Karnataka

AOC

Works

Bridge cum Barrages

Construction of Barrage near Yallammawadi across Halla near the lands of community farmers (Schedule Tribes) of Koktnur village, Construction of Bridge cum Barrage across Halla near Pujari tota of community farmers (Schedule Tribes) joining Kamatagi school road of Kokatnur-Yallammawadi village & Construction of Checkdam across Halla near community lands of farmes (Schedule Tribes) of Adahali village in Athani taluka, Dist-Belagavi (TSP/2025-26)

Minor Irrigation Department

Minor Irrigation Division Belgaum | Karnataka

Amount: ₹4.8 CrCloses: 30 Dec 2025Closed

Timeline

Published23 Dec 2025
Closed30 Dec 2025
Awarded—

Bids

1 Bid30 Dec 2025

#	Company	Amount	Status
1	G BHANUKUMAR ₹5.0 Craccepted-aoc	₹5.0 Cr	accepted-aoc

Tender Value

₹4.8 Cr

EMD Value

₹7.2 L

Closing Date

30 Dec 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

Mahadev B

Mobile Number

Work Description

Construction of Barrage near Yallammawadi across Halla near the lands of community farmers (Schedule Tribes) of Koktnur village, Construction of Bridge cum Barrage across Halla near Pujari tota of community farmers (Schedule Tribes) joining Kamatagi school road of Kokatnur-Yallammawadi village & Construction of Checkdam across Halla near community lands of farmes (Schedule Tribes) of Adahali village in Athani taluka, Dist-Belagavi (TSP/2025-26)

Tender Information

Tender ID

MI/2025-26/BB/WORK_INDENT9223

Reference Number

MI/2025-26/BB/WORK_INDENT9223

Tender Type

Open

Product Category

Bridge cum Barrages

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Belgaum

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with Profit & Loss Account statement as per KW-4 Qualification of The Tenderer

RequiredCompany /Contractor Registration Certificate

RequiredWork done certificate as per KW-4 Qualification of The Tenderer

RequiredWork done certificate showing quantities of different items executed

RequiredMachinery-Purchase Invoice / second sale agreement as per KW-4

RequiredBank credit certificate as per KW-4 Qualification of The Tenderer

RequiredWork in Hand as per KW-4 Qualification of The Tenderer

RequiredGST registration Certificate

RequiredPAN & TAN Certificate

RequiredScanned signature of the bidder/representative to be attached while uploading the bid document

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The Bidder shall ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPPP on or before the last date of bid submission.

The tenderer is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidder s end

EMD payments through e-payment mode shall be made as one single transaction and payments made in the part are liable for rejection.

The Tender are invited as per Standard Tender bid document KW-4

Conditional Tenders will not be considered

All relevant documents as per the KW-1 need to be uploaded while submitting bid in general documents provision in KPPP portal.

The Employer reserves the right to accept or reject any of the tender without assigning any reason.

The contractor has make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to the relevant IS Specifications or Equivalent and obtain necessary quality certificate from authorized quality control.

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing

All the documents required as per technical qualification criteria needed to be uploaded in Original or Attested by any official not below the rank of Executive Engineer or Notary

The Contractors should submit all the Documents as uploaded in Original or duly attested by a Notary/an officer not below the rank of an Executive Engineer on or before opening of Technical Bid as Notified.

Name, address, and telephone, telex, and fax numbers of the contractor is to be provided

The contractor has to furnish Additional security deposit for unbalance tender as per clause 29.1 of ITT, to an amount equal to difference in contract price and amount put to tender, in addition to 5% performance guarantee (in any of the form prescribed) while concluding the Agreement.

Unique Document Identification Number (UDIN) from Practicing Chartered Accountant is preferred in Annual Turn over

The intending bidders are advised to visit the site of work and make themselves familiar with the local situation regarding the availability of the construction materials, workmen, land required for construction activities etc.

The tenderer shall also disclose if there are any bankruptcy proceedings against him.

The Contractor shall provide work program as per Clause 25 under the chapter Time control of conditions of contract. The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work.

During the execution of the works, if any minor minerals are required, contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994 (as amended up to date). As per the prevailing rules for any use of minor minerals the contractor has to submit the Mineral Dispatch Permit obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 ( as amended from time to time) will be deducted from the contractors bill at the time of payment

The Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued/ counter signed by Superintending Engineer (if work is done in other states).

A copy of GST registration certificate should be uploaded

The contractor shall quote the rates without adding GST for either materials or works contract (Service). GST payable by the contractor under this works contract will be paid to the contractor separately over and above the contractor s bid amount. The increase if any in the GST shall not be paid in the extended period of Contract for which the Contractor alone is responsible for delay as determined by the Authority.

Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18 Percent of Amount put to Tender) amount is kept in form of Overhead sum in sanctioned estimate. According to guidelines in Common SR Amount put to tender and ECV amount are including GST. KPPP Portal format has No Options to add GST separately. The item wise rates do not include GST. Hence, GST will be paid separately for the quoted amount accordingly. Declaration Certificate must be attached mandatorily

If the GST rates are revised during the contract period, payment will be made/withdrawn accordingly

For Works estimate cost more than Rs. 100.00 Lakhs : For Quality control tests of materials the contractor should provide required Rammer with Core Cutter, Balance and Moisture Meter, size 15x15x15 cms Mould Sets and for testing of sand and metal set of required mesh etc.

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Satisfactorily completed (at least 90% of the Contract value), in last five years (i,e. 2020-21 to 2024-25) as prime contractor, at least one similar work such as Construction of Barrage Cum Bridge/Barrage/Checkdam to an extent of 50% of the cost of the work Rs.241.50 Lakhs. Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued / counter signed by Superintending Engineer (if the work is done in other states)

Work Done Certificate

Executed in any one year, the following minimum quantities of work- Excavation and Embankment (combined quantities)-12800.00 Cum, Cement concrete (Including RCC & PSC)-4300.00 Cum, Providing Steel Reinforcement fabrication-59.30 Tonnes, Providing & fixing MS Gates & Channels-20000.00 Kgs, Providing & Constructing 450 mm thick stone revetment-560.00 Sqm

Others -- Work done certificate showing quantities of different items executed

Capabilities of Vendor

Each Tenderer should further demonstrate-(a) Availability by owning at least 50% of the required/specified key and critical equipment for this work and (b) the remaining 50% can be deployed on lease/hire basis for all works provided the relevant documents (commitment agreements etc.,) for availability for this work are furnished. Excavator-2 Nos, Lorry/Tipper/Tractor -3 Nos, Rollar (Static) DPR / VRR-1 Nos, Concrete Mixer with Hopper or Ajax-3 Nos

Others -- Purchase Invoice / second sale agreement

Should have been registered as Class-I Contractor in PWD

Others -- Class-I PWD Registration Certificate

A Copy of GST Registration Certificate

GST Registration

Income Tax :Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos.

Others -- PAN & TAN Certificate

Scanned signature of the bidder/representative to be attached while uploading the bid document

Others -- Scanned signature of the bidder/representative to be attached while uploading the bid document

Financial Status

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (2020-21, 2021-22, 2022-23, 2023-24, 2024-25) (a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.965.00 Lakhs. Financial turnover of previous years will be given a weightage of 10% per year to bring them to price level of FY 2025-26

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs.162.00 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.

Line of Credit

Assessed available tender capacity -(AxNx1.5-B) where A-Maximum value of civil engineering works executed in any one year during the last five years (2020-21 to 2024-25) (updated to 2025-26 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited. B-Value, at 2025-26 price level of existing commitments and on-going works to be completed during the next 9/12 years (period of completion of the works for which Tenders are invited) Note-The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- Work in Hand

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹7.2 L

Important Dates

Last Activity

30 Dec 2025

Published

23 Dec 2025

Bid Opening

31 Dec 2025

Download Ends

29 Dec 2025

Pre-Bid Meeting

29 Dec 2025

BOQ Preview

•

Components of Kokatnur Barrage

•

Earth work excavation for Foundation by mechanical means for all works as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dr...

•

Preparing foundation bed for masonry or concrete in rock portion by removing all loose material by wedging / chiselling and disposing off the same as directed and cleaning the surface with air and wat...

•

Providing and fixing 25 mm dia 3 m long cold twisted defomed steel dowel bars with one end driven into 38 mm dia 1.50 m deep hole drilled in bed rock and other end provided with L- bend for embedding ...

•

Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction ) including cost of all materials, machinery, labour, all other...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and fixing M.S. Channel frame to suite the suitable size of gates. The side channels with suitable height with hold fasts 12mm dia and 0.5m long M.S. Bar at 0.50 m c/c with suitable size bot...

•

Providing, Supplying and fixing M.S. gates of suitable size with required number of M.S. plate with and stiffeners (2 Nos) horizontal bracing 6 Nos. of ISMC 75*40 including providing rubber guard of I...

•

Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including plugging the joints with selected earth, cost of all labo...

•

Filling clayey soil between two rows of sand bags placed for forming ring bund including tamping, plugging leakage points etc., complete with all leads & lifts, as per detailed specifications, drawing...

•

Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 4...

•

Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate i...

•

Providing and fixing 20 mm thick 150 mm depth tarfelt expansion joint filler board for cement concrete lining of canal including cost of all materials, labour etc., complete with all leads & lifts, as...

•

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,...

•

Wet Mix Macadam (Plant Mix Method): Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical...

•

Providing and fixing board displaying information, such as name of work, Tender cost, Name of contractor , work completion and liability period etc , having rectangular shape of 1.20m x 0.90m size mad...

•

Components of Kamatagi BCB

•

Components of Check Dam

•

Providing and laying insitu vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for well steining including cost of all materials, machinery, labour, cleaning...

•

Components of Injection well

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

•

Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates with placing and sinking plums of size 150 to 80 mm upto 15 percent for gravi...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Royalty.pdf

Others - royalty • 0.19 MB

star rates.pdf

Others - star rate • 1.28 MB

detail specification.zip

Others - Specification • 29.02 MB

Drawing-s.zip

Others - Drawing • 5.96 MB

Bar Chart9223.xls

Others - bar chart • 0.80 MB

banker certificate.doc

Others - Line of credit • 0.03 MB

standard bid document kw- BCB.doc

Tender Document • 3.18 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

G BHANUKUMAR

₹5.0 Craccepted-aoc