8869 MAINT/REP/REPLMENT STRT LIGHT POLES SEC LIGHT FTGS PANNEL EARTHING STRT LIGHT DRIVERS STRT LIGHT PANEL CABLE POLES AND MISC WORK AT 4 RMC CH CPLX CMDC RF LINE MI LINE NO 1 LINE LH ROAD SAIBABA CPLX CHSC ALC AND CONNECTED AREA UNDER AGE EM S PUNE

Amount

S&F in repair LED flood lights fitting 150 watts High power LED and unique flood optics to ensure uniform distribution and maintenance free system with die cast aluminium housing and toughened glass cover Specially designed for LED Floodlight luminaire with energy saving and advance system. CAT Part No LF20-192-060-57-G2 of wipro make and equivalent in Bajaj/ Havells/WIPRO/HPL

S&F in repair driver suitable for LED street light fitting of 20/25/35 wattage as per the existing make of the fitting and testing lights complete all as directed by Engineer-in-Charge

S&F in repair driver suitable for LED street light fitting of 40 wattage as per the existing make of the fitting and testing lights complete all as directed by Engineer-in-Charge

S&F in repair driver suitable for LED street light fitting of 45 to 60 wattage as per the existing make of the fitting and testing lights complete all as directed by Engineer-in-Charge

S&F in repair driver suitable for LED street light fitting of 75 to 90 wattage as per the existing make of the fitting and testing lights complete all as directed by Engineer-in-Charge

S&F in repair driver suitable for LED street light fitting of 100 to120 wattage as per the existing make of the fitting and testing lights complete all as directed by Engineer-in-Charge

S&F in repair driver suitable for LED street light fitting of 150 wattage as per the existing make of the fitting and testing lights complete all as directed by Engineer-in-Charge

S&F in repair Integral LED Street Light Luminaire 40 W comprising of epoxy powder coated pressure die cast aluminium housing, enclosed with toughened glass cover in frame icluding 40 mm or suitable for new fitting size GI Pipe 1.2 mtr long complete with accessories conforming. Make Cat Part No LR02-451-XXX-57-XX of Wipro (sky line LED) or of equivalent in Bajaj/ Havells/phillips/.HPL all as specified here-in-after.

S&F in repair Integral LED Street Light Luminaire 60 W comprising of epoxy powder coated pressure die cast aluminium housing, enclosed with toughened glass cover in frame including 50 mm or suitable for new fitting size GI Pipe 1.2 mtr long complete with accessories conforming. Make Cat Part No LR02-671-XXX-57-G2 of Wipro (sky line LED) or of equivalent in Bajaj/ Havells/phillips/HPL all as specified here-in-after.

S&F in repair LED Street Light Luminaire 90 W comprising of epoxy powder coated pressure die cast aluminium housing, enclosed with toughened glass cover in frame including 50 mm or suitable for new fitting size GI Pipe 1.2 mtr long complete with accessories conforming. Make Cat Part No LR02-102-XXX-57-G2 of Wipro (sky line LED) or of equivalent in Bajaj/ Havells/phillips/HPL all as specified here-in-after.

S&F in repair Integral LED Street Light Luminaire 120 W comprising of epoxy powder coated pressure die cast aluminium housing, enclosed with toughened glass cover in frame including 50 mm GI Pipe 1.2 mtr long complete with accessories conforming to Make Cat Part No LR02-132-XXX-57-G2 of Wipro (sky line LED) or of equivalent in Bajaj/ Havells/Phillips/HPL all as specified here-in-after.

S&F in repair Integral LED Street Light Luminaire 150 W comprising of epoxy powder coated pressure die cast aluminium housing, enclosed with toughened glass cover in frame including 50 mm or suitable for new fitting size GI Pipe 1.2 mtr long complete with accessories conforming to Make Cat Part No LR02-182-XXX-57-G2 of Wipro (sky line LED) or of equivalent in Bajaj/ Havells/Phillips/HPL all as specified here-in-after.

Supply and errecting in true vertical position steel tubular swaged pole swan neck type single arm 9 mtr long with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31, including painting with anti corrosive black bituminous paint internally complete and externally up to planting depth with and externally exposed portion with Aluminium paint twin coat over a coat of red oxide primer upto 1.5 mtr above ground level all including taking down unsv/ damaged pole all as required at site or directed by Engr-in-charge. (Note: Excavation and earth work, PCC for foundation and coping shall be measured paid seperately under respective item of this schedule.)

Supply and fix in replacement main power board for Emerson make for online UPS of 30 Min backup, three phase, 415 volts 20 KVA Capacity complete all as directed by Engr-in-charge.

Supply and fix in replacement main power board for Emerson make for online UPS of 30 Min backup, three phase, 415 volts 30 KVA Capacity complete all as directed by Engr-in-charge.

Supply and fix in replacement main power board for Emerson make for online UPS of 30 Min backup, three phase, 415 volts 40 KVA Capacity complete all as directed by Engr-in-charge.

Supply and fix in replacement main power board for Emerson make for online UPS, single phase, 240 volts 05 KVA Capacity complete all as directed by Engr-in-charge.

Supply and fix in replacement main power board for Emerson make for online UPS of 30 Min backup, three phase, 415 volts 15 KVA Capacity complete all as directed by Engr-in-charge.

Supply and fix in replacement DSP board Emerson make for online UPS of 30 Min backup, three phase, 415 volts 20 KVA Capacity complete all as directed by Engr-in-charge.

Supply and fix in replacement DSP board for Emerson make for online UPS of 30 Min backup, three phase, 415 volts 30 KVA Capacity complete all as directed by Engr-in-charge.

Supply and fix in replacement DSP board for Emerson make for online UPS of 30 Min backup, three phase, 415 volts 40 KVA Capacity complete all as directed by Engr-in-charge.

Supply and fix in replacement DSP board for Emerson make for online UPS of 30 Min backup, three phase, 415 volts 15 KVA Capacity complete all as directed by Engr-in-charge.

Supply and fix in replacement Signal Transformer board for Emerson make for online UPS , three phase, 415 volts 20 KVA Capacity complete all as directed by Engr-in-charge.

Supply and fix in replacement Signal Transformer board for Emerson make for online UPS of 30 Min backup, three phase, 415 volts 30 KVA Capacity complete all as directed by Engr-in-charge.

Supply and fix in replacement Signal Transformer board for Emerson make for online UPS of 30 Min backup, three phase, 415 volts 40 KVA Capacity complete all as directed by Engr-in-charge.

Supply and fix in replacement Signal Transformer board Emerson make for online UPS of 30 Min backup, three phase, 415 volts 15 KVA Capacity complete all as directed by Engr-in-charge.

Servicing of LED OT Light shadowless type of any wattage and make of DR Mach LED Light or any other make and setting the OT Light shadowless for proper function including replacing small parts below Rs 600/- and providing servicing certificate by authorised service provider for OT Light complete all as specified and directed. (Note- Spares will be measured and paid seprately).

Supply and fix in replacement Power Supply unit for OT Light of Dr. Mach ( LED 3 SC) and testing for its funtional state and producing test certificate for the same complete all as directed by Engr-in-charge. (Make- Dr. Mach or equivalent.)

Supply and fix in replacement Display unit for OT Light of Dr. Mach ( LED 3 SC) and testing for its funtional state and producing test certificate for the same complete all as directed by Engr-in-charge. (Make- Dr. Mach or equivalent.)

Supply and fix in replacement Sterilizable handle for OT Light of Dr. Mach (LED 3 SC) and testing for its funtional state complete all as directed by Engr-in-charge. (Make- Dr. Mach or equivalent.)

Supply and fix in replacement Cluster board for OT Light of Dr. Mach( LED 3 SC) and testing for its funtional state complete all as directed by Engr-in-charge. (Make- Dr. Mach or equivalent.)

Labour only for attending the fault in online UPS - 5/10/15/20/30/40 KVA of any make and setting the UPS for proper function including replacing small parts below Rs 300/- repairing and blowing out dust from inside the ups complete all as specified and directed.

Supply, lay, test connecting and commissioning underground cable LT 1100 volt grade heavy duty XLPE insulated armoured with aluminum stranded conductor complete laid in trenches/fixed to poles /drawn through pipes with suitable size cable glands crimping type cable lugs etc all as specified and directed of size 10 Sqmm 2 Core, including taking down old unserviceable cable complete all as specified and as directed.

All as per item No- 33.00 above but 16 sq mm 4 core

All as per item No- 33.00 above but 35 sq mm 3.5 core

All as per item No- 33.00 above but 70 sq mm 3.5 core

All as per item No- 33.00 above but 120 sq mm 3.5 core

Supply and fix junction boxes out door type weather proof with fixing accessories made out of moulded PVC size 250x200x80 mm to be fixed at the height of 1 M from bottom of street light pole complete with wiring, arrangement for MS Clamp, cable entery/exit, 01 No. MCB SP 6 Amps, 4 pole connector for fixing cable etc complete all as specified and directed by Engr-in-charge.

Supply and fix in repair 4 Pole Power Contactors - Type MCX 13 AC-1 80 Amps Conforms to IS / IEC 60947-4-1 & IEC 60947-4-1 CAT NO- CS97015 complete all as directed by Engineer-in-Charge (Make : L&T / Havells / HPL)

Supply and Fix in repairs digital voltmeter 0-500 volts square type complete with necessary fixing and 3 nos of CTs all as specified and as directed by Engr-in-charge. (Make: L&T/Siemens/Schneider)

Supply and Fix in repairs digital ammeter 0-100 amps square type complete with necessary fixing and 3 nos of CTs all as specified and as directed by Engr-in-charge. (Make: L&T/Siemens/Schneider)

Supply and Fix in repairs digital ammeter 0-200 amps square type complete with necessary fixing and 3 nos of CTs all as specified and as directed by Engr-in-charge. (Make: L&T/Siemens/Schneider)

Supply and Fix in repairs digital ammeter 0-400 amps square type complete with necessary fixing and 3 nos of CTs all as specified and as directed by Engr-in-charge. (Make: L&T/Siemens/Schneider)

M&L for cleaning of 2/4 pole structure area /sub station /OHR/UG sumps/Pump house surrounding by surface dressing n.exe 15 cm in depth in soft/loose soil including removing shrubs, grass, miniplants and other unwanted materials and levelling and removing the excavated materials n.exc. 50 mtr complete as directed by Engr-in-charge.

M&L for bringing Cable testing van (Fault Finder) for detecting the location of fault in the LT UG cable 1.1 KV of any size complete all as specified and as directed

M&L in replacement for heat shrinkable Straight through jointing kit for LT 1.1 KV XLPE cables 150 to 240 Sqmm 3.5 core including all accessories required. [Make :- Denson/M Seal/Siemens.]

M&L in replacement for heat shrinkable Straight through jointing kit for LT 1.1 KV XLPE cables 50 to 120 Sqmm 3.5 core including all accessories required. [Make :- Denson/M Seal/Siemens.]

M&L in replacement for heat shrinkable Straight through jointing kit for LT 1.1 KV XLPE cables 25 to 35 Sqmm 3.5 core including all accessories required. [Make :- Denson/M Seal/Siemens.]

M&L in replacement for heat shrinkable Straight through jointing kit for LT 1.1 KV XLPE cables 6 to 16 Sqmm 2/4 core including all accessories required. [Make :- Denson/M Seal/Siemens.]

S&F in repair APFC relay 8 step for automatic correction of power factor suitable for 415 volt 3 phase power supply complete with necessary fixing complete as directed by Engr-in-charge. (Make- L&T CAT Part No. - CONM003R or equivalent in ABB/siemens.)

S&F in repair post top lantern pure polyster UV resistant powder coated die cast aluminium housing with PMMA opal diffuser for uniform illumination type 45 W high power LEDs at light source and symetrical light distribution. CAT Part No LP02-501-XXX-57-XX of WIPRO or of equivalent in Bajaj/ Wipro/phillips/HPL specified here-in-after.

M&L for bracket for street light fitting made of GI pipe of suitable size as per fitting size light grade bend to shape not less than 1.2 mtr with 02 Nos of MS clamps fabricated out of MS flat of size 25x4mm or suitable size including nut, bolts, washers etc complete fixed to pole/wall as per directed by Engn-in-charge.

S&F Timelite distribution boards of Indo Asian Cat no-TL032ABO, 32 A 3 pole/230V- with Analog Time Switch(with battery back up) of Indo Asian Cat No-TA926453 of 3 mod DIN Daily 3P Module, 24 hours program, programmable every 15 min, backup of 100 hrs, current capacity 16 A, with 1 changeover (1 CO) and equivalent in HPL/Havells including connecting with street light and testing complete all as directed

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations of poles complete all as specified and directed by Engr-in-charge

M&L for plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in coping, bed block etc including necessary form work complete all as specified and directed by Engr-in-charge

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate etc including necessary form work complete all as specified and directed by Engr-in-charge

S&F in repair PVC insulated sheathed wire with copper conductor flexible 2 core 2.5 sqmm with one core 1.5 sq mm earth wire PVC insulated fixed to FRP junction box of street light fitting with suitable clamp as required for 8.5/9 mtr long pole for fixing to existing pole and conduit including suitable size of lugs for looping all as specified and directed by Engineer-in-Charge.

S&F in repair Capacitor duty Contactors sutable for 5 KVAR capacitor complete all as specified and directed by Engineer-in-Charge. (Make- L&T CAT NO- CS96127 or equivalent in Siemens/Schneider)

S&F in repair Capacitor duty Contactors sutable for 10 KVAR capacitor complete all as specified and directed by Engineer-in-Charge. (Make- L&T or equivalent in Siemens/Schneider)

S&F in repair Capacitor duty Contactors suitable for 20 KVAR capacitor complete all as specified and directed by Engineer-in-Charge. (Make- L&T or equivalent in Siemens/Schneider)

S&F in repair Capacitor duty Contactors suitable for 25 KVAR capacitor complete all as specified and directed by Engineer-in-Charge. (Make- L&T or equivalent in Siemens/Schneider)

Supply and replace door for out door LT pannel made out of CRCA sheet 3.15 mm thick bend on side of match the existing door duly powder coated and with new hinges three to suit any size /shape of pannel all as specified and as directed by Engineer-in-Charge.

S&F in repair on wall/ceiling/panel single core flexible copper conductor PVC insulated and cable 4 sqmm , 1100 volt confirming to IS : 694 connecting to UPS / MCCB / DB and other equipment with lugs, glands and necessary jointing material including taking down old unserviceable cable of any type all as specified and directed.

S&F in repair on wall/ceiling/panel single core flexible copper conductor PVC insulated and cable 6 sq mm , 1100 volt confirming to IS : 694 connecting to UPS/MCCB/DB and other equipment with lugs, glands and necessary jointing material including taking down old unserviceable cable of any type all as specified and directed.

S&F in repair on wall/ceiling/panel single core flexible copper conductor PVC insulated and cable 10 sq mm , 1100 volt confirming to IS : 694 connecting to UPS/MCCB/DB and other equipment with lugs, glands and necessary jointing material including taking down old unserviceable cable of any type all as specified and directed.

M&L for Reinforced concrete pipes, class NP2 with one collar per lengh of pipe of dia 100 mm, full round as specified by Engr-in-charge.

M&L for Reinforced concrete pipes,class NP2 with one collar per lengh of pipe of dia 100 mm ,half round (02 Nos for top & bottom) as specified by Engr-in-charge.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 m in depth for foundation and getting out in Soft /Loose Soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 m in depth for foundation and getting out in Hard/Dense soil complete all as specified and as directed.

Returning filling in incluiding spreading levelling watering and well ramming in layers n.exc 25 mm complete all as specified and as directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.

Taking down carefully from poles defective street light fitting 70/150/250/ 400W HPSV/MH/T5 type or any type from pole/bldg for repairs and refixing the same after replacing defective accessories with new accessories of any type & PVC insulated sheathed copper conductor cable of existing size complete to entire satisfaction of Engr-in-Charge.

M&L for Cutting of branches of tree of various length to keep a clear distance 2 mtr from the Street light pole and depositioning the cut branches upto a distance of 50 mtr away from the LT/HT/ overhead line/ Transformer complete all as spd and directed by engrs in charge. (Note :- Each span between pole to pole shall be measured one job)

M & L for earthing with galvanised steel earth plate electrode 600 x 600 x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to a depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and directed by Engr-in-Charge.

Material and labour for earthling complete with GI plate electrode of size 600 x 600 x 6 mm thick bured directly in ground vertically at a depth not less 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level surrounded from all sides by 1.5 cm thick packed layer of charcoal of dust and common salt filling in alternate layers and making electrode connection by using GI strip of size 32X6 mm by means of bolts nuts check nuts and washers made of brass and earth strip protected by light grade 40 mm dia GI Pipe upto test point and connected to main switch board are main controlled board with provision of GI pipe medium grade 20mm bore for watering including funnel wire mass RCC pit cover and PCC Chamber pit with 1:2: 4 type C2 (including excavation earth work) all as specified and shown on plate No 3 of SSR Part-1.

Supply and fix earth continuity conductor or main earthing GI lead fixed to wall or pole on floor of size 4mm dia steel wire complete all as specified and as directed.

Supply and fix 32x6 mm galvanised iron strip earth continuity conductor on wall /floor and connected to equipment including nut & bolts of suitable size complete all as specified & directed by Engr-In-Charge.

Supply and fixing Bracket Pole Flood Light Fitting round shape suitable for three flood light fitting mounted on 9/11 mtr pole, made of iron bar of suitable size as per existing shape complete all as specified & directed by Engr-In-Charge.

Supply and Fix in replacement of MCCB 63 Amps to 100 Amps,16 KA,3 Pole,415Vcomplete all as specified and directed by Engr-in-Charge. (Make - Legrand / L&T / Siemens)

Supply and Fix in replacement of MCCB 125 Amps,16 KA,3 Pole,415Vcomplete all as specified and directed by Engr-in-Charge. (Make - Legrand/L&T/Siemens)

Supply and Fix in replacement of MCCB 200 Amps,25 KA,3 Pole,415Vcomplete all as specified and directed by Engr-in-Charge. (Make - Legrand/L&T/Siemens)

Supply and Fix in replacement of MCCB 250 Amps,25 KA,4 Pole,415Vcomplete all as specified and directed by Engr-in-Charge. (Make - Legrand/L&T/Siemens)

Supply and Fix in replacement of MCCB 400 Amps,36 KA,3 Pole,415Vcomplete all as specified and directed by Engr-in-Charge. (Make - Legrand/L&T/Siemens)

Supply only 11 KV grade EN- 13319-2000 Rubber insulating seamless rubber Hand safety gloves Item Part No- JG of Jyot manufacturer and equivalent make complete all as specified and directed by Engr-in-Charge.

Supply only 33 KV grade insulating seamless natural latex rubber Hand safety gloves Item Part No- 33kv jyot of Jyot manufacturer and equivalent make complete all as specified and directed by Engr-in-Charge.

S&F LED Fantasy Bollard LB14 of 11 Watt IP 65 protection,corrosion resistance better optics for uniform distribution all as specified and directed by Engn-in-charge. WIPRO cat part no LB14-131-XXX-65-05 or equivalent in Crompton/Bjajaj/ HPL.

M&L for scraping of old paint from the street light steel tubular pole 8.5/ 9/11 mtr long without removing accessories and preparation of surfaces for repainting. Repainting the pole with two coat of alumimium paint including clamps GI bracket etc and writing pole no with black paint as specified by Engr-in-charge all as required at site or directed.

Supplying and fixing LED light fitting,1X20 Watt surface mounted Trim LED high efficiency LED luminare aluminum linear batten ingress protection : IP66 with white acrylic cover comprises pre-wired with high efficiency electronic driver,high trnslucent frosted diffuser gets glare free, smooth light distribution complete all as specified and as directed. (Make -Wipro cat No- LL20-281-XXX-65AL1 OR equivalent in Havells/HPL.)

Supply & lay GI tubing ''light grade'' 50 mm for protection of cable and fixing to existing pole with flat iron clamp 25x3 mm OR suitable size as per existing pole including nut bolts and washer etc of size 50 mm bore complete all as specified and as directed

Supply & lay GI tubing ''light grade'' for protection of cable and fixing to under road/culverts of size 40 mm bore complete all as specified and as directed

Supply & fix GI tubing 50 mm bore ''light grade'' for post top lantern of 2.25 mtr length including PCC foundation and fixing of post toplantern, nut bolts and washer etc and connecting with electrical supply complete all as specified and as directed by Engineer-in-Charge

Design, supply,install, test and comissioning of free standing floor mounted, dust and vermin proof Automatic power factor control panel 100 KVAR out door installation factory made both front and rear side double door system, fabricated with 3.15 mm thick CRCA sheet for load bearing members and 2 mm thick for doors and covers and shall be painted with epoxy powder paint by means of electro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall consist of 400 ,Amps rating TPN bus bars of high conductivity aluminium alloy and shall be provided with colour coded heat shrinkaable sleeves,with more depth for accomodating Capacitor bank 08 Nos inside of the panel. [Item No. 92.00 Contd...]

[Item No. 92.00 Contd...] The panel shall be modular/cubical trype with bus chamber cable allyand provided with separate fully compartments for each switch including instrumentation such as Ampere Meter, Volt meter, Phase indicating lamp with double stud hinged door , front and rear openable with locking arrangement and suitable for 1100 Volts grade , 3 phase 415 Volts , 50 cycles , AC Supply and to with stand short circuit fault level of not less than 10 KA and degree of protection shall be IP 54 . The panel shall be fixed with angle iron frame made of angles of size 50x50x6 mm , embedded 200 mm below ground level in PCC 1:2:4, Type B1 using 20 mm grade stone aggregate , 600 mm above ground level and comprising the following including taking out of old panels etc , removing of cables and connecting to new panels with all required material such as glands, lugs etc

Design, supply,install, test and comissioning of free standing floor mounted, dust and vermin proof Automatic power factor control panel 150 KVAR out door installation factory made both front and rear side double door system, fabricated with 3.15 mm thick CRCA sheet for load bearing members and 2 mm thick for doors and covers and shall be painted witrh epoxy powder paint by means of electro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall consist of 400 ,Amps rating TPN bus bars of high conductivity aluminium alloy and shall be provided with colour coded heat shrinkaable sleeves,with more depth for accommodating Capacitor bank 10 Nos inside of the panel. [Item No. 93.00 Contd.....]

[Item No. 93.00 Contd.....] The panel shall be modular/cubical type with bus chamber cable allyand provided with separate fully compartments for each switch including instrumentation such as Ampere Meter, Volt meter, Phase indicating lamp with double stud hinged door , front and rear openable with locking arrangement and suitable for 1100 Volts grade , 3 phase 415 Volts , 50 cycles , AC Supply and to with stand short circuit fault level of not less than 10 KA and degree of protection shall be IP 54 . The panel shall be fixed with angle iron frame made of angles of size 50x50x6 mm , embedded 200 mm below ground level in PCC 1:2:4, Type B1 using 20 mm grade stone aggregate , 600 mm above ground level and comprising the following including taking out of old panels etc , removing of cables and connecting to new panels with all required material such as glands, lugs etc

S&F Mild steel plates chequered 5 mm thick of size Fe-410 W (Gde-E-250) quality B complete all as directed and specified.

Supply and fix MCB TP 63 Amps, 415 volts complete all as specified and as directed

Supply and fix MCB TP 40 Amps, 415 volts complete all as specified and as directed

M&L for single pointed air termination aluminium rod, 12 mm dia, 300 mm long and tightening with screws complete all as specified and as directed

M&L for Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground

Test point terminal block made of gun metal or phosphorus bronze size 75X75X25mm drilled and screwed including 3 Nos 8mm dia 25mm long hex head screw.

S&F in repair Heavy duty capacitors bank Box series LTBCH 5 KVAR for automatic correction of power factor suitable for 415 volt 3 phase power supply complete with necessary connection and replacing the unsv capacitor bank of any type complete as directed by Engr-in-charge. (Make :- L&T or equivalent in ABB / Siemens)

S&F in repair Standard duty capacitors bank with inbuilt MCB and LED indication 10 KVAR for automatic correction of power factor suitable for 415 volt 3 phase power supply complete with necessary connection and replacing the unsv capacitor bank of any type complete as directed by Engr-in-charge. (Make- L&T Cat no-LTBCM310B2 or equivalent in ABB / Siemens)

S&F in repair Standard duty capacitors bank with inbuilt MCB and LED indication 20 KVAR for automatic correction of power factor suitable for 415 volt 3 phase power supply complete with necessary connection and replacing the unsv capacitor bank of any type complete as directed by Engr-in-charge. (Make :- L&T Cat no-LTBCM320B2 or equivalent in ABB / Siemens)

S&F in repair Standard duty capacitors bank with inbuilt MCB and LED indication 25 KVAR for automatic correction of power factor suitable for 415 volt 3 phase power supply complete with necessary connection and replacing the unsv capacitor bank of any type complete as directed by Engr-in-charge. (Make :- L&T Cat no-LTBCM325B2 or equivalent in ABB / Siemens)

Design, supply,install, test and comissioning of free standing floor mounted, dust and vermin proof LT Panel of suitable size for out door installation factory made both front and rear side double door system, fabricated with 3.15 mm thick CRCA sheet for load bearing members and 2 mm thick for doors and covers and shall be painted witrh epoxy powder paint by means of electro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall consist of 600 ,Amps rating TPN bus bars of high conductivity aluminium alloy and shall be provided with colour coded heat shrinkaable sleeves,with 600 mm depth of the panel. [Item No. 104.00 Contd.....]

[Item No. 104.00 Contd.....] The panel shall be modular/cubical trype with bus chamber cable allyand provided with separate fully compartments for each switch including instrumentation such as Ampere Meter, Volt meter, Phase indicating lamp with double stud hinged door , front and rear openable with locking arrangement and suitable for 1100 Volts grade , 3 phase 415 Volts , 50 cycles , AC Supply and to with stand short circuit fault level of not less than 10 KA and degree of protection shall be IP 54 . The panel shall be fixed with angle iron frame made of angles of size 50x50x6 mm , embedded 200 mm below ground level in PCC 1:2:4, Type B1 using 20 mm grade stone aggregate , 600 mm above ground level and comprising the following including taking out of old panels etc , removing of cables and connecting to new panels with all required material such as glands, lugs etc

INCOMING :- (a) MCCB 4 pole 400 Amps capacity rup cap 36 KA at 415 volt 50 Hz AC fixed thermal magnetic release type and earth leakage protection ICS =100% ICU with rotary handle - 01 No incoming OUTGOING :- (a) MCCB 4 pole 200 Amps capacity rup cap 25 KA at 415 volt 50 Hz AC fixed thermal magnetic release typewith rotary handle - 01 Nos Out going (b) MCCB 3 pole100 Amps capacity rup cap 16 KA at 415 volt 50 Hz AC fixed thermal magnetic release type with rotary handle - 02 Nos Out going (c) MCCB 3 pole 63 Amps capacity rup cap 16 KA at 415 volt 50 Hz AC fixed thermal magnetic release type with rotary handle - 02 Nos Out going (d) LT Danger notice plate -01 No (e) Panel Control wiring complete with suitable size copper conductor cable and suitable size gland for LT cables

Design, supply,install, test and comissioning of free standing floor mounted, dust and vermin proof LT Panel of suitable size for out door installation factory made both front and rear side double door system, fabricated with 3.15 mm thick CRCA sheet for load bearing members and 2 mm thick for doors and covers and shall be painted witrh epoxy powder paint by means of electro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall consist of 600 ,Amps rating TPN bus bars of high conductivity aluminium alloy and shall be provided with colour coded heat shrinkaable sleeves,with 600 mm depth of the panel. [Item No. 105.00 Contd....]

[Item No. 105.00 Contd....] The panel shall be modular/cubical trype with bus chamber cable allyand provided with separate fully compartments for each switch including instrumentation such as Ampere Meter, Volt meter, Phase indicating lamp with double stud hinged door , front and rear openable with locking arrangement and suitable for 1100 Volts grade , 3 phase 415 Volts , 50 cycles , AC Supply and to with stand short circuit fault level of not less than 10 KA and degree of protection shall be IP 54 . The panel shall be fixed with angle iron frame made of angles of size 50x50x6 mm , embedded 200 mm below ground level in PCC 1:2:4, Type B1 using 20 mm grade stone aggregate , 600 mm above ground level and comprising the following including taking out of old panels etc , removing of cables and connecting to new panels with all required material such as glands, lugs etc

INCOMING :- (a) MCCB 4 pole 400 Amps capacity rup cap 36 KA at 415 volt 50 Hz AC fixed thermal magnetic release type and earth leakage protection ICS =100% ICU with rotary handle - 01 No incoming OUTGOING :- (a) MCCB 4 pole 250 Amps capacity rup cap 25 KA at 415 volt 50 Hz AC fixed thermal magnetic release typewith rotary handle - 01 Nos Out going (b) MCCB 3 pole 125 Amps capacity rup cap 25 KA at 415 volt 50 Hz AC fixed thermal magnetic release type with rotary handle - 01 Nos Out going (c) MCCB 3 pole 63 Amps capacity rup cap 16 KA at 415 volt 50 Hz AC fixed thermal magnetic release type with rotary handle - 02 Nos Out going (d) LT Danger notice plate -01 No (e) Panel Control wiring complete with suitable size copper conductor cable and suitable size gland for LT cables

S&F LED light fitting,1X18 Watt surface mounted Trim LED NEO high efficiency LED luminare SUITABLE FOR INDOOR APPLICATIONS ingress protection : IP66 with white acrylic cover comprises pre-wired with high efficiency electronic driver,high trnslucent frosted diffuser gets glare free,smooth light distribution. (Make -Wipro cat No- LL20-221-XXX-65NE OR equivalent in Havells/HPL)

Attending day today complaints of street light / flood light of any make/type/ capacity and repairing for proper functioning including replacing small parts. One electrician to be present daily during the contract period for attending the complaints of street light / flood light or any emergent complaints assigned for complete period of contract complete all as specified and directed.

Attending the fault in APFC panel upto 200 KVAR including repairing of APFC relay, Contactor of any make/capacity, digital lamp,switch and setting the APFC panel for proper function, testing connection of capacitor bank of any capacity including replacing small parts below Rs 500/- .repairing and blowing out dust from inside the APFC panel complete all as specified and directed. [NOTE FOR ITEM NO - 107 & 108 Minimum one electrician to be present daily during the cotract period for attending complaints of street lights/Flood lights/ APFC panel fault and nreplacement of connected items or any emergent complaint. If found absent Rs 1500 will be deducted daily.]

metro electrical services