Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.4 LAdmitted-Finance 5 49 SUBASH NAGAR BEHIND SBI UDHAMPUR J K 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Admitted-Finance | |
| 2 | L2₹23.8 L+₹36,479 (1.56%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | Rejected-Technical | - | Rejected-Technical Disqualified |
| Sl No | Description | Qty | Unit | V-RIDGE ENGINEERING WORKS. L1 | M/S JCM CONSTRUCTIONS L2 |
|---|---|---|---|---|---|
| 1.00SITC OF 110 V BATTERY Charger,110V DC Distribution Panel, 415V AC Distribution Panel and 100KVAServo Stablizer. | |||||
| 1.01 | 110 V Battery charger ( 3Phase)Float charging and load current rating 30Amp/60Amp/70Amp/100Amp at 220Vto 252VD.C (II) Boost charging current rating:50amp/55amp/60amp/70a/80a/100a at 198V to 296/302v DC and as per site incharge | 1 | Nos | 3,25,000 ₹3,25,000 | 3,00,000 ₹3,00,000 Lowest |
| 1.02 | DC Distribution Panel (110V, DC) with 3 outgoing No.20Amp. Air break ckt. Double pole for battery incoming supply with DP MCBs(as per site requirements) & indicating Lamps etc.DC Distribution Board frames shall be fabricated using mild steel structural section or pressed and shaped Cold rolled sheet steel of thickness not less than 2.0 mm and shall be provided with a degree of protection of IP-52 as per IS:2147, bus bar chamber having a degree of protection of IP-42 as per IS:2147. Finishing paint on panels shall be of shade 692 (smoke grey) of IS: The inside shall be properly stoved. The paint thickness shall be at least 50 microns. Bus bars and jumper onnections shall be of high conductivity copper of adequate size of following specifications with Main 20Amp- 3no., DC Change over switch , outgoing 6 Amp 18 No. and DC Digital Voltmeter 1No and as per site incharge | 1 | Nos | 2,98,000 ₹2,98,000 | 2,25,000 ₹2,25,000 Lowest |
| 1.03 | AC Distribution Panel (415 V, AC) complete with ckt. Breakers, indicating Lamps, bus bar etc for 132/33KV Grid Station etc. as per site requirements. (Complete in all respects) with the following specifications LT Breaker of rating 400 Amp 2 no., LT Bus Coupler Breaker of rating 400amp 1no., MCCB 200amp-3no., MCCB 100amp-4no., MCB 63amp-18no., MCB 32amp-24no., MCB 16amp-24no., Bus Bar in Copper, Control Panel with over current and earth fault relay indicators,voltage selector switch and digital voltmeter and as per site incharge | 1 | Nos | 4,95,000 ₹4,95,000 Lowest | 8,00,000 ₹8,00,000 |
| 1.04 | 100 KVA Oil Cooled servo stabilizer 3-phase 4 wire copper wound indoor type, input voltage range 220-480V, output 400V ± 1%,in two parts of oil cooled and air cooled having, Digital control, Response time <10ms,Automatic Switch-Off against:· Under / Over-Voltage· Over-Load & Short – Circuit· Single Phasing, Class C Type Secondary surge Protection and as per site incharge | 1 | Nos | 5,90,000 ₹5,90,000 | 4,25,000 ₹4,25,000 Lowest |
| 2.00Power cables for AC/DC network in Control room (as per site requirements) | |||||
| 2.01 | 70sqmm 3.5 core Aluminium Cable ,1.1KV grade , Unarmoured,PVC Insulated Stranded Conductor FRLS Type. | 0.09 | km | 10,00,000 ₹90,000 | 5,25,000 ₹47,250 Lowest |
| 2.02 | 1.1KV 4Core 16sqmm Aluminium Un armoured PVC Cable | 0.4 | km | 5,00,000 ₹2,00,000 | 1,82,000 ₹72,800 Lowest |
| 2.03 | 4Core 6sqmm 1100V PVC insulated ,PVC sheathed,FRLS, Galvanised steel wire/strip armoured stranded copper conductor control cable complete | 500 | mtrs | 350 ₹1,75,000 Lowest | 584 ₹2,92,000 |
| 3.00 | Dismantling Charges of old functional equipments already installed PROPOSED FOR REPLACEMENT FROM S.NO 1.01 TO 1.05 and return to Divisional Stores at Udhampur including unloading, sorting and stacking etc. | 1 | job | 42,500 ₹42,500 | 25,929 ₹25,929 Lowest |
Tender Value
₹34.9 L
EMD Value
₹70,000
Closing Date
26 Sept 2025, 4:00 pmClosed
Executive Engineer
Executive Engineer TLMD-III JKPTCL Udhampur
Replacement of old outlived Battery Bank ACDB, DCDB, AVR at 132/33 KV Grid station Batote.
2025_PDD_288153_1
TLMD-III/udh/18 of 2025-26 dated 13-09-2025
Open Tender
Electrical Works
Turn-key
90 days
Batote
Please refer tender document
3 documents required · 3 mandatory
₹2,000
Executive Engineer TLMD-III JKPTCL Udhampur
₹70,000
Executive Engineer TLMD-III JKPTCL Udhampur
19 Nov 2025
15 Sept 2025
27 Sept 2025
15 Sept 2025
26 Sept 2025
15 Sept 2025
15 Sept 2025 - 18 Sept 2025
18 Sept 2025
Amount
SITC OF 110 V BATTERY Charger,110V DC Distribution Panel, 415V AC Distribution Panel and 100KVAServo Stablizer.
110 V Battery charger ( 3Phase)Float charging and load current rating 30Amp/60Amp/70Amp/100Amp at 220Vto 252VD.C (II) Boost charging current rating:50amp/55amp/60amp/70a/80a/100a at 198V to 296/302v DC and as per site incharge
DC Distribution Panel (110V, DC) with 3 outgoing No.20Amp. Air break ckt. Double pole for battery incoming supply with DP MCBs(as per site requirements) & indicating Lamps etc.DC Distribution Board frames shall be fabricated using mild steel structural section or pressed and shaped Cold rolled sheet steel of thickness not less than 2.0 mm and shall be provided with a degree of protection of IP-52 as per IS:2147, bus bar chamber having a degree of protection of IP-42 as per IS:2147. Finishing paint on panels shall be of shade 692 (smoke grey) of IS: The inside shall be properly stoved. The paint thickness shall be at least 50 microns. Bus bars and jumper onnections shall be of high conductivity copper of adequate size of following specifications with Main 20Amp- 3no., DC Change over switch , outgoing 6 Amp 18 No. and DC Digital Voltmeter 1No and as per site incharge
100 KVA Oil Cooled servo stabilizer 3-phase 4 wire copper wound indoor type, input voltage range 220-480V, output 400V ± 1%,in two parts of oil cooled and air cooled having, Digital control, Response time <10ms,Automatic Switch-Off against:· Under / Over-Voltage· Over-Load & Short – Circuit· Single Phasing, Class C Type Secondary surge Protection and as per site incharge
Power cables for AC/DC network in Control room (as per site requirements)
70sqmm 3.5 core Aluminium Cable ,1.1KV grade , Unarmoured,PVC Insulated Stranded Conductor FRLS Type.
1.1KV 4Core 16sqmm Aluminium Un armoured PVC Cable
4Core 6sqmm 1100V PVC insulated ,PVC sheathed,FRLS, Galvanised steel wire/strip armoured stranded copper conductor control cable complete
Dismantling Charges of old functional equipments already installed PROPOSED FOR REPLACEMENT FROM S.NO 1.01 TO 1.05 and return to Divisional Stores at Udhampur including unloading, sorting and stacking etc.
2V, 300 AH,Dry type VRLA battery cell for 110 V Battery bank at GSS Batote (compatible with existing battery bank) Including all accessories.
M/S JCM CONSTRUCTIONS (BID ID -2549608)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .