REAPIR/REPLACEMENT LEAKAGE SEEPAGE AT OFFICE COMPLEX , DSC LINE, DSC QUATERS, SERVICE OFFICERS MESS AND KPR OF SQAE(A) KANPUR.

Amount

Demolition of cement concrete as in ground floors and pavings not exceeding 15 cm thick below or above ground level (unreinforced).

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water all as specified.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles completed all as specified and directed by EIC

M&L for Brick work with sub-class “B” bricks straight or curved in plan exceeding 6mtr mean radius with old size bricks in cement mortar 1:6 all as specified.

Same as per item No -05 above but without bricks.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 as on brick or concrete walls surfaces. finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 as on brick walls finished the surface even and smooth w/o using any extra cement all as specified.

M&L for 10mm thick rendering in cement mortar 1:3 as on ceiling and finished even and fair without using extra cement complete all as specified and directed..

M&L for vtrified jointfree printed coloured tiles 10 mm thick (square/ rectangular) double charge area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm as in floors etc; set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile complete all as specified and directed.

M&L for vtrified jointfree printed coloured tiles 10 mm thick (square/ rectangular) double charge area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm as in skirting and vertical surfaces etc; set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed..

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade complete all as specified and directed.

M&L for 20 to 25mm thick machine cut Kota stone flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and Mirror polishing complete all as specified.

ditto - as per item no -15 above but kota stone slab 20-25mm thick in riser of steps, skirting , dados and pillar laid over cement screed and jointed.

M&L for 16 to 20mm thick Granite slab machine cut for self flooring over cement screed base laid and jointed with grey cement slurrry mixed wit pigments to match the shade of the slab including cutting rubbing and polishing complete all as specified.

M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in floors, finished even and rough to receive floor topping complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for 10 mm thick screed bed or bedding layer of cement mortar 1:4 for vertical surfaces of wall tiles complete all as specified and directed.

Dismantling textile covering in wall/ceiling including frame (if any) and cover fillets complete all as specified.

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with pigment in floor set and jointed in neat cement surrey and point in white cement to match colored tile over 20mm screed in CM 1:4.

M&L for 75mm thick in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protections/ path including necessary form work complete all as specified.

M&L for false ceiling at all heights with GRG(glass fiber reinforced gypsum ) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 25, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987. Noncombustible asper BS 476 part-4)-1970 and light refledtance of 85%(min) to br laid in true horizental level suspended on inter-locking metal T grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grms per sqm incl both sides) compressing of main - T runners of size 15x32 mm of length 3000mm,cross-T of size 15x32 mm of length 600 mm from grid mould grid mould of size 600x600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80grms per sqm) i.e 50mm long outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000m length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.4 mm of length 3000mm to be fixed on pherifery wall/partion with the help of plastic rawl plugs at 450 mm center and 40mm long dry wall ss screws. The work shall be carried out as per specification and direction of EIC.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not 1.5 Sqm each complte all as specified and directed.

All as per item No. 25 here in before but exceeding 1.5 Sqm but not exceeding 4 Sqm each.

Taking down shutters only area exc,1 Sqm but not exc, 2 Sqm each all as specified.

M&L in repair of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminimum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S&F in repair door closer hydraulically regulated designation No 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 Kg and fixed.

S&F solid U pvc frame (single rebated of size 100x30mm made out of solid u pvc foam with homogenous fine cellular structure having smooth outer integral skin with suitable skin with suitable metal stiffner and fixed with 100x 8 sheet metal CSK screws complete all as specified and as shown on drawing as per specification & drawing complete all as specified and directed.

M&L for factory made solid U pvc profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminated on bothsides of approved colour as in fill with C type GI or 40x20x19 of ms pipe as in stiffner & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F of 100 mm size PVC butt hinges of Make: Prayag or equivalent complete all as specified and directed.

S&F of 150 mm size PVC handle of Make: Prayag or equivalent complete all as specified and directed.

S&F of 150 mm size PVC tower bolt of Make: Prayag or equivalent complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or PVC pipes )

S&F in of PVC (SWR) pipes ,single socketed in any length with rubber rings 75mm dia.

S&F in of PVC (SWR) pipes ,single socketd, in any length with rubber rings 110mm dia.

S& F pressed seel frames size125x60mm for doors with one or more rebates including necessaey fixing lugs, hinges, lock strike plate, etc., incl pcc 1;2:4 filled in hallow portion complete, as specified, supplied and fixed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type , both face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed.

S&F for 35 mm thick second class hardwood, glazed and skeleton shutter, open rebated and prepare to received glass, gauge etc (with sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc; size of member of shutter as specified in SSR Part-I Section 8 clause 8.24 (b) and fixed to chowkhats complete all as specified and directed.

M&L 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. complete all as specified and directed.

S&F of 300 mm long aluminium anodised sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F of 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F of 200 mm long barrel tower bolt aluminium anodised of extruded section and fixed complete all as specified and directed.

S&F for stainless steel wire cloth of 0.36 mm dia of wireand average width of aperture 1.40mmfixed with stainless wire staple complete all as specified and directed.

S&F in repairs stainless steel wire cloth of 0.36 mm dia of wireand average width of aperture 1.40mmfixed with stainless wire staple complete all as specified and directed.

S&F of 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs continuous (piano) hinges, mild steel, bright finish or electro galvanised with 40 mm width flaps when open complete all as specified and directed.

S&F of steel windows with side hung shutter including box type hinges with steel handle and steel peg stay with glazing bars, dovetailed or welded complete all as specified and directed.

All as per above item no 52 above in before but without glazing bars.

S&F of steel ventilators with partly glazed and partly gauged complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F of 3 mm thick sheet glass, ordinary quality and glazing with putty or fixed with beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

All as per item No. 56 above in before but frosted / pin headed glass.

S&F of mild steel work as in holdfasts, clamps, stays and similar small articles including nuts and bolts complete all as specified and directed.

Dismantling of water storage tank and removing to store of capacity exc. 250 ltrs but n. exc. 500 ltrs complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm bore complete all as specified and directed.

All as per item no-60 above in before but of 20 mm bore.

Re-fixing old steel tubing and connections in new or old position (wall, ceiling and floor etc) of 15 mm bore including cleaning old tubing complete all as specified and directed.

All as per item no-62 above in before but of 20 mm bore.

S&F of 15 mm bore steel tubing, medium grade, galvanised with all fitting, fixed to walls and ceiling or laid in floor complete all as specified and directed.

All as per item no-64 above in before but of 20 mm bore.

S&F of 20 mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in 20 mm bore ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed (min wt-210 gram) complete all as specified and directed.

S&F of 500 ltrs capacity triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Pt –I complete all as specified and directed.

Supply and fixed in repairs vitreous china squatting pan Orissa pattern of size 550x400mm including integral foot rest fixed in position complete all as specified.

Supply and fixed in repairs vitreous china EWC padestal pattern closet with White seat & cover with flat bottom with hanging device complete all as specified and directed.

Supply and fixed in repairs wash basin (550X400mm) vitreous china including cutting for holes pinning in ends of brackets for erecting stand incl waste pipe and waste coupling complete all as specified.

S&F repaires Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe)

Supply and fixed in repairs vitreous china urinal bowl flat back of size (465x355x265mm) white with grating and union for discharge pipe ( excluding flushing cistern Flush pipe and waste pipe)complete all as specified and directed.

S&F in repairs cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed.

S&F of PVC connection 600 mm long with brass coupling suitable for 15 mm dia pipe complete all as specified and directed.

S&F syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets,32mm flush pipe etc, complete all as specified.

Supply & fixed in repairs fancy type chromium plated Pillar tpas with capstan head screwed down high pressure with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed.all as specified.

S&F grating around 140mm size of PTMT (minimum wt 50 gms)

Dismantling of 75 to 100 mm dia cast iron pipes, jointed in cement mortar and fixed to wall or laid in trenches and taking out if required complete all as specified and directed.

S&F for 100 mm bore cast iron soil, waste and vent pipes, in any length with or without ears with cement joints fixed on walls with clamps complete all as specified and directed.

All as per item No. 82 above in before but laid in trenches.

S&F for 75 mm bore cast iron soil, waste and vent pipes, in any length with or without ears with cement joints fixed on walls with clamps complete all as specified and directed.

All as per item No. 84 above in before but laid in trenches.

S&F in repairs cast iron bends (any radius) diminishing pieces or tappers (larger bore measured) for 100 mm bore pipe complete all as specified and directed.

All as per item No. 86 above in before but of 75 mm bore.

S&F in repairs chromium plated shower rose& arm with or without swivel joints suitable for fixing to steel pipe of 15 mm bore complete all as specified and directed.

S&F in repairs bib taps long body, C P cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed

S&F in repairs stop valves, chromium plated, cast copper alloy, fancy type with capstan head and cup, screwed down, high pressure, screwed both end, long screwed shank for iron pipe (concealed type) of 15 mm bore complete all as specified and directed..Hindware Cat no F-100011 or equivalent in L&K ,

Demolition of reinforced cement concrete of any description and in any position all as specified.

M&L for precast cement concrete type B1:2:4 reinforced type B1 using 20mm graded stone aggregate as in stair cases lintels RCC chajjas, and sunshade etc..

M&L for Reinforced cement concrete type B1:2:4 reinforced type B-1 using 20mm graded stone aggregate as in stair cases lintels RCC chajjas, and sunshade etc..

M & L for 10mm dia TMT bars cut to length bent to shape as required including binding with mild steel annealed wire not less than 0.90mm dia all as specified.

M & L for 8mm dia TMT bars cut to length bent to shape as required including binding with mild steel annealed wire not less than 0.90mm dia all as specified.

Use & waste for formwork to sides and soffits of shelves, shelves, suspended slab, chajjas including support, overhanging etc. for rough finished surfaces of concrete flat complete all as specified and directed.

S&F of mild steel work as in grills, gratings etc. such as window guard bar, angle iron in door frames, barred iron door and similar work etc; confirming to Fe-290 Gde E-165 including cutting and welding as required complete all as specified and directed.

S&F floor door stopper of aluminium alloy long anodized with hard drawn steel spring fixed length of cover plate 15 cm long all as spd

S&F in repairs 25 mm dia cp steel conduit as in curtain rod and fixed to brackets complete all as specified and directed.

S&F in repairs fancy type brass cp bracket & side knobs suitable for 25mm dia curtain rod and fixed to walls with screws complete all as specified and directed.

M&L in repairs for wall mixer 3-in-1 system with both hand and over head shower with 115mm long bend pipe, connecting legs to wall ,flang, o ring etc complete. Makr Jaquar FUS-29281

M&L in repairs for sensotronic sensor faucet for wash basin Make Jaquar cat no SNR-CHR-51021.

M&L in repairs for single lever extended basin mixer (ht 85 mm ) with out popup waste system with 450 mm long braided house Make Jaquar cat no FUS-29023B.

M&L in repairs for waste coupling 32 mm size half threaded with 80 mm height Make Jaquar cat no ALD- CHR-709

M&L in repairs for bottle trap with fully casted body(with internal partition)32 mm with 190mm & 125 mm long connecting pipes & wall flange Make JaquarALE-ESS-773AL 190x125.

S&F in repairs of single towel rail 600 mm long Cat no ACH-CHR-1111N Make Jaquar.

M&L in repairs for corner glass shelf (with brackets)Make Jaquar cat no:CAN-CHR-1173

M&L in repairs for toilet paper holder with flap Make Jaquar cat no CAN-CHR-1153N

M&L in repairs for vitreous china white casket wall hung with normal closing seat cover& citern size 660x360x760mm P trap 110 mm fixed with all necessary fittings Jaquar cat no CNS-WHT-351N cistern Cat no CNS-WHT-201

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

M & L PCC 1 : 2 :4 Type B1 ( 20 mm graded aggregate) as in coping.

M & L two coat of oil bound distemper on new plastered surfaces of walls and chalk whiting on plaster surfaces preparator to distempering including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .

M&L preparation of old painted surfaces and applying a coats of oil bound distemper complete all as specified and directed by Engineer-in-charge.

M&L for Preparation of new plastered surfaces applying two coats of cement base paint over one coat of white wash on walls complete all as specified.

same as per item No-115 above three coat of white wash on ceiling.

M&L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described over applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer.

M & L for Preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

M&L for Preparation of new plastered surfaces applying two coats Colour wash over one coat of white wash on walls complete all as specified.

M&L for Preparation of new plastered surfaces applying three coats white wash on ceiling surfaces complete all as specified and directed.

same as per item No-120 above but one coat of white wash on ceiling.

M&L for prepration of surfaces by applying jk/birla wall care putty and rubbing &making the surface smooth by using embbray paper complete all as specifird and directed

M&L for preparation of new surfaces and applying two coats of exterior weather coat paint on walls over a coat of primer complete all as specified and directed by Engineer-in-charge.

M&L for 100mm thick PCC 1 : 2 : 4 Type B-2 ( 40 mm graded stone aggregate) as in PCC Path/ hard standing finished with rolling and spiked rolled to surfaces making impression of expanded metal all as directed.

M&L for 40mm thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in floor finished the surface even & smooth w/o using extra cement all as specified.

S&F glass dividing strips 3mm thick and 38 mm Wide complete all as specified and direceted

Demolition of existing water proofing treatment all as directed & specified and removing rubbish exc 250m and cleaned the roof surface completed all as specified and directed by EIC

M&L for plain cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) as in roof, kerbs or mud stops, benching etc; rounded or chamfered angle complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on roof slab finished top surface even and smooth with using extra cement and using 3% W.P compound by weight of cement completed all as specified and directed by EIC (W.P compound measured and paid seperately.

Supply only integral water proofing compound completed all as specified and directed by EIC

Cutting grooves in V-section in existing roof or terracing, cleaning out and grouting with cement & sand mortar 1:3, cutting depth not exc 10cm girth complete all as specified and directed.

M&L for applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having sun reflectivity index (SRI) of 105 on top of concrete roof in three coats @ 10.76 litr/Sqm one coat of self -priming of elastomeric water proofing liquid (dilution with water in the ration 3:1) and two coats of undulated elastomeric water proofing liquid ( dry film thickness of complete application system not less than 500 microns). The operation shall be carried out after scrapping and cleanning the suface to remove loose partical with wire brushes , complete i all respect as per the direction of engr-in charge. Note:- treatment shall be done through authorised applicator of manufacture.

S & F 1st class hard wood for plain,solid straight chowkats and frames ( kitchen cabinet and almirah frames) wrought ,framed rebated on the solid rounded or chamferered ,put together with glue pinned at joints complete all as specified and directed by Engr- in -charge.

Dismantling of structrual steel work of any description including doors, gates but excluding framed truss . complete all as specified and directed.

Dismantling corrugated or semi corrugated steel sheeting any thickness any gauge any pattern as in roof covering in roof all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding dorrs; fixed with angle cleats or other connecting plates conf to Fe-410-w or E -250 quality A complete all as specified and directed.

S&F pre-painted galvalum aluminium zinc coating gi based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalum aluminium zinc coating gi based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding/ridge/valley gutters , fixed with self tapping screws as specified.

M&L for 6mm thick asbestos cement corrugated or semi corrugated sheets as in roof covering fixed with L or J hooks or cranked bolts all as specified.

M&L for 6mm thick serrated or unserrated ridge for corrugated or semi–corrugated sheets as in roof coverings fixed with’ L’ hooks or ’ J‘ bolts complete all as spd.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar internal dia of pipe 150mm.

Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 meter in depth and getting out in soft/loose soil complete all as soecified and directed.

Material & Labour for concrete bed for drain pipes in PCC (1:4:8) Type D-2 including packing under and haunching against the sides of pipes after they are laid & tested for 150mm bore of pipe.

M&L for 150mm bore Reinforced concrete pipes class NP2 laid in jointed complete with collars laid in trenches & jointed complete all as specified.

Removing excavated material to a distance n.exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Cutting into existing man holes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ Section) in cement concrete 1:2:4 type B-I smooth finished and reforming benching as required internal dia of pipe 150mm.

M & L PCC (1:4:8) type D-2 using40mm graded stone aggregate in foundation/filling and mass concrete.

M&L for cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) as in surface channels and drains including finishing cement concrete surface even and smooth without using extra cement.

Banarsi Lal Ahuja