SPECIAL REPAIRS TO CIVILIAN STAFF QUARTERS AND PROVISION OF AC AND VENLILATION SYSTEM FOR IT BUILDING AT DSSC WELLINGTON

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling of single layer mangalore pattern tiles complete all as specified and as directed.

Dismantling Battens for tiles, shingles etc, exc 15cm any size including tilting fillets complete all as specified and as directed.

Dismantling weather boarding of any description fixed in any position with nails complete all as specified and as directed..

Dismantling of wall and ceiling boards, (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets

Dismantling timber scantling 40sq.cm and over in section, in any position in unframed work all as specified and as directed.

M&L for Steel work in tubular trusses and MS tubes including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any ( Trapozoidal pattern of any approved make) colour having tensile strength of 550 mpa as in roof covering fixed with self tapping screws or J hooks as specified.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof for ridge ,Eve board etc fixed with self tapping screws/J hooks as specified.

M & L for 2nd class hard wood timber scantling of any size or in any position such as truss,purlin etc and if in repairs, to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store

M&L for Providing Gypsum board False ceiling using 12mm thick Gypsum board panels of size as approved by GE, fixed with staples on powder coated standard galvanized iron snap grid frame work of size suitable to fixing Gypsum board using 'T' and angle sections made out of 0.5mm thick PGI sheet, grade of zinc coating 220, bent to shape required as in main member, secondary member, perimeter angle section including provn of G I channel suspender fixed to roof members at the rate of 1200mm c/c and interspaced at 610mm c/c, the main fixing channel shall be fixed through fasteners clips as per manufacturer's instructions with and including plaster of Paris decorative type cornice all around at the junction of wall and ceiling including taking down and refixing of electrical fittings etc., complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include the cost of taking down and refixing of the electrical fittings such as ceiling fan, light fittings etc., and keep in safe custody of same till refixing.

M&L for Preparing of gypsum board false ceiling with primer and applying 3 mm thick wall care putty and applying two coat of OBD over one coat of primer complete all as manufacturer instructions of asian paint limited or equilavent in nerolac/Berger as approved by GE complete all as spd and as directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, and removing from site, complete all as specified.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each and removing from site, complete all as specified.

M&L for Pressed steel frames of size 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed

M&L for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed

PCC type B-0 (1:2:4) using (12.5mm graded aggregate) as in filling of steel chowkats or frames complete all as specified and as directed by Engr-in-charge.

S & F 40 mm thick factory made, flush shutters of solid core consturction block board core and plywood face panels on both sides and covered with decorative face vaneers on both sides with lipping /frame to match

S & F IInd class HW of 35mm thick factory made glazed and skeleton shutter open rebated and prepared to receive glass,gauge,etc.edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass,etc; The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated as specified and directed byEngr in charge .

M&L for preparing surfaces of small articles such as hold fasts etc area not exc. 0.10 sqm each and treated with tar or coat tar black paint.

S&F MS work as in hold fast etc conforming (Fe-290 Gde-165) complete all as specified and directed

M&L for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm overall length of cover plate, fixed in floor complete all as specified and directed

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed

S & F butt hinges 100mm size MS cold rolled medium weight all as specified.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long.

S&F aluminium alloy sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm.

S&F aluminium alloy sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 200 mm.

S&F alum anodised handles, fabricated type of size 150 mm

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer all as spd and directed.

UPVC Ventilators: Supply & fix UPVC ventilator with profiles for construction of UPVC Ventilator frame will be of overall size 60mmx58mm with wall thickness 2.7+/- 0.2mm extruded sections.The corners will be plastic welded. The hinge side vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2mm The ventilator will be fixed to walls using 8mm dia MSscrews min 2 nos on each side. The 3 nos of pinned glass will be placed in slots provided in ventilator. Glazing: The ventilator will be glazed with 5mm thick pinhead glass. Note: The etire fixing will be done as per manufacturers instructions and specification and as directed by Engr-in charge,.

M&L for MS structural steel work, framed as in grills, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete as directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, and inclucing 5.5mm thick glass and Wire netting of stainless steel wire 1.4mm dia with size of mesh 12mm complete all as specified and directed by Engineer-in-Charge. (shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. ®

S&F Solid PVC Door Frame of size 50mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be painted to match with prelam sheet complete as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm PVC Sheet on back face with wood free EPS complete as specified and as directed. Make : Sintex or equivalent in Rajashri plastwood/Poly windows/Dura plast extruction as approved by GE.

Supply and fix in repairs 18mm thick High Density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc., complete all as specified and as directed.

S&F Continuous (Piano) hinges brass, bright finish width of flaps 40mm

S&F extruded brass handle fabricated type 150mm size and complete all as specified and directed

Supply and fix in repair Magnetic closer of suitable size for cupboards fixed with screws complete all as specified and directed.

S&F 150 mm long, Aluminum anodised barrel tower bolts, of extruded section complete as specified and as directed.

S&F of stainless steel cupboard cabinet lock with 2 keys

M&L Precast cement concrete type C1 1:3:6 (Using 20 mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed.

M&LPrecast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid solid blocks 10cm width and setting in mortar(1:6) complete as specified and as directed.

M&L for rendering 15mm thick cement plaster 1:4 on concrete surfaces using water proofing compound of finished fair and even(Note WPC shall be measured and paid separately)

Rendering 10mm thick in cement mortar 1:6 on fair faces of stone surfaces finished even and smooth with out using extra cement.

Supply only integral water proofing compound all as specified.

Dismantling of floor, hearth or wall tiling incl cement mortar bedding and rubbish off the premises.

Demolition of cement concrete in ground foors and paving not exc. 15 cm thick (below or above ground level) all as spd and directed.

Demolition of cement concrete in ground foors and paving exc. 15 cm thick complete as specified and as directed.

Taking down cement plaster, any description, on brick or stone walls, etc. including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, and brushing neat cement slurry with 3.0kg of cement per sq.metre.

M&L for matt finished joint free Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15 mm thick screed bed in CM 1:6 etc complete as in flooring all as specified and directed.

Description all as per item No. 51 above, but in skirting etc and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 10mm thick backing coat in CM (1:4) including triangular filleting in CM 1:4 on top of tiles complete as specified and as directed.

M/L for non skid coloured ceramic tiles ( of any colour) flooring 7 to 8 mm thick area of each tile exceeding 0.06 sqm and not exc 0.11 sqm with joint free tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick cement screed bed in CM 1:4 complete as specified and as directed.

M&L glazed ceramic tiles in vertical surface of size 300x200x7mm thick set and jointed in neat cement slurry pointed in white or coloured cement to match including 10mm thick backing coat in CM 1:3 complete as specified and as directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & including 20mm thick screed bed etc complete as in flooring all as specified and directed.

M&L for Peparation of new plastered or unplastered surfaces of walls and applying two coats of Oil bond distemper white or tinted over one coat of alkali resistant primer over 3mm thk wall care putty all as specified and directed.

M&L for Complete removal of existing treament from old plastered or unplastered surfaces of walls and applying two coats of Oil bond distemper, white or tinted over one coat of alkali resistant primer over 3mm thk wall care putty complete all as specified and directed.

M&L Preparing newly plastered surfaces on external walls and applying one coat of exterior wall putty for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti-algal weather proof paint complete all as per manufacturer instruction as directed.

Complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying one coat of exterior wall putty for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti-algae weather proof paint complete all as per manufacturer instruction as directed.

Prepartion of old wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

S&F MS fancy type decorative drapery rod 20mm dia incl side caps and single/double brackets, as in repairs including end bushes complete all as specified.

Taking up or down carefully steel tubing and connection s including cleaning for refixing or removal to store of size 15mm dia bore

Taking up or down carefully steel tubing and connection s including cleaning for refixing or removal to store of size 20mm dia bore

Taking up or down carefully steel tubing and connection s including cleaning for refixing or removal to store of size 25mm dia bore

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc. of 15mm dia bore Make:TATA/LEADER/PRAKASH

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc. of 20mm dia bore Make:TATA/LEADER/PRAKASH

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc. of 25mm dia bore all as specified and as directed. Make:TATA/LEADER/PRAKASH Note: Cost of GI/MS Clamps to be fixed at an inter

Refixing of old GI steel tubes and connections of 15 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections of 20 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections of 25 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Cutting chases, pinning in making food to facings where required and pointing in CM 1:4 for consealed water tubing etc complete

S&F as in repair vitreous china wash basin, white flat back size 550x400mm excluding taps, waste chain and plug and proclain stopper but including bracket.

S&F in repair central Hole Basin Mixer without popup waste system with 450mm long complete all as specified and as directed.Make-Jaquar CON-309KNMor Equivalent

S&F pillars taps CP 15mm dia of long body cast copper alloys of fancy type screwed down high pressure with long screwed shanks and flynuts screwed for iron pipe and fixed in repairs all as directed by EIC.

S&F in repair wall mixer 3-in-1 system with provision for both hand shower and OH shower complete with 115mm long bend pipe, connecting legs & Wall Flange (without hand & over head shower) Cat No CON-281KN Make - Jaquar or equivalent in Cera/Hindware/Parryware all as specified and directed by Engr-in-Charge

S&F viterous china wash down water closet (EWC) pedestal pattern incl trap and connection to waste pipe and flushing cistern incl seat cover and PVC flush pipe 32mm complete in repairs.

S&F for 10 litres capacity PVC flushing cistern high level including ball valve inlet & outlet connection 15 mm dia PVC pipe with check nuts on both ends, PVC waste pipe 32 mm upto WC connection and GI 15 mm dia overflow pipe upto floor level all as specified

S&F in repairs Bib cock (Two in one) with health faucet multi type including flexible hose complete all as specified and as directed.Make-Jaquar CON-041KN&ALD-565

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450mm all as specified and as directed.

S&F high density polythene pipe 40mm dia blue in colour HDPE at pressure rating 6kg/cm2 fixed complete to wall or floor incl bend tee elbow etc for waste pipe at wash basin /flush tank.

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and as directed.

S&F bib taps of cast copper alloys chromium plated fancy type, screwed down screwed for iron pipe or for brass fenule and fixrd for 15mm dia pipe inclduing removing the old unserviceable bib taps fixed in repairs.

S&F in repair 15mm dia Angular stop cock with wall flange Cat No CON 053 KN Make - Jaquar or equivalent all as specified and directed by Engr-in-Charge

S&F in repair soap dish holder of Jaquar Cat No.ACN - 1131N OR EQUIVALENT in CERA /Hindware/Parryware all as specified and as directed.

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc all as complete and directed.

Taking down Cast iron / PVC pipe 110mm jointed in cement mortar taking out of wall. including all fittings, heads, sheos, bends, swan-necks, etccomplete all as specified and as directed.

Demolition and breaking up 150mm dia SGSW pipes set in cement mortar and taking out of trenches complete all as specified.

M&L 200 mm bore PVC(SWR) Pipe single socketed, in any length with rubber ring joints layid in trenches/floors completed all as specified and as directed.

Material & labour for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they laid and tested in cement concrete 1:3:6, type C2, 200mm bore pipe all as specified and as directed

M/L in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors as spd and directed.

M/L in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors as spd and directed.

S&F PVC (SWR) bends plain 110 mm bore

S&F PVC(SWR) bends plain 75mm bore

S & F PVC (SWR) bends any radious 110 mm bore provided with acess door.

S & F PVC (SWR) bends any radious 75mm bore provided with acess door.

S & F PVC (SWR) vent cowl 75 mm bore

S&F PVC (SWR) vent cowl of size 110mm bore dia complete all as specified and as directed.

S&F in repair 75 mm dia PVC floor trap with cockroach trap and grating (double bowl type) of size 150 x 150 mm with hole for waste pipe in grating including jointing to waste pipe complete all as specified and as directed. Make:Prayag catno:119

S&F in repair 100 mm dia PVC floor multi trap with and grating of size 100mmx100mm complete all as specified and as directed.

S&F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , inlcuding bedding in cement mortar to dwarf wall or providing cantilever brackets, PVC waste pipe and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm, complete all as specified.

S & F in repair Single lever sink mixer with swinging spout, wall mounted model with connecting legs and wall flanges complete all as spd and directed Make- Jaquar Cat No CON-309KNM or equivalent in Hindware/Cera/Parryware as approved by GE

S&F in repair over head shower 100m dia round shape single flow(ABS Body Chrome plated with gray face plate) with Rubit cleaning systemconnected to 15 mm bore pipe complete all as specified and as directed..Make-Jaquar OHS1989.or Equivalent

S&F in repairs corner racks with glass with brass brackets chromium plated railings Make. Jaquar Cat No ACN - 1173 or equivalent in Cera/Hindware/Parryware all as specified.

Dismantling of structural steel work including door gates, grill, framed truss etc.

S & F rolled mild steel section conforming to grade E-165 (Fe-290) framed work as in door or gates of angle or other section with gusset plates rails , braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, fastening, etc complete all as directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide all as spd and directed.

M&L Providing precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) set in cement mortar 1:6 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves,cooking platform and similar articles with plain faces complete as specified and as directed.

Supply and fix Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columy hooking ends and binding with and including mild steel wire (annealed) not less than 0.9m dia or securing with clips all as specified and as directed

Demolition of brick work, built in cement mortar complete as specified and as directed.

M&L plain cement concrete 1:4:8 type D2 (40 mm graded aggregate) as in foundation filling and mass concrete all as specified and as directed.

M&L Hardcore of broken stone are boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L PCC 1:4:8 type D-2 using 40mm graded Aggregate in sub base 75mm thick.

M&L PCC 1:2:4 type B-1 using 20mm graded Aggregate in floor 50mm thick.

M&L cement concrete1:3:6 type C-2 (40mm graded aggregate) 75 mm thick as in Plinth protection/and pavings finishing cement concrete surface even and fair without using extra cement.

Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces.

M&L for reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.5mm aggregate) for lintels upto 1.5m clear span ,as in filling of steel chowkats or framesand chajjas complete all as specified and directed.

Extra forming fair finished drain or channel inner girth n.exc 30 CM in cement, concrete using extra cement including forms, moulds, mitred/stopped ends etc complete.

M&L for PCC 1:2:4 type B1, using 20mm graded aggregates as in roof kerbs, coving on chajjas & benching all as specified. (including water proofing compound wherever required, WPC shall be paid separately)

Demolitionof reinforced concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work

Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base to floor 75 mm thick all as specified and directed.

M-Sand filling under floor laid in layers n.exc 15 cm thick spread ,levelled and rammed , watering and compacted complete.

M&L for Machine pressed precast conctete interlocking paver block with grey cement and pigmentany shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 Grade

Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge. Note:Old existing Surface Mounting down light/ Bulk Head light fittings of any type taken down/dismantled to be deposited to MES E/M Storeyard and cost of transportation of the same from site of work to MES E/M Storeyard is deemed to be included in the unit quoted rates.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge.

Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and directed by Engr-in-Charge.

NOTE for Item Nos 124 to 126 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.

M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed forOne Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps.: Make of cable : Havells/Polycab/Finolex.Make of conduit-Precision/Bajaj plast/finolex

Description all as Item No.127 but for One switch socket outlet point 5/6 Amps on independent board.

Description all as per Item No.127 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete.

NOTE for Item Nos 127 to 129 : 1) Modular metal flush boxes shall be measured & paid separately. 2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.

M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.00) sq. mm + (1 x 4.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Bajaj plast/finolex.NOTE for item No 6: 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.2) Cutting chases & making good, including necessary Putty work of the disturbed surfaces is deemed to be included in the unit quoted rates.

S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular Bell Push switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSBXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACTXMIIX01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACTXMIIX03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 4 modules all as directed. Cat No : ACTXMIIX04, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACVPPCWV03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 4 modules all as directed. Cat No : ACVPPCWV04, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor

NOTE for Item Nos 131 to 141: The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/CG/Anchor

S&F in repairs call Bell, AC, Bull Bull Chim type 230 Volt.Make: Anchor, Code-8432 or techno-commercially equiv in Legrand/Havells

S&F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings all as specified and as directed. Make : Havells, Cat No:LUMLINE+BS10WLED865SPCSS or techno-commercially equiv In Jaguar/Philips

S&F Surface and wall mounted LED batten 20 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittingsall as specified and as directed.. Make :Havells, Cat No:STOUTPLUS 600BS20WLED857SPCWH or techno-commercially equiv In Jaguar/Philips

S&F decorative wall mounting fixture luminaire with PC diffuser suitable for lamps with B22 with all accessories internally prewired and including necessary wiring/cabeling alterations of auto make the fitment completely capable for use as Engagement light & connecting up complete all as specified and as directed. Make: Havells, Cat No:LHLDDDEBIA5R009, Model - Florentine or techno-commercially equivalent in Philips/Jaguar

Supply and fixing in repairs LED lamps 9W, 3000K with B-22 base cap all as directed by the Engr-in-Charge Cat No: LHLDDEBIA5R009 of Make Havells or techno-commercially equiv In Jaguar/Philips

Supply and fix Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W or min 800 lumens with IP 66 with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed. Make:Havells, Cat no HEXAFT10WLED857SSYMBOPC or techno-commercially equiv In Jaguar/Philips

Supply and fix energy saving high power LED building security light of 25W made up of pressure die cast aluminum housing with embedded PC cover having TOP Opening seperate driver compartment with IP66 protection including 40mm dia bracket bended into 120 degree angle and making connections in flexible conduit all as directed. Make: Cat no ENDURASUNDOWNSL25WLED757PASYBOPCIHD Endura Sun Down of Havells or techno-commercially equiv In Jaguar/Philips

Imp Note for Item Nos 144 to 149 : 1) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.

M&L for taking out the existing energy meters, cleaning and fixing, connecting & testing of the same in the FRP Junction/enclosure box/same location, in arrangement as directed by Engr-in-Charge and stickering the name of the corresponding Qtr No complete all as directed by Engr-in-Charge.

S&F FRP enclosure of size 250(L) x 250(W) x 105 (D) approx or next higher size with locking arrangement and making flush to the wall, fixing one No of Energy meter (For Servant Qtr) inside with suitable accessories complete all as specified and directed by Engr-in-Charge. Make: Sintex, Model No GSMB-2525 or techno-commercially equivalent in Hensel/Rittal/OBO.

Taking down carefully electrical geysers of capacity upto 25 ltrs by unscrewing nuts and bolts from clamps, disconnecting electrical connections and PVC cold/hot water connections and keeping serviceable geysers in safe custody/MES store yard and refixing the same location after dusting,cleaning complete all as specified and directed by Engr-in-Charge. Note: The cost of transportation/depositing the geysers to MES storeyard is deemed to be included in the unit quoted rates

Supply, install, testing & commissioning of Exhaust fan, PVC body with connected accessories 250 mm sweep, single phase, 240 Volts, AC, 50 Hz,800RPM, Air delivery not less than 860 CMH, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air DX or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates

Supply, install, commissioning & testing of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator/other surfaces etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DB or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates.(ii) The cost of transportation of old unsv Exfan to MES storeyard is deemed to be included in unit quoted rates.

S & F SPN DB, 12Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN012 DD or techno-commercially equiv in Legrand/Siemens

S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make-L&T, Cat No-BB20320C or techno-commercially equivalent in LEGRAND/SIEMENS.

S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA. Make-L&T, Cat No-BB10320C or techno-commercially equivalent in LEGRAND/SIEMENS.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI strip of size 32X6 by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 40mm bore medium grade GI protection pipe (upto 7.5mtr long) for earth and 20mm GI medium grade for watering including PCC chamber pit & cover with suitable lifting hooks, with funnel, wire mesh, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified including taking out the existing u/s earthing accessories. Note: On testing after completion, if the desired earth resistance is not obtained the earthing shall be redone at no extra cost till the entire satisfaction of Engr-in-Charge. . Make of GI Pipe : TATA/Jindal/Prakash

M&L for galvanised steel water tubing, medium grade, 15 mm bore with all running fittings such as bends, tees, unionss, elbows, connecting pieces etc. fixed to walls/floors etc. incl testing complete all as specified and to the entire satisfaction of the Eng-in-Charge. MAKE : Tata/Jindal/Prakash. Note : Cost of GI/MS Clamps to be fixed at an interval of 1.0 Mtr whereever GI Pipes shall be fixed on walls/floors is deemed to be included in the unit quoted rates.

S&F 4 mm dia GI wire as earth continuity conductor incl connection complete with the help of chromium plated washers, nuts etc. to MCB TPN DB etc.

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, Armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4 Core 16 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge. Make: Havells/Gloster/Polycab.Note: Removing of old Un-serviceable LT UG Cable is deemed to be included in the unit quoted rates.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m depth for errecting of poles, Laying of cables and getting out in hard/dense soil complete all as specified.

Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm in depth in hard/dense soil.

Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point all as directed.

Supply and laying sub class 'B' bricks of size 230 x 115 x 75 mm laid across the cable for cable protection, above sand complete all as specified and directed.

Supply and laying Medium grade GI Pipe (ISI Marked) of 50mm dia for cable protection to be fixed on wall/in trenches with necessary clamps or in road crossing,complete all as directed(Rate qouted shall include MS clamps of required size wherever pipes are to be fixed on walls/other surfaces). Make:Tata/Jindal/Prakash

M & L for cutting the existing hard standing /PCC /WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing top not less than 25 cm thick cement concrete type C-1 (1:3:6) using 20 mm grade aggregate, bottom filled with excavated earth and finishing to a uniform smooth surface complete all as specified and directed.

Supply, spreading and compacting of Riddled sand in trenches for cable cushion on both top and bottom of cable, including ramming complete all as specified and as directed by Engr-in Charge

S&F Modular RJ 11 Tele Jack double with shutter, 1 M. Cat No : 5748 46 of make Legrand or techno-commercially equivalent of Havells/Polycab/Anchor Roma

S&F Modular TV Co-Axial Socket, 1 M. Cat No : 5748 51 of Make Legrand or techno-commercially Equivalent of Havells/Anchor Roma

M&L for 20mm (external dia) Rigid non-metallic medium grade PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. Make of Conduit : Precision/Bajaj Plast/Modi/Press-fit

Taking up or down carefully steel tubing and connections from wall/floor etc., for replacement of pipes size 25mm dia all as specified and as directed. Note: Supply and fix GI pipe will be measured separately.

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc. of 25mm dia bore all as specified and as directed. Make:TATA/LEADER/PRAKASH Note: Cost of GI/MS Clamps to be fixed at an interval of 1.0 m on walls/floors is deemed to included in the quoted rates.

S&F Gun-metal, globe or gate valves, 25mm bore with iron wheel head, screwed both ends for iron pipe and fixed to iron pipe including testing and taking down old one complete all as specified and as directed.

M & L for Concealed sub-main wiring alongwith earth wire of size of 4 x 10.0 sq. mm + 1 x 10.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non- metallic rigid PVC medium grade conduit and accessories ISI marked of appropriate size/thickness on walls/other surface etc. incl making good the disturbed surfaces as per original complete all as specified and as directed. Make of cable : Havells/Polycab/Finolex. Make of Conduit : Press-fit/Finolex/Modi/Precision NOTE : (i) Two runs of PVC wire, one run of earth wire & one run of casing-capping will be measured as one length. (ii) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth. (iii) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

S&F single pole & neutral enclosure with a two pin & earth plug & socket complete with one single pole MCB "C" curve of 20 A rating, 10 KA incl making good the disturbed surfaces as per original complete. Make : L&T/SIEMENS/LEGRAND.

&F MCB, TPN, C-Series 240 Volts of capacity 63 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make : L&T/SIEMENS/LEGRAND.

Supply, install, commissioning & testing of hi wall, split-type Air Conditioner Unit of capacity 2.0 TR or higher rating based on Inverter Technology comprising of variable speed copper compressor suitable for adjusting power depending on heat load incl indl indoor & outdoor units complete with cordless remote control unit & with in-built stabilizer free operation & PM 2.5 Filter etc. for better indoor air quality with 5 star rating incl electric connection complete all as specified and as directed. Make : VOLTAS/ILOYD/DAIKIN/HITACHI.NOTE : (i) The Air Conditioner shall be initial filled / charged with refrigerant of specified quantity & the refrigerant to be used shall be Non-CFC type & as per the latest technology. (ii) The cost of additional refrigerant pipes required (if any) is deemed to be included in the unit quoted rates. (iii) Suitable piping of adequate length & size for drainage of condensate water from indoor unit shall be provided & the cost of the same is deemed to be included in the unit quoted rates. (iv) Cost of staging & shed/weather-proof arrangemets required for fixing/ installation of the outdoor units is deemed to be included in the unit quoted rates. (v) Anything missed out in the technical specifications but technically required for efficient working of the AC is deemed to be included in the unit quoted rates. (vi) Contractor should visit the site before quoting tender for confirming the of site requirement.

Supply, install, commissioning & testing of wall-mounted copper wound voltage stabilizer, ISI marked for automatic operation, single phase, naturally air cooled, indoor type & designed for I/P variation between 160 V to 260 V with Digital Voltmeter & O/P voltage stabilization at 230 V with accuracy of +/- 2.5%, with high & low voltage cut off & time delay & of capacity 5.0 KVA suitable for 2.0 TR Inverter AC incl electric connection complete all as specified and as directed. Cat No : VCDW-04160 of make Volina or technocommercially equivalent of Sen & Pandit/V-Guard.

S.RAMACHANDRAN

KGP BUILDERS

Sree Constructions