ADDN/ALTN AND SPECIAL REPAIR TO SHIPS GALLEY INS TANAJI ,MANKHURD,MUMBAI,PROVN OF HARD STANDING WITH HEAVY DUTY OUTDOOR TILES NEAR BUREAU STAGE AT CABS,MANKHURD,MUMBAI AND CONSTRUCTION OF RAMP FOR FIRE TENDER, REPAIR OF STATIC TANK PLINTH AREA AND FI

Amount

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed.

Demolition of concrete of any description and in any thickness (reinforcement) below or above ground level.

Demolition cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level).

Dismantling of brick work /stone boulders built in cement mortar including all quins, arches, pillars etc complete all as specified and as directed.

M&L for 15 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing surfaces even and smooth complete all as specified and directed

M& L rendering 10 mm thick ready mix plaster ceiling surface finished even & smooth with sagol finish complete all as specified.

Supply only integral water proofing compound

Chipping, removing carefully loose/damaged concrete incl plastering (total thickness upto 60mm ) from RCC surfaces of columns, beams,Chajas, soffits of slabs etc by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land, complete all as specified and directed. Note: Hard concrete shall not be removed by force.

M&L for cleaning existing reinforcement by sand blasting with suitable pump as directed by the GE and wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

M&L for Anticorrosive Treatment to Reinforcement using Corroseal - ZR of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed . Note:- Mode of measurement: superficial area of concrete will be measured.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 20mm thickness including levelling, profiling etc complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Monolith-PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 40mm thickness including levelling, profiling etc in two layers, each layer not exceeding 20mm, complete all as specified and directed.

M&L for reinforced cement concrete (Design mix) in M-25 (using 20mm graded aggregate) for beams, lintels over 1.5m span complete all as specified and directed.

Use waste of formwork to edge of conceret flat,treat break in floors,window cills, concrete railling, opening in conceret wall ,floor and roof n.exc 20cm wide and side of RCC bands in walls, horizontal or sloping and similar work exc 10 cm and n exc 20 cm wide fair finished surfaces. and complete all as specified and directed

M&L for TMT steel bars 10mm dia and over, cut to lenth,bent to shape required,including cranking bending spirally for hooping for columns,hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per Item No 16 above but 5mm dia and over upto including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for prepration of newly plaster/concrete surface of wall and applying two coat of distemper oil emulsion on walls with one coat of primer ( chalk white on plastered surfaces) and applying complete all as specified and directed

M& L for preparation of newly plastered surface of Ceiling and applying Three coat of white wash complete all as specified and directed

M& L for preparation of old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed

M& L for complete removal of existing treatment on surfaces of walls and applying two coats of oil bound distemper over 3 mm thick wall care putty applying on walls for smooth finish complete all as specified & directed by EI C.

M&L 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded aggregate) as in sub base of flooring finishing cement concrete surface even and smooth using extra cement complete all as specified and as directed

Demolition of stone slabs and tiles laid beded and pointed in any mortar of any description or thicknes in floors , aprons etc

M&L pre polished Machine cut kota stone slab flooring20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over screed bed or bedding layer of morar 20 mm in cement mortar 1:6 complete all as specified and as directed.

M&L for coloured glazed ceramic tiles 300x200x6 to 7mm thick set and jointed in neat cement slurry and pointed with coloured cement as in skirting/dados including 10mm thick rendering in CM 1:4 as in backing coats of tiles finished the surfaces rough to receive tiles etc complete all as directed and specified.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete including 15 mm thick CM 1:6 screed bed for laying floor finishes all as specifed and directed..

M & L for Machine cut cudappah stoneslab 18-20mm thick over cementscreed base, laid and mixedwith pigment to match the shade of the slab window cills and jambs to full thickness of wall fixed in steps over cement screed bed 10mm thick in CM 1:4 and jointed with grey cement paste and slurry including rubbing and polishing complete all as specified and directed

Taking up or down steel water tubing and connections of size 15mm bore, complete all as specified and directed.

Supply and fixing of 20 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (including provision of special fittings i.e. brass elbow, brass tee, Male brass threaded adaptor, female brass threaded adaptor etc required for fixing of bib tap, stop valve with CPVC pipes) concealed in walls/ ceiling or laying in floors etc., also including cutting chases, grooves and making good the same in CM 1:3 after fixing of pipes / fittings, complete all as specified and directed.

S&F in repairs cast iron Nahani trap 100mm dia out let including grating connecting jointing to waste pipe with lead jointing and taking out existing unserviceable traps by hacking out concrete joints and making good of surfaces complete all as specified and as directed .

S&F in repairs bib taps, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated.

S&F in repairs angular concealed stopcock with wall flange fitted by 15mm bore complete all as specified and as directed

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bedding layer in CM 1:4. is approved by GE

Taking down existing aluminium joinery of any description (frame/ shutters) with all fittings (but excluding grills) complete all as specified and directed.

S&F standard aluminium section powder coated (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE ) as in frame, shutters for doors, window / ventilators, fixed / openable / sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco) Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of other items / accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However glass panes, shall be measured and paid separately as supply only under respective item.

Supply only 4.80mm thick glass ordinary quality plain not exc 0.5 Sqm each pane with including wooden/rubber beading or gasket for aluminium section complete all as specified.

Supply 12 mm thick prelaminated particle, board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to aluminium frame work complete all as specified.

S&F aluminium anodised Grills of approved design for window / ventilators and fixing with F/U channel including drilling as required in RCC sections in rectangular or architectual type balcony opening in existing building, complete all as specified and directed. Note: The Grills shall be of Model DG-100/DG-102 of Make Deco or equivalent make as approved by the GE.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 - S, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete.

M&L Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members Wt of Jali Exc 4.0 kg/sqm

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and as directed

M&L Plain Cement concrete 1:3:6 type C-1, using 20 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L reinforced concrete pipes, class NP - 2, 250 mm bore, laid and jointed complete with collars Complete all as specified and directed.

Cutting into existing manhole,225 mm bore pipe, for connecting new drains making good to pipe and removing cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregates, smooth finish and re-forming benching complete all as specified and as directed

S & F for precast Heavy duty rectangular manhole cover of size 750X450mm mm dia fixed in position with frame work and necessary cement work complete including taking down old one complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and as directed.

S&F in repairs PTMT grating doom 125mm dia of size

M & L for 10 mm thick plaster in cement and sand mortar (1:3) finished even and smooth without using extra cement mixed with WPC over roof/ terrace surfaces, complete all as specified and directed. Note: WPC shall be measured and paid separately as "supply only".

M & L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/ Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20C. (x) Dimentional stability % change = Maximum 1%. (d) Over the membrane provided a finishing with solar reflective bitumen aluminium paint @ 0.10 Kg/ Sqm as prescribed by manufacturer.

M&L Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:6 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling Asbestos cement (corrugated, semi corrugated, etc sheets in roof coverings complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 gde E

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Surface dressing n.exc 15cm deep and getting out in soft and loose soil.

M&L for approved Moorum brought from outside MD land by spreding in s, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering and surface formed rolling with power roller exc 8 tonne and not exc 12 tonne and finished to required level/grade etc complete complete all as specified and directed

M&L for broken stone or boulders hardcore of guase n.exc 63 mm depositing, spread and levelled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces all as specified and directed

M&L 40MM thick Rough dressed sand stone slab flooring, laid dry but jointed and pointed in cement mortar 1:3 over screed bed or bedding layer of morar 20 mm in cement mortar 1:6 , (design and colour os stone as per direction given by GE) complete all as specified and as directed

M&L for PCC 1:2:4 type B1 using 20mm graded agg as in coping all as specified and directed.

Removing and disposing off the excavated material/soil out side MD Land, complete all as specified and directed. Note: For payment pirposes, quantity of excavation after deduction of the quantity of returning filling, shall only be payable under this item.

M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundations,filling and mass concrete complete all as specified and directed.

M&L for PCC block masonary with solid blocks grade C (5.0) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:6) on brick/concrete surfaces of walls, finished even & smooth surfaces without using extra cement complete all as specified.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L Machine pressed precast concrete interlocking paver block Coloured any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade over and including 25 mm thick sand cushion complete all as specified

M&L 200 mm thick Cement concrete type B-1, 1:2:4 (using 40 mm graded aggregate) of flooring finishing cement concrete surface even and smooth using extra cement complete all as specified and as directed

M&L for factory made precast Cement Concrete (1:2:4) type B-0, using 12.50mm graded stone aggregate making rounded or chamfered on edges as required fixed in position as in kerb stone using cement mortar 1:4 including demolition of PCC,excavation and earthwork and ramming etc complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

S&F stainless steel wire cloth 0.36mm mm nominal dial of wire and average width or aperature 1.40mm for fixing to wooden door/ window shutters in any position with new beads/ steel section as required for securing including dismantling of old jalli and painting to match with existing complete all as specified and as directed.

M & L two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of previously untreated surfaces of steel and iron exc 10 cm width or girth.

Taking down copper/ aluminum point wiring surface type, concealed type/ surface, light fitting/ flame proof type (Light/Fan/Socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, socket, light fitting and flameproof fitting etc. Removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to walls floors etc complete all as specified and directed. Note-:Flame proof light fitting and switches to store for keeping in safe custody and submit to MES store.

Taking down of Old MCB DB of any size complete all as specified and directed.

M & L for concealed point wiring with PVC insulated unsheathed 1100 Volts grade single core multistranded copper conductor cable 1.5 Sqmm drawn in and including PVC conduit not less than 20mm dia and accessories , fixed on wall / ceiling etc with necessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 1.6 mm thick pressed steel terminal boxes concealed in wall covered with laminated sheet top cover 3 mm thick for mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws all as specified for one light / fan / bell point controlled by one switch. Make of conduit-: Sudhakar/Precision/ Diamond, Make of wire-: Finolex/ Havells/ Polycab/ KEI

-Ditto- all as per item No 75 above but for one 5A 2pin/3pin socket out let multipurpose on the same board with other switches.

-Ditto- all as per item No 75 above but for one 5A 2pin/3pin switch socket out let multipurpose on independent Board.

All as per item No. 75 above but wiring complete for power pointwith 4 Sqmm for 3 pin 15A socket multipurpose on independent board

S & F in repair switch Piano, flush type, single pole, one way, 5 Amps, 230 Volts Make: Anchor/ Leader/ Maru

S & F in repair switch socket combination 2 in 1, 5 Amps, 5 pin multipurpose, flush type, 230 Volts Make: Anchor/ Leader/ Maru

S & F in repair switch socket combination 2 in 1, 3 pin, 5 and 15 Amps, flush type, 230 Volts Make: Anchor/ Leader/ Maru

S & F in repair ceiling rose, surface bakelite, three terminals, AC, 230 Volts Make: Anchor/ Leader/ Maru

S & F in repair ceiling fan regulator electronic stepped type, AC, 230 Volts, flush type Make: Anchor/ Leader/ Maru

Taking down old unserviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 2.0 mfd - 01 No., PVC canopy - 02 No and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site with new clamps, nuts, washers, safety wire of size not less than 1.00mm & bolts including cotter pin for complete all as directed.

Supply and fixing in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light (Rod) including provision of three core flexible copper conductor cable of suitable size from ceiling rose and PVC square blocks complete all as specified and directed by Engr-in-Charge. Make : Bajaj/Crompton/wipro/Jaquar

Supply & fix Heavy duty Metallic body Exhaust fan of sweep 450 mm with frames, blades including provision of mounting anchor fasterners aluminium louvers made of aluminium sheet of 0.5 mm thickness provision of three core 1.5 sqmm copper cable rom ceiling rose to fan , making opening of requird size in cement mortar brick wall/RCC for fixing of exhaust fan, making good the distrubed surfaces in CM 1:4 including scafolding if any required to carry out the work in building of height up to 20 Meters complete. Make-: Almonard/ Orient

Taking down old unserviceable exhaust fan 300 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs for rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 2.5 mfd - 01 No and bearing including scrapping of old paint and applying two coats of synthetic enamelled grey paint over a coat of red oxide primer complete and refixing back at site complete all as directed.

-Ditto- all as per item No 87 above but for 450 mm sweep with capacitor 3.15 mfd complete all as specfied and directed.

S&F single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts complete all as specified including concealing in wall and directed. Make-: Indo Asian/ Schneider/ C &S

S&F Triple pole and neutral enclosure with a three pin and earth and metal clad plug socket complete with one TP MCB 32 Amp 415 Volts complete all as specified including concealing in wall and directed. Make-: Indo Asian/ Schneider/ C &S

S&F Triple pole and neutral enclosure with a three pin and earth and metal clad plug socket complete with one TP MCB 63 Amp 415 Volts complete all as specified including concealing in wall and directed. Make-: Indo Asian/ Schneider/ C &S

Supply and Laying or fixing or passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 50 Sqmm 3.5 core including necessary connection and providing cable lugs as required including disconnection/taking down of existing cable all as specified.Make-: Universal/ Gloster/ Havells/ KEI

M&L for sub main wiring with three single core 10.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 10.0 Sqmm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed Make of casing caping-: Sudhakar/Precision/ Diamond, Make of wire-: Finolex/ Havells/ Polycab/ KEI Note : 1. Three runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.

M&L for sub main wiring with two single core 6.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 4.0 Sqmm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed Make of casing caping-: Sudhakar/Precision/ Diamond, Make of wire-: Finolex/ Havells/ Polycab/ KEI Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.

-Ditto- all as per item No 94 above but for 4.0 sqmm complete all as specfied and directed.Make of casing caping-: Sudhakar/Precision/ Diamond, Make of wire-: Finolex/ Havells/ Polycab/ KEI

S & F in repair MCCB DB TPN 4 way, double door, vertical type, IP - 43 suitable for Triple pole 100A MCCB including connecting up with cable, lugs, Bus bar, Din rail , Neutral link etc complete all as specified.Make-: Schneider/ L&T/ Legrand/ ABB/ Havells

S & F in replacement MCB DB 8 way SPN, double door, vertical type, IP - 43 with 200 Amps rated bus bar, AC and connecting up complete all as specified.Make-: Schneider/ L&T/ Legrand/ ABB/ Havells

S & F MCB SP 5 to 32 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity 'C' series.Make-: Schneider/ L&T/ Legrand/ ABB/ Havells

S & F MCB SPN 40 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity 'C' series.Make-: Schneider/ L&T/ Legrand/ ABB/ Havells

S & F MCB TPN up to 32 Amps, 415 Volts, 50 Hz, 16 KA Breaking capacity 'C' series.Make-: Schneider/ L&T/ Legrand/ ABB/ Havells

S & F MCCB TPN 100 Amps, 415 Volts, 50 Hz, 16 KA Breaking capacity 'C' series.Make-: Schneider/ L&T/ Legrand/ ABB/ Havells

Supply and fixing in replacement of LED security light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as per directed by Engr- in – charge. Make : Bajaj/Crompton/wipro/Jaquar

M & L taking down and refixing of LT Panel and rewiring of old burnt out copper wiring in LT Panels/LT feeder, replacing of cable Glands, cable lugs, bus bar link, connectors, insulators, door hinges, panel door locks & scrapping of old paints & spray painting inside and outside applying two coat of synthetic enameled paint of superior quality and approved colour after preparation of steel surface all as specified and directed.

M & L for Cutting holes into or through brick walls built in cement mortar for fixing the fan and making good the distrubed surfaces in cement mortar 1:3 complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode 600x 600x 3 mm buried directly in ground with top edge of the plate not less than 1.5 mtrs below normal gound level and connected to earth test point by means of GI Strip of size 32x6 mm all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 including earthwork, PCC chamber, CI cover, protection and watering pipe, funnel, mesh etc all as required at site and all as directed. Note: (1) 7.5 RM GI strip in deemed to be included in quoted rates beyond 7.5 RM strip shall be measured and paid separately (2) Rate quoted by the tenderer is deemed to include salt & Charcoal upto & above 450 mm top of GI earth plate.

Taking down and refixing of Fire fighting and alarm cable of any size with connected items including testing all as specified and directed.

Supply and fix UPVC cable trunking of size 100mm x 100mm including spacers, screws, saddles for fixing thetrunking in wall.

Taking down carefully from existing position and undertaking of water servicing to both outdoor and indoor unit, cleaning of cooling coils, outdoor fan blades, tightning of doors terminations, wires etc and refixing back in old loaction of split type 1.5 TR/ 2.0 TR air conditioners complete all as specified and directed.

Supply & fixing copper piping with foam insulation suitable for supply and return air for split type AC of capacity 1.5/ 2.0 TR having following size 1/4" complete

Supply & fixing copper piping with foam insulation suitable for supply and return air for split type AC of capacity 1.5/ 2.0 TR having following size 3/8" complete Note : A sum of Rs 21,265.00 towards sch of credit shall be deducted to arrive the contract sum.

AM ENTERPRISES

Vishal Builders

mp construction co

M/S KHUSHI ENTERPRISES

Joy builders

M/s Mohd Altaf Hanif Qureshi