REPAIR/MAINT OF SECURITY LIGHTS AND GARDEN LIGHTS, SOLAR LIGHTS AT DOMESTIC AREA AND REPAIR/ MAINTENANCE FLAME PROOF LIGHT FIXTURE, LIGHTENING PROTECTION, LIGHTNING CONDUCTOR AND EARTHING OF BUILDING AT MANKHURD UNDER GE(NW) MANKHURD

Amount

Notes : (i)The contractor should be in possession of valid electrical license to execute electrical works. (ii) Supervisor for execution of electrical works/ electrical component of works employed by the contractor shall possesses supervisor certificate of competency issued by concerned State Government/ Union Territory and the worker/ tradesmen for execution of electrical works/ electrical component of works shall hold necessary permit issued by concerned State Government/ Union Territory. Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking cable protection cover etc complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

M & L for sand cushioning by spreading in trenches fine crush sand by gently punning down manually as in cable protection etc complete all as specified and directed.

Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250mm x 150mm x 40mm laid in trenches etc complete all as specified and directed.

Laying only un-reinforced precast concrete cable cover class LV, type-I, flat size 250mm x 150mm x 40mm laid etc complete all as specified and directed. Note :- Serviceable cable cover obtained from Ser Item No 1.00 here-in-after shall be reused.

Dismentling of PCC foundation / pole coping from ground level etc complete all as specified and directed.

M & L for PCC 1:2:4, type B-1, (using 20mm graded stone aggregate) as in coping including necessary use & waste of form work complete all as specified and directed.

Supply and Laying or fixing or passing through pipe, XLPE insulated ISI marked, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 Sqmm 3 core including necessary connection and providing cable lugs as required including disconnection/taking down of existing cable etc complete all as specified and directed.

-Ditto- all as per item No 9.00 above here-in-before but 10 Sqmm 3 Core -do-

M&L for reinforced cement concrete (1:2:4) type B1 nominal mix (using 20mm graded stone aggregate) for foundations, including rafts, footings, foundation beams, plinth beams, bases for column etc and mass concrete, complete all as specified and directed. Note - Reinforcement and form work will be measured and paid separately.

M & L for TMT bars of Fe-500 D grade conforming to IS: 1786, 10 mm dia & over, including cutting to length, bent to shape required, cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc, complete all as specified and directed.

M & L for TMT bars of Fe-500 D grade conforming to IS: 1786, 8mm dia bars as in binders, spacers, strippus including cutting to length, bent to shape required, cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc, complete all as specified and directed.

M & L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams , side and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, for rough finished surfaces of concrete, complete all as specified and directed.

Dismantling of old UNSV/rusted steel tubular poles 9 mtr long necessary disconnecting cables/over head condcutor and removing unserviceable pole from site complete all as specified and directed.

Supply, Fixing and connection of hot dip galvanised octagonal poles of height 6 mtr with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet along with base plate of size 200 x 200 x 12mm thick including 4 nos of M20 x 600 long J type foundation bolts and 1 mtr long hot dip galvanised single arm standard bracket, including MCB of 6 Amps, with connector 4 way to be provided as termination point complete all as specified and directed. Make : Bajaj/Crompton/Havells/Philips

M& L for preparing surfaces of steel tubular swaged pole LT with scraping out old paint by emmery paper, caustic soda complete and painting with two coats of aluminium paint and numbering of poles with white paint on black paint background and stripping with black and yellow synthetic enamel paint (100 mm each stripe) 3 Nos at equal distance from bottom (above PCC coping) upto a height of 1200 mm etc complete all as specified and directed.

M&L for preparation of old painted surfaces of pre-stressed concrete pole upto 11/9 mtr long by scarping old paint and applying two coats of cement base paint including numbering of pole with black synthetic enamel paint, painting the base of the pole in alternate black and yellow stripes each 30 Cm apart up to 1.5mtr height etc complete all as specified and directed.

Supply and fix in repair of Cable junction box IP 66/69 "weather proof" (with knockouts for cable entry) box of size 155 x 210 x 92 mm with connector/terminal, Din Rail, GI clamps made out of GI flat of size 25 mm X 3 mm channel including providing detachable GI 3 mm thick plate inside looping box as cable gland plate and including cable glands as required at size and making connections all as specified and directed. Make - Hensel cat part No KF1616B /National/Sintax

Supply and fix in repair of Cable junction box IP 66/69 "weather proof" (with knockouts for cable entry) box of size 130 x 180 x 77 mm with connector/terminal, Din Rail, GI clamps made out of GI flat of size 25 mm X 3 mm channel including providing detachable GI 3 mm thick plate inside looping box as cable gland plate and including cable glands as required at size and making connections all as specified and directed. Make - Hensel cat part No KF1010B /National/Sintax

M&L for cutting existing road/hard standing not exc 30x60 cm in wide & depth getting out excavated material for laying GI pipe including returning filling & well rammaing watering finish surface and provision of 10 cm concrete using PCC 1:3:6 type C2 from top, including removal of surplus soil etc complete all as specified and directed.

S& F in replacement of GI steel tubing medium grade 40 mm dia for laying in ground, along the pole in coping, road crossing etc for cable protection including necessary fittings , clamps for supports, etc complete all as specified and directed.

M&L for taking down old unsv and supply & lay 3 Core 1.5 Sq mm size multistranded FRLS copper conductor PVC unsheathed 650 / 1100 Volt Grade As per IS 694 with and including 20 mm dia PVC conduit and passing through PVC conduit with necessary saddle, clamps, bolts & nuts, all for interconnection of cable looping box to Street Light Fitting, Post Top Lantern etc complete all as specified and directed.

Dismantling and taking down the existing defective street light fitting/Garden lights/Building security light of any type and any capacity from steel tubular pole, opening the street light fitting, checking the serviceability of spare parts including replacement of defective parts such as electric drivers and remove the carbon after repairing including refixing on pole including connecting & testing etc complete all as specified and directed. Note:- Electronic drivers and LED will be measured and paid separately on respective item of Sch 'A' here-in-after.

Supply and fix in replacement flood light fittings in buildings etc the fitting shall be of LED type 150 Watts complete with and including drivers, pressure die cast aluminium housing, prewired etc complete all as specified and directed. Make : Crompton Cat part No: LFLN-150-CDL/60/Philips/Bajaj/Havells/Crompton

S&F in repair of building Security light fitting made up of pressure die cast alluminium body with mid power 60 Watt LED (PINNACLE PLUS) as lighting sources and PC cover having Top opening seperate driver compartment with IP66 protection Including fixing arrangements and taking down old rusted bracket fittings etc complete all as specified and directed. Make : Cat No. LST-60-CDL-M of Crompton / Havells /Bajaj/Philips

Supply & Fix 8 watts LED Bollard Garden light fittings with efficient high output LED, Pressure die cast powder coated housing with PC diffuser , driver nuts, bolt, washers, base plate, foundation 0.3 Meter x 0.3 Meter x 0.3 Meter by PCC 1:2:4 type B-1 using 20 mm graded stone aggregates of size including excavation and earthwork, provision of GI bend of size 50 mm dia in the PCC for cable entry etc complete all as specified and directed. The Fitting Shall Conform to Cat No - CONEBL8WLED857SSYMTOPC of Havells / Bajaj/Crompton/Philips

S & F decorative 35 Watts LED Post Top Lantern, 230 Volts, including drivers, pressure di cast aluminium housing, prewired etc complete all as specified and directed. The fitting shalll conform to cat No - CORALPT35WLED757PSYMTOPC of Havells /Bajaj/Crompton/Philips

S & F decorative 20 Watts LED Post Top Lantern, 230 Volts, including drivers, pressure di cast aluminium housing, prewired etc complete all as specified and directed. The fitting shalll conform to cat No - RUBYT25WLED757PSYMTOPC of Havells / Crompton Cat No : LPTH-20-CDL

S & F in repair/replacement of LED Driver 60 to 70 Watts Suitable for street light fitting etc complete all as specified and directed.. Make: Crompton /Havells/Bajaj/Philips

S & F in repair/replacement of LED Driver 30 to 40 Watts Suitable for street light fittingetc complete all as specified and directed. Make : Crompton /Havells /Bajaj/Philips

M&L for straight through joint (HEAT SHRINKABLE TYPE KITS) for underground cable including joint kits and labour complete for making joints suitable for LT, XLPE/PILCA/PVC sheathed armoured heavy duty cable with aluminium conductor 3.5/4 core 25 to 50 Sqmm complete with testing till satisfaction of Engr-in-Charge etc complete all as specified and directed.

S & F in repair analog time switch FM/1 Quartz, supply voltage 240 Volts 50 Hz, Type- QT(DAILY) etc complete all as specified and directed. Make L&T or make specified in PS

S & F in repair 3 pole power contactor MNX-18 of coil voltage 415 Volts etc complete all as specified and directed.

S & F in repair spare coil for MNX-18 3 pole power contactor of 415 volts etc complete all as specified and directed.

M&L for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I, 2009 specification including taking down old earthing materials etc complete all as specified and directed.

M & L for depute service representative to attend the LED Solar Light fittings of 18 wattage once in a month . Service Representative will Carry scheduled preventative maintenance checks as per details given below at Mankhurd for 26 fittings per month (a)Solar PV Modules - Check the Circuit Voltage and current characteristics. Also, check the mechanical integrity of the Solar PV Modules. (b)Battery Bank -Check the Specific Gravity of the Electrolyte, Electrolyte level, battery terminals, Battery Bank box and adding Electrolyte solution if required. Note:- Electrolyte solution will be measured seprately under this Schedule. (c)Solar PCU - Check DC input Voltage and Current, Check AC input Voltage and Current, checking the wiring. (d)Module Mounting Structures -Check the mechanical integrity of the Solar PV Modules Mounting Structures. Ensure that there is no corrosion set up on the MMS and the module is firmly fixed. (e) System Wiring - Check the system wiring including the insulations, cable lugs and rewiring/soldering if any required (f)Module Cleanliness - Cleaning of the dust accumulated over the Solar Module, and taking corrective measures

M&L for preparation of old painted surfaces of Solar Street Light Poles including acessories by scarping old paint and applying two coats of synthetic enamel paint paint including numbering of pole with black synthetic enamel paint etc complete all as specified and directed.

Supply and fix in replacement of LED 18 watt DC solar light fitting etc complete all as specified and directed. Make - Emvee / ICPC Solar

Supply and fix in replacement of low maintenance VRLA lead acidic battery of 120 AH suitable for 1 x 18 watt Soalr Light fitting all as per recommanded by Manufracturer

Supply and fix in replacement of charge controller suitable for 18 watt Solar Light fittings incluing any wiring as required etc complete all as specified and directed.

Supply only electrolyte solution to be incorporated in servicing, suitable for Solar charged battery of any capacity etc complete all as specified and directed.

Supply and Laying or fixing or passing through pipe, XLPE insulated, ISI marked armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 50 Sqmm 3.5 core in trenches, along the wall including necessary connection and providing cable lugs as required including disconnection/taking down of existing unsvcable etc complete all as specified and directed.

-Ditto- all as per item No 43.00 above here-in-before but 35 Sqmm 3.5 Core -do-

M&L for earthing complete with Copper earth plate electrode 600x 600x 3 mm buried directly in ground with top edge of the plate not less than 1.5 mtrs below normal ground level and connected to earth test point by means of copper Strip of size 20x3 mm all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 including earthwork, PCC chamber, CI cover, protection and watering pipe, funnel, mesh etc all as required at site and all as directed and including taking down of old earthing materials etc complete all as specified and directed.

M & L for Taking down of aluminium/copper strip of any size laid as roof conductor, down conductor, earth contunity conductoor including air termination rod from any position / location of sheds/ buildings of height up to 30 meter & refixing the same after straightning the conductor/removal of bends, including replacing the old insulators with new one and saddles etc complete all as specified and directed. Note -i) The quoted rate is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 30 meter. ii) The rate is deemed to be inclusive for providing Procealin insulator, screws, Plugs iii) PCC Block required shall be measure and paid under respective items

S&F aluminium earth strip as roof/down/earth contunity conductors of size 25x3mm with saddles, insulators, screws, etc to / at any position / location of sheds/ buildings of height up to 30 meter complete all as specified and directed. Note -i) The quoted rate is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 30 meter. ii) The rate is deemed to be inclusive of Procealin insulator, screws, Plugs

S&F air termination, single pointed aluminium rod, 12mm dia 300mm long at any position / location including all necessary terminal base plate, scaffolding / staging required, etc. complete all as specified and directed

M&L Test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm, drilled and screwed including 3 nos. 8mm dia 25 mm long hex. Head screw in replacement of the unserviceable. Including MS box made out of 3 mm thick sheet for fixing the block etc complete all as specified and directed.

M&L for pre-cast cement concreate block of size 0.15M x0.15M x0.15M for fixing of Aluminium strip type C1 1:3:6 using 20mm graded stone aggregate in cement motor 1:4, including fixing the concrete block on terrace of bldgs of height up to 30 meter etc complete all as specified and directed. Note -i) The quoted rate is deemed to be inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 30 meter.

S&F GI 32x6mm earth continuity strip fixed to walls on batten or recess or chases or buried in ground or drawn in pipe, etc. as fixed / laid in repairs complete all as specified and directed

S&F copper 20x3 mm earth continuity strip fixed to walls on batten or recess or chases or buried in ground or drawn in conuit / pipe or fixed to poles or any other indicated situation for earthing, etc. as fixed / laid in repairs complete all as specified and directed.

Taking down old unserviceable High bay, Mid Bay, Flame Proof light fittings from walls/Builings/Sheds/ Ceiling height up to 10 Meter for repairs and replacement of burnt/worn out accessories and refixing the same in existing position including testing of fittings after repair, testing of connected wiring complete all as directed Note :- (a) T & P, Ladder for any height etc are deemed to be included in the quoted rate. (iii) The representative of the contrcator shall report to Engineer-in-charge/JE and carry out repairs on daily basis during the contrcat period and the defect shall be rectified on the same day (iii) A penal recovery of Rs 500 Per Day Per Complaint for not attening the compalint will be recovered

Supply and Fix CIMFR certified LED flame proof tube light fitting 1 X 20 Watts, with driver & LED tube rod, IP 65 protection, including connecting up with three core flexible multi strand copper conductor of size 1.5 Sqmm with flexible metal conduit, including fabrication and fixing of red oxide zinc chrome coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below permenent ceiling, including anchor fastners, nut bolts, hooks, chain etc complete all as specified and directed. Make : Crompton cat no -EXTN1LT8-16/20 /Bajaj/ Sudhir/Philips/Crompton/Baliga/Flexpro/Shyam Switch Gear Note : (a) Fittings shall will be installed in Hangers/Sheds, hight up to 6 Meters only and directed by Engr-in-Charge. (b) T & P, Ladder for any height etc are deemed to be included in the quoted rate.

Supply and Fix CIMFR certified LED flame proof tube light fitting 2 X 20 Watts, with driver & LED tube rod, IP 65 protection, including connecting up with three core flexible multi strand copper conductor of 1.5 Sqmm, with flexible metal conduit, including including fabricating red oxide zinc chrome coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below permenent ceiling, including anchor fastners, nut, bolts, hooks, chain etc complete all as specified and directed. The Fitting Shall Conform to cat no -EXTN2LT8-16/20 of Crompton or equivalent from bajaj/ Philips/Sudhir/ Baliga/ Flexpro/ Shyam Switch Gear Note : (a) Fittings shall will be installed in Hangers/Sheds, hight up to 6 Meters only and directed by Engr-in-Charge. (b) T & P, Ladder for any height etc are deemed to be included in the quoted rate.

Supply and Fix CIMFR certified LED flame proof well glass light fitting 60 watts , with driver & LED, IP 65 protection, including connecting up with three core flexible multi strand copper conductor of 1.5 Sqmm, with flexible metal conduit, including including fabricating red oxide coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below permenent ceiling, including anchor fastners, nut, bolts, hooks, chain etc complete all as specified and directed. The Fitting Shall Conform to Cat no -FWL1315-60-CDL of Crompton or equivalent from bajaj, Philips, Sudhir/Baliga/Flexpro/Shyam Switch Gear Note : (a) Fittings shall will be installed in Hangers/Sheds, hight up to 6 Meters only and directed by Engr-in-Charge. (b) T & P, Ladder for any height etc are deemed to be included in the quoted rate.

S&F flame proof WP rotory switch with cable termination box in LMS etc complete all as specified and directed. Make : Sudhir /Baliga/Crompton greeves

S& F flame proof WP rotory switch socket & plug combination in LM 6 of capacity 16 AMPs single phase and nuetral with earth etc complete all as specified and directed. Make : Sudhir /Baliga/Crompton greaves/Flexpro/Shyam Switch Gear

S&Fix in replacement wall mounted outdoor type double door LT Panel made out of 3 mm thick CRCA Sheet, the panel shall be provided with flame proof MCB DB made out of Cast aluminium alloy LM6, inside and out side light gray epoxy powder coating shade, with 1 No cable entry for incoming cable and three Nos cable entry for out going circuits with and including cable gland and stopping plug, 1 No MCB SPN 32 Amp as incoming and 3 Nos MCB SP6 Amps for out going connections IP 65 protection as per IS 2147/1962. The panel shall be powder coated, front openable and lockable with key and shall be fabricated from CPRI approved sample manufacturer of enlisted manufacturer. Note - The contractor shall submit the Layout Drawing of Panel and got approved by GE before the panel fabrication

M&L for sub main wiring with two single core 1.5 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade drawn in through existing stove enamelled steel conduit with and including PVC insulated 1.5 Sqmm single core multi strand copper conductor as continous earth wire in green colour connected to common earth dolly, DB, Fittings all as specified in wall, ceiling, steel frames of buildings, including necessary flexible steel conduit and replacing of old damaged saddles & spacers, junction boxes of conduit etc complete all as specified and directed. Note : 1. Two runs of cable, one run of earth wire will be measured and paid one unit. 2. wiring in shed with T & P, Ladder for any height etc are deemed to be included in the quoted rate.

M&L for sub main wiring with two single core 2.5 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade drawn in through existing stove enamelled steel conduit with and including PVC insulated 2.5 Sqmm single core multi strand copper conductor as continous earth wire in green colour connected to common earth dolly, DB, Fittings all as specified in wall, ceiling, steel frames of buildings, including necessary flexible steel conduit and replacing of old damaged saddles & spacers, junction boxes of conduit etc complete all as specified and directed. Note : 1. Two runs of cable, one run of earth wire will be measured and paid one unit. 2. Wiring in shed with T & P, Ladder for any height etc are deemed to be included in the quoted rate.

M&L for sub main wiring with two single core 2.5 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade drawn in and including stove enamelled steel conduit laid over the surface of wall/ceiling and PVC insulated 2.5 Sqmm single core multi strand copper conductor as continous earth wire in green colour and connected to DB, equipments, connector, common earth dolly all as specified in wall, ceiling, steel structures of builings with necessary flexible steel conduit and saddles & spacers etc complete all as specified and directed. Note : 1. Two runs of cable, one run of earth wire, one run of steel conduit will be measured and paid one unit. (2) Wiring in shed with T & P, Ladder for any height etc are deemed to be included in the quoted rate. Note : A sum of Rs 75,575.00 towards sch of credit shall be deducated to arrive the contract sum.

Chaudhary Enterprises

sapana enterprises

M/s R J TRADING CO

Radha Engineering Services

bajaranga enterprises