REPAIR AND MAINTENANCE OF PERIMETER SECURITY LIGHTS/STREET LIGHTS,POST TOP LANTERN LIGHTS , LT UG CABLE AND FEEDER PILLAR BOXES INCL SOME MISC E/M WORKS AT AF STN MAMAURA

Amount

Dismantling and taking down carefully defective/non fuctional street light fittings of HPSV/LED/Halogen/Metal halide/T-5/CFL/post top lantern etc from its existing position and refixing the same after repairing/replacement of burnt wire/ connection , including re-assembling and testing complete all as specified and directed.

Supplying and fixing in repairs/replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed flexible two core cable flat or circular of size 4 Sqmm stranded aluminium conductor all as specifiied and directed.

Supplying and fixing in repairs/replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed flexible two core cable flat or circular of size 6 Sqmm stranded aluminium conductor all as specifiied and directed.

Supplying and fixing in repairs/replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed flexible two core cable flat or circular of size 10 Sqmm stranded aluminium conductor all as specifiied and directed.

S&F Junction box made out of MS steel of size 300x300x150mm complete with 100 Amp 3 phase & one neutral rated aluminium bus bar with MS clamp of size 35x6mm MCB single 5 to 32 Amps inside box and fixed on pole with MS clamps, nut bolt and washers including taking down of existing unserviceable all as specified and directed by EIC.

M&L for taking down Unserviceble XLPE cable of different sizes all as specified and directed by EIC.

Laying/Relaying of old serviceble cable XLPE insulated PVC sheathed armoured 1100 volt grade heavy duty ISI marked with aluminium conductor as obtained from ser item No 5 here-in-before with providing all new joints with proper lugs for sizes 16 Sqmm 4 core in trenches complete all as specified and directed

---Ditto--- as item no 7 above but size of 25 Sqmm 3.5 core

---Ditto--- as item no 7 above but size of 35 Sqmm 3.5 core

Supply, laying and testing of LT cable 1100 volt grade XLPE insulated underground electric cable PVC bedded and sheathed steel wire/strip armoured aluminum stranded conductor of size 16 Sq mm 4 core complete all as specified and directed .

Ditto all as per Item No.10 here in before but size of cable 25 Sq mm 4 core

All as per item No.10 here-in-before but size of 35 Sqmm 3.5 core

All as per item No.10 here-in-before but size of 50 Sqmm 3.5 core

All as per item No.10 here-in-beforee but size of 70 Sqmm 3.5 core

All as per item No.10 here-in-before but size of 95 Sqmm 3.5 core

All as per item No.10 here-in-before but size of 120 Sqmm 3.5 core

All as per item No.10 here-in-before but size of 150 Sqmm 3.5 core

M&L for find out the electric fault in LT under ground cable by hiring the high voltage micro processer based accurstic type vehicle mounted cable fault location machine from market for pointing out the exact fault and including earth work etc as required and directed by Engr-in-Chrage.

Excavation in trenches not exc 1.5 meter in depth and not exc 1.5 meter wide including getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including leveling spreading watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed .

Removing of surplus soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and as directed.

M&L for spreading clean dry sand in cable trenches for cushioning of cable protection complete all as specified and directed. (Note : Sand shall be measured after hand punning).

M&L for Bricks(using sub class ‘B’, old size) laid in trenches as in cable protection complete all as specified and directed.

Supply and replacement of old HPSV/MH/CFL street light with LED street light fittings 60 watt EDGE warm white complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 protection including connecting wire of length not less than 7.5 meter by 2.5 sqmm Copper wire, twin core PVC insulated complete all as specified and directed. Make - BAJAJ cat part No.BRLEP 60 W LED V2 or equivalent modle of CROMPTON / PHILLIPS/C&S/Havells

Supply and fixing LED driver sutable for fixing in 45 to 70 Watt LED street light fittings complete all as specified and directed .

supply and fixing in replacement LED high power CUB flood light fitting 50 watt LED 5000 k complete such as fixing arrangement,wiring connection complete all as specified and directed . Make CROMPTON / PHILLIPS/C&S / HAVELLS.

Supply and fixing LED bollard in rectangular vectori design withh opal acrylic diffuser and IP 65 protection complete all as specified and directed . Make Bajaj Model No-BGBOS 600 9W LED or equivallent n Havells /Cromption/C&S

S&F in replacement GI pipe 50 mm medium grade with all fitting laid in trenches or laid in floor/road for cable protection complete all as specified and directed.

S&F in replacement GI pipe 40 mm medium grade with all fitting laid in trenches or laid in floor/road for cable protection complete all as specified and directed.

M&L painting of LT steel tubular pole any type of size externally above foundation and junction box including all MS work with one coat of aluminium paint after scraping /cleaning well the existing rusted surface including numbering of poles. complete all as specified and directed by Enginreer -in - charge . Note : The item included in the painting 3 Nos 30 cm wiide bands blue synthetic enamel paint in alternate layer upto 1.5 mtr high above foundation and writing the pole No in 5 cm wide with HT/LT.

M&L for shifting of street light poles from the existing position and re-fix the same poles as per the site requirement ,including necessary exacavation and PCC 1:3:6 cement concrete complete with CI base plate and finial including foundation and coping complete all as specified and directed be EIC.

Supply & fixing straight through joint cold shrinkable of size 10 Sqmm to 25 Sqmm 2/4 core LT cable 1100 volts Make : M-seal/Cab Seal/Rechem

Supply & fixing straight through joint cold shrinkable of size 35 Sqmm to 50 Sqmm 2/4 core LT cable 1100 volts Make : M-seal/Cab Seal/Rechem

---Ditto--- as item no 33 above but size of 70 Sqmm to 120 Sqmm 3.5 core

---Ditto--- as item no 33 above but size of 150 Sqmm to 400 Sqmm 3.5 core

Disconnecting & taking down old existing unserviceable MCCB of any description and in any position complete all as specified and directed by Engineer-in-Charge.

supply and fix in replacement of MCB capacity 6 to 32 Amps SP 240 Volt AC Type 'C' 10KA complete all as specified and directed .

Supplying and fixing MCCB, 200 Amps, 4 pole, 415 Volts, AC supply, having breaking capacity Icu = 36 KA with adjustable load setting from 80 % to 100 % complete all as specified and directed . Make L&T/C&S/Legrand.

Supplying and fixing MCCB, 100 Amps, 4 pole, 415 Volts, AC supply, having breaking capacity Icu = 16 KA with adjustable load setting from 80 % to 100 % complete all as specified and directed . Make L&T/C&S/Legrand.

Supply, installation, commissioning and testing of Bus bar chamber of suitable shape and size as approved outdoor cubical type (400 Amps , 415 volts, 50 Hz, 3 phase, 4 wire supply) floor block mounted, factory made, dust and vermin proof (Protection class IP-54) made out of 50 mm x 50 mm x 4 mm angle iron frame and 3.15 mm thick, MS CRCA sheet with front hinged opening, rubber lining, locking arrangement, painted externally and internally providing one coat of anti corrosive coating and finally epoxy powder coating of flint grey shade (RAL-7032) on all steel surfaces complete all as specified and directed .

VINAYAKA (INDIA) MULTIFARIOUS SERVICES PVT LTD

Unnati Engineers

m/s pal associates