Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.1 CrAccepted-AOC 7C GOVIND NAGAR MATHURA | MATHURA | ₹17.1 Cr | L1 | Accepted-AOC Preparation Bond for Rs. 171014051.00 Only |
| 2 | L2₹18.4 CrRejected-Finance | ₹18.4 Cr | L2 | Rejected-Finance Rejected due to higher Rates |
Tender Value
₹19.3 Cr
EMD Value
₹30 L
Closing Date
12 Jan 2022, 12:30 pmClosed
Superintending Engineer
Office Of The Superintending Engineer Agra Circle 198 Takkar Road Pwd Agra
Upgradation and Beautification of Road From Multilevel Parking to Welcome Gate (Raman Reti) Under State Smart City Scheme in Vrindavan in Distt. Mathura
2022_CEAGR_672138_1
6887/14M-AC/2021 dt 13.12.2021
Open Tender
Civil Works
270 days
Mathura
Construction Work
2 documents required · 2 mandatory
₹2,336
₹30 L
Yes
Agra
15 Jun 2022
6 Jan 2022
13 Jan 2022
6 Jan 2022
12 Jan 2022
6 Jan 2022
7 Jan 2022
Amount
Earth work in excavation in foundation in ordinary soil (loam, clay, or sand) including lift upto 1.5 m and lead up to 30 m and including filling watering ramming of excavated earth in to the trenches or in to the space between the building and the sides of the foundation trenches or into the space between the building and the side of the foundation or in the plinth and removal of surplus earth as directed by E/I upto a distance of 30m.from the foundation trenches 1
Extra Item No. 251 to every additional 30m lead of part of 30m (100ft) or for every additional 1.5m lift or part of 1.5m
Provides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and under floors.
RCC work providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforcement of Reinforced concrete or reinforced brick work brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its waistage Bend, hooks, Binding wire and authorized over lapping shall be measured upto floor two level etc complete.
Constructing brick masonary chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) Precast RCC cover with frame (Heavy duty) 455x610 mm internal dimensions fixed with brick masonary, foundation concrete 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1 :3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design (a) Inside dimensions 455x610 mm and 450mm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation M-150 :
Extra for depth beyond 45cm of brick masonry chamber for size 455 x 610 mm
Providing orange color safety foot rest of minimum 6mm thick plasteic encapsulated as per IS :10910 on 12 mm dia steel bar conforming to IS:1786, having mimimum cross section as 23mm x 25mm and over all minium length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm treat on top surface by ribbing or chequerring besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacturer permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x5 cm cement concrete block (1 cemnet : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design.
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5. Rectangular shape 600x450 mm internal dimensions
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal)
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 160 mm dia (OD-160 mm & ID-135 mm nominal)
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 200 mm dia (OD-200 mm & ID-175 mm nominal)
Providing and fixing PVC pipe conforming to IS make working pressure 6kg/sqcm including testing labour T&P and all complete fittings. 110mm diamater
CI Jaali 100 x 100 mm
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete.
Earth work in 5 km cartage & cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge.
Providing and laying at or near ground level factory made kerb stone of M-20 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge. (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Size 12" x 18" x 6"
Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade and undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75Ltr/l0sqm coat curing and cost of all material; labour, T&P etc. required for proper completion of work for two coat.
Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : Red sand stone
Extra for stone work ashlar sunk or moulded or sunk and moulded or carved in : Triangular or Square or rectangular pillars
Extra for stone work ashlar sunk or moulded or sunk and moulded or carved in : Circular or polygonal pillars
Extra for stone work ashlar sunk or moulded in cornices.
Providing and installation of Pbed Outdoor Plastic Dustbin of capacity 80 ltr. Cylindrical or rectangular in shape standing with stand and of different colours as per direction of Engineer in charge.
Mild steel or iron work in heavy sizes such as trusses, built up gates record rack, roof work gates etc, brought to required form including drilling holes, riveting or welding where necessary, and also including supply of steel bolts, nuts, wastage etc, and their fixing require for proper completion of work.
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m²
Providing and fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threded fittings. This includes jointing of pipes and fittings, with one step CPVC solvent cement, trencing, refilling & testing of joints complete as per direction of Engineer-in-charge. External Work (20mm dia - for water ATM)
Providing and fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threded fittings. This includes jointing of pipes and fittings, with one step CPVC solvent cement, trencing, refilling & testing of joints complete as per direction of Engineer-in-charge. External Work (32mm dia)
Providing and fixing RO System 500 LPH (forbes pro water solutions) – including all complete as per Engineer-in-Charge
Wall made of MS framing 38x38mm square pipe fixing with both side cement fibre board 8mm thick including 58 x 58mm MS columns in between 25mm glass wool insulation and false ceiling made of MS framing 38x38mm square pipe fixing with cement fibre board 8mm thick and roof made of MS framing 38x38mm square pipe fixing with 12mm marine board aluminium sheet on top in between false ceiling and roof providing 25mm glasswool insulation and door made of 32mm solid bwp flush door and window made of bombay sliding window with MS safety grill and floor made of MS framing 38x38mm with 16mm cement fibre board on top and wiring complete with kalinga (gold) make modular switch and socket Ketco make and paint finish with waterproof texture coating inside and outside. Portable cabin of size 6ft x 8ft x 8ft (H) with false floor and false ceiling complete.
Construction of Granular Sub Base by Providing Granular Material, spreading in uniform layers with Motor Grader on prepared surface, mixing by mix in placed method with Froont & Loader at OMC and compacting with Vibratory Roller to achieve the desired density, complete as per clause 401
Providing and laying Dense Graded Bituminous Macadam with higher capacity batch type Hot Mix plant using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 4.50% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth Wheeled vibratory & Tandom Rollars to acheive the desired compaction as per MORT&H Specifications clause 505 Complete in all respects.
Providing and applying tack coat with bitumen (VG-10) using emulsion pressure distributor at the rate of 0.30 kg per sum on the prepared bituminous surface cleaned with mechanical broom.
Providing and laying Bituminous Concrete with Higher capacity batch type Hot Mix Plant using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 5.40% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth Wheeled vibratory & Tandom Rollars to acheive the desired compaction as per MORT&H Specifications clause 507 Complete in all respects.
Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge.
40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. - RED SAND STONE
Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) - 25mm thick
Red Sand Stone work for wall lining etc. (Veneer work) 30mm thick in cement mortar 1:3 (cement:coarse sand) includingcamping jointing in white cement mortar 1:2 (white cement:stone dust)with an admixtureof pigment matching the stone shade
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (MARBLE WORK)
Supply and fixing chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand).
Painting two coat over priming coat on Steel and other metal surfaces up to 10 cm width or girth or small articles not exceeding 0.10 sq.m in area with superior synthetic enamel such as luxol-3, Hi-gloss, apcolite, Superior, Duplex specified brushing to give an even shade and including cleaning the srface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all material, labor, tools and plants etc, required or proper completion of the work.
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc.complete as per direction of Engineer-in-Charge.
Class M150 (non Modular) brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work.
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.
Class-150 (non Modular) brick work but in in 1:4 cement and coarse sand mortar super structure above plinth level upto floor five level (upto five stories) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12 cm.
White washing with lime on undecorated wall surface (Two coat) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar drop and loose scales of lime wash and other foreign matter.
Theme painting on boundary walls and flyover pillars with Artistic Acrylic colours including all materials, labour, T&P ectc req for proper completition of work.
Supply and installation of decorative pole as per Lustre Item No. Li-NM-778. The total height of pole is 5m nominal above ground. The bottom section of pole is of 140mm dia x 2000mm long x 4.8mm thick and top section of the pole is 89mm dia x 3000mm long x 3.2mm thick including 90mm long with reduced dia on the top as per Luminary entry. A service window with proper strengthing to cut out door shall be provided to accomodate a 6amp SP MCB and 32 amp heavy duty connector for mains connections in the bottom part of the pole. Pole shall be installed at desired location including 1:3:6 cement concrete foundation with the help of anchor bolts and 38mm GI sleeve as required complete as per direction of E/I.
Supply and installation of 120W LED post top LED lumanarie as per Lustre Item No. Li-50034-120. Luminarie is made of Cast and spun aluminium an dfitted with polycarbonate/PMMA/Glass diffuser. The size of pot top luminarie are 445mm width and 1000mm height. Luminarie shall be installed on top of decorative pole complete as per direction of E/I.
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S.clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(10 sqmm 4 core)
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S.clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(25 sqmm 3.5 core)
Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactoresm HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25 A TPN
supply and burring of Safe Earthing Eelctrode T-19,(Hot Dip Galvanized )Length up to 3000mm, outer Dia 50mm inner Dia 25mm,terminal Dia12mm,outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with cryztalline conductive mixture (CCM) having anti corrosive &conductive property with 50 kgs activated soil (BFC) Capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. Strip, upto switch board (from apron to switch board, the cost of G.I.strip will be extra) along with 30 cm square C.I. frame with hinged cover & mansonry housing. Make: As approved in U.P.P,W,D.,&C.P.R.I.Certified.,
Making suitable earthing of street light pole with 2.5 m long 20mm dia M.S. Rod with 7/16 SWG GS wire in 15mm dia 2.0M long GI pipe duly clamped with 2 nos. of clamps and binding on pole including cost of labour & T&P.
Supply and laying of 32 mm X 6 mm G.I. strip from earth electrode diretly in the ground as required complete in all respect.
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment)
Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment).
Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.
Complete maintenance of trees (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department and other T & P material/articles shall be provided by the contractor) and as per direction of officer in charge. Trees for 250 no/(up to 4 & up to 3 year Slow & Fast growing group)
Providing and wartering of irrigation water through water tanker of Horticulture features i.e. lawn, tree, shrubs, hedge/edge, ground cover etc. at the site of work. Water tanker having 5000 lit. capacity with one labour for watering i/c cost of water, filling of tanker, wartering at site with all leads and lifts as per direction of officer-in-charge.
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) (Trees Plant )
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) (Shrubs Plant)
Removal of garden waste by TATA 407 or equivalent including loading/ unloading and carriage upto 1 km lead,complete disposal upto designated place as per direction of officer-in-charge .
Pruning, trimming, shaping of trees /shrubs (ht 15 feet and above) i/c removal of cut materials upto 50mt. Lead, as per direction of officer in charge. T&P shall be arranged by the contractor.
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : HOLES 45CM DEEP, 45 CM DIA
Providing and stacking of Ficus blackii (F.vivion) (bushy) of height 150-165 cm. with 8-10 branches and healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge.
Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 34 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.
Providing and stacking of Cestrum nocturnum (Raat ki Rani) of height 60-75 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge.
Providing and stacking of Hamelia patens of height 30-45 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge.
Providing and stacking of Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.
Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge.
Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge.
Providing and stacking of Tecoma stans of height 45-60 cm. branched in earthen pots of size 20 cm as per direction of the officer-in-charge.
Providing and stacking of Ipomoea purpurea (Morning glory) of height30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge.
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 60 cm dia, and 60 cm deep
Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
Providing and stacking of Callistemon lanceolatus of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.v
Providing and stacking of Asparagus marrie, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
Providing and stacking of Iresine herbstii, of height 20-25 cm. full of branches well developed in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
Providing and stacking of Setcreasea purpurea full of variegated leaves in 15 cm size of Earthen Pot/Plastic Pot as per direction of the officer-in-charge
Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge.
Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-charge. External Work. 75mm nominal inner dia pipe
P.T.M.T. extension nipple 20 mm dia
Providing and fixing PTMT stop cock of approved quality and colour. 20 mm nominal bore, 89 mm long, weighing not less than 88 gms
Providing & fixing of Sprinkler 3/4 ” .
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). (All works upto plinth level)
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). (All works above plinth level pto floor V level)
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
6mm ceiling plaster 1:3 (1 cement : 3 fine sand in F.M. not less than 1.25, 1:3 including chipping of RCC surafce before ceiling plaster. The cost of including all material, labout T&P and scaffolding etc. complete.
12mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
Providing and fixing 10 mm thick acid and/or alkali resistant tiles 300x300 mm size of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tiles ,
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12mm
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (For Granite Work)
Providing and laying Vertified Tiles in floor of 600x600mm sizes (thickness 10mm) with water absorption less than 0.08% and confirming to IS: 15622, of approved brand manufacture, in desired colour and shades, laid with cement based high polymer modified quit set tile adhesive (water based) confirming to IS :15477, including grouting of joints including preparation of 75mm thick base with concrete 1:4:8 complete as per E/I
Providing and laying Vertified Tiles in floor of 600x600mm(anti skid tile) sizes(thickness 10mm) with water absorption less than 0.08% and confirming to IS: 15622, of approved brand manufacture, in desired colour and shades, laid with cement based high polymer modified quit set tile adhesive (water based) confirming to IS :15477, including grouting of joints.
(a) P/L 18mm Black Granite stone (super quality) flooring over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry including rubbing and polishing complete.
Providing and laying integral cement base water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm ofcement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab adjoining wall upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken brick bats 25mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining heights upto 300mm height including rounding of junctions of walls and slabs. (c) After two days of propoer curing applying a second of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed water proofing compound conforming to IS 2645 and approved by Engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300 x 300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test . All above operations to be done in order and as directed and specified by the Engineer-in-charge with average thickness of 120 mm and minimum thickness at khurra as 65mm
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
Providing & fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15mm x 15mm for top and bottom rails. M.S. frame shall have a cost of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC "C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on both sides forming styles and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top & bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both sides of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet be provided as gap insert for top & bottom rail. panelling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm + 2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. Top bottom rails shall be provided both sides of the panel. 10mm (5mmx2) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail panelling of 5mm thick both side PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with 7mm (5mm + 2mm) thick x 15mm wide PVC sheet beading on inner side and jointed together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C channel using PVC solvent adhesive etc complete as per direction of ENgineer-in-charge, manufacturere's and drawings and specifications.
Distempering (Two coat) with oil bound distemper of approved brand and manufacture and of required shade and undecorated wall surface to give and even shade over & including a priming coat with cement primer of approved brand and manufacture such as Berger. J&N Shalimar, Asian paints after thoroughly brushing surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth including cost of all materials.
Theme painting on boundary walls and flyover pillars with Artistic Acrylic colours including all materials, labour, T&P ectc req for proper completition of work.
30 mm red sand stone sun shade (chisel dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse sand), including finishing complete.
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound onforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per sqm of area (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)
Providing and fixing water closet squatting pan (Europen type W.C. pan ISI mark) with seat and lid 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS :7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern W.C. pan of size 580x440mm with integral type foot rests including stop cock complete in all respect.
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.F. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap .with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: range of four half stall urinal with 10 litre PVC. automatic flushing cistern
Providing and fixing wash basin (ISI mark) with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White vitreous china chine wash basin size (630X450) mm with single 15mm cp brass pillar tap.
Providing and fixing flexible waste pipe 40mm dia
Providing and fixing S.C.I. gully or nahani grating 100 mm dia as per direction of Enginner-in charge
Providing and fixing Stainless Steel jali of 100x100mm sqm / 100 mm dia
Providing & fixing P.V.C. pipe fittings T bend sockets, M.S. holdler clamp all complete. (140mm dia)
Providing & fixing P.V.C. pipe fittings T bend sockets, M.S. holdler clamp all complete. (90mm dia)
Providing and fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threded fittings including fixing with clamps at 1m spacing. This includes jointing of pipes and fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. Concealed work, including cutting chases and making good the wall etc. (20mm dia)
Providing and fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threded fittings including fixing with clamps at 1m spacing. This includes jointing of pipes and fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. Concealed work, including cutting chases and making good the wall etc. (32mm dia)
Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). (32mm dia)
Providing and fixing PTMT bib cock of approved quality and colour, 15mm nominal bore, 86 mm long, weighing not less than 88 gm
Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 gms
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500 x 700 mm internal dimension 45 cm deep for pipe line with one or two inlets : with common burnt clay F.P.S. (non modular bricks of class designation M-150, total weight of cover with frame to be not less than 38kg ( weight of cover 23 kg and weight of frame 15kg), RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand : graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregaet 40 mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design.
extra for depth beyond 45cm of brick masonry chamber
Supply and fixing Water storage tank P.V.C syntax or equivalent make including float value, connecting Rod of brass, etc all complete.
Providing and fixing mirror of superior glass and of rectangle 453 x357mm in size with plastic moulded frame of approved make and shade with 6mm thick hard board backing .
Supply and fixing surface/Flush mounting 12 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A
Supply and fixing of 0.5 Amp to 5 Amp. SP MCB (10KA) C Curve
Supply and fixing of 6 Amp to 32 Amp. SP MCB (10KA) C Curve
Supply and wiring of submain with two number 6 Sq.mm FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with one number 14 SWG copper earth continuity wir etc. complete in all respect.
Supply & burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), length upto 3000mm, outer dia 50mm, inner dia 25 mm, terminal dia 12mm, outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization upto 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm GI strip, upto switch board (from apron to switch board, the cost of GI strip will be extra) along with 30 cm square CI frame with hinged cover & masonry housing. Make : As approved in UP PWD & CPRI certified.
Wiring point for light in 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid PVC conduit pipe concealed in the wall complete with 14 SWG copper earth continuity wire, GP Box, piano type switch & ceiling rose /angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash.
Add for light/fan points with modular type switch in place of piano type switch.
Wiring point for plug with 1.5 sqmm. FRLSH P.V.C. insulatled multistrand core copper conductor cable as earthwire drawn in the conduit complete with 14 SWG copper earth continuity wire, GP box piano type switch and socket etc. complete in all respect including matching colour wash.
Add for plug points with modular type switch and socket in place of piano type switch and socket
Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175 mm x 100 mm x 50 mm size with phenolic laminated bakelite sheet cover 3mm thick fixed brass machine screw and cup washer.
Supply and wiring of submain with two number 4 sq. mm FRLSH P.V.C. insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty 2mm thick PVC conduit partly concled in wall and partly laid in slab along with Reinforcement before concreting with one no. 14 SWG GI earth contunity wire including colour wash etc. Completed in all Respects.
Supply and fixing of 16 Amp. 240 volt D.P. metal clad rewireable type switch fuse unit of M.D.F.E.G./Teak wood board complete in all respects.
Supply and wiring of submain with two number 2.5 sq. mm FR P.V.C. insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty 2mm thick PVC conduit partly concled in wall and partly laid in slab along with Reinforcement before concreting with one no. 14 SWG GI earth contunity wire including colour wash etc. Completed in all Respects.
Supply and fixing of recess/Surface/Pendent mounting round 10 Watt 15 Watt LED Down Lighter having Power coated die, cast aluminium housing with heat sink, diffuser/Reflector and driver set comlete in all respect. CAT- AAA
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). With Single Bulb Included in Rate Note: Truck Mounted rotary/TMR/Tubewell boring machine shall not be used . (500mm dia pile)
Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter(only the nos. of extra bulbs are to be paid) (500mm dia pile)
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer incharge. Single pile above 50 tonne and upto 100 tonne Safe capacity Initial test (Test Load 2.5 times the Safe capacity)
Lateral load testing of single pile in accordance with IS Code of practice IS : 2911 (Part IV) for determining safe allowable lateral load on pile : Upto 50 tonne capacity pile
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position all complete.
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts (10 x 60 mm)
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts (10 x 80 mm)
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts (10 x 120 mm)
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts (10 x 140 mm)
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts (10 x 160 mm)
Designing, Providing, installing and fixing factory finished customed design pregalvanized high tensile steel joists manufactured from G350 Z275 confirming to IS:277-1992, minimum coating of galvanizing 275 gm/sqm, minimum yield stress 35 MPa & minimum tensile strength of 380 MPa placed 1.23 metre apart to support the load of slab etc as per the design & directions of Engineer-in-Charge.
Providing and fixing special adjustable lockbars of mild steel E-250 to support the temporary plywood for work between joists during construction as per design & directions of the Engineer-in-charge.
Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately).
Kota stone slab 20mm thick in riser of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar (1:3) (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
SITC of 10 passenger-680 kg Elevator, 2 stops with machine room less as per specification - KONE all complete as per direction of Engineer-in-charge.
SITC of Travel Master TM120 Excalator (TM-100-30-3-1.5/1.0-6000), having width 1000mm, vertical riser 600mm and inclination 30 degree with speed 0.5m/sec having transportation capacity 6000P/H as per specification - KONE all complete as per direction of Engineer-in-charge.
Dismantling sundries brick work including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet).
Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet).
Dismantling reinforced cement concrete or reinforced brick work including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet).
Dismantling cement concrete or brick or granolithic floors including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet).
Dismantling stone flagged or tiled floor including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet).
Dismantling of girders, trusses and other steel work including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet).
Dismantling doors and windows including stacking of materials as directed by Engineer-In-Charge with a distance of 60 meters (200 feet).
Dismantling existing plaster including disposal of refuse as directed by Engineer-In-Charge within a distance of 60 meters.
Scrapping old white or colour wash including disposal of refuse as directed by Engineer-In-charge within a distance of 60 meters (200 feet)
Dismantling of flexible pavment and disposal of dismantle material upto a lead of 1000meters, stacking seviceable and unseviceable materials separately.
Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.
Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
Cartage of malba from site upto 10km distance complete inluding loading unloading as per direction of Engineer-in-charge.
Cleaning jungle including uprooting of trunk vegetation grass, bushes, wood trees, and sapling of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50m out side the periphery of area cleared.
Jeevan Construction Company
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid