Proposed renovation of Auditorium, 2nd floor, GJB, TMH, Parel

Amount

Civil

Electrical

Description of Work / Item(s)

Amount

A Scaffolding and Dismentaling work Providing and fixing double scaffolding system (cup lock type) up to srequired height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The plan area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. ( Scaffolding height willbe consider upto 4.25 mtr and Hold period for entire scaffolding is one month )

Scaffoling in Plan area

For every additional height of 1 metre or part thereof above 4.25mtr height. (Mode of measurement: a) Plan area shall be measured for every additional height of 1.0 metre above 4.25 mtr and paid with full rate and b) For additional height less than 1.0m i.e. part thereof, plan area shall be measured on prorata basis and paid with full rate)

Above scaffolding additiion hold for entire scaffolding of required duration for execution of work after completion of one month period after installation date of scaffolding.

Demolishing / Removing existing door shutter and wall pannelling with inside aucastic material in proper manner with out damaging the inside frame.All wooden scrap removed material should shifting and stacking at required place and all removed glasswool material and other unwanted material should removed out of hospital premises as per direction of Engineer-in-charge.

Demolishing / Removing existing false ceiling of required height including aucastic material, electrical fittings, AC grills, speakers and central sliding railing system and all alied fixtures in false ceiling including frame work and taking out all removed material out of hospital premises all as per direction of Engineer-in-charge.

Structural steel work: at all levels including supplying cutting fabricating welding or bolting erecting and fixing in position including painting with a primary coat of approved steel primer, including cost of materials labour with chasing in wall or embedding in floor and making good the same by filling 1:2:4 cement concrete and plastering if necessary all as specified and directed by engineer in charge.

Removing existing woolen carpet flooring and taking out all material out of hospital premises.

Breaking existing stage including removing woolen carpet, wooden base flooring , side panneling, steps with damaged base wooden / Metal / Masonary, concrete asper requirement including stakking all serviciable material at required place and other unwanted material should removed out of hospital premises etc complete as per direction of Engineer-in-charge. ( Plan Area of stage 65 Sqm )

Providing and fixing 32mm thick block board solid core internally lipped bonded with waterproof type synthetic resin hot pressed with marine ply finished on both faces and edges will be lipped with teak wood lipping on all sides.Fixing with screws, Hardwere etc. applying one coat of approved wood primer etc. all complete as specified and directed by Engineer-In-Charge.

Providing wood work with 1st Class C.P. teak wood in frames for doors, false ceiling and partitions etc.wrought framed and fixed in position including applying one coat of approved wood primer to the exposed surfaces and two coats of bitumastic paint to the surface of wood in contact with masonry/concrete etc.complete as per direction of Engineer-in-charge

B Stage Work Stage Area- Acoustic Ceiling Providing and Fixing of Open cell metal Ceiling (Black Color) of thickness 10mm x 50mm ht. having cell size of 100mm x 100mm mounted on Skelet/Grid suspended ceiling system which includes G.I. Main at every 1200c/c and cross are fixed to main T at 600mm c/c. Wall angle is then fixed along the perimeter of wall with nail / screw. The suspension is done with all acessories like soffit cleat, levelling clips & wire rods 3mm thick as per the drawings. The entire system to be installed by skilled labour as directed by Engineer in Charge.

Stage Area- Ceiling Painting (inside open cell ceiling) Providing and fixing of two or more coats of Black Acrylic Emulsion paint of approved make and color on ceiling surfaces (all sides), before the installation of open cell metal ceiling upto all heights, including appropriate surface preparation, to achieve a uniform & smooth finish to the satisfaction of Enginner incharge.

Stage Area- Wall Panelling Providing and fixing in position Acoustic Polyethylene Terephthalate Tech-Panel (Colour and Design as approved) having size 2400mm x 1200mm, made from compressed polyester Fibre of 10mm thickness, 1800-2000 GSM Density. The Polyethylene Terephthalate Panel should be Highly resistance to humidity (RH:99%), water vapour diffusion resistance (as per ISO-12572-2016 standards), zero mold growth (as per EN-15101-1 standards), Highly versatile and (Class A) flame retardant (as per BS-3119 standards, IS-15061 standards) and Thermal conductivity (as per EN12667 standards), The product should have an acoustical performance of 0.80 NRC. The Panel should be fixed on Aluminium framework of 50mm x 25mm x 1.5mm fixed with Angular Cleats and spaced at distance of 600x600mm center to center, The wall should be treated with suitable sound dampening membrane. The frame should have infill of 50mm Polysynth. The framework should be finished with 12mm Marine-ply as per IS 710 standard having 22 to 25mm perforations. The exposed surface of the ply should be treated with Fruedenberg acoustic membrane and then the final finishing material of 10mm Polyethylene Terephthalate panel by using Insta-Bond Standard adhesive. The paneling shall be finished as per the design, sizes, colour, cut-outs, joints and all other elements as directed by Engineer in Charge. The entire system to be installed by skilled labour as directed by Engineer in Charge.

Stage Area Flooring Supply & Installation of stage flooring system with the Area elastic with total thickness of 75 mm comprising of 15mm pre laminated Engineering Wooden flooring followed by 15mm MR Ply, followed by 35mmX50mm Salwood Framing and 10mm Power Rubber Pad. Product top finish to have square Edge & Prefinished. Structure of system should be 10mm thick rubber pad, 35X50mm Salwood framing, 50mm infill of Dry river sand in the cavity, followed by the 15mm Plywood and finised with top flooring. Top wood plank sizes should be 15mm Thick, 130mm Wide and 1830mm length. Salwood framing to be placed at a distance of 600mm C/C. with infill of 50mm dry river sand. Entire system should follow norms with the EN 14904(06/2006) and technical parameters for the product should have friction of 95 according to EN 13036-4, Shock absorption of 45% according to EN 14808, Vertical deformation should be 1.8mm according to EN 14809 and Vertical ball rebound should be 99% according to EN 12235. & European CE Marking. (Make: INDOSONIC, HARLEQIN Or Equivalent ) (Basic rate of engineering wooden flooring: 385 Rs/Sqft)

Providing and fixing of stage front facia and stairs with 12mm pre-lamnated HDHMR Board from all side exposed surface (shade as per design and approval), with Aluminium Framework of 50mm X 40mm pipe, with infill of 50mm polywool, fixed with self drilling screw, with moulding finishing pattis as per drawing, including hardware, scaffolding, all labour, materials, complete in all respect as per Drawings & direction of Site-in-charge. Mode of Measurement is Front area only

Stage Area - Proscenium-Pelmet Works Providing, fixing & fabricating of Proscenium-Pelmet having size of 900x 64mm thick with Aluminium Framework of 50mm X 40mm pipe, with 8mm thick approved comm.ply with approved laminate all side exposed surface (shade as per design and approval), with infill of 50mm polywool, fixed with self drilling screw as per drawing, including hardware, scaffolding, all labour, materials, etc complete in all respect as per Drawings & directed by Engineer In Charge. Mode of Measurement is Front area only

C House Area House Area - Acoustic Side-Wall Panelling Works (upto 1.2 mtr height from Floor finish level ) Providing and fixing Wall panelling with Acoustic Soundtrap Flutted Slat Panel of size 2400mm x1200mm, having 16mm thickness, made of HDHMR, Thermo treated (formulation recommended by Manufacturer), panel substrate of FR grade, with a Laminated facing as per the approved shade/ species & finish and a melamine balancing layer on the reverse side. The Panels should have a special Helmholtz perforation pattem on the reverse side of the panel and the pitch, grooves design on the front side. The edges of the panel should be tongue-grooved pattern for fixing and getting a seamless surface finish. The back surface of the panel should be provided with high quality acoustic fleece. The panels shall be mounted and fixed on the Z-Bar/Strut channel with clipping system.The product should have an acoustical performance of 0.85 NRC. The Panel should be fixed on Aluminium framework. The wall should be treated with 2mm Mass Loaded Vinyl Membrane. The frame infill should be of 50mm Polysynth (density 1000 GSM). The framework should be finished with 12mm Marine-ply as per IS 710 standard having 22 to 25mm Helmholtz perforations. The paneling shall be finished as per the design, sizes, colour, cut-outs, joints and all other elements as directed by Engineer in Charge.

Wall Framing Works Providing and fixing Wall panelling frame work made out of heavy duty Aluminium section of 50mm x 40mm x 1.5mm equally fixed with Angular aluminium cleats and spaced at distance of 600 x 600mm center to center. All as specified and directed by Engineer In Charge.

House Area - Acoustic Side-Wall Panelling Works (from 1.2 mtr ht. upto false ceiling)

Providing and fixing in position Acoustic Polyethylene Terephthalate Tech-Panel (PET Wooden Printed as approved) having size 2400mm x 1200mm, made from compressed polyester Fibre of 10mm thickness, 1800-2000 GSM Density. The Polyethylene Terephthalate Panel should be Highly resistance to humidity (RH:99%), water vapour diffusion resistance (as per ISO-12572-2016 standards), zero mold growth (as per EN-15101-1 standards), Highly versatile and (Class A) flame retardant (as per BS-3119 standards, IS-15061 standards) and Thermal conductivity (as per EN12667 standards), The product should have an acoustical performance of 0.80 NRC. The Panel should be fixed on existing framework. The wall should be treated with 2mm Mass Loaded Vinyl Membrane. The frame infill should be of 50mm Polysynth. The framework should be finished with 12mm Marine-ply as per IS 710 standard having 22 to 25mm Helmholtz perforations. The exposed surface of the ply should be treated with finishing material of 10mm Polyethylene Terephthalate panel by using Insta-Bond Standard adhesive. The paneling shall be finished as per the design, sizes, colour, cut-outs, joints and all other elements aa as per specified and directed by the Engineer in Charge.

Providing and fixing of Acoustic Polyethylene Terephthalate Rafters, made from 10mm thicknes, having size of 50mm x 50mm, to be stuck directly on the finished Acoustic Polyethylene Terephthalate Tech-Panel, using Insta-Bond standard Adhesive, to be installed by skilled labour as per design.

House Area - Acoustic Rear-Wall Panelling Works (upto 1.2 mtr height from Floor finish level ) Providing and fixing Wall panelling with Acoustic Soundtrap Flutted Slat Panel of size 2400mm x1200mm, having 16mm thickness, made of HDHMR, Thermo treated (formulation recommended by Manufacturer), panel substrate of FR grade, with a Laminated facing as per the approved shade/ species & finish and a melamine balancing layer on the reverse side. The Panels should have a special Helmholtz perforation pattem on the reverse side of the panel and the pitch, grooves design on the front side. The edges of the panel should be tongue-grooved pattern for fixing and getting a seamless surface finish. The back surface of the panel should be provided with high quality acoustic fleece. The panels shall be mounted and fixed on the Z-Bar/Strut channel with clipping system.The product should have an acoustical performance of 0.85 NRC. The Panel should be fixed on Aluminium framework. The wall should be treated with 2mm Mass Loaded Vinyl Membrane. The frame infill should be of 50mm Polysynth (density 1000 GSM). The framework should be finished with 12mm Marine-ply as per IS 710 standard having 22 to 25mm Helmholtz perforations. The paneling shall be finished as per the design, sizes, colour, cut-outs, joints and all other elements as directed by Engineer in Charge.

House Area - Acoustic Rear-Wall Panelling Works Providing and fixing in position Acoustic Polyethylene Terephthalate Tech-Panel (Wooden Printed as approved) having size 2400mm x 1200mm, made from compressed polyester Fibre of 10mm thickness, 1800-2000 GSM Density. The Polyethylene Terephthalate Panel should be Highly resistance to humidity (RH:99%), water vapour diffusion resistance (as per ISO-12572-2016 standards), zero mold growth (as per EN-15101-1 standards), Highly versatile and (Class A) flame retardant (as per BS-3119 standards, IS-15061 standards) and Thermal conductivity (as per EN12667 standards), The product should have an acoustical performance of 0.80 NRC. The Panel should be fixed on existing frame work. The wall should be treated with 2mm Mass Loaded Vinyl Membrane. The frame infill should be of 50mm Polysynth. The framework should be finished with 12mm Marine-ply as per IS 710 standard having 22 to 25mm Helmholtz perforations. The exposed surface of the ply should be treated with finishing material of 10mm Polyethylene Terephthalate panel by using Insta-Bond Standard adhesive. The paneling shall be finished as per the design, sizes, colour, cut-outs, joints and all other elements all as per specification and directed by the Engineer in Charge.

House Area - Acoustic Ceiling Framing works Providing and fixing Aluminium framework using 50mm x 40mm pipes equally spaced at 600x600mm center to center, The frame infill should be of 50mm Polysynth (density 1000 GSM). The framework should be finished with 12mm Marine-ply as per IS 710 standard having 22 to 25mm Helmholtz perforations. The framing shall be as per the design, sizes, colour, cut-outs, joints and all other elements, all as per specification and directed by the Engineer in Charge. (Make: Indosonic/Equivalent)

House Area - Acoustic Ceiling panel works

Providing and fixing in position Acoustic Polyethylene Terephthalate Tech-Panel (PET Wooden Printed), made from compressed polyester Fibre of 10mm thickness, 1800-2000 GSM Density. The Polyethylene Terephthalate Panel should be Highly resistance to humidity (RH:99%), water vapour diffusion resistance (as per ISO-12572-2016 standards), zero mold growth (as per EN-15101-1 standards), Highly versatile and (Class A) flame retardant (as per BS-3119 standards, IS-15061 standards) and Thermal conductivity (as per EN12667 standards), The product should have an acoustical performance of 0.80 NRC. The paneling shall be finished as per the design, sizes, colour, cut-outs, joints and all other elements all as per specification and directed by Engineer in Charge. Indosonic/Anutuone/Armstrong)

Providing and fixing in position Acoustic Soundtrap Wooden Perforated panels, made from 12mm HDHMR board, having perforations of 6mm to 8mm dia. FR grade. The Panel should be Highly resistance to humidity (RH:99%), water vapour diffusion resistance (as per ISO-12572-2016 standards), zero mold growth (as per EN-15101-1 standards), Highly versatile and (Class A) flame retardant (as per BS-3119 standards, IS-15061 standards) and Thermal conductivity (as per EN12667 standards), The product should have an acoustical performance of 0.80 NRC. The paneling shall be finished as per the design, sizes, colour, cut-outs, joints and all other elements all as per specification and directed by Engineer in Charge.

House Area - Carpet Flooring Providing & Laying 6mm cut pile thick Acoustic Nylon Carpet Flooring of make: Shaw/Kane/Milliken/equivalent as approved, with approved shade and pattern laid above 10mm thick underlay and having solution dyed non woven synthetic fibre with proper backing having weight 26 oz per sq.yard, Class I radiant panel, NBS smoke < 3.5KV, be fixed property after necessary leaving using proerietry adhesive for fixing of carpet as per manufacture specifications all as per desing shade apporved by Engineer-in-Charge.

House Area - Auditorium Chairs AUDITORIUM CHAIRS: Providing & fixing of pushback with auto tip up auditorium chairs, synchro sliding mechanism, PCP (Polypropylene Copolymer) injection moulded / Thermoplastic housing for seat cushion & backrest. 80 mm wide arm rest in CP teakwood of specified size. Structure back & bottom frame of ERW tube made as per IS:3074-2005 and wing component in channel frame of HRCA sheet metal with wooden upholstery and sliding mechanism. (Chair handle to chair handle c/c shall be min 535mm). The seat shall be 510 mm deep x 550 mm wide at 450mm ‡ 10 mm from finished floor level and chair back of size 550mm wide x 720mm height including Provision for including LED chair lights and respective numbers for the chairs and aisles as per chair layout. The back rest seat profile shall be confirming to ergonomically design profile ensuring lumber support. The fabric (samples should be approved by Engineer In-Charge), anchoring with fasteners, structural frame, PU foam, spring/ mechanism, wing etc complete all as specified and directed by Engineer In Charge

Acoustic Double Doors Designing, fabricating, testing, installing and fixing in position 100 mm thick acoustic fire door( having 2 shutters) with seasoned Hardwood frame size 100x75mm with rebate of required size. Shutter of 75mm thickness to be made using frame of 34x100mm section of chemically treated seasoned wood. All wood work shall be treated as termite free. 12 mm thick commercial plywood of Approved make with 01 mm thick lamination with suitable adhesive and shade shall be fixed over and infill cavity shall be filled with acoustic polywool and STC insulation material of 4mm thick MLV Sheet. Periphery of shutter to be covered with 12mm thick teak wood lipping. Weather seal to be fixed on frame of door to fill the gap of shutter and wooden frame (chowkat). Dropdown seal to be fixed in shutter to block gap with floor when door is closed. The design should Include all Hardware fittings like Heavy duty SS hinges of suitable size,600 mm long CP brass H type Handles, 300 mm long brass Tower bolts, consealed pelmet type door closers, locking arrangement etc complete all as specified and directed by Engineer In Charge

Acoustic Wooden Skirting Providing and fixing 100×15mm thick Acoustic wooden Soundtrap - Slats skirting of matching shade of wall paneling slats, at the bottom of wall paneling. The skirting shall be fixed over 12mm thick marine ply to match the level of paneling.

D Control Room Area Control Room Area - Wall Panelling Works Providing and fixing of 12mm pre-lamnated HDHMR Board (shade as per design and approval), with Aluminium Framework of 50mm X 25mm pipe, with infill of 50mm polywool, fixed with self drilling screw, with moulding finishing pattis as per drawing, including hardware, scaffolding, all labour, materials, complete in all respect as per Drawings & direction of Site-in-charge.

Control Room Area - Ceiling Panelling Works Providing & Fixing Acoustic Mineral Fibre ceiling Tiles consisting of 600x600mm and 15mm thickness Lay in tiles with section flanges in colour white, with Main Tees Runner, 1200 mm & 600 mm Cross Tees. The grid should be of 24mm wide T - section flanges colour white on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a appropriate web height and a load carrying capacity of 23.71 Kgs/M2. The paneling shall be finished as per the design, sizes, colour, cut-outs, joints and all other elements etc complete as directed by Engineer in Charge.

Control Room and Green room Area - PVC Flooring Works Providing and laying poly vinyal chloride (PVC) rolls of 2mm thick and 1.5m width manufactured by approved pattern/colour and design for flooring, skirting/dado/ laid or existing smooth cement tile or concrete of plastered finish with suitable adhesive as per manufacturers specifications close jointed and finished to proper bends, slopes and plumbs as directed etc. complete generally as per manufacturer’s specifications. PVC approved make , approval by Engg-in-charge.

Control Room Area - Glass Window panel Works Providing and fixing of 6-8mm toughened glass (one way mirror) finish with appropriate size of wooden frames to be fixed for viewing the auditorium stage, to be fixed by skilled labour, including labour, materials, complete in all respect as per drawings and as directed by Engineer in Charge.

Green Room Area - Wall Painting Works Providing and fixing of two or more coats of Acrylic Emulsion paint of approved make and color on wall surfaces (all sides), with standard putty, primer works as recommended by the contractor, including appropriate surface preparation, to achieve a uniform & smooth finish to the satisfaction of Enginner incharge.

Green Room Area - Ceiling Panelling Works Providing & Fixing Acoustic Mineral Fibre ceiling Tiles consisting of 600x600mm and 15mm thickness Lay in tiles with section flanges in colour white, with Main Tees Runner, 1200 mm & 600 mm Cross Tees. The grid should be of 24mm wide T - section flanges colour white on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a appropriate web height and a load carrying capacity of 23.71 Kgs/M2. The paneling shall be finished as per the design, sizes, colour, cut-outs, joints and all other elements as directed by the architect / Engineer in Charge. Including leveling, scaffolding upto 3.5m ceiling height (Above 3.5m height extra charges for scaffolding shall be applicable) etc complete. system to be installed by skilled labour as directed by Engineer in Charge.

Name Board and Signages/Mural Art works/logo Supply and fixing of Name board, Signage board of approved dimensions as per approved design with following specification. a) Board shall be fabricated with 3 mm thick ACP sheets of approved make. Powder coated Aluminium sheet shall be fixed from the rear side of the entire board to make box section. b) TATA MEMORIAL HOSPITAL Logo letters (Hindi and English) shall be made of Acrylic cutout letters of approved make and shall be uniformly illuminated by using Digital LED light of Samsung or equivalent make. c) Powder coated Aluminum clips and brackets shall be used of minimum 3 mm thickness as per direction of Engineer In charge. d) Words of other matter of the signage board shall be fixed using reflective vinyl cutout letters of approved make.

Detail Architectural interior Design, drawing with MEP design of Auditorium 2nd floor GJB. 1) Agency should appoint the proper experienced architect for preparing the detail design of Auditorium interior work such as wall pannelling, ceiling, flooring, chairs, stage design and console room design including proposing the suitable acustic insulation as per requirement. 2) Agency should appoint the MEP consultant for designing the HVAC system, Electrical work, Audio/ Vidio system, Fire fighting and Fire alarm system, stage lighting etc . 3) Submission of GFC drawing in 3nos of set hard copy and submission of soft copy in PDF and Auto cad formate. 4) Architect and consultant should attend weekly meeting and visit the site as per requirement upto the completion of work. 5) The payment of Architect / Consultant will be paid in prorata basis . 6) Submission of as built drawing after completion of work .

Providing making and supplying computer table made out of 19mm thick approved commercial ply for table top, mounted on the vertical side support of 19mm thick ply and drawer unit cabinet with 12mm thick ply appron as shown in drawing. The drawer cabinet made out of 19mm commercial ply for sides, shelves and shutters and drawers mounting with heavy duty sliding channel with ready made key board drawer with heavy sliding channels, all edges shall be lipped with 6mm thick T.W. lipping patti or PVC edge beeding matching with laminate. All exposed faces should be 1.0mm thick laminate of approved colour and make, non laminated area should be 0.80 mm thick white / off white laminate including necessary hinges, handle, multuporpose lock, ball catch etc. as per drawing and as specified and directed by Engineer-In-Charge.

Providing and fixing cabinet made up of 19 mm. Commercial ply of approved make for top, bottom, sides and shelves and 8 mm thick commercial ply approved make for back side.Door shutter made up of 19mm thick commercial ply and All exposed surfaces including shelves for open type cabine should be laminated with 1.0mm thick approved plastic laminate sheet of required colour including all brass fittings such as hinges, tower bolts, ball catches, stopper, handle, knobs as per shown in drawing or approved by Engineer-In-Charge etc.and all exposed edges shiuld be 6mm thick lipping patti or PVD lipping patti matching with laminate finish, locking arrangement with Godrej multipurpose lock etc. All inside areas shall be .80mm thick approved colour laminate etc.all complete as specified and directed by Engineer-In-Charge.

Description of Work / Item(s)

Amount

ELECTRICAL WIRING WORK Electrical Dismentling work: Dismentling the existing light, fan, bell, speaker, independent plug point wiring of all types with accessories and cable /switchgear in an approved manner as per instruction of Engineer Incharge

SITC of Distribution Boards: Supply, installation, testing & commissioning TPN 8 way DBs with per phase Isolation with RCCB of 25/40A 100mA for each phase complete with all outgoing SP MCB 6-32A and incomer MCB of FP 32-63A Legrand make complete with required internal phase isolatiom/copper leads and wiring,circuit marking,ferulin,SLD daigram with termination of existing wiring and cabeling with lughs and glands and C/L channel for DB support -IP 43 with Metal door Preferred make-Legrand.

SITC of Distribution Boards: Supply, installation, testing & commissioning VTPN 8 way DBs complete with all outgoing TP MCB 32-63A and incomer MCCB of FP 100-125A Legrand make complete with required internal phase isolatiom/copper leads and wiring,circuit marking,ferulin,SLD daigram with termination of existing wiring and cabeling with lughs and glands and C/L channel for DB support -IP 43 with Metal door Preferred make-Legrand.

SITC of Single phase Neutral Distribution board

Supply, installation, testing & commissioning SPN 8 way DB complete with all outgoing SP MCB 6-32A and incomer MCB of DP 32-63A Legrand make complete with required internal copper leads and wiring,circuit marking,ferulin,SLD daigram with termination of existing wiring and cabeling with lughs and glands and C/L channel for DB support -IP 43 with Metal door Preferred make-Legrand.

Supply, installation, testing & commissioning SPN 8 way DB complete with all outgoing SP MCB 40-63A and incomer MCB of DP 63-80A Legrand make complete with required internal copper leads and wiring,circuit marking,ferulin,SLD daigram with termination of existing wiring and cabeling with lughs and glands and C/L channel for DB support -IP 43 with Metal door Preferred make-Legrand.

Supply & Laying,testing & comissioning of aluminium/copper armoured cables fixed to walls,ceilings or laid in trench in an approved manner as per instruction of Engineer Incharge as follows:

31/2 Core 25 sq. mm Aluminium A2YFY with two nos of 12 SWG bare GI Earth wire

4 Core 4 sq. mm Copper 2XFY with two nos of 12 SWG bare GI Earth wire

4 Core 6 sq. mm Copper 2XFY with two nos of 12 SWG bare GI Earth wire

3 Core 2.5 sq. mm Copper 2XFY with two nos of 12 SWG bare GI Earth wire

3 Core 1.5 sq. mm Copper 2XFY with two nos of 12 SWG bare GI Earth wire

SITC of Flexible Cables:- Supplying, fixing of following flexibles copper conductor 1100 V a.c. grade cables Polycab/RRK/Finolex make ISI/BIS/IS marked with proper connection at both the ends as directed by Eng --in -chrg. SIZE: 3X2.5SQMM

SITC of Flexible Cables:- Supplying, fixing of following flexibles copper conductor 1100 V a.c. grade cables Polycab/RRK/Finolex make ISI/BIS/IS marked with proper connection at both the ends as directed by Eng --in -chrg. SIZE: 3X1.5SQMM

SITC of Primary point wiring for light/fan/bell with ISI mark 3 x 1.5 sq.mm (P+N+E). FRLS PVC insulated copper conductor of Polycab / RRK /Finolex in surface/ recessed heavy class pvc casing capping/conduit of Presto-plast/sunwood /Precision make and Modular switch , ceiling rose/batten holder/slanting holder Boxes etc. with circuit labling/marking/ferruling complete.Primary point length 7 mtrs to 10 mtrs

SITC of Secondary point wiring - Extending from Primary point for light/fan/bell with ISI mark 3 x 1.5 sq.mm (P+N+E). FRLS PVC insulated copper conductor of Polycab / RRK /Finolex in surface/ recessed heavy class pvc casing capping/conduit of Presto-plast/sunwood /Precision make with Anchor make-ceiling rose/batten holder/slanting holder Boxes etc. with circuit labling/marking/ferruling complete.,Secondary point Extending from Primary point upto 6 m

SITC of surface/ recessed/conceled M.S. conduit with all fitting & fixing accessories Precision make 50 mm Dai, 2 mm thick

SITC of surface/ recessed/conceled M.S. conduit with all fitting & fixing accessories Precision make 25 mm Dai, 2 mm Thick.

SITC of Rigid PVC conduit Heavy duty (HMS) with all fitting & fixing accessories Precision make 25mm width ,2 mm thick

SUB MAINS:-

SITC of Heavy duty PVC casing-caping/conduit of Precision make. Supplying and erecting mains with copper conductor PVC insulated FRLS of 1100 V AC grade Polycab/RRK/Finolex make wire with circuit labling/marking/ferruling complete.2 x 1.5 sq mm -+ 1.5sqmm Earth wire in an approved manner as per instruction of Engineer Incharge

SITC of Heavy duty PVC casing-caping/conduit of Precision make. Supplying and erecting mains with copper conductor PVC insulated FRLS of 1100 V AC grade Polycab/RRK/Finolex make wire with circuit labling/marking/ferruling complete.2 x 2.5 sq mm -+ 1.5sqmm Earth wire in an approved manner as per instruction of Engineer Incharge

SITC of Heavy duty PVC casing-caping/conduit of Precision make. Supplying and erecting mains with copper conductor PVC insulated FRLS of 1100 V AC grade Polycab/RRK/Finolex make wire with circuit labling/marking/ferruling complete.2 x 4 sq mm -+ 2.5sqmm Earth wire in an approved manner as per instruction of Engineer Incharge

Supply & Laying, testing & comissioning of following sizes flexible wires in suitable size of PVC conduit fixed to walls,ceilings or laid in trench in an approved manner as per instruction of Engineer Incharge as follows. Rate include conduit,laying, saddeling.in an approved manner as per instruction of Engineer Incharge

1X 35 sq. mm Copper FLEXIBLE PVC insulated leads.

1X16 sq. mm Copper FLEXIBLE PVC insulated leads.

SITC of Termination of the below cables with Heavyduty Cu. Lugs & ss cable glands in an approved manner as per instruction of Engineer Incharge.

4 Core 25/16 sq.mm.Aluminium cable

SITC of GI Perforated/ladder type cable Trays. The cable tray shall be fixed to wall / ceiling with suitable supports undergone through 7 tank process with various chemical treatment, duly epoxy polyster powder coated with matt black texture finish along with clamping arrangement and cover plate in an approved manner as per instruction of Engineer Incharge.

Cable Tray of 300mm Wide x 50mm height x 1.6 Thikness.

Cable Tray of 150mm Wide x 50mm height x 1.6 Thikness.

SITC of following sizes of FR PVC trunking on the surface of floor,wall & celings as required in an approved manner as per instruction of Engineer Incharge.

SITC of following sizes of SS trunking including chasing the wall, making the trenches in floor & plastering the chased portion and making good the damages with proper finishing etc. complete as required in an approved manner as per instruction of Engineer Incharge.

50mm x 50mmx3mm

100mm x 50mmx3mm.

Stage Lighting System

SITC CE/IS/BIS Certified of 150W soft Panel Light with minimum following Technical specifications ● Light Source : Atleast 400 Nos x 0.5W SMD LED Source ● Color Temerature : 3200K 100% Dimming Range ● CRI & TLCI : > 95 ● R9 : > 95 ● Beam Angle : 100° ● Lux output at 2 Mtr : > 1,120 Lux ● Power supply : 100-240V AC, 50/60Hz ● Power Factor >0.96 ● Easily Detachable plug in type 4 Leaf barndoor. ● Accessory slot for Gel frame and Honey comb screen should be available or else fixture will be rejected. ● Control Protocol : DMX512, RDM & Manual ● Fully RDM Compliant in DMX Mode ● Manual Control via Touch pad. ● No Fan design. Silent running ● Aluminium Housing to ensure the less wieght complete as required in an approved manner as per instruction of Engineer Incharge.

SITC of CE/IS/BIS Certified 400W LED Blinder Effect Light with latest RDM technology for user friendly operation with below specifications: • Light Source : Quad LED COB Source • Power Factor : >0.95 @ 230V AC 50Hz • Color Temerature : 3200K, CRI & TLCI Value > 95 • Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 4/8 DMX-512 Channel Modes • Beam Angle : 40° • Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run • Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project. • Lux output at 2 Mtr : > 8,500 Lux @ 40° • Dimming: 0 - 100% Electronic Dimming • Power and DMX: Loop in and loop out compulsary • DMX in & Out Through : 5 Pin XLR connectors • Certification: CE / BIS/IS/ISI complete as required in an approved manner as per instruction of Engineer Incharge.

SITC of CE/IS/BIS Certified 54 x 3W LED PAR Light with latest RDM technology for user friendly operation with below specifications: • Base Color RGBW Color Mixing • LED Configuration : Multiple Nos Individual RGBW LED Configuartion • Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 8 DMX-512 • Beam angle: 15° • Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run, Sound Active • Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project. • LUX @ 2m: >10,500 @ 15° Beam Angle • Dimming: 0 - 100% Electronic Dimming • Function: strobe, dimming, sound active and Master slave. • Housing: Die Casted Aluminium or Metal Housing with black epoxy polyster powder coated finish. • Power and DMX: Loop in and loop out compulsary • DMX in & Out Through : 5 Pin XLR connectors • Certification: CE / BIS/IS/ISI complete as required in an approved manner as per instruction of Engineer Incharge.

SITC of CE/IS/BIS Certified 54 x 3W LED PAR Light with latest RDM technology for user friendly operation with below specifications: • Base Color 3200K Color Mixing • Color Temperature : 3200K with CRI > 90 • LED Configuration : Multiple Nos Individual 3200K LED Configuartion • Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 1 DMX-512 • Beam angle: 15° • Control mode: RDM, DMX512 & Manual • Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project. • LUX @ 2m: >7,500 @ 15° Beam Angle • Dimming: 0 - 100% Electronic Dimming • Function: strobe, dimming, sound active and Master slave. • Housing: Die Casted Aluminium or Metal Housing with black epoxy polyster powder coated finish. • Power and DMX: Loop in and loop out compulsary • DMX in & Out Through : 5 Pin XLR connectors • Certification: CE / BIS/IS/ISI complete as required in an approved manner as per instruction of Engineer Incharge.

SITC of CE/IS/BIS Certified 200W Fresnel spot light with minimum following Technical specifications • Light Source : Single LED COB Source • Color Temerature : 3200K • CRI & TLCI : > 95 • Beam Angle : 9° - 52° manual Zoom • Focusing mechanism of lights should be SS/Brass lead screw type for step less smooth zooming. Sliding type focusing mechanism shall not be acceptable. • Fresnel Lens Dia should not lesser than 200mm • Zooming function of Fresnel should be through pole operated yoke (POS). • Lux output at 2 Mtr : > 38,500 Lux @ 9° &> 2,800 Lux @ 52° • Power supply Driver : IP65 or higher grade with pf >0.96 @ 230V • Accessory slot for Gel frame and Barndoor should be available or else fixture will be rejected. • Control Protocol : DMX & Manual • Fully RDM Compliant in DMX Mode • Manual Control via Touch pad. Tactile Switch for manual control fixture will be rejected. complete as required in an approved manner as per instruction of Engineer Incharge.

SITC CE/IS/BIS Certified of 4 - leaf barndoor with scrims for 200W LED fresnel spot light, undergone through 7 Tank chemical treatement to keep them rust free and, duly powder coated in black matt texture finish.complete as required in an approved manner as per instruction of Engineer Incharge.

SITC CE/IS/BIS Certified of Die cast Aluminium C - Clamp with safety chain duly epoxy polyester powder coated in black matt texture finish and safe working load of 100kg with below specifications. • Lock - MS threaded Galvanized lock key, • Plastic Glass filled nylon moulded M6 key. • Receptacle - 28mm standard TV spigot. • Safety - MS Galvanized chain with pin. • Finish - Pretreated and black epoxy polyester powder coated. • Self-weight - 0.54Kg

SITC CE/IS/BIS Certified of Safety bond with lock clip 1.5 Mtr Long made with twisted pair of GI wire rope, 2mm or 3mm Thickness with sleeve to be fixed around the grid to avoid fall of the material in case if the "C" clamp is not locked properly. SWL 150Kgs.complete as required in an approved manner as per instruction of Engineer Incharge.

SITC CE/IS/BIS Certified of 79mm Round Identification name plate duly epoxy polyester powder coated in matt texture finish.complete as required in an approved manner as per instruction of Engineer Incharge.

SITC CE/IS/BIS Certified of Fixed Stage Light Bar, 40Nominal bore . 48mm outer diameter pipe, length 11 Mtrs (Appx) made using MS 40NB Class ‘B’ Pipe dual barrel construction arrangement undergone through 7 tank process & various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications: • Dual barrel Light bar equipped with 40x75x40 Cable trenching arrangement with lid for better aesthetic look and cable safety. • Dual barrel pipe construction welded with 75x6mm MS Flat in every 1 Mtr for better strength • With Suitable Suspenders to fix the light bar with every 2mtr pitch. complete as required in an approved manner as per instruction of Engineer Incharge.

SITC CE/IS/BIS Certified of MS Fabricated 4 way 10A, 250V A.C, IEC, Lighting Junction box made up of 22SWG CRCA for LED lighting fixtures with Pipe clamp arrangement for fixing on pipe grid or Raul plug arrangement for wall/floor fixing, duly black epoxy polyester powder coated texture finish.complete as required in an approved manner as per instruction of Engineer Incharge.

SITC CE/IS/BIS Certified of MS Fabricated 2 way 10A, 250V A.C, IEC, Junction box made up of 22SWG CRCA with rocker switch to power up splitter and console with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, duly black epoxy polyester powder coated texture finish. complete as required in an approved manner as per instruction of Engineer Incharge.

SITC of MS Fabricated 5 pin DMX Signal IN Junction box fitted with 5 pin DMX Male socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. complete as required in an approved manner as per instruction of Engineer Incharge.

SITC of MS Fabricated 5 pin DMX Signal OUT Junction box fitted with 5 pin DMX female socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. complete as required in an approved manner as per instruction of Engineer Incharge.

SITC CE/IS/BIS Certified of Fabricated 5 pin DMX Signal loop Junction box fitted with 5 pin DMX Male & Female socket with 0.3 Mtr DMX Loop cable fitted with 5 pin DMX cable mount plug, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. complete as required in an approved manner as per instruction of Engineer Incharge.

SITC CE/IS/BIS Certified of Well designed 9 Way Direct Lighting Distribution Board made up of CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt texture finish consists of R, Y, B Indicator lamp, 63A TPN incomer, SP Mcb's and for the junction boxes fixed on the top of the light bar including wiring and busbar connection with proper earthing and Hingable door with magnetic door lock complete. complete as required in an approved manner as per instruction of Engineer Incharge.

SITC of Auxiliary marshalling box for power and signal cable termination in grid level and Light bar • CE/BIS/ISI Marked FC/PG cable entry gland required Nos as per cable entry. • MS channel arranging to fix terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. • CE/BIS/ISI Marked Grey terminal connector with each line having P, N, E Indication for each line incoming and out going cable connectors. • Box door must be made with Hingeable door with screw lock. • Made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish. complete as required in an approved manner as per instruction of Engineer Incharge.

SITC CE/IS/BIS Certified of RDM Compatible DMX Splitter unit with Minimum following specifications. ● 1 Nos 5 Pin DMX In socket and 8 Nos 5 Pin DMX Out socket ● In and out signal Optically Isolated ● LED Indicator for check the signal flow in output. ●Suitable for standard 19” cabinet ● Duly black epoxy polyester powder coated texture finish. complete as required in an approved manner as per instruction of Engineer Incharge.

SITC of CE/IS/BIS Certified Digital Lighting Console with Ultimate portability, offering a powerful LED and moving light controller in a small 19” unit with direct access to each of the lights. • 1024 DMX Channel • LDC Screen for easy Navigation • DMX compatible • Control up to 96 LED, moving lights and conventionals individuals • multi-function faders, complete as required in an approved manner as per instruction of Engineer Incharge.

SITC of CE/IS/BIS Certified 5 pin XLR male / female connectors of made up of Extra high temperature resistant insulator material, Larger solder contacts for easier termination. complete as required in an approved manner as per instruction of Engineer Incharge.

SITC of CE/IS/BIS Certified 5 Pin XLR Termination plug made up of extra high temperature resistant insulator material, Larger solder contacts for easier termination with 120 Ohm resister with 0.25Watt for signal termination.complete as required in an approved manner as per instruction of Engineer Incharge.

SITC IS/BIS/ISI Certified of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 3cx1.5 sq mm.complete as required in an approved manner as per instruction of Engineer Incharge.

SITC IS/BIS/ISI Certified of FR Grade DMX Signal 4 core + Ground shielding Cable with CE mark for the Signal network.complete as required in an approved manner as per instruction of Engineer Incharge.

SITC of MS perforated tray of Size 40 x 75 x 40mm & 1.6 mm Thickness undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish along with clamping arrangement.complete as required in an approved manner as per instruction of Engineer Incharge.

Earthing :- Supplying,installation of copper strip /bare wire of earthing system on wall /slab/column/beam along with clips etc including end connections with crimping type copper lugs complete in all respected and as directed by Eng-in-charge 14 SWG copper bare wire

SITC IS/BIS/ISI Certified of hardware’s such as clamps, connectors, glands, lugs, ferrules, welding rods and miscellaneous items required during installation work.complete as required in an approved manner as per instruction of Engineer Incharge.

SITC of LED Downlight , 15-18W , die cast aluminum housing with in built driver - Dimmable - 4000K/6500K as per approved by engineer incharge. The material should be of premium range of products with reputed make and should have relevant electrical certification. Lumens more than 100Lumens/watt pressure die-cast aluminimum housing with white front bottom frame, LED fixture to be fixed concealed as per site requirement. With BIS/ISI certification on both LED and driver, (should be compatible with 8channel diming module, analog diming system 0-1 0v , PWM, dali broadcast with replay interface, load type: dimimg lamp fitted with analog 0-10v & 1-10v dimmable drivers , diming lamp fited with PWM dimmable drivers, dimming of lamp fitted with DALI drivers in broadcast mode , power supply 230v 50hz 40A, OUTPUT: 8X16A switched load, 8X 0-10V/PWM/DALI BC 25mA PER CHANNELin an approved manner as per instruction of Engineer Incharge) TYPE: Round/Square as per site condition

SITC of LED Downlight, 15-18W, die cast aluminum housing with in built driver - Non-Dimmable - 4000K/6500K as per approved by engineer incharge. The material should be of premium range of products and should have relevant electrical certification. Lumens more than 100Lumens/watt pressure die-cast aluminimum housing with white front bottom frame , LED fixture to be fixed concealed as per site requirement.With BIS/ISI certification on both LED and driver,type: Round /Square as per site condition

SITC of LED Downlight,7W, indoor wall washer/wall light - Non-Dimmable light - 4000K as per approved by engineer incharge. The metal material antique brass should be of premium range of products and should have relevant electrical certification. With metal body and support flushed with ceiling/wall ,With BIS/ISI certification on both LED and driver .

SITC of LED Profile light 4000K , Minimum 50 Lm / watt, COVE LIGHT-LED STRIP-10W INDOOR LED STRIPLIT NW, with required sizing driver as per the approved by engineer incharge. The material should be of premium range of products and should have relevant electrical certification. With metal body and support flushed. With BIS/ISI certification on both LED and driver,in an approved manner as per instruction of Engineer Incharge

SITC of ISI/BIS/IS/CE certified 8 Channel dimming module, analog diming system 0-1 0v , PWM, dali broadcast with replay interface, load type: dimimg lamp fitted with analog 0-10v & 1-10v dimmable drivers , diming lamp fited with PWM dimmable drivers, dimming of lamp fitted with DALI drivers in broadcast mode , power supply 230v 50hz 40A, OUTPUT: 8X16ASWITCHED LOAD, 8X 0-10V/PWM/DALI BC 25mA PER CHANNEL including its housing/ panel box/Enclouser, should be compatible with 6 Button keypad , with all required wiring to run the system, in an approved manner as per instruction of Engineer Incharge

SITC of ISI/BIS/IS/CE certified 6 Button Keypad,Power supply : RS-485, 12VDC , 25-50mA, KNX: 29V<10mA wifi: 12VDC 200mA with external power supply , power supply included, functions: momentary button functionality latching button functionality manually exclusive button functionality for scenes with interlock (RS-485,KNX,WIFI) including its housing/ panel box/Enclouser, programing configuration ,RS 485: KEYCONFIG WINDOWN SOFTWARE, KNX :ETS, WIFI :goapp , should be compatible with 8channel dimming module and dimmable light, with all required wiring to run the system, in an approved manner as per instruction of Engineer Incharge

SITC of Supplying and fixing of 6 amp modular type 1 switch and 1 socket including modular boxes , moduler plate ( 3/4 module) switch box including connections with circuit marking as required, concealed type, preffered make: legrand Allzy, colour as per site interior & as per approved by engineer incharge.

SITC of Supplying and fixing of 2 nos. of 6/16 amp modular switch and socket in modular box with moduler plate ( 6/8 module ) switch box including Ints internal wiring & connections with circuit marking as required, concealed type preffered make: legrand Allzy , colour as per site interior & as per approved by engineer incharge.

SITC of Supplying and fixing of 3 nos. of 6 amp modular socket and 1nos. of 16A and 1nos. of 6A switch in modular box with moduler plate (8 module ) switch box including Ints internal wiring & connections with circuit marking as required, concealed type preffered make: legrand Allzy , colour as per site interior & as per approved by engineer incharge.

Supply, Installation , Testing & Commissioning of Point Wiring for 20A Reyroll Plug Sockets with 3Pin MetalTop,Housed in metal board with 25A SP MCB AC power sockets with Heavy duty PVC casing-caping/conduit of Precision make. Supplying and erecting mains with copper conductor PVC insulated FRLS of 1100 V AC grade Polycab/RRK/Finolex make wire with circuit labling/marking/ferruling/saddeling complete.2 x 4 sq mm -+ 2.5sqmm Earth wire in an approved manner as per instruction of Engineer Incharge

Primary Point ( DB to the First workstation) upto 7mtr length

Secondary Loop Points as per site upto 10 mtr length

SITC of Pop up box with base face plate, 6/16Amp universal power plug 2 Nos.,cat 6 lan socket -1 nos & RJ 11 Teliphone socket-1 nos ,HDMI retractable cable upto minimum 1 Mtr length ,USB charging outlet-1 nos,C type usb-1 nos etc. fixing & termination as per approved by engineer incharge (as per sample picture)

Chemical Earthing Station

Providimg chemical earthing with drilling in soil by means of proper drilling equipments in soil by means of proper drilling equipment as per requirment of site condition and providing earth electrode Cu bonded Steel Rod 17.2 mm dia X 3000 mm length (100 Microns) as per IEC 60364/62561 ECO safe carbon based backfill compound 50 pounds with Gun Metal Clamp and providing ECO friendly rust proof heavy duty wheather proof Polyethylene Earth Pit Chamber with dimensions 254 mm dia (top), 330 mm dia (bottom) and 260 mm (height) with submission of test report as per directions of EIC and making the site clear by removing debris.

Active LED Video Wall System, Screen, Digital Podium

Supply Installation Testing and Commissioning of ActiveVideo Wall Pixel Pitch 1.5 milimeter,Type- Indoor type LED Video Wall, Video Wall Size- 20 feet width* 10 feet Height Approx. ( or next Standard Size ) with Modules, Receiving Card, Power Supply unit ,Controller, With on site required length of Cable and Connectors with connection from console room to LED Wall etc. LED Wall Life - 100000 Hours.,LED Configuration-SMD1212, Module Size-320X160 approx,Module Resolution-208×104,Modules are Bezzle free,Pixel Density-422755dot/m²,Viewing Distance- ≥3-40m, Viewing Angle- X:140°Y:140, Max Power Consumption- ≤598W/m²,Color Grade- >16.7M, Gray Scale- 14bits,Color Temperature- 6500K±500K, Scanning Method- 1/52 scanning, Frequency (Hz）- 50-60HZ, Refresh Rate- 3840Hz, Brightness- 500/600cd/m², Signal connector- HUB75, Control System- NOVA/Equivalent,Module DC（Votage）- DC4.2-5V, Module Max Current DC（A）-5 amp, OR OEM Standard . Working environment- Zero to Plus 50 degree,Humidity- 10%-95%RH, IP Rating- front IP40, rear IP30 or Better.LED wall Mounting structure shall be provided wall mounted/floor mounted as per site requirments and appoved by LED wall OEM, 5 Nos of Spare LED wall module /200 Nos. of LED Diode are provided for repair work, Vendor has to submit onsite installation and testing is done as per OEM standarad and same report from OEM of LED wall need to be submitted+B100f Video Wall with Audio system,Control system, Switcher in such way that zero latency/delay in Video and related audio , Onsite OEM warantee of 2 years, complete in all respect

Supply and installation Testing & commisioning as per site requirments of 86" display with Aspect Ratio: 16:9; 4K Resolution (HxV): 3840(H)x2160(V); Back Light Unit: DLED; Brightness (typ): 500 cd/m²; Contrast Ratio: 1200:1; Viewing Angle: 150° OR Better; Display Orientation: Landscape & Portrait; Operation Time: 7 daysx24 hours; Connectivity: HDMI IN x 3, HDMI Output x 1, Audio Output: 1 x 3.5mm, USB 2.0 x 1, USB 3.0 x 1, RS232 x 1; USB Type-C x 1; System Version: Android 11; CPU: A55*4, GPU: MaliG51 MP2, RAM: 4GB; ROM: 32GB; Speaker Type: Built-in Speaker 2x12W; OPS & Wifi slot. Remote Control with battery, with wall bracket/stand in approved manner,Onsite OEM waranty of 3 years,Body Colour- Black or suitable to interior

SITC of Digital Podium,Slick Design, I/O Port- HDMI IN: 1 , HDMI OUT: 1 , USB 2.0:3, MIC OUTLET: 2 QTY,Embeded Front Side signages screen-Portrait Digital Signage Display for Podium , 32" Full HD(1920 X 1080) Slim DLED display, 500 Cd/m2, Android 9.0, , 2GB DDR4 memory, 16GB storage, HDMI 2.0 X 3, USB 2.0 x 2, Line Out X 1 (3.5mm Jack), RJ45 X 1, RS232 X Yes, 24/7 operation, Built in Wifi & Bluetooth, 24/7 Operational, Temperature:10ºC～40ºC, with digital signage software and license- This display is integrated in cutomised way in digital podium for Speaker name/Photo display etc, Podium Dimension (L × H × D): 786.3 × 420 × 1200 mm approx, complete with standard accessories.Colour- Suitable to interior and as approved by Engineering Incharge. ( Reference image attached)

SITC of Control Room monitor, 32" Full HD(1920 X 1080) Slim DLED display, 500 Cd/m2, Android 9.0, , 2GB DDR4 memory, 16GB storage, HDMI 2.0 X 3, USB 2.0 x 2, Line Out X 1 (3.5mm Jack), RJ45 X 1, RS232 X Yes, 20W in built speaker, 24/7 operation, Built in Wifi & Bluetooth, 24/7 Operational, Temperature:10ºC～40ºC

SITC of Desktop PC min. i5 processor latest generation, 16GB RAM, 512 GB SSD,License OS latest one, with 21" monitor, rack mount complete with all standard accessories- for Signage and Podium USB input

SWITCHING Systems

SITC of 18G 4K60 4:4:4 1x2 HDMI splitter with auto down scaling; 1 in 2 out HDMI distribution amplifier/splitter; HDMI 2.0 4K@60Hz 4:4:4 HDCP 2.2 Compliant; Each output can independently support automatic down‐scaling from 4K to 1080P; Supports multiple HDR formats including HDR10 and Dolby Vision; Supports PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS‐HD Master Audio and DTS:X audio formats; Input/output HDMI cable length up to 15m for 1080p, 10m for 4K@30Hz and 5m for 4K@60Hz, complete with standard accessories as required.

SITC of 18G 4K60 4:4:4 1x4 HDMI splitter with auto down scaling; 1 in 4 out HDMI distribution amplifier/splitter; HDMI 2.0 4K@60Hz 4:4:4 HDCP 2.2 Compliant; Each output can independently support automatic down‐scaling from 4K to 1080P; Supports multiple HDR formats including HDR10 and Dolby Vision; Supports PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS‐HD Master Audio and DTS:X audio formats; Input/output HDMI cable length up to 15m for 1080p, 10m for 4K@30Hz and 5m for 4K@60Hz, complete with standard accessories as required.

SITC of HDMI 2.0 HDBaseT Extension Set, Extend HDMI 2.0 signals up to 4K@60Hz / 4:4:4 up to 70m (4K 40m / 1080P 70m), Complete set Includes TX, RX, power supply, and IR flasher/emitter, Extends bi-directional IR. Flexible PoC (Power on either end), Supports HDR10, HDCP 2.2 compliant, Flexible power design (use power supply at TX or RX)

SITC of The Wallplate Receiver extends HDMI, IR, and RS232 over a single solid core shielded Category cable. The wallplate receiver must supports 1080p video signal up to 100m and 4K signals up to 4K@60Hz / 4:2:0 / 8 bit color up to 70m. The wallplate receiver must supports CEC pass through and should be HDCP 2.2 compliant. 48V PoH built in allows the transmitter to be powered from a compatible transmitter.

SITC of HDMI and DisplayPort w/ 3.5mm Stereo input HDMI and HDBaseT output - 70m Max Distance Automatically switches input to active video RS232, Auto, and Dry Contact Closure for control of device PoH (Power over HDBaseT) or 24V DC local power Display Control Software to control TV or projector with RS232 commands - automatically turns display on/off Customizable power management system when not in use

SITC of eight input by eight output HDMI 2.0 matrix switcher with HDCP 2.2 support and capable of handling resolutions up 4K@60Hz 4:4:4 / 8 bit color with static and dynamic HDR output support for each channel. The matrix features advanced independent EDID management control for each HDMI input as well as an Easy EDID analyzer. The analog and digital audio outputs can be set to follow the HDMI video route or can be independently routed either by API or web control interface. Built in re-clocking circuitry ensures the switcher is backwards compatible with sources with older HDMI version chip sets. The matrix switcher can be controlled via front panel buttons, front panel IR, external IR, remote IR, RS232, and Ethernet. The matrix includes a simple IR remote control to allow IR switching. The matrix also features a full command set for RS232 and Ethernet control with third party control systems, plus control via web user interface.

SITC of USB transmitter which can extend up to 2 x USB 2.0 peripherals for 50 meters, The transmitter should be Gen USB 2.0 while being fully backways compatible with USB 1.1 with Data Transfer Rate Up to 480 Mbps shared between all ports. Should be Complete Plug and Play, it supports all operating systems (Windows, MacOS, Android, Linux); NO additional driver or software required to be recognized by the computer. The transmitter (if required) should be able to extend power by the same single power source using Power Over Cable (POC).

SITC of USB receiver which has USB -B port for 50 meters, The receiver should be Gen USB 2.0 while being fully backways compatible with USB 1.1 with Data Transfer Rate Up to 480 Mbps shared between all ports. Should be Complete Plug and Play, it supports all operating systems (Windows, MacOS, Android, Linux); NO additional driver or software required to be recognized by the computer.The receiver (if required) should be able to extend power by the same single power source using Power Over Cable (POC).

SITC of Video Wall Controller, Multiviewer, Seamless high-speed FPGA and cross-point switching design, Up to 8 x input sources Up to 8 x input sources can be displayed simultaneously to LCD wall or LED wall with any size and at any position, even can support portrait and landscape Display, Windows Support seamless switch with no black field,the switching time is less than 5ms. Eachwindow should be freely placed in the outputscreen with no boundary limit Seamless, Design Support Audio and Video integrated switching, Input Resolution: 1920x1200@60 Hz, 3840x2160@Hz, HDMI Type A, Output Resolution- 1920x1200@60Hz, 3840x2160@60 Hz, HDMI Type A, Color Space 4:4:4 RGB, Color Depth- 24-bit, Operation Temperature -20 to 50 deg cel., Control way- RJ45, RS232, Button Control with front panle, MTBF- 100,000 hrs, Integration/programming with software (lifetime free) of Video Wall and its controller with Audio system,Control system, Switcher in such way that zero latency/delay in Video and Audio

AUDIO Systems

Front Of House Speaker:- SITC of biamped, coaxial two-way point source loudspeaker with a minimum 12-15" LF driver and compression driver with 3" or better Voice coil. Frequency Range (-10dB) of 60Hz - 20kHz or better. Power Handling (Peak) 2800 W (LF) + 720 W (HF) or better. Sensitivity (SPL/1 W @ 1 m) 96 dB or better. The Loudspeaker module shall have a Max. SPL (Peak) of MF/HF>= 131 or better. It should have Horizontal dispersion pattern of 110º or better, vertical dispersion of the loudspeaker shall be 60 degrees or better. The loudspeaker shall be enclosed in a baltic birch plywood enclosure with perforated steel grille. Colour should be black or as suitable to interiors.

Stage Monitors Speaker:- SITC of Passive coaxial two-way point source loudspeaker with a single 8-12" LF driver and compression driver with 1.7" or better Voice coil. Frequency Range (-10dB) of 75Hz - 20kHz or better. Power Handling (Peak) 2400 W or better. Sensitivity (SPL/1 W @ 1 m) 94 dB or better. The Loudspeaker module shall have a Max. SPL (Peak) of 128 or better. It should have Horizontal dispersion pattern of 110º or better, vertical dispersion of the loudspeaker shall be 60 degrees or better. The loudspeaker shall be enclosed in a Multi angle baltic birch plywood enclosure with perforated steel grille and monitor tilt back angle of 35 degrees. Colour should be black or as suitable to interiors.

Speaker Brackets for all speaker fixing:- SITC of fabricated GI pipe Class B Suspension Bracket C shape to fixed the Spekaer above the stage- Bracket shall be in ceiling suspended with three /four suspended support from ceiling and C shape design -as per approved by Engineering Incharge ( Reference Drawing attached)

Subwoofer Speaker:- SITC of multipurpose subwoofer with a single 15" neodymium LF driver. Frequency Range (-10dB) of 35Hz - 130Hz or better. Power Handling (Peak) 2800 W or better. Sensitivity (SPL/1 W @ 1 m) 90 dB (free-field) 96 dB (half-space) or better. Calculated SPL(peak) of >=124db or better. The loudspeaker should have a nominal impedance of 8 ohm or more. The loudspeaker shall be enclosed in a baltic birch plywood enclosure with perforated steel grille. Complete with installation as per the site requirement and approved by Engineer incharge. Colour should be black or as suitable to interiors.

Control Room Monitor Speaker Amplifier: SITC of intregrated Stereo Class D amplifier with output of 2 X 50 W @ 4 Ohms, 2 X 25 @ 8 Ohms; frequency response of 40Hz to 20kHz; THD <0.3%; Shall include priority override and Fire alarm interface and necessary loudspeaker EQs. The dimensions of the Amplifier should not be more than one Rack unit (1U).

SITC of Dual Channel Digital Wireless Receiver Microphone Basestation:24-bit digital audio Latency 3.2 ms Frequency Range 20 Hz to 20 kHz Dynamic range 118 dB , Total Harmonic Distortion <0.02%, Audio Output : 1/4" Balanced and XLR Balanced Mic/Line Switch 30 dB pad, Phantom Power Protection 1/4" (6.35 mm): Yes , XLR: Yes Network Interface Single Port Ethernet 10/100 Mbps Network Addressing Capability DHCP or Manual IP address, Maximum Cable Length 100 m (328 ft) Power Requirement : 15 VDC @ 600 mA, 44 MHz tuning bandwidth, 32 available channels per frequency band, Digital predictive switching diversity Easy pairing of transmitters and receivers over scan and IR sync, Remote monitoring and control via app The dimensions of this device should not be more than one Rack unit (1U).

SITC of Headset condenser microphone Wearable wireframe headset fits securely and comfortably Lightweight and low-profile form Type : Electret Condenser,Frequency Response : 40 Hz to 20,000 Hz,Polar Pattern : Unidirectional (Cardioid) Audio Output Level -59.0 dBV/Pa,Maximum SPL : 153.0 dB, Dynamic Range : 114.0 dB,Headset Cardioid Condenser Microphone with Snap-fit Windscreen and TA4F (TQG) Connector,Must be compatible with wireless bodypack transmitters from same OEM

SITC of Low-profile Supercardioid Lavalier (Lapel Collar) Microphone , Type : Condenser Polar Pattern : Supercardioid, Frequency Response : 70 to 20,000 Hz, Sensitivity : -47 dBV/Pa, Maximum SPL : 144 dB SPL, Dynamic Range : 121 dB Each Lavalier microphone must have TA4F connector. The tie clip should be rotatable in 90° intervals for accurate positioning. Must be compatible with wireless bodypack transmitters from same OEM

SITC of Digital Wireless Bodypack Transmitter Microphone Unit The transmitter shall include a bodypack transmitter The bodypack shall use the TA4M connector as the microphone connection. 24-bit digital audio Latency 3.2 ms, Frequency Range 20 Hz to 20 kHz Maximum Input Level 8.2 dBV (2.57 Vrms, 7.27 Vpp) Preamplifier Equivalent Input Noise (EIN) –118 dBV 44 MHz tuning bandwidth, 32 available channels per frequency band,Digital predictive switching diversity Easy pairing of transmitters and receivers over scan and IR sync, Up to 8 hours from 2 nos. 1.5V AA batteries Housing PC/ABS, The transmitter shall have a toggle power on/off switch, The transmitter shall have a high-contrast OLED display indicating channel name, battery status, and frequency. Must be compatible with receivers from same OEM

SITC of coaxial antenna cable should have BNC type connector, 50 ohm impedance, should run up to 100 feet. Must be from same OEM as the Microphone Transmitters & Receivers.

SITC of Wideband antenna distribution system with power cables should allow for the expansion of wireless microphone systems by splitting one pair of antennas to multiple receivers, should amplifies RF signals to compensate for insertion loss that results from splitting signal power to multiple outputs. System should support up to five wireless receivers, maximum five systems should be used in a two-tiered configuration. System should have five?way RF signal output, should support above wireless microphone receivers, should be with front mounting antenna hardware and rack mounting hardware, should have 4 x DC power feeds, 12 V DC outputs for antenna bias. Output Connector Isolation 30 dB, DC Input Voltage 14 to 18 Vdc, DC Output Voltage -14 to 18 Vdc, 4 connectors, Maximum Current Supply from DC Outputs-1.5 Amps, DC Antenna Voltage- 12 Vdc, impedance- 50 Ω, RF Input/output Antenna Connector Type-BNC. Must be from same OEM as the Microphone Transmitters & Receivers.

SITC of Gooseneck Microphone (Phantom Powered) : 18 inch Long Gooseneck Microphone, Must have Mute switch, Must have LED Status indicator, Preamp must be inbuilt in the Microphone, Type : Condenser (electret bias), Frequency Response : 50 Hz – 17 kHz Polar Pattern : Supercardioid, Sensitivity : –33.5 dBV/Pa (21.1 mV), Maximum SPL : 122.7 dB Equivalent Output Noise : 26.5 dB SPL, Signal-to-Noise Ratio : 67.5 dB, Dynamic Range : 96.2 dB Common Mode Rejection : 45 dB minimum (10 Hz – 100 kHz), Preamplifier Output Clipping Level 1% THD : –6 dBV (0.5 V), Mute Switch Attenuation : –50 dB minimum, Power Requirements : 11 – 52 Vdc phantom, 8.0 mA

SITC of Adjustable Microphone Stand, All-purpose microphone stand that’s perfect for the studio or the stage Height adjustable for 90-148 cm, Material- Stainless Steel.

SITC of 24-channel Analog Mixing Console: Mixing channels : 24 Line Inputs (16 mono and 4 stereo) GROUP : 4 GROUP Buses + ST Bus AUX : 6 AUX Sends + 2 FX Sends MATRIX : 1 Matrix out On-board processors : FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) Mic inputs : MIC: 16 (INPUTS HPF: 100Hz 12dB/oct) Phantom power : 48V phantom power per channel Line inputs : LINE: 16 mono + 4 stereo, CH INSERT: 16 RETURN: 1 stereo Digital I/O : USB Device, iPod / iPhone Total harmonic distortion : 0.02% (20Hz-20kHz@ +14dBu) Frequency response : +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz Equivalent input noise : -128 dBu Equivalent Input Noise Residual output noise : -92 dBu Residual Output Noise Crosstalk : -74dB @ 1kHz Power requirements : 100-240V 50Hz/60Hz Dimensions :- 33" (W) X 7" (H) X 23" (D) approx.

SITC of Customised Floor Box with 2-XLR In, 1-XLR Out, 1-Speakon, 2-HDBT, 1-RX Wallplate (2 Gang )as per approved By Engineering Incharge

SITC of Customised Wallplate 2 XLR-In , 2-XLR Out as per approved By Engineering Incharge

Control Systems

SITC of Control Processor with Upgraded single-core processor; Two bidirectional RS-232 serial ports with software handshaking; Network switch: 1 unmanaged 3 port switch; Data rate : 10/100/1000Base-T, half/full duplex; SDRAM Memory: 1 GB or more; Flash Memory: 8 GB or more; Ports:- 1 bidirectional RS-232, RS-422, RS-485, 2 bidirectional RS-232; Digital I/O: 4 or more digital input/output; 2 or more programmable unidirectional RS-232 port; 4 or more Relays ports.Integration/programming of Control system in such way for zero latency/delay in operation/command.

SITC of Wireless Touch Panel, Size- 10 inch or better, 10th generation or Better, LED backlit Multi‑Touch display with IPS technology, 2360-by-1640-pixel resolution at 264 pixels per inch (ppi), 500 nits brightness, along with locking base kit, Including cutomised/as per requirments GUI application/softwear tool for the control system- to control Audio,Video,Switchers, Light control on same Touch Panel.Integration/programming of Touch panel and Control system/periphery devices in such way for zero latency/delay in operation/command.

SITC of Dual-band Access Point with Multi-Gig PoE

SITC of 40x1G PoE+ 960W and 8xSFP+ Managed Switch

Cabling ,Connectors

Supply, installation, testing & Commissioning of 2 core 14 AWG/2.5 Sq mm, Twisted, unshielded Speaker cable with stranded annealed bare copper conductors, Semi-rigid PVC insulation, NEC CL3R, CEC CMG, RoHS compliant ,including layig through rigid 20 mm dai 1.3 mm thick Precision make PVC conduit fixed in cable tray or wall/reccess mount with saddle with all required acessoried .

Supply, installation, testing & Commissioning of 2 core 12 AWG/4 Sq mm, Twisted, unshielded Speaker cable with stranded annealed bare copper conductors, Semi-rigid PVC insulation, NEC CL3R, CEC CMG, RoHS compliant , Including layig through rigid 20 mm dai 1.3 mm thick Precision make PVC conduit fixed in cable tray or wall/reccess mount with saddle with all required acessoried .

SITC of 4 pair shielded/foiled TIA/EIA-568-C Category 6A cable with 23AWG or better Solid annealed bare copper conductors, High-density polyethylene insulation, Flame rated PVC jacket, Overall aluminum/poly foil shield with drain, NEC CMR, CEC CMR FT4, RoHS compliant, Including layig through rigid 20 mm dai 1.3 mm thick Precision make PVC conduit fixed in cable tray or wall/reccess mount with saddle with all required acessoried .

SITC of 2 core Twisted, shielded balanced Audio and control cable with 22AWG or better 7 strand annealed bare copper conductors, Semi-Rigid PVC insulation, Riser rated PVC jacket. UL 444, UL 13 CMR rated, Including layig through rigid 20 mm dai 1.3 mm thick Precision make PVC conduit fixed in cable tray or wall/reccess mount with saddle with all required acessoried .

SITC of 6' (2 mtr.) High Speed HDMI with Ethernet cable for 3D, 4K, Deep Color applications and installations, 18.0Gbps Bandwidth to support 4K60 4:4:4, shall Support ARC, and all HDCP levels, HDR Certified by HDMI ATC, RoHS, REACH, and TAA Compliant,

SITC of 15m 18G HDMI Active Cable/ Gold Plated & LGrip-Connector/Oxygen Free Copper.Supports 21:9 true Cinema

SITC of Connectors with end termination,Patch Cords and Accessories-XLR,Phono,Stereo,HDMI,RJ45,ect

SITC of 42U Enclosure Frame Rack for Audio Video system elements,Front Glass door-Lockable Toughened Glass Door,,Back door Hexagonal Perforated Door,Casters Set of 4,FHU with 4 FAN 360CFM,Power Distribution Unit - Two Number dual input Vertically Mounted 230 Volt PDU, 32AMPs with 25 power outputs on each side,Cable manager, Powder coated stell material fame and side walls,Load bearing capacity 500 kg or max,Colur-Black

SITC of Online UPS 10KVA 3Phase input and 1phase output supply with inbuilt isolation transformer incluing external battery bank & rack with all connection Battery circuit braker, 30 min full load backup,supply and installation with input , output, and battery connection as per site requirment,With BIS/ISI certification, Preffered make: Numeric,APC,Vertiv

On site Operation & maintenance Training of entire setup Lighting & Audio-Video system for one month from Qualified Professional Technical person