 20/MIN/61SA/Q3W/22-23: 2

S & F in stepped type electronics fan regulator flush type AC 230 volts single pole (ISI marked) for AC 230V, 50 Hz on laminated sheet complete all as specified 20/MIN/61SA/Q3W/22-23: 4

Suppy & fix in repair LED street light fitting 35 watt 230 volt outdoor type with pressure die carst iron and heating restant complete with lamp bracket with impact and corrosion resistance including thermal management in multiple optic complete with IP/65 with three core copper connection from ceiling rose to fitting. 20/MIN/61SA/Q3W/22-23: 5

MSR INFRATECH