SPECIAL REPAIRS TO BLDG NO T-56/1 TO 3 AND T-57/1 TO 3 (MH AREA) OR MD ACCN AT NAMKUM (TOTAL 06 QTRS) UNDER GE RANCHI

Amount

Dismantling AC/ CGI( corrugated, semicorrugated,etc), as in roof covering complete.

Dismantling of timber scantling 40 Sqcm and over in section in any position complete.

M&L clean sawn second class hard wood in scantlings, purlin, etc fixed complete, all as specified and directed.

M&L for MS flat (wind tie) as roof sheet securing incl distance pieces, cleats etc, complete all as specified & directed.

M&L roof trusses (framed ), trussed, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats , holdfast etc complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja, etc fixed with self tapping screws, complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge, etc with self tapping screws or J hooks, complete all as specified & directed.

Roughening surface of old concrete floor by picking sweeping cleaning and washing down with water to remove dust etc, complete all as specified & directed.

M&L brushing neat cement slurry @ 3.0 kg of cement per sqm,complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete.

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over and incl 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match, complete all as specified & directed.

M&L coloured Glazed ceramic tiles 350x250x7mm /450X 350X 7 mm thick as in wall surface over and incl 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement, complete all as specified & directed.

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in, skirting, dado, etc over and incl 10mm thick rendering in CM 1:3, set & jointed in neat cement slurry and pointed with white or coloured cement to match, complete all as specified & directed.

M&L Cement concrete 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete all as specified & directed.

Demoliton of cement concrete in ground floor paving n exc 15cm thickness ( below or above ground level ) complete.

M&L 75mm thick PCC 1:3:6 type C-2 using 20mm graded aggregate as in plinth protection finishing even & smooth without using extra cement laid in bays with construction, complete all as specified & directed.

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete.

Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6, complete all as specified & directed.

M&L 15 mm thick rendering in two layers (10mm & 5mm ) on fair faces of bk / concrete surfaces in cm (1:4) with WPC (WPC measured & paid separetely) finished even and smooth (Without using extra cement ) complete, complete all as specified & directed.

M&L 15mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and smooth (Without using extra cement) complete.

Supply only water proofing compound (liquid).

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc, complete all as speicfied and directed.

Demolition of cement concrete reinforced as in chullah hoods, shelves and plate form etc, complete all as specified and directed

M&L for RCC as in kitchen platform, shelves,cover slab type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified and directed.

S&F mild steel deformed bars 8 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc, complete all as specified and directed.

M&L marble work of any shade 16 to 18mm thick in cooking platform, steps, windowcills, etc over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab incl rounding of slab & demolition of old slab where directed complete.

Taking up or steel tubing & connections including cleaning for refixing bore of pipe 15mm etc, complete all as specified and directed.

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore etc, complete all as specified and directed.

Refixing old galvanised steel tubes & connections on wall 15 mm bore, complete all as specified and directed.

S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by the EIC .

S&F in repairs stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed both ends for or iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repairs pillar tap cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc, complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete.

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling.

S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag).

S&F CP towel rail, 20mm dia, D type, 60cm long, complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete ISI marked.

S&F 32mm bore waste coupling of PTMT (half or full threaded) (Min wt 45 gms), complete all as specified and directed.

S&F in repair 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm, complete all as specified and directed.

S&F in repair 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I.

S&F PVC ball valve 20mm dia with epoxy coateed aluminium rod and high density ball (minium weight 210 gms), complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers, waste coupling, waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm, complete all as specified and directed.

S&F in repair 0.63mm thick kitchen plate Rack made of stainless steel 600x750x220mm size fixing with wooden plug with suitable size of screws, complete all as specified and directed.

S&F harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers, etc, complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each

All as per Item No 48 but exc1.5 sqm but n.exc. 4 sqm.

Taking down shutters of any description exc 1 sqm & not exc 2 sqm each

Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening, complete all as specified and directed..

S&F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with guesset plates complete doors etc to be prepared to hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing, complete all as specified and directed..

S&F steel windows with side hung shutters incl projecting type hinges with one no MS flat iron 25x3 mm of appx 200mm length and two nos MS Tower bolt 150mm long on each leaf complete with glazing bars, dovetailed or welded, complete all as specified and directed.

All as per Item No 54 but without glazing bars, complete all as specified and directed.

S&F framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0.

S&F 35mm thick 2nd class hardwood glazed and skeleton shutters of 8 panels, divided into squares with plain, chamfered or rounded, mitred & rebated sash bars and prepared to receive glass, gauze etc edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for doors, etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (b). Sample of shutter can be seen in GE's office.

M&L cement concrete type C-1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc, complete all as specified and directed.

M&L 25 x 3 mm flat Iron as in hold fast etc, complete all as specified and directed.

S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame, complete all as specified and directed..

S&F in repair 12mm thick pre-laminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cupboard shutter, shelf, etc complete.

S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long.

S&F Aluminium anodised handles of extruded section and fixed 125 mm long.

S&F only small fitings of 2nd class hard wood such as brackets of any type, latch and hing block shape door, window stops and the like incl all necessary labours articles not exc 200 cucm each.

S & F 300 mm long mild steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed.

MS ordinary rat tail rod pattern springs 150mm, including roller and roller plate complete.

M&L 125mm long hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc, complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks etc, complete all as specified and directed..

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete.

S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane.

M&L for applying two coat of cement base paint on new wall surfaces over a coat of primer on wall etc, complete all as specified and directed.

M&L for applying two coat of cement base paint on old prepared wall surfaces over on wall etc, complete all as specified and directed.

M&L for preparation of new plastered wall surface applying one or more coat of "Birla White wall care putty"or" JK Wall Care Putty "to make the entire surface free from undulations all as specified and directed.

M&L two coat of wall care putty on surface (JK WALL PUTTY OR BIRLA WALL PUTTY) incl preparation of surfaces to making the surface to receive,finishes including complete scraping of existing treatment.

M&L two coats of oil bound distemper on newly prepared puttied surfaces, complete all as specified and directed..

M&L for complete removal of existing treatment with two coats of oil bound distemper on prepared surfaces in ceiling, complete all as specified and directed..

M&L one coat of white wash on newly prepared surfaces on wall, etc, complete all as specified and directed.

M&L preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint), any colour as directed.

M&L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer, complete all as specified and directed.

M&L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer, complete all as specified and directed.

M&L preparation of old steel surfaces any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joint laid in trenches, complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall, complete all as specified and directed.

S&F PVC(SWR) 110 mm bends any radius.

S&F PVC (SWR) vent cowl 110mm bore

Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixure such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface, complete all as specified and directed.

Taking down Aluminium sub main wiring including GI earth wire and making good disturbed surfaces to match with the existing surface roof/wall/floor, complete all as specified and as directed.

M&L for sub main wiring with two single core FR 6 Sqmm copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including FR 6 Sqmm PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified.( Note :- Three runs of 6 sqmm copper conductor shall be measured as one unit length. ie Phase, Neutral, Earth).

M&L point wiring with FR 1.5 Sqmm multi strand PVC insulated and unsheathed copper conductor cable in and including surface caping and casing complete with 1.60mm thick pressed steel concealed terminal boxes and with top cover 2.80mm thick ISI marked plastic laminated hylum sheet of reqd colour fixed with brass screws and cup washers , painting terminal boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including FRLS1.5 Sqmm PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for following. Note : (I) All wiring cable shall be multi sttranded FR copper conductor of approved made duly appropedby accepting officer before incorporting. (II) Colour Code as per IS to be follow for wiring. (III) Same size of conducor use in any type of wiring(Phase/nutral/earth conductor shoud be same size.

One light/fan/bell/exhaust fan point controlled by one switch.

One 5 pin 5 Amp switch socket out let point on same board.

All as per Item No 93 but for one 5 Amp 5 Pin switch socket out let independent with 2.5 Sqmm FR (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified and directed.

All as per Item No 93 but for one 15 Amp 6 Pin switch socket out let independent with 4 Sqmm FR (Nominal Area) PVC unsheathed copper conductor single core multistranded, complete all as specified and directed.

S&F sheet metal enclosure for double door DBs for using MCBs single pole and neutral 8 way with 200 Amps rated busbar 240 Volt, complete all as specified and directed.

S&F Isolator doble pole 40 Amp 240 volt.

S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed .

S&F switch piano flush type 5 Amp single pole one way.

S&F Switch socket combinations flush 5 Amp 5 Pin complete.

S&F switch socket combination out let 6 Pin 2 in 1, 5/15 Amp flush type 240 Volt complete.

Supply and fixing socket out let 2 in 1, 3 pin, 5 Amp flush type

S&F ceiling rose surface bakelite 65x50mm three terminal AC 230 volts, complete all as specified and directed.

S&F of flexible wire twin core copper conductor of size 23/.0076 for flourescent tube light fitting/ fan up to 1.00 mtr, complete all as specified and directed

S&F Electronic regulator step type 450 watt 230 Volt 50 C/S.

Taking down the existing ceiling fan and Refixing the same, complete all as specified and directed.

S&F in replacement LED fluorescent Tube Light fitting 1x18 W energy efficient. box type poxy powder coated CRCA sheet housing with reflector cover Chanel, without electronic ballast, Bipin Holder, connector Block, etc complete LED tube rod & excluding connecting up with twin core twisted flexible copper conductor cable of suitable size all as directed. Cat part No-HLPLEDT8PC18(CW). Make-HPL/Bajaj/Philips.

Supply and fixing bell push flush type AC 230 Volt.

Supply and fixing call bell ding-dong type AC 230 Volt.

S&F LED Mirror Light.

S&F angle holder with LED Lamp 9 Watt, complete all as specified & directed.

M&L Earthing complete with galvanized GI earth plate electrode of size 600 x 600 x 6.00 mm ,buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level)with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts ,nuts ,check nuts of galvanized iron or steel including excavation and earth work in any type of soil, charcoal salt filling 15 cm around the earth plate as shown in electrical plate no 3 of SSR part-I 2004, 20 mm bore, GI watering pipe medium grade 1.50 mtr long & GI protection pipe light grade 15 mm dia from earth pit to main board including making pit with PCC 1:3:6 type C1 and pre cast RCC cover 40 mm thick, reinforced with 8mm dia deformed bars @ 100 mm c/c both ways with lifting handles and funnel etc including testing, complete all as speicified and directed.

S&L or fixing or passing through pipe 1100 volts grade heavy duty cable with insulated aluminium conductor served with an inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 myr apart including 4 mm suspension wire area 10 Sq mm 2 Core.

Balaji Construction And Company

BUILDCON ENTERPRISES

M/S mahabirsahu

BHARATI ENTERPRISES

Bihar traders

M/S ABDHESH CONSTRUCTION

M/S Manoj Kumar Sinha