Repair Maint of internal wiring including fitting and other connected items in OTM accn at Mil Stn Abohar

Amount

Taking down carefully any type point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing ( Except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing.

M&L point wiring (CONCEALED) for using 1.5 sqmm nominal cross sectional area copper conductor mutimultistranded ,PVC insulated unsheathed , FRLS cables in and including using PVC conduits not les than 20 mm dia and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multi-multistranded copper conductor , FRLS, green PVC insulated unsheathed earth wire and connecting to earth dolly using color code as per IS and making good all disturbed work to match the existing for One light/fan point controlled by one 5 Amps one way switch and all as specified and brass screws, washers etc. complete all as specified.

All as per Item No. 2 here in before but for One three pins 5 Amps switch socket outlet point on independent board

All as per Item No. 2 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches

All as per Item No. 2 here in before but for One light point controlled by two 2-way switches of 5 amps

All as per Item No. 2 here in before but for One bell point controlled by one bell push

Description all as per item No 02 here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

Description all as per item No 02 here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

M & L point wiring with PVC FRLS insulated unsheathed multistranded copper conductor of size 1.5 Sqmm, 1100V grade in Existing concealed conduit, and one run PVC FRLS insulated unsheathed copper conductor of size 1.5 Sqmm as earth continuity wire and connected to common earth dolly using color code as per IS and all as specified with copper lugs/timbles inserted in existing MS boards/boxes complete heavy duty for housing switches, , regulators, bell push etc, and making good all disturbed work to match the existing for One light / fan point controlled by one way piano switch 5 Amp. and complete all as specified and directed.

All as per Item No. 9 here in before but for One three pins 5 Amps switch socket outlet point on independent board

All as per Item No. 9 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches

All as per Item No. 9 here in before but for One light point controlled by two 2-way switches of 5 amps

All as per Item No. 9 here in before but for One bell point controlled byh one bell push

M & L point wiring with PVC FRLS insulated unsheathed multistranded copper conductor of size 2.5 sqmm, 1100V grade in existing concealed conduit, for 6 pin 6/16 Amps switch socket combination on independent board with PVC FRLS insulated unsheathed copper conductor of size 2.5 Sqmm using as earth wire continuity and connected to common earth dolly using color code as per IS and making good all disturbed work to match the existing and all as specified complete existing MS boards for switches all as specified & directed.

M&L point wiring for using 1.5 sqmm nominal cross sectional area copper conductor multistranded ,PVC insulated unsheathed , FRLS cables in and including Surface PVC casing and caping and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multi-multistranded copper conductor , FRLS, green PVC insulated unsheathed earth wire and connecting to earth dolly using color code as per IS and making good all disturbed work to match the existing and all as specified and brass screws, washers etc. complete for One light/fan point controlled by one 5 Amps one way switch all as specified.

All as per Item No. 15 here in before but for One three pins 5 Amps switch socket outlet point on independent board

All as per Item No. 15 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches

All as per Item No. 15 here in before but for One light point controlled by two 2-way switches of 5 amps

All as per Item No. 15 here in before but for One bell point controlled byh one bell push

Description all as per item No 15 here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly using color code as per IS and complete all as specified and directed.

Description all as per item No 15 here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly using color code as per IS and complete all as specified and directed.

M&L point wiring for using 1.5 sqmm nominal cross sectional area copper conductor multistranded ,PVC insulated unsheathed , FRLS cables in and including PVC surface conduit and fittings , including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multi-multistranded copper conductor , FRLS, green PVC insulated unsheathed earth wire and connecting to earth dolly using color code as per IS and making good all disturbed work to match the existing and all as specified and brass screws, washers etc. complete for One light/fan point controlled by one 5 Amps one way switch all as specified.

All as per Item No. 22 here in before but for One three pins 5 Amps switch socket outlet point on independent board

All as per Item No. 22 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches

All as per Item No. 22 here in before but for One light point controlled by two 2-way switches of 5 amps

All as per Item No. 22 here in before but for One bell point controlled byh one bell push

Description all as per item No 22 here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

Description all as per item No 22 here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

S & F switch piano one way 5/6 amps 240 volts complete all as specified and directed.

S & F Bell push AC, 50 Hz, 230 Volts, 5 amps complete all as specified.

S & F Bell ding dong AC, 230 Volts, Single pole complete all as specified.

S & F socket 5 in 1, 5 amps flush type complete all as specifeid.

S & F socket 5 in 1, 5/16 amps flush type complete all as specifeid.

S & F switch piano flush type 5 amps but 2 way type complete all as specified.

M & L lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete, Make- Anchor/SSK/CONA

M & L Ceiling rose, 3 terminals/phase type, fabricated of PVC/Polycarbonate, Isolated body complete, Make-Anchor/SSK/CONA

M & L Point wiring (CONCEALED) complete with ISI marked 1.5 Sqmm single core PVC insulated unsheathed cable 1100 Volts grade with multistranded copper conductor drawn through in and including medium grade PVC conduit not less than 20 mm dia and accessories in wall/roof/ceiling surface etc suitable for modular plates including terminal boxes suitable for fixing modular switches, sockets etc and 1.5 Sqmm copper conductor as earth continuity to connect common earth dolly using color code as per IS and making good all disturbed work to match the existing and all as specified complete for One light/fan point controlled by one 5 Amps one way switch all as directed :- (Note - Accessories like modular metal boxes, inner & outer plates will be paid and measured separately in respective items of schedule)

All as per Item No. 37 here in before but for One three pins 5 Amps switch socket outlet point on independent board

All as per Item No. 37 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches

All as per Item No. 37 here in before but for One light point controlled by two 2-way switches of 5 amps

All as per Item No. 37 here in before but for One bell point controlled byh one bell push

Description all as per item No 37 here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly using color code as per IS and complete all as specified and directed.

Description all as per item No 37 here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly using color code as per IS and all as specified complete all as specified and directed.

S & F modular switch 1 way 6 amps, 1 module complete all as directed by Engr-in-chrage.

S & F modular switch 1 way 16 amps, 1 module complete all as directed by Engr-in-chrage.

S & F modular switch 2 way 6 amps, 1 module complete all as directed by Engr-in-chrage.

S & F modular bell push 6 amps, 1 module complete all as directed by Engr-in-chrage.

S & F modular sockets 6 amps, 2/3 pin combined two module complete all as directed by Engr-in-chrage.

S & F modular sockets 6/16 amps, 2/3 pin combined two module complete all as directed by Engr-in-chrage.

S & F modular white cover plate with frame, 1 module complete all as directed by Engr-in-charge.

S & F modular white cover plate with frame, 2 module complete all as directed by Engr-in-charge.

S & F modular white cover plate with frame, 3 module complete all as directed by Engr-in-charge.

S & F modular white cover plate with frame, 4 module complete all as directed by Engr-in-charge.

S & F modular white cover plate with frame, 6 module complete all as directed by Engr-in-charge.

S & F modular white cover plate with frame, 8/12 module complete all as directed by Engr-in-charge.

S & F modular flush metal box 1/2/3 module complete all as directed by Engr-in-charge.

S & F modular flush metal box 4 module complete all as directed by Engr-in-charge.

S & F modular flush metal box 5/6 module complete all as directed by Engr-in-charge.

S & F modular flush metal box 8/12 module complete all as directed by Engr-in-charge.

S & F Modular Buzzer, Ding Dong AC. 230 volts, single pole

S & F Modular Bell, AC, 230 volts, single pole

S & F modular fan regulator, step type, 120 watts, W-2 module complete all as directed by Engr-in-chrage.

M & L for point wiring with Television co-axial cable in and including concealed PVC conduit (25 mm dia) and conduit accessories and metal flush box of one module with cover fixed with screw and cap washers for Television ponint and making good all disturbed work to match the existing and all as specified and directed (Make: Finolex/NICO/KDK for Television cable and make- Presto plast/Plaza for conduit)

M&L for modular type TV socket (Make: Carbtree, Cat No: ACAKTOW000)

M & L for point wiring with Telephone cables in and including concealed PVC conduit (20 mm dia) and conduit accessories and metal flush box of one module with coner fixed with screw and cap washers for Telephone point and making good all disturbed work to match the existing and all as specified and directed (Make: Finolex/NICO/KDK for Television cable and make- Presto plast/Plaza for conduit)

M&L for modular type Telephone socket (Make: Carbtree, Cat No: ACAKTOW000)

M&L for submain wiring comprising single core ,4 Runs of 10 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits and conduit fittings not less than 25 mm dia complete, including provision of 2x10 sqmm nominal cross sectional area multimultistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS and specified and making good all disturbed work to match the existing complete incl taking down old UNSV sub main all as specified. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

M&L for submain wiring comprising single core ,4 Runs of 6 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits and conduit fittings not less than 25 mmdia complete, including provision of 2x6 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS and specified and making good all disturbed work to match the existing complete incl taking down old UNSV sub main all as specified. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

M&L for submain wiring comprising single core ,2 Runs of 6 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. in PVC conduit and its fittings complete including provision of 1X6 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS and specified and making good all disturbed work to match the existing complete incl taking down old UNSV sub main all as specified. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

M&L for submain wiring comprising single core ,2 Runs of 4 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. in PVC conduit and its fittings complete including provision of 1X4 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS and specified and making good all disturbed work to match the existing complete incl taking down old UNSV sub main complete all as specified and directed by Engr-In-charge. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

M & L cutting chases, pinning in, making god to facings where reuired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc ; and cutting chases for concealed water tubing or concealed wiring etc, and making good, cutting not exc 10 cm girth in brick walls complete all as directed by Engr-in-charge .

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium standard conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed stranded conductor of 2 core 10 sq. mm nominal cross section in service connections complete all as specified and directed by Engr-In-charge.

Material and labour for brackets suitable for building security light fittings made out of light grade 20 mm dia GI tubing bent to shape of up to 3.5 meter length complete with aluminium painting of two coat and necessary nuts, bolts and clamps including taking down old unserviceable compelete all as directed by Engr-in-charge.

Dismantling and taking down Street/bldg sec light fitting of single/double of any wattage or size street light fittings

M&L LED tube light fixture, environmental friendly energy efficient ready to use 18/20W LED 6500K and above (4') complete all as specified and directed by Engr-In-charge. Make:Syska PriceSSK-ALB-20W I & SSK-TL-20W I or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Polycab as recommended by Engr-Incharge and approved by GE.

M&L batton for LED tube light fixture with extruded aluminium heat sink, environmental friendly energy efficient ready to use with 18/20 W LED 6000K and above (4') including electric connection with PVC copper flexible twin core cable, 1.0 sqmm from ceiling rose to light fitting complete all as specified and directed by Engr-In-charge. Make: Havells/Crompton Greaves/ Philips/Wipro/Syska/polycab as recommended by Engr-Incharge and approved by GE.

M&L for LED tube light fitting of LED T5 tube lights (6500K) environomental freiendly energy efficient of 18/20 Watt LED including electric connection with PVC copper flexible twin core cable, 1.0 sqmm from ceiling rose to light fitting complete all as specified and directed by Engr-In-charge. Make:Syska SSK-SQ2001 20W or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Polycab as recommended by Engr-Incharge and approved by GE.

S & F LED street light luminaries 20/25 watts with IP66 complete with pressure dia cast aluminium housing with GI pipe bracket made out of 25 mm dia medium grade pipe (60 cm long) bend to shape including fixing arrangement to wall with MS flat 25x3mm-2 Nos by nut, bolts and washers including electric connection with PVC copper flexible twin core cable 1.0 sqmm from ceiling rose to light fitting complete all as specified and directed by Engr-In-charge. Make:Syska max glow series SSK-ST25W-MG or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Polycab as recommended by Engr-Incharge and approved by GE.

S & F LED street light luminaitres 15 watts with IP66 complete with pressure dia cast aluminium housing with GI pipe bracket made out of 25 mm dia medium grade pipe (60 cm long) bend to shape including fixing arrangement to wall with MS flat 25x3mm-2 Nos by nut, bolts and washers including electric connection with PVC copper flexible twin core cable 1.0 sqmm from ceiling rose to light fitting complete all as specified and directed by Engr-In-charge. Make:Syska max glow series SSK-MST 15W or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Polycab as recommended by Engr-Incharge and approved by GE.

M&L for LED Batten with LED tube light integrated LED channel of capacity 05 Watt white colour complete all as specified and directed by Engr-In-charge. Make:Bajaj BCLSB 05WH or equavlent of Havells/Crompton Greaves/ Philips/Wipro/Syska/Polycab as recommended by Engr-Incharge and approved by GE.

M&L for LED Batten with LED tube light integrated LED channel of capacity 10 Watt white colour complete all as specified and directed by Engr-In-charge. Make: Bajaj BCLSB 10WH or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Syska/Polycab as recommended by Engr-Incharge and approved by GE.

M&L for Skylux LED efficient LED surface 2'x2' luminaire & glare free soft illumination of capacity 36Watt LED white colour complete all as specified and directed by Engr-In-charge. Make:Bajaj BZSSQL 36W LED WH or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Syska as recommended by Engr-Incharge and approved by GE.

M&L for series of downlighters of capacity 12 Watt with low depth square powder coated white finish with drop down PC diffuser to deliver low glare ilumination with optimized heat sink fo efficient heat dissipation and separate replaceable electronic driver suitable for office & retail spaces complete all as specified and directed by Engr-InCharge Make:SYSKA SSK-SDS12W-N or SSK-SDC 12W-N equivalent in Havlls/Crompton Greaves/Bajaj/ Philips/Wipro as approved by GE.

M&L for sleek surface mounted square LED downlight of capacity 15 Watt with AL die-cast body, finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation complete all as specified and directed by Engr-InCharge Make:SYSKA SSK-SDS15W-N or SSK-SDC 15W-N equivalent in Havlls/Bajaj/Crompton Greaves/ Philips/Wipro as approved by GE.

M&L for Galaxy LED suspended type decorative LED low bay luminaasire white colour of capacity 24 Watt complete all as specified and directed by Engr-InCharge Make: Bajaj BLSPD LED 24W WH or equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE.

M&L for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge Make: Bajaj BIBWP LED 10W WH or equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE.

M&L for LED building street light luminaire of capacity 20 Watt with pressure die-cast housing with individual LEDs as light source and lens embedded PC cover having TOP opening separate driver compartment with IP 66 protection and impact resistance of IK 07 Make: Bajaj BRLEPLED 20W LED V2 or equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE.

Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser TPN DB having facility to fix MCCB in incomer upto 125Amps and MCBs in outgoing, TPN 4 ways, Double door type complete fitted with bus bars, neutral links, IP-54 protection Isolated Neutral bar,door earthing,cement spill ptorector and blanking plates including making good disturbed surfaces complete all as specified and directed. make- Model No 812043 of IndoAsian or equivalent of Legrand/L&T Hager/C&S/INDO KOPP/Standard/Havells

Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser SPN DB having facility to fix MCB in incomer and MCBs in outgoing, SPN 12 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed. Make- Model No 811828 of IndoAsian or equivalent of Legrand/L&T Hager/C&S/INDO KOPP/Standard/Havells

Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser SPN DB having facility to fix MCB in incomer and MCBs in outgoing, SPN 8 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed. Make- Model No 811826 of IndoAsian or equivalent of Legrand/L&T Hager/C&S/INDO KOPP/Standard/Havells

Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser SPN DB having facility to fix MCB in incomer and MCBs in outgoing, SPN 4 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed. Make- Model No 811824 of IndoAsian or equivalent of Legrand/L&T Hager/C&S/INDO KOPP/Standard/Havells

Supply and fixing Plug and socket type DB (Functional Unit) 20 Amps capacity with provision of single pole 20 amps MCB, plug top and earth plug, grouted flush to walls complete all as specified. Make- Model No 811956/811955 of IndoAsian or equivalent of Legrand/L&T Hager/C&S/INDO KOPP/Standard/Havells Schneider/C&S)

Supply and fixing MCCB TPN 63 Amps 415 Volts of braking capacity 36 KA (Adjustable Thermal and Adjustable Magnetic Release Setting) complete taking down old unserviceable one and making necessary connections as existing and cleaning the terminals with CTC solutions complete all as specified and directed. Make : Havells/Legrand/IndoAsian/Schneider/HPL/Standard

All as per Ser Item No 93 but 100 Amps with braking capacity 36 KA.

All as per Ser Item No 93 but 125 Amps with braking capacity 36 KA.

Supplied and fixed Miniature circuit breaker (MCB), single pole, 240 Volts, of 6-32 amps current rating and 10 KA breaking capacity, B' series type complete all as directed by Engr-in-charge. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)

Supplied and fixed Isolator TPN, 415 Volts, of 63 amps current rating complete all as directed by Engr-in-charge. Make-Model No 811561 of IndoAsian or equivalent of Legrand/L&T Hager/C&S/INDO KOPP /Standard/Havells/ Schneider/C&S)

Supplied and fixed Isolator TPN, 415 Volts, of 100 amps current rating complete all as directed by Engr-in-charge. Make- Model No 811563 of IndoAsian or equivalent of Legrand/L&T Hager/C&S/INDO KOPP /Standard/Havells/ Schneider/C&S)

Supplied and fixed Isolator, Double pole, 240 Volts, of 32 amps current rating complete all as directed by Engr-in-charge. Make- Model No 811434 of IndoAsian or equivalent of Legrand/L&T Hager/C&S/INDO KOPP/Standard/Havells/ Schneider/C&S)

Supplied and fixed Isolator, Double pole, 240 Volts, of 40 amps current rating complete all as directed by Engr-in-charge. Make- Model No 811550 of IndoAsian or equivalent of Legrand/L&T Hager/C&S/INDO KOPP/ /Standard/Havells/ Schneider/C&S)

Supplied and fixed Isolator, Double pole, 240 Volts, of 63 amps current rating complete all as directed by Engr-in-charge. Make- Model No 811551 of IndoAsian or equivalent of Legrand/L&T Hager/C&S/INDO KOPP/ Standard/Havells/ Schneider/C&S)

M&L for Earthing complete with GI earth plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire 4 mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by galvanized iron pipe 40mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed after taking down old earthing.( GI wire upto 7.5m including testing consider in this item).

Suuply and fixing on load change over switches 4 pole in sheet steel enclosure of 63 amps complete all as specified and directed Make: Make-Indoasian Cat: ITAS0063 or equvalent of Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)

Suuply and fixing on load change over switches 4 pole in sheet steel enclosure of 100 amps complete all as specified and directed Make: Make-Indoasian Cat: ITAS0100 or equvalent of Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)

Suuply and fixing on load change over switches 4 pole in sheet steel enclosure of 125 amps complete all as specified and directed Make: Make-Indoasian Cat: ITAS0125 or equvalent of Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)

Suuply and fixing on load change over switches 4 pole in sheet steel enclosure of 160 amps complete all as specified and directed Make: Make-Indoasian Cat: ITAS0160 or equvalent of Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)

Supply &fixing LED driver 18/20 W LED recess/surface light fitting Indoor type suitable for existing light fitting as per sample complete all as specified and directed.

Supply &fixing LED driver 36/40 W LED recess/surface light fitting Indoor type suitable for existing light fitting as per sample complete all as specified and directed.

Taking down/ dismantling complete ceiling fan of size 1200/1400 mm sweep down rod with its canopies, shackle, condenser housing with its rubber bushes, split pins, unscrewing the body parts of ceiling fan,cutting the unserviceable winding of starter, rotor and taking out ball bearing, gun metal bush etc. complete to carry out the following repairs :- (a) Removing of burnt out fan winding and re-winding of motor with suitable size of copper enamelled wire, varnishing, heating as per manufactures design and directed and re-assembling and painting of ceiling fan by scraping/removing old spray paint with brush/emery paper and spray painting with two coat of synthetic enamelled paint complete ceiling fan fixing only old/new spare parts (i.e.) rubber bush of shackle and condenser housing, condenser, gun metal bushes, ball bearing, twin twisted copper cable, etc complete all as specified and directed by Engineer-in-charge. (Note :- 1. Ball bearing and Gun metal bush are measured and paid separately as supply only rates and minor spares like condensor, rubber bush shackle,holder deemed to beinclude in quoted rates). 2. Repair/Rewinding of fan shall be carried out in MES yard to bring adequate winding machine,tools & plants and necessary motor winder at site as directed.

All as per Item No.109 here-in-before but exhaust fan of size 220/250/300/380/450 mm sweep.

Taking down ceiling fan of 1200/1400 mm sweep by unscrewing nut/bolts from its position and fixing the same to its original place after necessary cleaning, oiling, greasing, servicing/overhauling and replacement of bush, bearing, condenser and including painting of ceiling fan by scraping/removing old spray paint with brush/emery paper and spray painting with two coat of synthetic enamelled paint complete all as specified and directed and marking MES number ass as directed by Engr-in-Charge. (Note :1. Bush, ball bearing are measured and paid separately as supply only rates and minor spares like condensor, rubber bush shackle,holder deemed to be include in quoted rates ) 2. Repair/Servicing of fan shall be carried out in MES yard to User site.

All as per item No 111 here in before but exhuast fan 220/250/300/380/450 mm sweep complete all as specified and directed and marking MES number ass as directed by Engr-in-Charge

Supply only ball bearing number of 6201/6202/6203/6204 as required complete all as specified and directed. (Make : SKF/NBC).

Supply only gun metal bush as per existing specification and make as per sample and confirming to ISI complete all as specified and directed.

S&F for Condenser 2/2.5/3.15.4.0 MFD as per existing capacity and make as per sample and confirming to ISI complete all as specified and directed. (Make : Universal/Standard/Jyoti/Usha)

Supply only exhaust fan Louvers GI/MS/PVC suitable to size as per exising fans 220/250/300/380/450 mm complete all as specified and directed

Supply only fan regulator electronic (socket) type, single phase, 230Volt complete all as specified and directed Make: Anchor/Cona and equivalent make

Taking down existing control board and supplying and fixing CRCA sheet metal board made of 2.0 mm thick metal sheet and painting 2 coats of synthatic enamel paint over a coat of primer inluding copper bus bar and fixed with wall for fixing 04 Nos of meters complete with wiring,fitting and accessories, locking arrangement with handle (not less than size of box 100mmx80mmx25mm and adequate depth for the following equipments,internal wiring and termination of external cables,lugs,glands,wire thimbles and conduit/flexible pipe for finishing as required) comprise of following:- (a) Incoming 63 Amps 4 pole MCCB 25 KA -01 Nos (b) Bus bar of 200 Amps TPN & Earth (c) 40 Amps DP MCB -04 Nos ( for Electric DU Meter) (d) 10 Amps DP MCB - 01 Nos ( out going for Stair case/garage light circuit) (e) Fixing only existing single phase KWH meter after taking out carefully for refixing in panel.

S&F cable end jointing kit for LT, 1100 Volt (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 16 to 50 sqmm. Make: Denson/3M

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq. mm 4 core

All as per item above herein before but the size cross-sectional area 10 sq. mm 4 core

All as per item above herein before but the size cross-sectional area 16 sq. mm 4 core

All as per item above herein before but the size 25 sqmm 4 core

All as per item above herein before but the size 35 sqmm 3.5 core

All as per item above herein before but the size 50 sqmm 3.5 core

Excavation in trenches not exceeding 1.5 mtr depth width and not exceeding 1.5m depth for laying under ground cable in loose/soft soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm.

Removal of surplus soil obtained from excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.

M&L for sand cushioning for protection of PVC cable with screen wash river sand and punning to proper required cover.

M&L for PCC preparation including cutting up to 45 cm width and depth of the road/hard standing and making good disturbed surfaces by using PCC type C2(1:3:6) by using 40mm graded stone aggregate for the fixing the pipe/laying cables complete all as directed by the Engr. in Charge.

M&L for 40mm dia steel tubes (light grade) galvanised with fittings, laid in trenches/wall for protection of underground earth strip when crossing the road/fixing on wall as in repair complete all as specified and directed. (MAKE: JINDAL/PRAKASH/SURYA)

M&L for 50mm dia steel tubes (light grade) galvanised with fittings, laid in trenches/wall for protection of underground earth strip when crossing the road/fixing on wall as in repair complete all as specified and directed. (MAKE: JINDAL/PRAKASH/SURYA)

M&L for bricks of sub class ‘B’ bricks, for cable protection in trenches laid dry and flat.

Taking out faulty underground 1100 volt grade LT cable of different sizes by excavation and removing bricks of any size and relaying in the same trenches or rerouting after rectification of fault or replacing faulty portion of cable with new cable and removing of surplus soil and using new bricks as required complete all as specified and directed. Note:1. New LT cable replace with fault portion ,joints shall be measured and paid separately under respective items of the schdule. 2. Retrived old serviceable bricks will be laid in trenches for cable protection. if extra bricks and sand required at site shall be measured and paid separately under respective items of the schdule. 3. Earth work and excavation will be measured and paid separately under respective items of the schdule.

Material and labour for disconnecting faulty/burnt end portion of cable by removing the cable from loop including necessary excavation & earth work, relaying and reconnecting the cable by removing faulty/burnt portion of incoming and out going cables at pole connection/panel boards and preparing fresh terminals with suitable size of thimbles,lugs and glands or gland plates as suitable of any size and number of cables incoming out going at panel board`

ROYAL BUILDERS

SUDESH ENTREPRISES