RATE CONTRACTS FOR CIVIL MAINTENANCE WORK AND PAINTING WORKS FOR A PERIOD OF 2 YEARS

BoQ_Ver3.0

Total Amount Without Charges in INR

Total Amout of Group-1 (For More information kindly Refer Sheet: GROUP-I)

Do you want to quote for this sheet ?

Name of the Bidder/ Bidding Firm / Company :

Providing Fixing CPVC Tee 21/2”

NUMBER #

Providing Fixing CPVC Elbow 11/4”

service charge in INR

Providing C4 : C11 ace to prepare the surface even and smooth complete.

Providing and applying of One coat of water thinnable cement primer of approved brand and manufacture on wall surface. The primer shall be applied only on the new plaster of paris putty (POP) surface for providing the even and smooth surface complete in all respect.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

Painting with aluminium paint of approved brand and manufacture to given an even shade : One or more coats on old work.

French spirit polishing : One or more coats on old work.

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @2.20 kg/10 sqm) over priming coat of primer applied @0.80 litrs/10 sqm complete including cost of Priming coat.

Finishing walls with Acrylic Smooth cement paint of required shade : Old work (one or more coats applied @2.20 kg/10 sqm) over priming coat of primer applied @0.80 litrs/10 sqm complete including cost of Priming coat.

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.

Total Amout of GROUP-II PART-A (For More information kindly Refer Sheet- GROUP-II PART-A)

GST Amount in INR

Total Amout of GROUP-II PART-A (For More information kindly Refer Sheet- GROUP-II PART-A)

Total Amount including all Charges and all Taxes

ation 7.5 in superstructure above plinth level up to any heights : Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.: Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.: Granite stone slab of colour black, Cherry/Ruby red

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.: Granite stone slab of all colour and texture except black, Cherry/ Ruby red

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.: Marble work

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.: Granite work

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete : 12 mm thick

Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete : 18 mm thick

Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 18 mm to 25 mm thick

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).: 25 mm thick

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra if wooden louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured).

Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

Providing and fixing Teak veneering 1mm .

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :Kiln seasoned and chemically treated hollock wood (size 50x12 mm to 50x20 mm)

Providing and fixing SS curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with SS screws and PVC sleeves etc., wherever necessary complete : dia 20 mm to 25 mm

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100X58X1.90 mm

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 75x47x1.80 mm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25 mm, fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge.

Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood.: 50x50 mm (base and height)

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. : Triple strip vertical type

Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pre

or different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: (a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge. (c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.: 300 mm to 450 mm Finished Floor Height (FFH)

Renewing the FS800H Grade Flooring Panel (Size 600 mm x600 mm x32 mm) as per existing false flooring

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.: 1.00 mm thick with zinc coating not less than 275 gm/m²

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.: 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) or flat as specified

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.: GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of si

P.V.C. waste fittings complete.: 32 mm dia

Providing and fixing Toilet paper holder : C.P. brass

Providing and fixing PTMT Bottle Trap for Wash basin and sink.: Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms

Providing and fixing white vitreous china extended Wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.: 50 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.: 15 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.: 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.: 25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.: 32 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.: 40 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.: 15 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.: 65 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.: 100 mm nominal dia Pipes

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.: 15 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.: 20 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.:25 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.: 32 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.: 50 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length (15 mm nominal bore)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931- 15mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT bib cock of approved quality and colour.: 15mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion [Powder coated aluminium (minimum thickness of powder coating 50 micron)]

Providing and fixing aluminium work for doors, windows, ventilato

lue free click joint to secure long lasting joints. The Top Surface having Wood veneers in thickness of 2mm -4mm on specially developed high-density plank of sizes 1150mm-1250mm x 135-150mm.

ANTISTIC CARPET TILES - "Providing and laying antistatic carpet tiles of size 500 x 500mm of 20oz/ sq. yd (with Tac tiles ) of imported approved make , shade & sample with Optimum SD Type Nylon 6.6 Tufted Textured Loop pile, with permanent static control ,100% solution dyed , pile height 4.00mm and total thickness of 7.00mm with non - woven glasbac backing with glass reinforcement , Life time antimicrobial treatment Intercept, stain resistant treatment project 15 years warranty, CRI Green label plus certificate. complete over existing flooring as per Manufacturer' s specification.

Providing and fixing of Wooden false ceiling consisting false ceiling consisting of 12mm thick. Commercial ply & final finished with 4mm thick veneer of approved texture & finish. The ceiling will rest on wooden frame work made from kail wood of size 50mm*50mm at a distance of 450mm C/C in both directions.

Calcium Silicate Board - Providing and fixing at all height false ceiling of 12.5mm thick calcium silicate board conforming to IS: 2095 including providing and fixing of frame work made of special power pressed from MS sheet and galvanized in accordance with zinc coating of grade 350 as per IS:277 and consisting of angle cleat of size of 25 mm wide * 1.6mm thick with flanges of 22 mm and 37mm at 1200 mm center to center.

Mineral fibre acoustical - providing & fixing of mineral fiber Acoustical suspended ceiling system of size 600*600*20 mm with 15 mm wide exposed grid. The tiles should have humidity resistance (RH) of 99%, Nrc 0.70, light 0/class 1 (BS 476 part 6&7) with bio block coating on the face of the tile, suitable for Green building having of 43 mm and a load carrying capacity of 23.71 kgs/M2.

Acoustical Wall Panel Providing & fixing of Axoustical wall panels of Armstrong as per drawing & specification & approved make, sample & colour of sizes 600mm * 1200mm.

Providing and Fixing of semi glazed partition as per drawing & specifications made from frame work of pine wood of section 50X50 mm thick in both directions, at 600 mm c/c spacing. All the vertical frames shall be continuous and fixed with necessary screw, dash fasteners in the floor at bottom & sides of the wall.

Onyx Of TH 19-20 MM "Providing & fixing with machine cut and machine high pre-polished approved quality. Onyx stone of thickness 19-20mm of size not less than 1200*600mm as on drawing & specifications.

Providing and laying 40-45 mm thick Pre-polished Granite (of approved colour) DRY CLADDING with SS clamps & other accessories with Thermal breaks required to complete the job including staging, scaffolding etc. up to 10m height in patterns and profiles as specified all complete. - (a) From plinth to Floor two only.

Providing and laying 40-45 mm thick Pre-polished Antiskid Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing and fixing of 6mm thick lacquer glass of approved shade & colour & brand as per drawing & specifications with clear neutral silicon of approved make. The lacquer glass should be fixed on perfectly levelled, water proof 12mm thick plywood with necessary adhesives & is fixed to RCC surface, columns, walls, etc. with necessary hardware & stainless-steel studs (nos. as per requirement).

Fabric Panelling - Providing and fixing fabric paneling as per drawing & specifications with approved make, shade & pattern of premium quality with 6mm synthetic foam backing fixed to wall I s made up of pine with anti-termite & fire retartend paint.

Acrylic solid surface Providing & laying 10mm thick acrylic solid surface for vanity counters, facias and for similar locations of approved make , size , shape, patterns, profile, sample ,shade laid on a bed of 12-15 mm average thick cement mortar 1:3(1 cement with 3 coarse sand ) on RCC counter to make up a total thickness of 25mm excluding the thickness of RCC counter (Korean).

Providing and Fixing/Replacing old broken 20 mm thick tempered glass at Entrance Canopy including dismantling old glass as per direction of EIC.

Providing and fixing of Oval wash Basin 550 X 450 mm

Providing and fixing of CP brass twin coat hook - Jaquar/Euronics

Providing and fixing of POP false ceiling of 10 mm thick.

Supply and fixing of SS cover of floor door spring make OZONE /KANZ SUNPECH etc.

Supply and fixing of Side Rack lock of three set drawer unit.

Supply and fixing of brass latch for toilet door (inside) size 100 mm x 25 mm.

Supply of CP urinal spreader for the urinals

Supplying of JAQUAR/Euronics make CP Brass fittings as existing /approved by EIC : Basin Mixer-15mm.

Supplying of JAQUAR/Euronics make CP Brass fittings as existing /approved by EIC : Towel Ring.

Providing & fixing of S. Steel coat Hook - Double - EURONICS make.

Providing & fixing of Swing Handicap Grab bar - S.Steel - EURONICS make.

Providing & fixing of Pressure reducing valve with pressure indicator gauge at 50 mm dia CPVC water line

Providing and fixing 10 mm Polycarbonate sheet approved by EIC.

Providing & Fixing Top Rail of Glass Door With variable pivot point of 55/65mm, With clip on covers, Bolts from opposite sides make unauthorized removal virtually impossible. To accept the Pivot of OPF-1, OCPF-1 or OFS-ACC-GDP, Door held by friction grip, No need of glass preparation Gives more strength and rigidity to the door structure. SSS clip on cover and sizes in 1mtr. & 1.5mtr. (Make Ozone ODR-1)

Providing & fixing of Sensor Concealed Type Flushing Valve for Urinal complete set with installation Box with control cock (Battery Operated).

Providing & Fixing Bottom Rail of Glass Door With variable pivot point of 55/65mm, With clip on covers, Bolts from opposite sides make unauthorized removal virtually impossible. To accept the Pivot of OPF-1, OCPF-1 or OFS-ACC-GDP, Door held by friction grip, No need of glass preparation Gives more strength and rigidity to the door structure. SSS clip on cover and sizes in 1mtr. & 1.5mtr. Comes with in-built lock with a euro profile cylinder. (Make Ozone ODR-2)

Providing and fixing Glass lip seal (an adhesive seal) for frameless glass doors with a simple and quick installation system.

Provoding & Fixing Corner Patch Lock with Strike Plate OPL-1 (Make Ozone).

Providing and Fixing Glass Door Lock With Latch Bolt, Dead Bolt & Strike Plate with handle stainless Steel Grade 304 Model: OSSPL-ML-111N Standard SSS (Make Ozone)

New Added Item

Providing fixing CPVC Ball valve 2.1/2” x 2”

Providing fixing CPVC Tee 21/2” x 2”

Providing fixing CPVC Socket 21/2”

Providing fixing CPVC Elbow 21/2”

Providing fixing Brass MTA 21/2”

Providing Fixing Brass MTA 2”

Providing Fixing CPVC Union 21/2”

Providing Fixing CPVC Tee 3

Providing Fixing CPVC Tee 11/4” x 1”

Providing Fixing CPVC Tee 21/2” x 1”

Providing Fixing CPVC Tee 21/2” x 2”

Providing Fixing CPVC Elbow 2”

Total Amout of GROUP-II PART-A (For More information kindly Refer Sheet- GROUP-II PART-A)