PROVN OF CERTAIN SANCTIONED WORKS UNDER AREA OF AGE B/R-I AT GE SAUGOR

Amount

Excavating in post holes(or similar holes) in hard/dense soil each n.exc 0.5 cum , getting out and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

M & L for Surface exacavation not exceeding 30cm deep and average 15cm deep and getting out in soft/loose soil etc complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep in hard/dense soil for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 sqm on plan and getting out complete all as specified and directed.

Excavation over areas n.exc1.5m deep and getting out in soft/ loose soil complete all as specified and directed.

Returning filling in incl spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Removing excavated materials (soil) to a distance exc. 1.50 km and deposting where directed, at a level n.exc. 1.5m above the starting point complete all as specified.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for hardcore of broken boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in mass concrete as in foundation filling and mass concrete complete all as specified and directed.

M & L PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, filling, mass concrete, sub-floors, floors etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in copings/ bands and benching, in roof kerbs or mud stops,rounded and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub bases of floors, etc finished the surface even and rough to receive the topping layer complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-1 (using 20mm graded stone aggregates) as in plinth protection surface finished even and smooth without using extra cement & provided with construction joint on the interval not more than 3.0m and filled with bitumen and sand mortar in 1:3 complete all as specified & directed.

M&L for 25 mm thick PCC (1:2:4) type B-0 using 12.5 mm graged stone aggregate as in floors, etc complete all as specified and directed.

M&L non skid coloured ceramic joint free tiles 7 to 8 mm thick area of each tile exc 0.06 Sqm but not exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade over & including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed.

M&L glazed ceramic joint free coloured tiles on vertical surfaces size not less than 450mm x 300mm x 7mm thick over & including 10mm thick rendering in CM 1:4 and pointed in white/coloured cement to match the shade /colour of tiles complete all as specified & directed.

S&F Machine pressed precast cement concrete coloured chemically treated interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658 - 2006 of 60 mm thick, M-35 grade, laid over and including crushed quarry M-Sand cushioning not less than 40 mm thickness complete all as specied and directed.

M&L walling of random rubble stone masonry, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) including demolition of stone masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed.

Material and labour walling of random rubble stone masonry, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.

M&L for brickwork with subclass 'B' bricks (old size), straright or curved on plan exceeding 6m mean radius built in Cement Mortar 1:6 and complete all as specified and directed.

M&L for rendering 20 mm thick on fair faces of stone surface or surfaces other than fair face of brick work or one side of lathing in cement mortar (1:6), finished the surface fair and even complete all as specified & directed.

M&L for rendering 15mm thick on surfaces other than fair faces of brick work/stone or concrete surfaces in cement mortar (1:6),and in finished the surfaces even and smooth without using extra cement complete all as specified & directed.

M&L for suspended false ceilling comprising of non asbestos fibre cement bulding boards of size 595mmx595mm,6mm thick fixed or laid/inserted to powder coated GI frame work with screws over GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sourrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm center to centre including hangers 6mmm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified and directed.

S&F structural steel work as in tubular trusses ,purlin,rafters including special shaped washer complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc complete all as specified and directed.

S&F pre- coated galvalume aluminum zinc coating GI based profile pattern steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa (AZ150) as in roof covering/ clading to wall, including crimping sheet at end fixed with self tapping screws omplete all as specified & directed.

M&L MS "TMT" bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with chips complete all as specified and directed.

M & L for mild steel Angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire , etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling bolting or riveting, etc, and similar work and similar conforming to Fe-290 Gde E-165 complete all as specified and directed.

M & L for Mild steel Round bars 10mm dia and over, cut to length, bent to shape required, includinig cranking, bending spirally for hooping of columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips quality confirming to Fe-410 W complete all as specified and directed.

M & L for mild steel screw bolts (machine made) with hexagonal or sguare heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or screw nut n.exc 10 cm long dia of shank 12 mm complete all as specified and directed.

S&F chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. Note: Weight of chain link fencing will be ascertain by BOO.

M & L for Galvanised 2 strand steel barbed wire 2.24mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel wire, staples or steel pins etc complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coal of red oxide / zinc chrome primer on surfaces of any description, over 10cm width or girth, not otherwise described on newly steel surfaces including preparation of new steel surfaces complete all as specified and directed.

M & L for Preparation of newly steel and iron surfaces of any description n.exc 10cm in width or girth when connected with other painting, applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for applying two coats of white wash on new plastered wall surface including preparation of surfacec omplete all as specified & directed.

S&F GI tubing 50 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed.

M&L Welding in repair works thickness of metal to be welded Exc 20 mm but not exc 25 mm complete all as specified and directed.

S&F in repair vitreous china urinal half stall type flat back of size 375mmx395mmx590mm (minimum) white with grating and union for discharge pipe, waste pipe, urinal spreader PTMT incl PVC connection 15 mm bore and 600 mm long with 2 nos PTMT/Brass nuts complete all as specified and directed.

S&F in repairs stop valves/angle valve 15mm bore cast copper alloy chromium plated, fancy type, cast copper alloy screwed down, high pressure, with scrutch or butter fly handle screwed both ends for iron pipe or for unions,complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 550mmx400 mm (overall) and including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia incl waste pipe and with centrally fixed brass chroium plated 15 mm bore pillar tap fancy type including 32 mm sink coupling complete all as specified and directed.

S&F galvanised mild steel water tubing, 'medium grade', ISI marked,15 mm bore galvanised with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and directed.

S&F 75 mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.

S& F in repairs of 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement etc complete all as specified and directed.

M&L for one light point or fan point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing caping/ conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green .

S&F switch piano type flush, single pole, one way, 5 Amp 230 Volt complete all as specified and directed.

S&F ceiling rose, surface backlit, three terminal complete all as specified and directed.

S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed.

Mohan singh (BID ID -3159282)

maharaja construction and suppliers (BID ID -3151196)

siddhant construction (BID ID -3153868)

ARAZAENTERPRISES (BID ID -3153989)

M/s Vinod Kumar Korpal, Sagar (BID ID -3151460)

M/S GR construction compony (BID ID -3153086)

AGRASEN ENTERPRISES (BID ID -3153735)

d k suppliar (BID ID -3154994)

OM BUILDER (BID ID -3153515)