CPPP

Active

Works

Electrical Works

SITC of 19 street light and 01 Nos post top lantern at various locations inside Hall 3 and elsewhere in IIT Kanpur

Indian Institute of Technology Kanpur

IIT Kanpur | Kanpur Nagar, Uttar Pradesh

Amount: ₹1.7 LCloses: 29 Sept 20262d left

Timeline

Published19 Sept 2026
Closes29 Sept 2026
Bid Opening30 Sept 2026

Tender Value

₹1.7 L

EMD Value

₹3,358

Closing Date

29 Sept 2026, 3:30 pm2d left

Tender Inviting Organisation

Name

Executive Engineer

Address

IWD, IIT Kanpur

Work Description

SITC of 19 street light and 01 Nos post top lantern at various locations inside Hall 3 and elsewhere in IIT Kanpur

Tender Information

Tender ID

2026_IITK_926940_1

Reference Number

63/EE/Elect/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Percentage

Period of Work

60 days

Location

IIT Kanpur

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per tender

Documents Required

3 documents required · 3 mandatory

Fee/PreQual/Technical

RequiredNIT (.pdf)

RequiredContractdocument (.pdf)

Finance

RequiredFinancial bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹3,358

Important Dates

Last Activity

19 Sept 2026

Published

19 Sept 2026

Bid Opening

30 Sept 2026

Download Starts

19 Sept 2026

Download Ends

29 Sept 2026

Submission Starts

19 Sept 2026

Clarification Period

19 Sept 2026 - 25 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (19 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying & drawing following sizes of FRLS PVC insulated copper conductor single core cable in / on the existing surface / recessed, PVC / steel conduit as reqd.
1.1	3 x 1.5 Sq.mm..	10	Mtr.	103	₹1,030
2Supply,Installation,Testing and commissioning LED light fittings integrated (with lamps) including connection,nut bolts, washer and screw etc. after removing old complete and submitting the dismantle in store as required.
2.1	LED Post Top Lantern 40 watt (Make_Crompton Cat.No.LPTO-40-CDL-M)	1	Nos.	10,354	₹10,354
3LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt).: Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC,frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI>70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till lifeends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in allrespect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
3.1	25 watt	19	No.	1,575	₹29,925
4S & F MCB of following pole and rating 240/415 volts, 10kA, 'C' series in the existing MCB DB complete with connection, testing & commissioning etc as reqd.
4.1	Single Pole 6 amp to 32 amp	20	Nos.	282	₹5,640
5Supplying and making end termination with brass compression gland, aluminium lugs for following size of PVC insulated & PVC sheathed / XLPE aluminium cable of 1.1kV grade as reqd.
5.1	2 x 10 sq.mm.	40	Nos.	292	₹11,680

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.09 MB

Tendernotice_2.pdf

PDF • 1.34 MB

Work Item Documents

BOQ_974099.xls

BOQ • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying & drawing following sizes of FRLS PVC insulated copper conductor single core cable in / on the existing surface / recessed, PVC / steel conduit as reqd.
1.1	3 x 1.5 Sq.mm..	10	Mtr.	103	₹1,030
2Supply,Installation,Testing and commissioning LED light fittings integrated (with lamps) including connection,nut bolts, washer and screw etc. after removing old complete and submitting the dismantle in store as required.
2.1	LED Post Top Lantern 40 watt (Make_Crompton Cat.No.LPTO-40-CDL-M)	1	Nos.	10,354	₹10,354
3LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt).: Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC,frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI>70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till lifeends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in allrespect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
3.1	25 watt	19	No.	1,575	₹29,925
4S & F MCB of following pole and rating 240/415 volts, 10kA, 'C' series in the existing MCB DB complete with connection, testing & commissioning etc as reqd.
4.1	Single Pole 6 amp to 32 amp	20	Nos.	282	₹5,640
5Supplying and making end termination with brass compression gland, aluminium lugs for following size of PVC insulated & PVC sheathed / XLPE aluminium cable of 1.1kV grade as reqd.
5.1	2 x 10 sq.mm.	40	Nos.	292	₹11,680

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supplying & drawing following sizes of FRLS PVC insulated copper conductor single core cable in / on the existing surface / recessed, PVC / steel conduit as reqd.

1.1

3 x 1.5 Sq.mm..

Mtr.

103

₹1,030

2Supply,Installation,Testing and commissioning LED light fittings integrated (with lamps) including connection,nut bolts, washer and screw etc. after removing old complete and submitting the dismantle in store as required.

2.1

LED Post Top Lantern 40 watt (Make_Crompton Cat.No.LPTO-40-CDL-M)

Nos.

10,354

₹10,354

3LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt).: Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC,frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI>70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till lifeends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in allrespect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

3.1

25 watt

No.

1,575

₹29,925

4S & F MCB of following pole and rating 240/415 volts, 10kA, 'C' series in the existing MCB DB complete with connection, testing & commissioning etc as reqd.

4.1

Single Pole 6 amp to 32 amp

Nos.

282

₹5,640

5Supplying and making end termination with brass compression gland, aluminium lugs for following size of PVC insulated & PVC sheathed / XLPE aluminium cable of 1.1kV grade as reqd.

5.1

2 x 10 sq.mm.

Nos.

292

₹11,680