Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹37.8 L+₹39,085 (1.05%)Rejected-Finance 411 STREET NO 4 PANCHVATI NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹37.8 L+₹45,010 (1.20%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹37.9 L+₹51,022 (1.36%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹38.0 L+₹63,800 (1.71%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
1 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandimandir
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-19/2022-2023 REPAIR AND MAINT OF BLDGS OF WCSR, WCCSR, PRO UNIT, 04 OFFRS MESS, WAR GAME CENTRE AND MISC UNITS UNDER AGE B/R I AT CHANDIMANDIR
2022_MES_525809_1
GE/CHM-19/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹80,000
Yes
13 Aug 2022
23 May 2022
8 Jul 2022
23 May 2022
1 Jul 2022
7 Jun 2022
Amount
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
Demolition of cement concrete of any description in any position not otherwise specifically provided for complete all as specified and directed.
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed
Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.
Demolition of stone slabs of any description in floors laid, bedded and pointed in any mortar complete all as specified and directed
Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each and removing from site complete all as specified & directed.
Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
Glazed and gauged Skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Factory made plain framed panelled shutters, 35mm thick (with two panel) of 2nd class hard wood with lock rail and panels of 12mm thick commercial ply duly hammer marked. The size of rail & style shall be as per IS 1003 Part-I Kiln seasoned and chemically pressure treated including a shop coat of pink primer complete all as specified & directed.
Flush shutters 30mm thick factory made solid core construction with block board core and ply wood face panels commercials type on both side complete all as specified & directed.
taking down and re-fixing of shutters of any description exc 1 sqm but n.exc 2 Sqm each in same opening after securing or easing & adjusting complete all as specified & directed.
Factory made pressed steel frames of profile width 105mm x 60mm fabricated from 1.25 mm thick sheet, for doors with double rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of priming, and back filled with PCC 1:3:6 type C-1 complete all as specified.
Factory made pressed steel frames of profile width 125mm x 60mm fabricated from 1.25 mm thick sheet, for doors with double rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of priming, and back filled with PCC 1:3:6 type C-1 complete all as specified.
Steel window, box type, in repair one shop coat of primer, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 03Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.
All as per serial item No 17 hereinbefore but without glazing bar.
Steel ventilator factory made with top hung shutter including hinges, steel peg stay, a shop coat of red oxide zinc chrome primer, fixed as in repair complete all as specified and directed.
Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squared tube, fixing in opening at site all as specified & directed.
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.
Hacking out old broken glass ( any thickness) size quality etc from metal frames fixed with pin, beading or oil putty complete all as specified and directed.
3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Galvanized MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.
Galvanized MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed as in repair complete all as specified and directed.
12mm thick pre laminated particle board , exterior grade, pre laminated both side with decorative choice lamination fixed to aluminum frame work etc, complete all as specified and directed .
Dismantling boarding any description fixed in any position with nails complete all as specified & directed.
18/19mm thick pre laminated particle board (ISI Marked), in repair interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination as in cup board, kitchen cabinets shutters etc, including 6mm thick teak wood lipping fixed with nails, complete all as specified and directed .
Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame, in repair as per specifications complete all as directed
5mm thick PVC sheet fillet of width for wall paneling inclusive of fixing on to wall to make PVC Frame, in repair as per specification and drawing complete all as directed by Engineer-in-charge.
10mm thick PVC insulation panels, in repair with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed.
Non skid, joint free ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Glazed ceramic tiles in vertical surface 350 x 250 x 7mm / 450x 350 x 7mm thick, joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Non skid, joint free first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Vitrified coloured tiles, jointless, first quality, of size 600mm x 600mm x 10mm thick as in floor, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Machine cut Kota Stone Slab flooring, etc. 20-25mm thick, best quality over and including cement screed bed 20mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and directed.
All as per serial item No 37 herein before but on skirting etc over and including 15mm thick rendering in cement mortar 1:4
Coloured non skid porcelain tiles exterior grade 300x300x9-10mm thick heavy duty (Endura from Johnson or equivalent) as in floor, set and jointed in neat slurry and pointed in coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in cement mortar 1:6, including taking out of old tiles, complete all as specified and directed by Engineer-in-charge.
Interlocking paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, including dismantling of old paver block and removal of debris t of any description complete all as specified and directed
Interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, including dismantling of old paver block and removal of debris t of any description complete all as specified and directed
Concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade, and including laid over 25mm thick sand cushioning, including dismantling of old paver block and removal of debris t of any description complete all as specified and directed
Factory made coloured chequered cement concrete tiles 300mm x 300mm x 25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
Plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 75mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.
Brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.
Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.
15mm thick rendering in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. (Where directed 3% WPC shall be mixed as per manufacturer instructions and WPC shall be measured and paid separately as “Supply only”)
15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
10mm thick rendering in Cement and Sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces) finished even and smooth without using extra cement, complete all as specified and directed.
Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of Chalk whiting on plastered surfaces, preparatory to distempering complete, all as specified.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
Three coats of white wash on ceiling surfaces including preparation of new surfaces complete all as specified and directed
Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.
18-20mm thick baroda green marble stone slabs, width and length as ordered, best quality machine cut and granite polished to be fixed on flooring etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab over and including screed bed 15mm thick in cement mortar 1:4 complete including rubbing and granite polishing complete all as specified and directed.
Rounding of / moulding to edges of stone of any description including rubbing and polishing (Granite finish) complete all as specified and directed.
Grinding and machine polishing of old kota / Granite stone in flooring, grindig and hand polishing in dado, skirting, risers & steps using fine grade blocks (nos 120 followed by 320) and final finish with Bee Was polish complete all as specified and directed.
20mm thick granite slab (of any type & shade as approved), as on cooking platform, counter slab, steps, jambs, pillars etc (length and width as ordered by GE in one piece) best quality machine cut and jointed with gray cement slurry and pointed in white cement mixed with pigment to match the shade of slab laid over and including 20mm thick screed bed in cement mortar 1:4 including rubbing and polishing to granite finish, rounded edges (mirror finish), in repair complete all as specified and directed.
Cleaning and removing all scale and dirt etc from overhead water storage tanks of capacity exc 250 but n.exc 500 litres and from mouths of circulating pipes etc including disconnecting & fixing in same position complete all as specified and directed.
Cleaning and removing all scale and dirt etc from overhead water storage tanks of capacity exc 500 but n.exc 1000 litres and from mouths of circulating pipesetc including disconnecting & fixing in same position complete all as specified and directed.
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
2000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered (ISI Marked) hoisted and fixed in position, including float / ball brass valve 20mm bore & tank nipple, fixed as in repair complete all as specified. MAKE : SINTEX/ DIPLAST/ UNIPLUS/ AQUAPLUS.
PVC cover suitable for water storage tank capacity exc 250 ltrs but n.exc 500 ltrs, including necessary tightening with screw etc fixed as in repair complete all as specified and directed.
15mm bore Gun-metal, globe or gate valves(Quarter turn), with MS lever handle, screwed both ends for iron pipe fixed in repair complete all as specified and directed.
20mm bore Gun-metal, globe or gate valves(Quarter turn), with MS lever handle, screwed both ends for iron pipe fixed in repair complete all as specified and directed.
Bib taps brass, fancy type, short body, with wall flange, standard chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Taking up or down steel tubing and connections 15mm bore from walls, floors etc including cutting chases and making good in cement mortar 1:3 complete all as specified and directed
All as per item No. 42 hereinbefore but for 20mm bore -ditto-
15mm dia concealed GI tubing medium grade with all fittings to walls, ceiling or laid under floors including cutting chases and making good in cement mortar 1:3 complete all as specified and directed.
All as per item No. 70 hereinbefore but except GI pipe –ditto-
Supply and fixing for 20mm dia concealed GI tubing medium grade with all fittings to walls, ceiling or laid under floors and making good in cement mortar 1:3 complete all as specified and directed.
All as per item No. 72 hereinbefore but except GI pipe –ditto-
Bib taps brass, fancy type, without flange, foam flow, long body, cast copper alloy chromium plated, fancy type, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Angular stop cock, brass, cast copper alloy, chromium plated fancy type, screwed both ends for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Concealed stop cock, cast copper alloy, chromium plated, fancy type with wall flange screwed both ends for iron pipe or for unions, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Wash hand basin, vitreous china, flat back , white , of size 550X400mm, including angle brackets, fixed as in repair complete all as specified and directed.
Wash hand basin, vitreous china, coloured, oval shape, counter type, of size 550X400mm, CP waste, coupling, 32mm bore pvc waste pipe, PVC connection, angle brackets, fixed as in repair complete all as specified and directed.
Vitreous china bowl urinal flat back, half stall type, white with grating and union for discharge pipe (excluding flushing cistern, flush pipe) fixed as in repair complete all as specified and directed.
PVC valve less syphonic action dual type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity including and 32mm dia PVC long bend for squat pattern WC, set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete, set with cement concrete, fixed as in repair, complete all as specified & directed.
15mm dia PVC connection with PTMT nut, of length 450mm, fixed as in repairs complete all as specified and directed.
Vitreous china, wash down water closet pan, superior white, Pedestal pattern WC with ‘P’ or ‘S’ trap, seat cover (excluding, flushing cistern and flush pipe), fixed as in repairs complete all as specified and directed.
Pillar tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms ) for 15mm bore pipe, complete fixed as in repairs all as specified and directed.
Toilet paper holder, cast copper alloy, chromium plated fixed in position, fixed as in repair , complete all as specified and directed.
100mm dia chromium plated grating, fixed as in repair complete all as specified and directed.
32mm dia PVC waste pipe with PTMT nut, fixed as in repair complete all as specified and directed.
32mm dia waste coupling / waste fitting of PTMT any colour (minimum weight 45 gms), fixed as in repair complete all as specified and directed.
Central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.
Hand jet chromium plated (health faucet with 01 m PVC pipe) for 15mm bore with fittings, fixed as in repairs complete all as specified and directed.
Cast copper alloy, chromium plated towel rail, 20mm dia, 60cm long between flanges fixed as in repair, complete all as specified and directed.
Shelf of PTMT 450mm x 124mm, any colour (minimum weight 300gm) fixed with and including chromium plated brass screws and wooden / plastic cleats fixed as in repair complete all as specified and directed
PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed
110mm bore PVC (SWR) bend any radius fixed as in repair complete all as specified and directed
Central hole Basin Mixer , with regular spout with popup waste system with 450mm long braided hoses,15mm bore, cast copper alloy, chromium plated, fancy type, fixed as in repair complete all as specified and directed MAKE : JAQUAR Cat Part No QQT-7169B or equivalent in JAINKO, PRAYAG
Wall mixer with provision for overhead shower with 115mm long bedn pipe on upper side, connecting legs and wall flanges, 15mm bore, cast copper alloy chromium plated, fancy type fixed as in repair complete all as specified and directed . MAKE : JAQUAR Cat Part No QQT-7273UPRor equivalent in JAINKO, PRAYAG
Two way bib cock with wall flanges, 15mm bore, cast copper alloy chromium plated, fancy type fixed as in repair complete all as specified and directed . MAKE : JAQUAR Cat Part No QQT-7041 or equivalent in JAINKO, PRAYAG
Single piece Water Closet with PP seat cover, hinges, fixing accessories set, cistern fittings, size 360mm x 640mm x 690mm, S Trap-110mm fixed as in repair complete all as specified and directed . MAKE : JAQUAR Cat Part No SLS-WHT-6851S or equivalent as per appx 'C'
Single piece Water Closet with PP seat cover, hinges, fixing accessories set, cistern fittings, size 360mm x 640mm x 690mm, P Trap-180mm fixed as in repair complete all as specified and directed . MAKE : JAQUAR Cat Part No SLS-WHT-6851P or equivalent in JAINKO, PRAYAG
Counter top basin , size 600mm x 400mm x 175mm, fixed as in repair complete all as specified and directed . MAKE : JAQUAR Cat Part No SLS-WHT-6601 or equivalent in JAINKO, PRAYAG
Urinal pot , size 355mm x 345mm x 535mm, fixed as in repair complete all as specified and directed . MAKE : JAQUAR Cat Part No URS-WHT-13261 or equivalent in JAINKO, PRAYAG
Electronic sensor for automatic urinal flush system, battery operated, fixed as in repair complete all as specified and directed MAKE : JAQUAR Product Code SNR-CHR-51097
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.
200mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.
150mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.
Butt hinges, cold rolled steel medium weight 100mm long for fixing to steel chowkhats complete all as specified and directed.
Aluminum alloy, anodized, sliding door bolt 250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy, fixed as in repair complete all as specified and directed.
150mm long aluminum handle cast type anodized , complete all as specified
Mortice lock, verticle type, mild steel, 4 levers, size 100mm, brass body, fixed as in repairs complete all as specified and directed
140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed by Engineer-in-charge.
Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed as in repairs, complete all as specified and directed.
Door closer hydraulically regulated aluminum (dia cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, fixed as in repair complete all as specified and directed.
Framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165, fixed as in repair complete all as specified & directed by Engineer-in-charge.
100mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in hardstanding, finished even and fair, without using extra cement complete all as specified and directed.
Cement concrete type B-1, 1:2:4 using (20 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed. (Cement concrete item shall be reinforced, where ordered. Reinforcement shall be measured and paid separately.
Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t complete all as specified & directed by Engineer-in-Charge
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
Dismantling any type of corrugated or semi corrugated sheets as in roof covering including ridges and walls & removing from site complete all as specified and directed.
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour and patteren as approved by the GE of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.
2mm thick fibre glass reinforced translucent corrugated coloured sheeting with side lap, fixed with ‘L’ type or ‘J’ type or cranked hook, bolts, nuts, bituminous washer as in roof, complete all as specified and directed.
Poly carbonate coloured sheets as approved, 8mm thick as in roofs with adequate size steel screws, washers, nuts, aluminium strip/ flat etc as per manufacturer’s instructions, complete all as specified and directed. Make of sheet shall be GE POLYCARBONATE/TUFF LIGHT.
Powder coated aluminum frame/ chowkhat for doors, windows, partition, ventilator etc in repair with one or more rebates including joinging cleats for fixing etc standard anodized aluminum section, powder coating not less than 50 micron, complete all as specified and directed Note : Shutters shall be measured and paid separately "as supply and fix" under respective items.
Powder coated (thickness or powder coating of any colour coating not less than 50 micron) aluminium door shutters in repair made of aluminium sections including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading, screws etc. complete all as specified and directed by Engineer-in-Charge. Note : (i) Only weight of the aluminium sections shall be measured and paid. (ii) Glass panes and panels shall be measured & paid separately under respective items. Design shall be approved from Engr-in-Charge as existing at site before fabrication and bulk order to the manufacturer.
Supply only 5mm thick plain sheet glass fixed to aluminum frame work with standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels exc 0.5 Sqm in each pane, complete all as specified & directed. Note : anodized aluminum bead, rubber packing, not included in this item and shall be paid under respective items.
Rubber beading for fixing glass panes in aluminium frame work as in repair complete all as specified and directed.
False ceiling with 12mm thick gypsum board of size 595mm x 595mm on and including standard GI snap grid, framed and suspended with 4mm dia wire including clips etc in patterns as approved by GE, in panels of size 605mm x 605mm (GI snap grid consisting of 1mm thick standard GI sections i.e. channel, angle, tee etc for intermediates, parameters etc), fixed in ceiling with necessary fitting and fixtures as per manufacturers instructions, fixed as in repair complete all as specified and directed.
Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) upto height of three storey buidling complete all as specified & directed.
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.
PCC 1:3:6 type C-1 (using 20m graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, complete all as specified and directed.
Rendering 15mm thick (average thickness) rendering on roof surfaces inclduing flashings and junction of oaraoets etc finished even and fair in cement mortar 1:4 using wate proofing compound as per manufacturer's instruction after brushing cement slurry complete all as specified and directed
3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous resistance aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.
40mm thick brick tiles laid on mud mortar and joints grouted and pointed flush in separate operation in cement mortar 1:3 mixed with crude oil @ 5% by weight of cement on mud phuska complete all as specified and directed.
All as per serial item No 134 herein before but except tiles –ditto-
Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning vertical / horizantol surfaces complete all as specified and directed.
Steel rolling shutters (1 mm thickness of lath) with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle fixed as in repair complete all as specified and directed
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified.
Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified.
Preparation of old plastered or unplastered surfaces of walls and applying two coats of exterior acrylic emulsion paint on walls complete all as specified and directed.
Applying wall care putty, on wall surfaces after complete removal of existing treatment & smoothening the surfaces with sand papers etc., (preparatory to OBD/ plastic emulsion/ interior/ exterior emulsion paint as directed) complete all as specified.
Preparation of old plastered or unplastered surfaces of walls and applying two coats of interior acrylic emulsion paint on walls complete all as specified and directed.
Preparation of old plastered ceiling surface and applying two coats of interior acrylic emulsion paint on ceiling surface complete all as specified and directed.
Preparation of old plastered or unplastered surfaces of walls and applying one coat of texture (altex) etc of colour & pattern complete all as specified and directed.
Preparation of old decorated wall surfaces and applying one coat of oil bound distemper complete all as specified and directed.
Preparation of old plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.
One coat of white wash on ceiling surfaces including preparation of old surfaces complete all as specified and directed
Preparation of old plastered or un-plastered surfaces of walls and applying one coat of cement base paint, complete all as specified and directed.
Material and labour for preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
M/s Super Trading Corporation
Premier Constructions
M/s Krishan Aggarwal
M/S CHOPRA & COMPANY
Gunjan and Gunjan Associates
M/s Om parkash
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .