Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹71.7 L
EMD Value
₹1.4 L
Closing Date
9 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Provision of shed and other civil works near Sub station near ECS building inside HAL Factory Lucknow
9338
HAL-AD/9904/4626/CE/2024
Works
Accessories Complex - Lucknow Divn - Works - Civil
₹0
₹1.4 L
9 Sept 2024
22 Aug 2024
22 Aug 2024
9 Sept 2024
Dismantling/ Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) stacking serviceable and unserviceable material separately including cutting reinforcement bars including cleaning, cost of all labours, scaffolding, T & P etc. all complete at all height as per specification and as directed by Engineer in charge.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m; all kinds of soil, complete for foundations, column footing, wall foundation, manholes, post holes, trenches etc. returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm. dewatering if requried, dressing the sides, dispoal of exess surplus soil etc including all labour T&P, lead etc. all complete as per specification, drawing and as directed by Engineer in charge.
Surface dressing of uneven surface not exc. 15 cm deep, cutting & filling, including cutting of wild growth, jungle, cutting and uprooting of plants/ wild vegetation etc. also removal of surplus earth, wild growths, plants etc as directed by EIC upto a lead of 150 Mtr and lift upto 1.5m or part there of, with labour, T&P etc all complete as per direction of EIC.
Providing & laying PCC: 1:4:8 (1 Cement : 4 coarse sand derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, under floors or any other similar description of works eg. drains, pipe lines bedding layers, road, chambers etc with mechanical mixing including form work, side shuttering, compaction, curing including , materials, labour, T&P etc, required for proper completion of the work all complete all as per specifications, drawings and as directed by Engineer-in-Charge (EIC).
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in Foundations, drain, floor, pavement, manhole, approach or any other similar description of works etc including mechanical mixing, necessary form work, shuttering, compaction, curing including labour, material, T&P etc. all complete all as per specifications, drawings and as directed by Engineer-in-Charge (EIC).
Providing, fabricating and fixing steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more, conforming to IS-1786-1985, for any diameter of TISCON / SAIL/ RINL/Gallent advance of approved make by EIC for all type of R.C.C works, using deformed Thermo mechanically treated bars of Fe 500 D or more and conforming to relevant IS of any diameter for all type of R.C.C. works, straightening, cut to length, welding, bend to shape required including cranking bending spirally or hooping providing spacers/ chairs, and binding with mild steel wires (annealed) not less than 0.90 mm diameter so that placing and ramming of concrete will not displace it, including cost of all labours, materials, T & P etc. all complete at all height and location as per specification, drawing and as directed by Engineer in charge.
Providing & laying cement concrete 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregat 20 mm nominal size of Bahratcoop/Dala/Jhansi) in floor, approach roads, description of works etc including mechanical mixing , wastage, compaction, curing also making contraction joints/grooves, if required or any other similar description of works etc including necessary form work, shuttering, compaction, curing including labour, material, T&P etc. all complete all as per specifications, drawings and as directed by Engineer-in-Charge (EIC).
Providing and laying class 7.5 designation old size brick (having crushing strength 75 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand) in foundation and superstructure, walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding, raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per direction of EIC.
Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls of rough / fair faces of brick wall / concerete surface including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per direction of EIC.
Providing, Fabricating & fixing of MS Roof Truss (framed), trusses, purlins, crain, gantries, rails & fastnings and heavy bracket framing (beam, Tee, angle, channel, tubular , rectangular, square, flat, Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, wklding, bending as per site, fixing in position and applying a priming coat of approved steel primer all complete and all required sections including distance pieces, cleats, base plates, nut bolts, tie road, foundation bolt etc. at any height including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing and laying factory made chamfered edge Cement Concrete paver blocks 80 mm thick C.C. paver block of M-35 grade with approved colour, design and pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. all complete including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long minimum or as directed with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately): 0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm.
Preparation of surface with applying average 01mm thick approximately wall putty of make Birla/ Asian/ Berger as approved, before applying painting on wall including sand papering for smoothing of surface to achive even surface, cleaning of site after the work, leaving neat & tidy, including all labour material T&P etc. all complete as per specification all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge.
Providing & applying of Acrylic Smooth exterior paint of approved make & shade such as Asian/Berger/ICI to walls of any description at any height / depth (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm), including preparation of surface by sand papering, filling holes, cracks with birla putty stopping ,removing oil/smudge marks spreading and removing coverings, to doors, windows, floors,fittings, etc. to protect from splashes, removing and replacing furniture's, moveable cupboards,chicks, blinds, etc. washing floors, cleaning glass, joinery, leaving the premises clean neat and tidy including disposing rubbish outside in dustbins all complete as per specification & direction of EIC.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new/ old work (with primer on new work) over an under coat of suitable shade with ordinary paint of approved brand and manufacture such as Asian/Berger/ICI/ Dulux including surface preparation, suitable primer, cleaning the dirt and other impurities, scrapping smooth and filling crevices with approved filler of approved brand, including cost of all material, labours,ladders/ scaffoldings, brushes, T&P etc. complete at all height as per specification and as directed by Engineer in charge.
Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)] For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete : Precoated/mill finish aluminium Ridges plain (500- 600mm) including cost of all material, labours,ladders/ scaffoldings, brushes, T&P etc. complete at all height as per specification, drawing and as directed by Engineer in charge.
Supplying, stacking and Spreading 06 mm thick red bajri, watering and rolling complete including preparation of the surface and rolling, with road roller, all complete including all labour T&P, lead etc. all complete as per specification, drawing and as directed by Engineer in charge.
Above
HAL-AD/9904/4626/CE/2024
Provision of shed and other civil works near Sub station near ECS building inside HAL Factory Lucknow
Description
Name of the Individual / Firm / Company: * Mandatory
Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
Contact details
Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-
List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.
PAN No.:
Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.
Goods and Service Tax ID No.
SAC (Service Accounting code) along with the tax structure.
Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2022 of the previous financial year [ should not be less than 30% of Amount put to tender]
EMD of Rs.143320.00
Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]
(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.
(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.
(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Details of person holding the power of Attorney (If different from contact person)
DECLARATION I
DECLARATION II
DECLARATION III
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.pdf
TENDER_DOCUMENT • 0.03 MB
TECHNICALBID.pdf
TENDER_DOCUMENT • 0.74 MB
BOQ.xlsm
TENDER_DOCUMENT • 0.03 MB
PQ.xlsx
TENDER_DOCUMENT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .