Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.4 LAccepted-AOC A 46 ARYA NAGAR ALWAR RAJ 301001 | ALWAR | RAJASTHAN | 301001 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹28.0 L+₹24,116.57 (0.87%)Rejected-Finance H NO 29 DEVILAL COLONY TCP 2 HISAR CANTT HARYANA | HISAR | HISAR | HARYANA | 125006 | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹29.3 L+₹1.6 L (5.72%)Rejected-Finance | L3 | Rejected-Finance BEING L3 | |
| 4 | L4₹30.3 L+₹2.6 L (9.40%)Rejected-Finance 60 MADHUVAN BANK COLONY ALWAR | L4 | Rejected-Finance BEING L4 | |
| 5 | L5₹30.9 L+₹3.2 L (11.4%)Rejected-Finance | L5 | Rejected-Finance BEING L5 |
Tender Value
₹32.9 L
EMD Value
₹65,900
Closing Date
23 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE HISAR
HQ CWE HISAR HISAR MIL STN HISAR
SPL REPAIRS TO BLDG NO P-105 HRDC UNDER THE AOR OF AGE B/R-I AT ITARANA UNDER GE ALWAR
2023_MES_630851_1
CWE/HSR/ALW-39 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
ALWAR MILITARY STATION
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE ALWAR
₹65,900
19 Feb 2024
2 Dec 2023
26 Jan 2024
2 Dec 2023
23 Jan 2024
9 Jan 2024
Amount
Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed by Engr-in-Charge.
Demolition of cement concrete (un-renforced) in ground floor and paving. exc. 15 cm thickness (below or above ground level.) & removal of rubbish material complete all as specified& directed by Engr-in-Charge.
Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq m each & removing to store.
Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame n. exc 1.5 sq. m each & removing to store.
Taking down shutter of any decription exc. 1 Sqm and n. Exc 2 Sqm each and refixing in same opening including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable scews etc. Note: Dismentling of old chowkat and S&F new chowkat shall be measured & paid for separately.
Taking down shutter of any decription exc. 1 Sqm and n. Exc 2 Sqm each.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish of the premises
Taking down cement plaster any description on brick or stone any description complete all as specified& directed by Engr-in-Charge.
Taking up or down 15mm steel tubing and connections, complete all as specified& directed by Engr-in-Charge.
Taking up or down 20mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge.
Dismantling/demolition water tanks of capacity exc 1000ltr but not exc 2000ltr and removing from site complete all as specified & directed by Engr-in-Charge.
Dismantling of 110mm bore PVC(SWR) drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.
M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.
M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.
M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.
S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed.
S&F 35mm thick IInd class hard wood factory made panelled door shutter(two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified& directed by Engr-in-Charge. Make Pioneer,Surbhi metal, A-1 Teak
S&F 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified& directed by Engr-in-Charge.Make Pioneer,Surbhi metal, A-1 Teak
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed tinned tacks or GI wire stampe or nails and screws complete all as specified and directed
S&F Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane3mm in thickness complete all as specified& directed by Engr-in-Charge.
M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified& directed by Engr-in-Charge.
S&F Butt hinges 100mm long medium weight, stainless steel complete all as specified& directed by Engr-in-Charge.
S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed by Engr-in-Charge.
S&F 150mm 'D' type Aluminium handles, type, anodised complete all as specified & directed by Engr-in-Charge.
S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and directed
S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed by Engr-in-Charge.
S&F steel ventilator with top hung shutter including hinges steel peg stay complete including taking down.
M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-
M&L for flat iron as in hold fast, hooks, cleats welded to angle iron door/window frames etc complete all as specified and directed
S&F Steel windows box type with side hung shutters including projecting type hinges with steel handle 150mm, and steel peg stay, complete with glazing bars, dovetailed or welded & factory made (XW2)M/F) double shutter, openable shutter with glazing bars and other openable shutter without glazing bars, fabricated with members of standard size as shown on drawings including frames complete all as specified. Note :- The quoted rates shall be deemed of lugs and FI required for fixing wire cloth, Sheet Glass, Grills, iron mongry and guard bars as shown on drg.
S&F powder coated anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.
S&F Powder coated anodized aluminium door shutters, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as handles 2 Nos in each door, hinges type B-21 100mm long (3 Nos), complete all as specified & as directed.
S&FPowder coated anodized aluminium window and ventilator shutters, sliding Type or Fixed Type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.
S&FPowder coated anodized aluminium window and ventilator shutters, side hung type or without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.
S&F for powder coated of any colour as approved anodised aluminium grill of approved pattern for windows/ ventilators/doors complete all as specified and directed.
Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed by Engineer-in-charge and all as specified.
M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate), 25mm thick, as in Sub base complete all as specified & directed by Engr-in-Charge.
M&L non skid ceramic tiles 7 to 8mm thick(square/rectangular) colored tiles area of each tiles exc 0.11 sqm but n.exc. 0.18 sqm in floor set and jointed in neat cement slurry and pointed in white or coloure cement and over 15mm thick screed bed in CM 1:6 complete all as specified & directed by Engr-in-Charge.
Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colouredmatch over 15mm thick screed bed in CM 1:6 complete all as specified & directed by Engr-In-Charge.
S&F in repairs powder coated mild steel drapery rod of 20 mm inner dia (in lengths as directed) of approved colour with & including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.
M&L Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding off edges as directed by engr-in-charge.
M&L Green Marble work (table rubbed and polished) for wall lining (veneering to wall) 25mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade.
M&L For False Ceiling Complete With Armgyp-FB ceiling Tiles of Size 595x595,9mm thick (as approved by GE) fixed with and including galvanised iron Powder coated inverted 'Tee" or "L" section (Concealed GI frame Work) Suspended From Ceiling with provision of Galvanised wire 4mm dia and wall tapping screws including butterfly clips,hold down clips for fixing the board to frame complete all as per manufacturer's instruction,complete all as directed and specified.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engr-in-Charge.
8 Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L 75 mm thick PCC(1:3:6) type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even complete all as specified& directed by Engr-in-Charge.
M&L Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified & directed by Engr-in-Charge.
M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types and over screed bed 20 mm thick CM 1:6 cement concrete complete
M&L Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) set in cement mortar 1:6 as in coping of brick masonry wall chajja including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified& directed by Engr-in-Charge.
M&L Rendring 10mm thick in CM 1:6 on brick work or concrete surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement all as specified.
M&L for rendering 15mm thick in CM 1:4 on brick or concrete wall surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) all as specified.
Supply only Integral waterproofing compound
M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.
M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified & directed by Engr-in-Charge.
M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified.
Material and labour preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified.
M & L for preparation of old treated surfaces of walls, plastered or unplastered and applying one coat of cement base paint of approved shade/tint. complete all as specified and as directed by Engr- in - Charge.
M & L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coats of white wash complete all as specified and as directed by Engr- in - Charge.
All as per description of serial item No. 62.00 here-in-above but on ceiling surfaces
M & L for preparation of old painted wooden surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed by Engr- in - Charge.
M & L for preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed by Engr- in - Charge.
S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified & directed by Engr-in-Charge.
S&F 20mm GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge.
S&F in repair PVC connection pipe, 15mm dia & 600mm long with adopter and washer at both end complete all as specified & directed by Engr-in-Charge.
S&F Rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed by Engr-in-Charge.
S&F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 15 mm dia complete all as specified & directed by Engr-in-Charge
S&F in repair fancy type bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed bore in dia 15mm complete all as specified & directed by Engr-in-Charge.
S&F in repair white vitreous china wash hand basin 'Flat back' of size 450x300mm fixed on and including new brackets CP waste coupling and PVC Waste pipe complete all as directed by the Engr-in-charge.
S&F white vitreous china under counter basin size 450x525x195 mm shape oval of jaquar/cera or equivalent incl 32mm dia CP waste coupling complete all as specified and directed by Engr-in-Charge.
S&F in repair stop valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified & directed by Engr-in-Charge.
S&F in repair Stop/angle valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified & directed by Engr-in-Charge.Make-Prayag/Cera/Hindware
S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed
S&F in repair 15mm bore swan neck cast copper alloy pillar tap weight not less than 400gms screwed for iron pipe or brass ferrule fixed complete all as specified and directed by Engr-in-Charge. Make:- Cera & Jaguar or equivalent
S&F PVC waste pipe of 32mm bore of suitable length for WHB/Urinal/sink complete all as specified and directed
S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed
S/F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rests connection to trap and to flushing pipe, etc.complete including making food to floor complete all as specified & directed by Engr-in-Charge.
S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC make Dolfine/Commander Champion, fixed in repairs, complete all as specified.
S&F in repairs Vitreous China urinals, bowl type (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F in repair 15mm dia CP pillar tap fancy type cast copper alloy, CP with capstan head, screwed down high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shank and fly nuts screwed for iron pipe and fixed complete all as directed by the Engr-in-charge.
S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges of Brass chromium plated complete all as directed by the Engr-in-charge.
S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed by Engr-in-Charge.
S&F PVC (SWR) bends any radius 110 mm bore complete all as specified & directed by Engr-in-Charge.
S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified & directed by Engr-in-Charge.
S&F PVC (SWR) vent cowl 110mm complete all as specified & directed by Engr-in-Charge.
S&F 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed by Engr-in-Charge.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed by Engr-in-Charge.
S&F PVC (SWR),110mm junction single, (Single T) equal or unequal complete all as specified & directed by Engr-in-Charge.
M&L 75 mm thick PCC(1:4:8) type D2 (using 40mm graded stone aggregate ) as in sub base complete all as specified& directed by Engr-in-Charge.
M&L for 25mm thick Sand cushioning under floors complete all as specified and directed
M&L 60mm thick machine pressed precast conctete interlocking rubberized paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 , M-35 Grade complete all as specified and as directed by Engr-in-Charge.
S&F in repair brass chromium plated shower rose 125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including removing the old pipes and making good the disturbed surface as per existing complete all as specified & directed.
Demolition Mud/PCC in roofs padding any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed by Engr-in-Charge.
M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified& directed by Engr-in-Charge.
M&L screed laid 15mm thick in CM 1:4 with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified& directed by Engr-in-Charge.
M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces over bituminious primer complete all as specified& directed by Engr-in-Charge.
M&L APP based plymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven reinforcement/mat (center core) with thermal insulation laid by toarch application method with overlaps 100mm on length side and 100mm on the width side as per manufacture,s instructions with fabric (wt not less than 150 gms/sqm) on primed surface complete all as specified.
Cutting holes in brick walls Exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar etc for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 TYpe B1 as required complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) all as specified & as directed.
Precast RCC (1:2:4) type B-1 in manhole/soack well/septic tanks slabs/covers etc including necessary form work complete set in cement mortar 1:6 complete.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc
S&F Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. to confirming to IS 116-1979 grade (medium grade all as specified and directed.
Taking down carefully copper/Aluminium point wiring for one light/fan/socket/power point and taking down of teak wood batten / PVC casing caping and making good disturbed surfaces of walls/ceilings /floors etc incl dismentling of fittings.
Material and labour for point wiring completer with 1.5 Sqm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade conforming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm dia (external) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxed etc fixed concealed/recessed in wall or ceiling etc including 1.5 mm FRLS PVC insulated unsheated copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakelite white / colored top sheet cover 3.0 mm thick for one light point controlled by one way switch.concealed provision to be made if it is not exist.
All as per item No. 110 here-in-before but for one fan point controlled by one switch and regulator
All as per item No 110 here-in-before but for one bell/buzzer point controlled by one bell push
All as per item No. 110 here-in-before but for one light point controlled two ,two way switch
All as per serial item No. 110 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.
All as per serial item No. 110 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.
All as per serial item No.110 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.
All as per serial item No.110 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4.00 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 4.00 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour for AC complete all as specified & directed.
S&F switch piano flush type single pole one way, 5/6 amp 250 Volts , Module type.
S&F switch piano fulsh type , single pole, two way 5 Amps 230 Volts, modular type
S&F switch piano flush type single pole one way, 15/16 amp 250 Volts , Module type.
S&F socket outlet for 2& 3 pin 6 amp flush type 240 Volts ,two Module type.
S&F socket outlet for 2 in 1, 3 pin 6 & 16 amp, 240 Volts , two Module type.
S&F modular bell push 5 Amps 240 Volt, One Modular type
S&F multi music type AC 230 volts single pole , modular type
S&F PVC white cover plate with frame 1 Module.
S&F PVC white cover plate with frame 2 Module.
S&F PVC white cover plate with frame 3 Module.
S&F PVC white cover plate with frame 4 Module.
S&F PVC white cover plate with frame 6 Module.
S&F PVC white cover plate with frame 8 Module.
S&F modular metal flush box 1 Module.
S&F modular metal flush box 2 Module.
S&F modular metal flush box 3 Module.
S&F modular metal flush box 4 Module.
S&F modular metal flush box 6 Module.
S&F modular metal flush box 8 Module.
Supply and fixing ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified.
Supply and fixing decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16W to 20W with LED tube of model E-LITE LED pride and connecting up, complete all as specified and directed.Make : Havells cat part No. LHEXBHP71N1W018 or equivalent of philips/Crompton Greaves/ bajaj/Wipro/GE
Supply and fixing LED 16 Watt ultra slim edge 2x2 feet lit panel in aluminium casing recess mounted square fixtures in white finish suitable for low ceiling height, 3 in 1 , 3K,4K,6K with & including LED prewired and connecting up dismantling of old unsv recessed mounted light. Havells cat part no. LHEBMDP7UZ1W018 Or equivalent make
Supply and fixing lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.
Supply and fixing Adore LED lamp of 9/10 watt including taking down old u/s CFL lamp complete all as specified & directed. Make :- Havells cat part No. LHLDERHEML8X010 or equivalent of Philips / Crompton Greaves / Wipro/Bajaj
Supply and fixing stepped type electronic fan regulator, modular type type and connecting up, ISI marked, 240 Volts.
Taking down & Refixing of ceiling fan complete of any sweep 240V, AC and connecting up with necessary wiring of 3 core flexble copper wire, complete all as specified and directed.
Supply and fixing sheet metal enclosures double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,8 way, 240 Volts, grouted in wall complete all as specified & directed.
S&F sheet metal enclosures double door type suitable for fixing MCB's, TPN 8 way, 415 Volts and including taking down old U/S DB ,TPN,4way
S & F MCB 63 Amp, triple pole & neutral, 415 Volt & including taking down old U/S MCB
S & F MCB SPN 63 Amp, Single pole & neutral,240 Volt
S & F MCB 6-32 Amp, single pole 240 Volt
Supply & fixing AC box single pole and neutral enclosure with a two pin and socket complete with one single pole MCB 240 volts, 32 Amps
S&F sub main wiring on and including passing through PVC conduit pipe 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 including taking down existing U/S sub main wiring. (Note: Two runs of cable with one run of earth wire and one run of PVC Conduit should measured as one length)
Supplying, laying, jointing, testing and commisioning of size 4 core 25 Sqmm LT under ground cable, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 1100 Volt grade, laid in trenches / ducts / encased in GI pipe / fixed to pole/wall complete all as specified and directed. Note :- Exacavation and earth work, GI pipe for laying of cable, sand cushioning, cable protection cover shall be measured and paid seprately under respective items of the BOQ'.
Boring of holes under road, payment hard standing by trench less technology using ultra sound technique and necessary machine including supply and fixing HPDE pipe of 80 mm bore suitable for 0.4 mpa working pressure all as specified and directed.
Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes, laying of cables, pipes etc not exc 10 Sqm on plan and getting out in soft/loose soil.
Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil.
Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified.
M/L for brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.
M&L for dry sand and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.
S&F LED type street-DRACO SERIES light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as directed. Make: C&S Cat Part no. LTESS20WLED or equvalent Crompton Greaves /Wipro
Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.30 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre,charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.
M/s Devendera construction
AARSINFRATECH
M/S JINDAL ENTERPRISES
M/S GAURI CONSTRUCTION
Hitesh Construction
GAR CONSTRUCTIONS
shiva construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .