PROVN OF CERTAIN MINOR/REVENUE WKS AND PROVN OF SHELTER FOR DIESEL PUMP AT NEW ENGINE TEST HOUSE,CERTAIN INTERNAL ELECT,PARTITION AND AIR CONDITIONING,DEEP FREEZER AND BACKUP SUPPLY OF OLD SERVER TO NEW SERVER UPS AT DIPAC AND CERTAIN UNITS UNDER GE

Amount

Section- 1

Taking down carefully existing surface/ concealed unserviceable aluminum/ copper point wiring (light, fan, socket, power or sunken box) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, etc. and making good to disturbed surfaces of walls, floors, ceilings, etc. where required and finished the existing surfaces after complete of new point wiring as specified here-in-after complete all as specified and as directed.

Taking down unserviceable sub main wiring of any type and any size including wooden batten, PVC conduit or casing caping complete all as specified and as directed.

Material and labour for point wiring with 1.5sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including PVC concealed conduit MMS (MEDIUM MECHANICAL STRESS) of dia not less than 20mm with all fittings and accessories including terminated to new pressed flush metal readily available cover with outer plates and inner plates etc, suitable for mounting modular type switches , sockets, fan regulators etc including PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi stranded copper conductor cable of size 1.5sqmm green colour as earth continuty conductor connected to common earth dolly for one light/ fan point controlled by one, one way switch complete all as specified and as directed. (Make of cable:- FINOLEX / RR KABEL/ HAVELL'S/ POLYCAB .) (Make of PVC conduit:- FINOLEX / ANCHOR/ KALINGA/ SUPREME/ POLYCAB.) {Notes:- (i) Switches and sockets to be measured and paid for separately under relevent items.}

-ditto- all as per item No. 103 above but one 5/ 6amps socket outlet point on the same board with other switches complete all as specified and as directed.

-ditto- all as per item No. 1.03 above but for one 5/6 Amps socket outlet points controlled by one, one way switch on independent board complete all as specified and as directed.

-ditto- all as per item No -1.03 above but for point wiring with 2.5 sqmm single core multi sranted copper consductor PVC insulated and unsheathed (FRLS) cable 1100 volts grade and 2.5 sqmm PVC insulated and unsheathed (FRLS) cable 1100 volts grade with multistranded copper conductor as earth wire for 15/16 Amps multi purpose socket combination controlled by one, one way switch on independent board complete all as specified and as directed.

Note for item No 1.03 to 1.06: (i) In case the wiring is encountered with any beam/column,then the wiring will run on PVC casing/caping to avoid any damage to the RCC portion. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling fan point wiring. In this specified portion wires shall run through the existing conduit or surface. (iii) Cost for cutting, chasing and making good to existing surfaces are deemed to be included in the quoted rate. (iv) Switches and sockets to be measured and paid for separately under relevent items.}

Supply and fixing in repairs of sheet metal single pole and neutral enclosure with two pin and earth plug and socket complete with and incl one single pole MCB 20 amps 240 volt complete all as specified and directed by Engr-in-Charge. (Make : Legrand / Siemens/ L&T / ABB)

Supply and fixing in repairs of modular switch one module, 5/6 Amp, one way, 230 volts AC complete all as specified and directed by Engineer-in-Charge. (Make : Anchor / Cone / Crabtree / Legrand )

Supply and fixing of modular switch one module, 15/16 Amp, one way, 230 volts AC complete all as specified and as directed by Engr-in-Charge. Make : Anchor / Cone / Crabtree / Legrand

Supply and fixing of modular socket outlet (two module) 5/6 amps, 2 in 1, 2 & 3 pin combined, 230 volts AC complete all as specified and as directed by Engr-in-Charge. (Make : Anchor / Cone / Crabtree / Legrand)

Supply and fixing of modular socket out let (two module), 2 in 1, 3 Pin suitable for 5/6 Amp and 3 Pin suitable 15/16 Amp combined, 230 volts AC complete all as specified and as directed by Engr-in-Charge. (Make : Anchor / Cone / Crabtree / Legrand)

Supply and fixing ceiling rose PVC/ polycarbonate, isolated body 63.5x23.5mm, 3 terminals complete all as specified and directed by Engr-in-Charge. (Make : Anchor/ Cona/ Havells.)

Supply and fixing of switch piano, flush type, ivory finish 5/6 Ampere single pole, one way complete, all as specified and directed by Engr-in-Charge. (Make : Anchor / Cona / Kinjal / Havells )

Supply and fixing of socket out let 2 in 1, 3 pin 5/6 Ampere 230V AC flush type complete all as specified and directed by Engr-in-Charge. (Make : Anchor / Cona /Kinjal / Havells)

Supply and fixing of switch piano, flush type, ivory finish 15/16 Ampere single pole, one way complete, all as specified and as directed by Engr-in-Charge. (Make : Anchor / Cona /Kinjal / Havells)

Supply and fixing of socket out let 2 in 1, 3 Pin suitable for 5/6 Ampere and 3 Pin suitable 15/16 Ampere flush type complete all as specified and as directed by Engr-in-Charge. (Make : Anchor / Cona / Kinjal / Havells)

Supply and fixing of stepped type 5 steps 100 watts electronic fan regulator flush type on the existing phenolic laminated sheets etc as required all as specified and as directed by Engr-in-Charge. (Make : Anchor / Havells / Usha / Crompton / Bajaj)

Supply and fixing of energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light fittings of LED 30 watts with high power LEDs as light source of IP 65 protection with 30W LED lamp with and including all accessories, internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to light fittings including taking down old unserviceable one complete all as specified and as directed. (Make Havells Model No. JETACOMPECTOFL30WLED757TG or equivalent model or cat No of make- Phillips/Crompton Greaves.)

Supply and fixing of LED ceiling light 18 watts of edgepro range of Slim-Fit low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology with and including all accessories, internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to light fittings complete all as specified and as directed.( Make:- Havells of Model No LHEWEKP7PL1W018 or equivalent model or cat No of make Philips/ Crompton Greaves).

Supplying and fixing of wall mounting fan of size 400 mm sweep noiseless metal body case, Speed 1360 RPM, Fan with built-in I.R. remote control, Performance, AC single phase 230/240 volts, 50 Hz including necessary fixing accessories and make good of surfaces including taking down old unserviceable one complete all as specified and as directed. (Make- Bajaj/ Usha/ Havells/ Phillips)

Supply and fixing of LED recessed mounting square slim LED down lighter 36 Watts for ceiling complete with internally prewired and connecting up with twin core flexible copper conductor cable of suitable size, driver and accessories complete all as specified and directed by Engr-in-Charge. (Make : Havells model/ cat part No VENUSNEOHE2X2PLR18-42WLED857MOD or equivalent model or cat No. of make Philips/ Crompton Greaves.)

Supply and fixing of basic all purpose surface and wall mounted LED light batten with polycarbonate housing & integrated electronic driver LED tube light fittings with 18 watts LED tube, 230 volt with and including all accessories, internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to light fittings complete all as specified and as directed (Make :Havells model/ cat part No LHEXBQP6IN1W018 or equivalent model of make Philips/ Crompton Greaves.)

Taking down unserviceable main switch/ DBs including MCB (SP, SPN, TPN any capacity) of any size/ capacitycomplete all as specified and directed by Engr-in-Charge.

Supply and fixing of MCB TPN 4 way, double door, 415 volts TPN Metalic Distributition board, concealed flush to wall for mounting MCBs factory made , conforming to IS : 13032 fabricated out of CRCA sheet not less than 1.20mm thick fitted with DIN channel, neutral link and 200 Amps rated bus bar DBs shall be semi glossy finished with epoxy polyster based powder paint sprayed and backed at high temperature , between powder paint process to ensure smooth finish and protection against corrsion atmosphere. the DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs, DB shall also be provided with lable marking indicating the incoming and outgoing circuits on all ways as specified, the DBs shall be of IP 42 protection class complete all as specified and directed by Engr-in-Charge. (Make-L & T/Legrand/ABB/Siemens)

-ditto- all as per item No. 1.25 above but SPN 12 way, double door, 230 Volts SPN Metalica Distribution Board

Supply and fixing of Miniature Circuit Breaker (MCB, SPN) single pole and neutral, 240 volts 63 Amps current rating 'B' curve 10 KA breaking capacity with thermal overload as well as magnetic short circuit tripping device with quick break trip free mechanism robust design and terminals having heat resistant moulding complete all as specified and directed by Engr-in-Charge. (Make : Legrand / ABB / L&T / ABB/Siemens.)

-ditto- all as per item No. 1.27 above but MCB SPN 40 Amps complete all as specified and directed by Engr-in-Charge. (Make : Legrand / ABB / L&T / ABB/Siemens.)

-ditto- all as per item No. 1.27 above but MCB SPN 32 Amps complete all as specified and directed by Engr-in-Charge. (Make : Legrand / ABB / L&T / ABB/Siemens.)

-ditto- all as per item No. 1.27 above but MCB SP 6-32 Amps complete all as specified and directed by Engr-in-Charge. (Make : Legrand / ABB / L&T / ABB/Siemens.)

Supply and fixing in repairs INSTANTANEOUS ELECTRIC White Blue water heater 05 ltr capacity, vertical type, energy efficient , not less than 4 star rated with necessary grouting bolts on wall and connection complete all as specified and directed by Engr-in-Charge. Make -Havells model No. GHWAIAPWB033 or equivalent of Recold/Luminous/ Crompton Greaves)

Supply and fixing in repairs of Telephone socket two terminal for incoming and out going DOT lines with connection complete all as specified and directed by Engr-in-Charge. (Make-Havells/ Siemens/ L&T/C&S/Legrand/ABB)

Supply and fixing in repairs of Telephone socket outlet 2 pin piano flush type ISI Marked with valid CML No two terminal for incoming and out going DOT lines with connection complete all as specified and directed by Engr-in-Charge.(Make-Havells/ Siemens/ L&T/C&S/Legrand/ABB)

Material and labour for non metalic PVC conduit HMS (Heavy Mechanical Stress) of 20 mm external dia including PVC conduit fittngs conceated in wall/floor/roof for receiving telephone cable including cutting, chasing and making good to existing surfaces including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge. (Make of PVC conduit:- FINOLEX / ANCHOR/ KALINGA/ SUPREME/ POLYCAB.)

Supply and fixing rigid non metalic PVC junction boxes(1 to 4 way) 20 mm external dia complete all as specified and directed by Engr-in-Charge. (Make:- FINOLEX / ANCHOR/ KALINGA/ SUPREME/ POLYCAB.)

Supply, Installation, testing and commissioning of BIPOD Maintenance Free Chemical Earthing based on 3000mm long Copper Bonded Earthing Electrode 200 Microns (Met-Chem) 76.30 mm outer dia duly filled with ITPC-EECP15 fixed with copper strip 20 x 3mm riveted or fixed with stainless steel nuts & bolts including necessary excavation and earth work in any strata, returning filling, disposal of surplus soil, earth pit size 2.4m x 2.4m x 3.6m deep in PCC 1:3:6 type C-1 using 20mm graded stone aggregate, funnel, with CI Frame and cover (Earth Pit not less than 3.00M deep below ground level). The electrode is surrounded by chemical (ITPC-EECP15) a mixture of sulphate, silica, iron oxide, nickel oxide, magnesium oxide, sodium oxide, zinc oxide, copper sulphate etc (Earth enhanced compound powder) & Crystallized Copper Material (CCM). Earth can have resistance <1 Ohm by using earth electrode is used as per the site requirements. Chemical Compound Powder to be provided minimum 50Kg per earthing including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge. Make: ITPC / Model: Met Chem CBEE50 / EECP-15 / KE / Inpocon/ JMU Earthing/ Tirupathi/ Ashlok Notes :- (a) Material used shall be alloy coated (250 - 300 microns) GI pipes of length 3000 mm. The outer dia of pipe shall be 76.30 mm , the dimensions may vary +/- 0.10 mm). (b) BFC - Two bags (25 Kg capacity of each bag). The quantity of BFC shall be generally for normal / good soils. In case the soil resistivity is high then the quantity of BFC shall be increased till get the desired result and the cost of the same is deemed to be included in the quoted rates.

Material and labour for sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded, unsheathed 1100 volts grade in PVC Conduit (heavy grade) of 20mm dia with all fittings and accessories surface type including one run 4 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694) as earth wire complete all as specified and as directed.

Material and labour for sub main wiring with four runs of single core 10 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded, unsheathed 1100 volts grade in PVC Conduit (heavy grade) of 32mm dia with all fittings and accessories surface type including two runs 10 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694) as earth wire complete all as specified and as directed. {Note for item No. 1.37 & 1.38:- (i) Two/ four runs of cable with one/ two runs earth wire and PVC conduit shall be measured as one unit length. (ii) Extra length of cable required for connection to DBs shall be deemed to be included in the unit quoted rate and shall not be measured separately. (iii) Earth wire shall run inside the conduit. (iv) Suitable color code of wire must be ensure for phase/ neutral/ earth. (v) (Make of cable:- NICCO / FINOLEX / RR KABEL/ HAVELL'S/ POLYCAB / KEI INDUSTRIES LTD. and Make of PVC conduit:- FINOLEX / ANCHOR/ KALINGA/ SUPREME/ POLYCAB.)}

Dismantling/opening up existing fan of size 1200 mm sweep, taking out all burnt/damaged windings insulating materials & cleaning internally as well as externally, rewinding the fan motor with super enamelled copper wire as per existing size/specification, replacement of complete insulating materials, varnishing drying up, cleaning & greasing of bearing/buses using new grease, reassembling and testing and transporting back to site and refixing it to original position. The rates quoted by the contractor shall deemed to include replacement of defective slip pin and roller rubber if worn out and connecting wire of 3 core pvc flexible wire upto 1.0 mtr all as specified and directed by Engineer-in-charge.

-ditto- all as per item No. 1.39 above but exhaust fan of size 450 mm sweep.

-ditto- all as per item No. 1.39 above but exhaust fan of size 300 mm sweep.

Material and labour for spray painting of ceiling fan of size 1200mm to 1400mm sweep of any make after preparation of old painted surface with one coat of white synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

Supply and fixing switch socket combination 5/6Amps and 15/16 Amps and 5 in 1, 5 pin flush type universal controlled by one switch complete all as specified and as directed. (Make : Anchor / Cona / Kinjal / Havells )

Section- 2

Supply, installation, testing and commissioning of Inverter Technology Hot and Cold, wall mounted Split Type Air Conditioner (indoor & outdoor unit with cordless remote control unit) of Capacity 2.0/ 2.2 TR, minimum BEE 4 star rating , fitted with rotary compressor, Refrigerant type R-410A/R-32, cooling capacity nominal (6000 Kcl/Hrs) including PVC FRLS grade multi stranded copper conductor cable 3 core 2.5 Sqmm for connections with outdoor unit, Powder coated brackets for outdoor unit, clamps, nuts, bolts washers drilling holes on walls/ceiling for connection/drain pipesand making good the disturbed surfaces of wall with cement mortar, white cement and painting work to match the existing surfaces of walls complete all as specified and directed. (Make:-Model No. ASGG24LFCD-B of O-General, Model No FTXF71TV of Daikin, Model No. 5200XRMB422ABXA of Hitachi or equivalent Make.

Supply & fixing heavy duty copper pipe 6mm (1/4") dia/ bore complete including insulation brazing, welding, nuts, bolts and screws of required size complete all as specified and directed by Engr-in-Charge.

-ditto- all as per item No. 2.02 above but copper pipe 15mm (5/8") dia/ bore.

Supply, Installation, testing and Commissioning of voltage stabilizer for automatic operation single phase, wall mounted ,Copper wounded ,Air cooled with digital display designed for input variation between 160 Volt to 260 Volt with output voltage 220 ± 9% Volt with Calibration accuracy ± 3% with high low cutoff , Intelligent time delay facility and of capacity 5.0 KVA. (Make-Microtek/Volina/Sinetrac/V-Guard/ Vinitec/ Andrew Yule/ Powerware)

Supply and fixing 15 mm bore Low density polyethylene (LDPE) drain pipe of pressure rating 6 kgf/sqcm for Split AC complete all as specified and directed by Engr-in-Charge. (Make: Supreme/ Prince/ Ashirvad/Prayag/)

Material and labour for AC sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded, unsheathed 1100 volts grade in PVC PVC casing caping (medium grade) of adequit size with all fittings and accessories surface type including one run 6 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694) as earth wire complete all as specified and as directed. {Note:- (i) Two runs of cable with one run earth wire and PVC casing caping shall be measured as one unit length. (ii) Extra length of cable required for connection to DBs shall be deemed to be included in the unit quoted rate and shall not be measured separately. (iii) Earth wire shall run inside the casing caping. (iv) Suitable color code of wire must be ensure for phase/ neutral/ earth. (v) (Make of cable:- NICCO / FINOLEX / RR KABEL/ HAVELL'S/ POLYCAB / KEI INDUSTRIES LTD and make of Casing Caping:- FINOLEX / PAYAL/KALINGA/ PRESTO PLAST.)}

Supply and fixing Single pole and neutral steel metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20/32 Amps complete all as specified and directed by Engr-in-Charge. (Make : Legrand / ABB / L&T / Siemens.)

Supply, installation, testing and commissioning of stainless steel four door reach in Frost Free Series (GN series) Deep Freezer, 5 star rated, 3+1 year warranty having hard top with locking arrangement, electric driven (single phase, 230W, 50Hz AC supply) of Capacity 1410.00 Ltrs with temperature range (Chiller/ Freezer - 2ºC - 10ºC) working with Non CFC Refrigerant (R-134a), energy efficient compressor, puff insulation, heavy duty caster wheels, Dixell Controller, EBM fan motor, SS 304 food grade steel inside and out side, Auto defrosting and auto evaporation of condensation water, Compressor (Make of compressor:- Danfoss/Embraco) , Tropicalized to perform at 40º Ambient complete all as specified and directed. (Make-Elan Pro model No. EGN140C4 or equivalent model of make SAMSUNG/ GODREJ/ VOLTAS/ BLUE STAR/ HITACHI as approved by Accepting Officer).

Material and labour for aluminium anodized powder coated partition as all of aluminium section 100mm x 44mm x 2mm thick frame rectangular section & panel of 5.5 thick frosted sheet glass in top panel and 12mm thick laminated nova pan in bottom panel with rubber linning & aluminium beading around length necessary fixing arrangements for bottom & top member of aluminium frame in floor/PCC/brickwork as per site requirement with rawal plug etc including chromium plated steel screws 60cm c/c, complete all as specified. (Make:- HINDALCO/ INDAL/ ALUMINIUM TECH INDUSTRIES/ V R ASSOCIATES/ AJIT INDIA/ JINDALCO.)

Material and labour for aluminium anodized powder coated doors using 96.6mm x 44.8mm x 1.60mm aluminium chowkhat, with 84mm x 44.7mm x 1.60 mm section vertical stile with 101.60mm x 44.8mm x 1.60mm rail mounted on floor spring with mortise lock, with aluminium tower bolts 150mm long (02 Nos) sliding bolt 300mm long (01 No) door handle 150mm long (20 Nos) and fitting all as specified and directed by Engr-in-Charge. Bottom panel with 12mm thick laminated nova pan and top panel with 5.5mm thick frosted sheet glass rubber beading of suitable size and complete all as specified. (Make:- HINDALCO/ INDAL/ ALUMINIUM TECH INDUSTRIES/ V R ASSOCIATES/ AJIT INDIA/ JINDALCO.)

Cutting of existing 15mm dia steel tubing for alterations or additions (Each cut measured) complete all as specified and as directed.

Screwing of existing 15mm dia steel tubing for alterations or additions (or lengthening screw on pipe to form connectorcomplete all as specified and as directed.

Taking up or down steel tubing and connections and removing from site 15mm bore of pipe complete all as specified and as directed.

Refixing old 15mm dia steel tubing and connections in new or old position walls, ceiling, floors, etc. complete all as specified and as directed.

Spply and fixing galvanised steel tubing 15 mm bore, medium grade with all fittings (such as bends, elbows, tees, short plugs and union etc.) fixed on wall or floor complete all as specified and as directed. (Make:- JINDAL STEEL/ PRAKASH/ TATA/ OSWAL.)

Supplying and fixing 15mm bore dia gun metal gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.(Make:- KIRLOSKAR/ LEADER / VENUS/ ZOLOTO/ AUDCO)

Supplying and fixing 15mm bore dia PTMT connection pipe of length 450mm including PVC washer on both side complete all as specified and as directed. (Make:- Prayag/ Polytuff)

Supply, installation, testing and commissioning of Inverter Technology Hot & Cold wall mounted Split Type Air Conditioner (indoor & outdoor unit with cordless remote control unit) of Capacity 1.5 TR, minimum BEE 4 star rating , fitted with rotary compressor, Refrigerant type R-410A/R-32, cooling capacity nominal (4500 Kcl/Hrs) including PVC FRLS grade multi stranded copper conductor cable 3 core 2.5 Sqmm for connections with outdoor unit, Powder coated brackets for outdoor unit, clamps, nuts, bolts washers drilling holes on walls/ceiling for connection/drain pipesand making good the disturbed surfaces of wall with cement mortar, white cement and painting work to match the existing surfaces of walls complete all as specified and directed. (Make:- Model No. ASGG18LFCD-B of O-General, Model No. FTXF50TV16 of Daikin, Model No. 5200XRMB517ABXA of Hirachi or equivalent Make.

Supply and testing BEE 4 star rated frost free refrigerator, double door, electric driven (single phase, 230 volts, 50Hz AC supply) of capacity not less than 308 litres with non CFC refrigerator inverter based compressor complete all as specified and directed. (Make:- LG /SAMSUNG/ VEDIOCON / GODREJ/ VOLTAS/ WHIRLPOOL/ BLUE STAR/ HITACHI)

Supply, installation, testing and commissioning of voltage stabilizer for automatic operation single phase, wall mounted, copper wounded, air cooled with digital display designed for input variation between 160 volt to 260 volt with output voltage 220 ± 9% volt with calibration accuracy ± 3% with low cutoff, intelligent time delay facility and of capacity 4.0 KVA complete all as specified and directed. (Make-Microtek/Volina/Sinetrac/V-Guard/ Vinitec/ Andrew Yule/ Powerware)

Supply only self supporting stand of size 625mm x 625mm x 900mm (25" x 25" x 36") made up of angle iron 25mm x 25mm x 4mm including two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide chrome primer for evapoeative air cooler (Desert Cooler) complete all as specified and directed.

Supply & fixing heavy duty copper pipe 12 mm (1/2") dia/ bore complete including insulation brazing, welding, nuts, bolts and screws of required size complete all as specified and directed by Engr-in-Charge.

-dito- all as per item No 2.22 but copper pipe 18mm (3/4") dia/bore complete.

Section- 3

Supply and fixing of heat resistant flame retardant (HRFR) PVC insulated industrial type copper conductor multi stranded (Unsheathed) flexible cable 95 Sq mm, single core, 1100 Volts, 4 runs confirming to IS 694 using suitable size of copper Lugs/Thimbles at both ends of cables including necessary fixing arrangement with suitable size of saddles with wall/ceiling complete all as specified and directed by Engr-In-Charge. (Make of cable:- FINOLEX / RR KABEL/ HAVELL'S/ POLYCAB) Note:- Four runs of 95 Sqmm cable with assessories shall be measured and paid as one unit length and cost of the same to be included in the coated rate..

Inspection, testing and commissioning including callibration of 120 KVA UPS 02 Nos installed in new server room and 120 KVA UPS - 03 Nos installed at old server room complete callbration done by authrized OEM of Emerson/Vertiv manufacturer only all as required and directed by Engr-in-Charge.

Supply and fixing cable tray made out of 2mm thick GI coated perforated sheet, 150mm width and 50mm height complete fixing on wall by using angle iron of size 25mm x 25mm x 3mm thick complete all as specified and as directed by Engr-In-Charge.

Section- 4

Surface excavation not exceeding 30cm deep and averaging 15cm deep and geting out in hard/dense soil complete all as specified and directed by Engr-in-Charge.

Removing excavated soil to a distance exceeding 250 metre but not exceeding 500m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Material and labour for brick work with locally available best quality bricks (sub class 'B' bricks) , old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

Material and labour for rendering 15 mm thick on other than fair faces of brick work surface in CM 1:4 wall surface shall be finished the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Material and labour for rendering 10 mm thick in Cement Mortar (1:4) on fair faces of brick work or concrete surfaces of wall, finished even and smooth with out using extra cement complete all as specified and as directed.

Materials and labour for preparation of surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed. (Make of Cement Base Paint & Primer:- JOTUN INDIA P. LTD./ CRIMOCEM SUPER CEMENT PAINTS/ SNOWCEM PLUS/ BERGER (XTRCE M-76 SUPERIOR CEMENT PAINT) / ASIAN PAINT ( GUTUCAM)

Materials and labour for providing cement concrete type B0 (1:2:4), using 12.5mm graded stone aggregate as in roof kerb, benching/padding rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge.

Supply and fixing of mild work in roof trusses (framed) trussed, purlins, crane gantries, rails and fasterings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410- W(Gde- E-250) quality- B complete all as specified and directed by Engr-in-Charge.

Supply and fixing of pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering or to wall fixed to wall fixed with self tapping screws/with L or J hook or cranked hook bolts complete all as specified and directed by Engr-in-Charge. (Make:- SAIL/ TATA/ JINDAL/ SEXENA MARINE TECH (P) LTD./ PRESTER INFRASTRUCTURE PROJECT LTD.)

Material and labour for hard core of gauge not exceeding 63mm with broken bricks, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for plain cement concrete 1:3:6 type C-2 (40mm graded stone aggregate), 75mm thick as in sub base cemplete all as specified and directed by Engr-in-Charge.

Material and labour for 100mm thick plain cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) as in floor complete all as specified and directed by Engr-in-Charge.

Material and labour for mild steel angle iron and other section in door chowkats and frames including mild steel flat iron 25mm x 3mm as in braces and hold fasts 6 Nos each chowkat 250 mm long complete welded and grinded for smooth surfaces all as specified and directed by Engr-in-Charge.

Material and labour for steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.

Material and labour for steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.

Material and labour for steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed by Engr-in-Charge.

Material and labour for 4mm thick plain sheet glass ordinary quality and glazing with oil putty in squares as directed and specified and directed by Engr-in-Charge. (Make:- ASAHI/ MODIGUARD FLOAT/ SAINT GOBAIN/ TRIVENI FLOAT/ IAG)

Material and labour for preparation of new painted steel surfaces of any description and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. (Make of paint and primer:- ASIAN/ BERGER/ JHONSON & NICHOLSON/ SHALIMAR.)

Tushar engineers

SNOWY ENGINEERING INC

V S BUILDER