Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Technically accepted |
| 2 | Accepted-Technical | Accepted-Technical Technically accepted |
| 3 | Accepted-Technical | Accepted-Technical Technically accepted |
Tender Value
₹24.5 L
EMD Value
₹30,000
Closing Date
3 Aug 2026, 5:00 pmClosed
Executive Engineer Works Department ZP Ratnagiri
Dr.Babasaheb Ambedkar Bhavan Ground Floor Executive Engineer Works Department Ratnagiri ZP Ratnagiri.
Construction of Sakav At Tamhane Navaluwadi Tal. Rajapur Dist.Ratnagiri. For the year 2025 26
2026_RATNA_1319403_2
RZP/WD-Ratnagiri/E-Ten Un EMP ENGR-07/2026-27
Open Tender
Civil Works - Buildings
Percentage
180 days
Rajapur
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
₹30,000
20 Sept 2026
20 Jul 2026
5 Aug 2026
20 Jul 2026
3 Aug 2026
20 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Item No.1:- Excavation for roadway in earth ,soil of all sorts ,sand,gravel or soft murum including dressing section to the required grade ,camberandsideslopesandconveyingtheexcavatedmaterialswithallliftsuptoaleadof50m.andspreadingforembankmentorstackingasdirected. By Manual Means. ( Item used only when Quantity is below 10 Cu.m.) | 104.6 | Nos | 330 | ₹34,518 |
| 2 | Item No.2:- Excavation for roadway in hard rock by wedging and chiselling or line drilling including dressing section to the required grade ,camber and side slopes andconveyingtheexcavatedmaterialswithallliftsuptoaleadof50m.andspreadingforembankmentorstackingasdirected. | 3.24 | Nos | 1,560.9 | ₹5,057.32 |
| 3 | Item No.3- Providing and fixing 25mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter up to 0.75 mtrs depth, placing the dowel in position and effectively grouting the hole with CM 1:1 proportion etc. complete. | 10 | Smt | 1,841.4 | ₹18,414 |
| 4 | Item No. 4 :- Providing and laying in situ / ready mix cement concrete of M-15 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) | 28.21 | Rmt | 7,736.2 | ₹2,18,238.2 |
| 5 | Item No. 5 :- Providing and laying in situ / ready mix M-25 plain cement concrete of trap / granite / quartzite / gneiss metal for cast in citu piers,abutment ,returns ,wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approvede sign with compacting by vibrating and curing complete ,including plywood / steel form work centering ( excluding dewatering by means of pump )andincludingbaillingoutwaterandcuringfinishinginCM1:3etc.complete.asdirectedbyengineerinchargebasicrateshallbeincreasedforheightabove5.00minfollowinhmanners | 105.05 | Smt | 10,137.1 | ₹10,64,902.36 |
| 6 | Item No. 6 :- Providing and laying in situ / ready mix controlled M-25 cement concrete of of trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in CM 1:3 and curing etc complete ( Excluding reinforcement) With reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of required specifications ( VSI sand finely washed etc ) | 4.16 | Smt | 10,785.05 | ₹44,865.81 |
| 7 | Item No. 7 :- Providing and laying in situ / ready mix M-25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSI sand finely washed etc ) | 14.41 | Smt | 13,241.35 | ₹1,90,807.85 |
| 8 | Item No 8:- Providing and laying in situ / ready mix M 25 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc )
RCC work of Ballast walls & Kerb | 0.59 | Smt | 11,819.45 | ₹6,973.48 |
| 9 | Item No.9:- Providing and cutting bending, hooking, laying in position and tying HCRM/ CRS for reinforcement as per detailed drawings for R.C.C. work Note : Where item no 34(c) considered in estimate, Anti Corrosive Treatment Shall not be considered additionaly. HCRM : High Corrosion Resistance Marine. CRS : Corrosion Resistance Steel. | 2.17 | Smt | 1,00,986.15 | ₹2,19,543.89 |
| 10 | Item No. 10 :- Providing and fixing in position tar paper bearing as per detailed drawing etc. complete. | 9 | Smt | 108.9 | ₹980.1 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.04 MB
Tendernotice_2.pdf
PDF • 0.19 MB
Tendernotice_3.pdf
PDF • 0.09 MB
B1tamhane.pdf
Tender Documents • 2.03 MB
BOQ_2261198.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .