REPAIR/MAINTFOR INTERNAL ELECTRIC SUPPLY AND REPAIR/MAINT OF INTERNAL WIRING FOR MD/OTM ACCN AT AJMER MIL STN AND WELCOME MAINT AND MISC REPAIR TO PLASTER FLOORING, SANITARY FITTING, SUNKUN TREATMENT JOINERY ETC IN MD ACCN UNDER AGE B/R I AT GE NASIR

Amount

Taking down carefully aluminium/copper point wiring (light,fan,socket or power) of any type complete including fittings and fixtures such as switches,ceiling roses, pendants, holders , sockets, light fittings, removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls/ceiling/floor at various site etc, complete all as specified and directed by Engr-in-Charge.

Disconnecting of unserviceable sub main wiring of 4 Sqmm size including conduit of any type and accessories & removing from site and making good the disturbed surfaces, complete all as specified and directed by Engr-in-Charge.

Disconnecting of unserviceable sub main wiring of 6 Sqmm size including conduit of any type and accessories & removing from site and making good the disturbed surfaces, complete all as specified and directed by Engr-in-Charge.

Disconnecting electric connections and taking down old unserviceable MCB DBs of any type including MCBs DB/TPN DBs including mcbs of any capacity, complete all as specified and directed by Engr-in-Charge.

Taking down carefully by unscrewing from boards / outlet boxes, light fittings and fixtures such as tube light fittings, bulk head fittings, mirror light, bldg sec light etc for re use at site or carrying to the store ( To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including non metallic rigid PVC concealed conduit 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised teRminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Engr-in-Charge of following.

One light point/bell point controlled by one way 5 Amps single pole switch, complete all as specified and directed.

One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch, complete all as specified and directed.

One 5 pin 5 Amps socket outlet on same board with other switch, complete all as specified and directed.

One 5 Pin 5 Amps socket outlet on independent board with other switch, complete all as specified and directed.

One light point controlled by two, 2-way switches complete all as specified and directed.

Ditto all as per item No 6.00 above but with 2.5 Sqmm single core multi stranded PVC insulated unsheathed (FRLS) cable for 15 Amp socket outlet on independent board, complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including PVC casing & caping with all PVC casing caping accessories and sunk type pressed steel anodised teRminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Engr-in-Charge of following.

One light point/bell point controlled by one way 5 Amps single pole switch, complete all as specified and directed.

One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch, complete all as specified and directed.

One 5 pin 5 Amps socket outlet on same board with other switch, complete all as specified and directed.

One 5 Pin 5 Amps socket outlet on independent board with other switch, complete all as specified and directed.

Ditto all as per item No 8.00 above but with 2.5 Sqmm single core multistranded unsheathed (FRLS) cable for 15 Amp socket outlet on independent board, complete all as specified and directed.

Supply and fixing of switch piano type, flush button single pole, one way 5 Amps, complete all as specified and directed.

Supply and fixing of switch piano flush type, 5 Amp , 240 volt , single pole, two way switch, complete all as specified and directed.

Supply and fixing of switch piano flush type 15/16 amps, single pole one way 240 volts complete all as specified and directed.

Supply and fixing of switch bell push, flush type, 5 Amp, complete all as specified and directed.

Supply and fixing of socket outlet 5 Amps, 5 Pin, flush type, complete all as specified and directed.

Supply and fixing of socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type complete all, as specified & directed.

Supply and fixing stepped type ( switch type) electronic ceiling fan regulator flush type, AC, 230 volts , complete all as specified and directed.

Supply and fixing of ceiling rose,surface type bakelite 65x17.5 mm, three teRminals, complete all as specified and directed.

Supply and fixing of door bell electric, ding dong type, AC 230 volts, single phase , complete all as specified and directed.

S&F of lamp holder PVC/polycarbonate type with back plate complete all as specified and directed.

S&F in repair LED tube light fitting in acrylic linear tube (1x 18 watt),230V for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed.

Supply and fixing in repair LED mirror light fitting, 10 watt, 600 mm length complete with all accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing in repair LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including connecting up with three core copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing in repair testing and commissioning energy saving bldg sec light luminaire 35 watt LED , pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete, IP 66/65 protection incl connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing recess mounted LED edge lit slim downlight 12 watt round shaped ,die-cast aluminium housing finished in white powder coating incl driver, efficiency 100 Lm/w complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair recess mounted 2' x 2' LED luminarie 36 watt, cool day/waRm white light with white powder coated CRCA housing with LED driver, efficiencey >100 Lm/w complete all as specified and directed.

M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 6 Sqmm multi stranded copper conductor cable drawn through and including 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of green colour earth continuity conductor with 6 Sqmm multi stranded copper conductor cable, in concealed conduit in wall/ roof/ ceiling, complete all as specified and directed. Note : - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 6 Sqmm multi stranded copper conductor cable drawn through existing concealed conduit incl one run of green colour earth continuity conductor with 6 Sqmm multi stranded copper conductor cable complete all as specified and directed. Note : - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 4 Sqmm multi stranded copper conductor cable drawn through existing concealed conduit incl one run of green colour earth continuity conductor with 4 Sqmm multi stranded copper conductor cable complete all as specified and directed. Note : - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

S & F of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' Type instantaneous tripping complete all as specified and directed.

Supply and fixing of MCB SPN 10 to 40 Amp capacity, 10KA , 'C' Type instantaneous tripping complete all as specified and directed.

Supply and fixing of MCB SPN 63 Amp capacity, 10 KA , 'C' Type instantaneous tripping complete all as specified and directed.

Supply and fixing of MCB TPN 63 Amp capacity,415 volt 10 KA , 'C' Type instantaneous tripping complete all as specified and directed.

Supply and fixing of MCB TPN 100 Amp capacity, 415 volt, 10 KA , 'C' Type instantaneous tripping complete all as specified and directed.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 8 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.Note : MCB DB and MCB will be the same make.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 12 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Note : MCB DB and MCB will be the same make.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 4 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Note : MCB DB and MCB will be the same make.

S&F of MCB distribution board triple pole & neutral IP-43 double door metal, 4 way ,415 volt made out of CRCA sheet steel , factory made powder coated with insulated bus bars , shrouded neutral bars, earth bars , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCB's complete all as specified and directed. Note: MCB DB and MCB SP/SPN will be the same make.

M & L for earthling complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below noRmal ground level) with top edge of the plate not less than 1.5 mtrs below noRmal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note. The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level.

Supply and fix in replacement of LED Post top light fitting 40 Watt / 50 Watt, made in die-cast aluminum housing with decorative clear opal acrylic diffuser, IP 65 protection, spun aluminum powder coated canopy, low power WaRm White (WW) LEDs connected in series and parallel combination with better heat dissipation arrangement with LED color temperature- 3000K ±300K, Highly efficient constant current electronic driver having operating voltage range from 140-280 Volt AC, provided with high voltage, open and short circuit protection, Voltage surge protection 5KV complete suitable for up to 60mm OD pipe entry with fixing bolts including taking down existing unserviceable post top light of any description complete all as specified and directed by Engineer-in-Charge. Note :- LM 79 test report, LM 80 report with minimum 9000 hrs testing to support 50K life TTC and dirver NABL accreditated report shall be submitted before execution of work to the Engineer - in - charge.

S & F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C' type instantaneous for geyser & AC complete all as specified and directed.

M & L for preparation of old decorated plaster or un- plastered surfaces and providing one coat of white wash on wall including cornices, complete all as specified and directed.

M & L for preparation of old decorated plaster or un- plastered surfaces and providing one coat of white wash on ceiling, complete all as specified and directed.

M & L for washing, rubbing down, preparing and stopping of old distempered surfaces, removing nails, making good holes, cracks etc and applying one coat of oil bound distemper on wall white or tinted, complete all as specified and directed.

M & L for complete removal of existing treatment of old plastered surface of wall and applying two coat of distemper oil emulsion / oil bound distemper over coat of 1mm thick average thick wall putty, complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of approved quality, tint to achieve glossy finish, complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of approved quality, tint to achieve glossy finish, complete all as specified and directed.

M & L for washing, rubbing down, preparing and stopping of old painted surfaces, removing nails, making good holes, cracks etc and applying one coat of cement base paint, complete all as specified and directed.

M & L complete removal of existing treatment and applying two coats of weather proof acrylic emuslion paint over a coat of 1mm thick wall care putty & including a coat of emulsion wall primer all as per manufacture's instructions & as directed by Engr -in-Charge. Make :- Asian / Apex / Berger (Wheather coat All Guard).

M & L for complete removal of existing treatment and preparation of old surface of Manglore tile and applying two coats of terracotta roof paint /Apex wheather coat complete all as specified and directed.

Taking down cement plastering of any description on brick / stone/ concrete wall / ceiling surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiles/stone slab including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed.

Demolition of brick or stone Masonary built in cement mortar etc complete all as specified and directed.

Demolition of cement concrete (unreinforeced) in ground floors and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed.

Hacking out old broken glass (any size, quality or description) from metal frames, glazing with putting or beads andS & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.m in Each pane complete all as specified and directed.

Hacking out old broken glass (any size, quality or description) from metal frames, glazing with putting or beads andS & F 3mm thick figured glass panes , ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.m in Each pane complete all as specified and directed.

Taking down chowkats or frames not exc 1.5Sqm Each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts complete all as specified and directed.

Taking down chowkats or frames exc 1.5Sqm and not exc 4.0 Sqm Each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts complete all as specified and directed.

Taking down shutters of any description exc 1.0Sqm and n. exc 2.00 Sqm Each shutter complete all as specified and directed.

M & L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M & L 10mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed.

M & L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement on fair faces of brick work or concrete surfaces, finished even and smooth complete all as specified and directed. (Note:-WPC measured and paid separately) .

M & L for rough cast plaster over 10mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces complete all as specified and directed.

M & L for walling Random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed.

M & L for walling Random rubble masonary( but except stone) uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed.

M & L for old size brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M & L for brick work with flyash bricks, straight or curved on plan exc 6M mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismantling loose /disintegrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and dobbing out with PCC 1:1:5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces of reinforcement and provision of necessary supporting foRm work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed.

M & L 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed.

M & L non skid ceramic coloured tiles 7 to 8mm thick area of Each tile exceeding 0.18 Sqm but not exc 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.

M & L non skid ceramic coloured tiles 7 to 8mm thick area of Each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.

M & L for vitrified ceramic tiles light shade 8-10mm thick (square / rectangular ) polished, area of Each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M & L for vitrified ceramic tiles light shade 8-10mm thick (square / rectangular ) polished, area of Each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed.

M & L Glazed ceramic coloured tiles 7 to 8 mm thick in vertical surfaces area of Each tile of exc. 0.11 Sqm and but not exc. 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.

All as per item No. 69 & 70 (for Non Skid Tile) above but in skirting over 10mm thick screeding in cement mortar 1:4 complete all as specified and directed.

M & L for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window -cills, cooking platfoRms and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding of edge laid over 15mm thick screed bed in CM (1:6) including rounding of edges of stone slabs one edge, complete all as specified and directed.

M & L for rolled mild steel work as in door frame (chowkhats) including provn of 10mm dia defoRmed bar welded horizontally to bottom of frame confoRming to Fe-290 (Gde 165-E) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

S & F Plain, solid, straight chowkats in 2nd class wood and framed rebates on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement complete all as specified and directed.

S & F Mild steel hold fasts fixed with MS screws, all confoRming to Fe410-0 complete all as specified and directed.

Raking out joint /pointing to random rubble or polygonal rubble stone masonary uncoursed or brought upto courses built in cement mortar and M & L for raised pointing in cement mortar (1:4) complete all as specified and directed.

M & L for taking down shutters of any description exc 1.00 Sqm but n. exc 2.00 Sqm of Each shutter and refixing in the same opening after necessary resecuring or easing & adjusting etc complete all as specified and directed.

M & L for taking down shutters of any description exc 2.00 Sqm of Each shutter and refixing in the same opening after necessary resecuring or easing & adjusting etc complete all as specified and directed.

S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35mm thick 2nd cl HW glazed and skeleton shutters open rebated and prepared to receive glass/wire cloth gauge etc,(without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part I, sectiion 8, clause 8.24(a) complete all as specified and directed.

S & F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet uses instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed.

S & F factory made solid PVC moulded door shutter with wood free EPS, 28to30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded Prelam (Nut Brown Colour )PVC sheet on the front face & 2mm Prelam (Nut Brown colour ) PVC sheet on back face, and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part -II) 2010 complete all as specified and directed.

S & F in repair Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.

Supply and fixing in repairs 18/19mm thick prelaminted partcile board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws, including teak wood lipping 19x6mm thick fixed with nails in shelves, partition and pelmet boxes, cupboard shelves etc complete all as specified and directed.

S & F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy complete all as specified and directed.

S & F in repair Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy complete all as specified and directed.

S & F MS butt hinges, medium weigh, cold rolled, ISI marked of size 125mm, incl necessary welding/bolting complete all as specified and directed.

S & F in repair MS butt hinges, medium weigh, cold rolled, ISI marked of size 125mm, incl necessary welding/bolting complete all as specified and directed.

S & F 150mm long aluminium anodised barrel tower bolt of extruded section all as specified and directed.

S & F in repair 150mm long aluminium anodised barrel tower bolt of extruded section all as specified and directed.

S & F 150mm long extrueded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F in repair 150mm long extrueded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed tinned or stainless steel wire staple complete all as specified and directed.

S & F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed tinned or stainless steel wire staple complete all as specified and directed.

S & F in repair floor door stopper over all length of cover plate 140mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floors etc complete all as specified and directed.

S & F Mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete.

S & F in repair hasp and staple of size 100mm aluminium safety type including bolt to hinge plate and fixing screw etc complete all as specified and directed.

S & F in repair mild steel chromium plated curtain rod powder coated 25 mm dia incl fixing of brackets etc complete all as specified and directed.

Supply and fixing in repairs Knobs for existing rod mild steel chromium plated powder coated complete all as specified and directed.

Dismantling of existing unserviceable RCC/PVC water tank and S & F 500 litre capacity rotational moulded polythene water storage tanks double layer (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed.

Dismantling of existing unserviceable RCC/PVC water tank and S & F 1000 litre capacity rotational moulded polythene water storage tanks double layer (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed.

S & F in repairs Squatting pattern Water closet, Orissa pattern of vitreous chinna Size 580x440mm wide with integral foot rest etc complete all as specified and directed.

S & F in repairs vitreous china One piece EWC with slim soft close seat cover including good making, etc complete including making good to floor etc complete all as specified and as directed. Make Cat No. : S1013210 or equivalent)

S & F in repair wash basins vitreous china, white /coloured flat back size 550 x400mm fixed including bracket complete all as specified and directed.

Demolition of cement concrete of any description from sunken floor (ground or Ist floor) and removing and depositing materials exc 50 mtrs depositing level n exc. 1.5 m aove the starting point complete all as specified and directed.

M & L for mass concrete filling using PCC (1:5:10) type E2 in sunken floor complete all as specified and directed.

M & L for 20mm thick cement plaster in CM 1:4 mixed with water proofing compound @ 3% and applying water proofing treatment on sunken portion with acrylic based polymer modified cementitious composit compound as specified and approved & cement slurry two layers, Ist layer @ 0.488 Kg/Sqm mixed with composit compound @ 0.253 Kg/Sqm & the second layer slurry @ 0.242 kg/Sqm mixed 0.126 Kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200 u polyfilm with adhesive.

M & L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 50mm thick as in plinth protection finished fair & even in alternative bays n. exc 2M in length and joints filled with butmen mastic 1:3 (1 Bitumen : 3 Sand) complete all as specified and directed.

S & F in repair PVC low level flushing cistern syphonic action type white with inlet ball valve, handle including brackets 10 ltrs capacity etc complete all as specified and directed.

S & F in repair PVC flush pipe bend 32mm dia with two nos check nuts for connecting low level flushing cistern to European type WC or IWC including all joints complete all as specified and directed.

S & F in repair CP brass shower rose with or without swivel joints 100mm size including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc complete all as specified and directed.

S & F in repair pillar tap, cast copper alloy fency type chromium plated screwed down high, pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipe complete all as specified and directed.

S & F in repair angle valves 15mm bore , cast copper alloy chromium plated fancy type, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

S & F in repair 25mm bore Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe fixed complete all as specified and directed.

S & F in repair 32mm dia PTMT waste pipe suitable for WHB or Sinks etc complete all as specified and directed.

S & F in repairs grating round 140mm dia PTMT minimum weight 50 gms fixed to Floor trap/Nahni trap with CM 1:6 etc complete all as specified and directed.

S & F in repair bib tap standard of PTMT 15mm bore of any colour screwed for iron pipe and fixed complete all as specified and directed.

Supply and Fixing in repair plastic water closet seat cover any colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete all as specified and directed.

S & F in repair stainless steel sinks with draining board made of 1mm thick sheet with over all size 915mm x 460mm and bowl size 410mmx330x160mm for kitchen or laboratory with pluge washers and waste, including bedding in cement mortar on to dwarf walls or including fixing centilever bracket and connecting uinon to waste pipe complete all as specified and directed.

Supply and fixing in repairs stainless steel plate rack of size 914 x 609 mm or equivalent in jayna/Nirali as approved by GE complete all as specified and directed.

S & F in repairs waste coupling CP 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed.

S & F in repairs 15mm bore cast copper alloy chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

S & F in repairs PVC (SWR) floor trap plain with grating incl jointing with solvent cement of 75mm dia complete all as specified and directed.

S & F in repair tubular towel rail, chromium plated brass 20mm dia 'D' type 60CM long between flanges complete all as specified and directed.

S & F in repairs for Toilet fittings chromium Coated towel rack 600mm long without lower Haners but three hooks complete all as specified and directed.

Supply and fixing in repairs 15mm bore brass CP mixer valve wash basin for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repairs for Toilet fittings Corner Glass shelf with bracket complete all as specified and directed.

S & F in repairs for Toilet fittings Wall mixer (wall mounted model) with 1.5m flexible tube and hook complete all as specified and directed.

S & F in repairs for Toilet fittings Teliphonic shower with 1.5 mtr long flexible tube & swivel wall hook complete all as specified and directed.

S & F in repairs for Toilet fittings Health faucet complete all as specified and directed.

S & F in repairs PVC cabinet of size 450 mm x 600 mm with mirror of good quality with shelves in bath fixed complete to walls complete all as directed.

S & F in repairs for Toilet fittings Two way bib cock of 15mm bore complete all as specified and directed.

Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.

Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.

Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.

S & F 15mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed.

S & F 20mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed.

S & F 25mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed.

Refixing old 15mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed.

Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed.

Refixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Taking down the existing material andS & F Mild Steel handle right or left suitable for Mild Steel window duly painted with two coats of stove enamelled paint etc.complete all as specified and directed.

M & L 2nd class HW palin fillets square, rectangular or triangular exc 6 & n. exc 13 sqcm in section, clean sawn, secured with nails complete all as specified and directed.

S & F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F in repairs 75mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed.

S & F in repairs 110mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed.

S & F in repairs 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed.

S & F in repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm average thick wall care putty, complete all as specified and directed.

M & L for preparation of newly plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

M & L for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for prepartion of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S & F in repair Jet flush including plate & connection pipe complete all as specified and directed.

M & L for machine cut Kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified and directed.

Only on old surfaces mirror polishing on marble/granite/kota stone where ever required to give high gloss finish complete all as specified and directed.

M & L ENDURA MAXGRIP FLOOR TILES– 30*30CM, 60*60CM in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. (Make : Johnson and equivalent)

M & L for crack repair in wall, ceiling and roof with CM 1:3 mixed with water proofing compound @3% by weight of cement, width of crack is 25mm and 50mm deep including necessary demolition and making good disturbed surface complete all as specified and directed. Note :- WPC measured and paid separately

Fabrication & fitting of kitchen with cabinet/shelves & wardrobe/cupboard made out of 18mm thick (one side decorative lamination & other side baancing lamination) PVC sheet with piano hinges including providing cabinet for keeping baskets / cutlery baskket with handles/door shutters complete all as specified and directed. Note :- PVC sheet, fitting & fixture will be measured and paid separately as supply only.

Supply only in repairs 18mm thick (one side decorative lamination & other side baancing lamination) solid PVC board with cement solvent adhesive for shutter/kitchen cabinet / cup board/partition wall/ wall cabinet complete all as specified and directed. Make :- Raj shree or equivalent as approved by GE.

Supply only soft close clip on hinge bright finish complete all as specified and directed.

Supply only 125 mm dia oval shape brass handle fancy type bright finish complete all as specified and directed.

Supply only in repair stainless steel innotech basket of approved quality of size 520 X 485 X 100mm complete all as specified and directed. Make :- Godrej SS 304

Supply only in repair stainless steel innotech basket of approved quality of size 520 X 485 X 200mm complete all as specified and directed. Make :- Godrej SS 304

Supply only basket / trolly channel 50cm long extruded MS galvanised over roller complete all as specified and directed.

S & F in repair Soap dish any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed.

S & F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S & F continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 40 mm complete all as specified and directed.

S & F in 50 mm dia polished hardwood knobs fixed with screws complete all as specified and directed.

M & L for bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5 Kg per sq m per coat and applying plythene film black, 50 micron laid in floors complete over sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed. Note :- Supply of water proofing compound shall be measured and paid separately.

M & L PCC (1:5:10) type E-2 using 40mm graded crushed stone aggregate as in sunken floors complete all as specified and directed.

KIRTIMAN ENTERPRISES (BID ID -3429485)

KIRTIMAN TRADERS (BID ID -3429756)