Repairs and maintenance to chamber of Sr GM HR and A at 3rd floor and GM S and M at 4th floor in BSNL Bhawan Panbazar Guwahati

Amount

Providing and fixing plain multipurpose cement board (High pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid separately).

(a) 6 mm thick Cement fiber board or nos asbestos cement board

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

(a) Two coats.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

(a) Two or more coats on new work.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

(a) Semi rigid pipe (i) 32 mm dia

Providing and fixing uplasticised PVC connection pipe with brass unions :

(a) 45 cm length (i) 15 mm nominal bore

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

(a) White solid plastic seat with lid.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 231, with all fittings and fixtures omplete.

(a) 10 litre capacity - White

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931.

(a) 15 mm nominal bore.

Providing and fixing C.P. brass stop cock of standard design and of approved make conforming to IS:8931.

(a) 15 mm nominal bore.

Removing and refixng of existing verticle blinds including repairs to runners and hooks, control threads and providing missing weights and clips etc and using available verticle fabric strips including necessary screw and rawal plug all complete as directed by the Engineer in charge

Easing the aluminium framed casement window shutter by cleaning the friction hinge with wire brush and oiling and greasing and cleaning the glass all complete including tightening of screw if needed all complete as directed by the engineer in charge

Floor polishing of mosaic tiles/ cast in situ flooring , kota stone flooring , marble flooring, skirting ,Steps and risers by machine inclding Cleaning floors, etc. to remove all the stain and dirt from the floor cost of all material required to complete as per directiction of Engineer in charge.

Cleaning of glazed tiles and plastic door manually or by using hand held machine with soft scrubber attached etc. to remove all the stain and dirt from the surface including cost of all material required to complete as per directiction of Engineer in charge.

Providing and fixing C.P. brass 2 way bib cock of Parry ware make preferably COP-041PM 2-way Bib Cock

(a) 15 mm nominal bore.

Providing and fixing premium quality Crome plated brass pillar cock of Parry ware or equivalent of approved quality to wash basin including cost of removing the damaged item all complete as directed by the engineer in charge,

(a) 15 mm nominal bore.

Providing and fixing Health faucet sprey of pary ware or equivalent with S.S coloured flexible tube minimum 1.0 metre long to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

(a) 15 mm nominal bore.

Providing and fixing 1.50 mm thick homogeneous Polyvinyl chloride sheet flooring in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer like Dunlop S-758 , Fevicol SR 998 or equivalent including rolling with light wooden roller weighing about 5 Kg. all complete as directed by Engineer-In-Charge, in approved colour and shade

Dismanteling termite eaten cupboard (@ 4 nos) of size @ 1.5x0.7 meter and its shelf and disposing it in nearby muncipal dump all complete as directed by the engineer in charge