Repair to leakage/seepage, water proofing treatment of roof, roofing sheets, false ceiling connected E/M item at OTM accn, Messes and IB, MES accn at Kanjoli line Bharatpur

Amount

Cutting or uprooting grass incl removing old mud phuska of any thickness, removing filled soil below mud phuska, removing rubbish off the premises upto 100m, cleaning surface and preparing to receive new treatment complete all as specified and as directed.

Removing building materials etc. to a distance exc. 100 m and n exc. 3.0 Km beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed.

M&L for screed bed or bedding layer of cement mortar 1:4, 20 mm thick finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing surfaces for roof treatment by removing all loose gravel, dirt, oil, grease and foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application, repair all cracks by cutting "V" groove and fill with PMC mortar (Polymer modified cement mortar) prepared by cleaning free from dust and loose particles and apply on dry surface first coat of crack fillar using putty knife or trowel allow to dry for 4 to 6 hr, afterthat apply second coat and dry for 4-6 hrs in ratio as per manufacturers specification, provide 75 mm x 75 mm coping made out of PMC mortar as above on all joints of vertical upstands to ensure that moisture content in the prepared surface does not exceed 5% immediately before application of liquid membrane. Material incorporation & Protection be provided as Terrasheild first apply with water (ratio terrasheild : water will be 4:1) as primer with coverage area 0.1 Kg per Sqm. After 2-3 hour later, second step apply directly first coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm with roller.Spread non woven geo textile of 40 / 50 gsm with overlap of 50 mm in both direction when the surface is still tacky. After 4-6 hour later, apply third step apply directly second coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm with roller. final thickness of complete treatment should be minimum 1.0 mm. Water tank and Khurra location one additional coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm be provided. after complete application full curing minimum 7 days be carried out . Above complete application will be done by authorized apllicator from Manufacturer and as per manufacturer's specification. Make: IWL Co./ STP/ Piddilite .

M&L for 40mm thick PCC type B-0,( 1:2:4) using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacturers specification complete all as specified and as directed.

Dismantling wall/ceiling with frame work of any description and arrangement with supporting members complete all as specified and as directed.

S&F for anodised aluminium snap grid frame work of grid size 605 x 605 mm false ceiling, complete all as specified and as directed.

S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.

S&F for gypsum board not less than 6-7 mm thick of size (595x595mm) both side PVC coated with one side decorated pattern, complete all as specified and as directed.

S&F for 4 mm thick non-asbestos fibre cement building boards fixed to aluminium framework, complete all as specified and as directed. Note: Frame work for ceiling shall be measured and paid separately)

S&F for PVC wall panelling in repair with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angle fixed with solvent cement complete all as specified as per manufacturer's instructions and as directed by engr in charge..

Dismantling boarding of any description, fixed in any position with nails, complete all as specified and as directed.

M&L for 18 mm thick PVC boarding shutters of density exc 550 Kg per Cum but nexc 600 Kg per Cum one side decorative lamination & other sidebalancing white lamination sheet fixed with brackets, screws etc, Panels shall be fabricated using adhesive and screws wherever required all the edges shall be coverd with 18 mm x 1 mm thick edge bending tape or 90 degree edge bend finish as per manufactrure specification of approved pattern complete all as specified and as directed.

M&L for 18 mm thick PVC boarding shelves of density exc 550 Kg per Cum but nexc 600 Kg per Cum one side decorative lamination & other sidebalancing lamination sheet fixed with brackets, screws etc, Panels shall be fabricated using adhesive and screws wherever required, Supported for three sides with 18 mm x 18 mm PVC Ply fixed with Screw all the edges shall be coverd with 18 mm x 1 mm thick edge bending tape or 90 degree edge bend finish as per manufactrure specification or approved pattern complete all as specified and as directed.

S&F for stainless steel 125 mm handle not less than 12 mm dia suitable for cupboard shutters with self tapping stanless steel screw complete all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 40 mm complete all as specified and as directed.

S&F Magnet catch for shutters as per approved sample complete all as specified and directed.

S&F soft closing hinges 'O' Dgree high grade mild steel, bright finish or electrogalvanised as per approved sample for shutters complete all as specified and directed.

S&F 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets or welded and fixed to steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning upmitred angles etc as required complete all as specified and as directed.

Dismantling/demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed.

M & L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6.0 metre mean radius as wall built in cement & sand mortar 1:6, complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling & mass concrete, complete all as specified and as directed.

Taking down cement or cement lime plaster of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

M&L for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of concrete surfaces as in ceiling including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces including finishing the surface even and smooth, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper white or tinted (copolymer based resin glue to be added for longer durability and better finish) over one coat of water based white pigmented alkali resistant priming paint, over 1 mm thick wall care putty on Wall Surface including all necessary arrangement for execution of work ,complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.

M&L for preparation of new plastered or un plastered surfaces of wall including cornices, pilasters etc and applying two coat of cement based paint of approved colour/camouflaging pattern on wall Surface including all necessary arrangement for execution of work, complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed.

Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in sub base, laid and finishing the surface of concrete topping even and rough to receving of screed for tiling, complete all as specified and as directed.

M&L for vitrified ceramic tiles, 10 mm thick (square/rectangular) polished, area of each tiles not exc. 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for non - skid Ceramic tiles 7 to 8 mm thick colored (square/rectangular) area of each tile exc. 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for non - skid Ceramic tiles 7 to 8 mm thick colored (square/rectangular) area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for glazed ceramic tiles, digital tiles, matt/glossy finish tiles in vertical surface of size 450x350x7/350x250x7mm thick, laid over 15 mm thick rendering in cement mortar (1:3) and set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles, complete all as specified and as directed.

M&L for 10-18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps (grade - 202) of flat-30mm X 2mm , 150 mm long made to shape in each slab including spacers, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment, complete all as specified and directed.

M&L for 16 - 18 mm thick Dholpur stone gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area, laid over and including 15 mm thick cement screed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

M&L for 18 - 20 mm thick black machine cut granite slab (of any type in single piece) (table rubbed and polished), as in steps, jambs, pillars, window- cills, cooking platform including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab laid over and including 15 mm thick cement screed in cement and sand mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for 12 -15 mm thick granite work (of any type in single piece) (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 10 mm thick screed bedding layer in CM 1:3 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situation including making of hole suitable for gas pipe etc. complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, bed plates, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed

Taking up or down steel tubing and connections, 25 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed .

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and as directed

S&F in repair for Vitreous china single piece WC, size: 360x660x755 mm, with PP soft close slim seat cover, hinges cistern fittings, fixing accessories set, complete all as specified and directed. Make : ESSCO & Type : AIS-WHT-101851S220SPPSM

S&F in repair Vitreous China, table top wash basin, white, size 440x390 mm including waste pipe of polythelene of low or high density, complete all as specified and directed. Make : ESSCO & Type : AIS-WHT-101903

S&F in repair 15 mm bore, concealed stop valves, cast copper alloy, fancy type chromium plated, screwed down high pressure with adjustable wall flange screwed both ends for iron pipe or for unions complete all as specified and directed. Make : ESSCO & Type : APR-101069

S&F in repair 15 mm bore, 2-way bib cock with wall flange, cast copper alloy, fancy type chromium plated, screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed. Make : ESSCO & Type : APR-101041

S&F in repair Bib tap with wall flange, cast copper alloy, chromium plated, fancy type, screwed down, suitable for 15 mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified and as directed. Make : ESSCO & Type : APR-101037

S&F in repair pillar tap, single lever tall body without popup waste system, with 600 mm long braided hoses, cast copper alloy, chromium plated, screwed down high pressure,with or without lettered "Hot" or "Cold" suitable for 15 mm nominal bore iron pipe, screwed for iron pipe and fixed complete all as specified and as directed. Make : ESSCO & Type : APR-101005NB

S&F in repair wall mixer 3-in-1 system with provision for both hand shower & overhead shower complete with 115 mm long bend pipe, connection legs & wall flange , screwed for iron pipe and fixed complete all as specified and as directed. Make : ESSCO & Type : APR-101281

S&F in repair for overhead shower Square shape with 480 mm long shower arm, multi flow (ABS body chrome plated with gray face plate) with rubit cleaning system, complete all as specified and as directed. Make : ESSCO

S&F in repair for hand shower, multi flow 80 mm dia round shape with 1.5 m long spirochrome flex hose & wall bracket, complete all as specified and as directed. Make : ESSCO & Type : SAE-1931SH555

S&F in repair for health faucet (ABS Body) with 8 mm dia,1.20 m long flexible tube & wall hook, complete all as specified and as directed. Make : ESSCO & Type : ALE-ESS-593

S&F in repair of SS towel ring (square/rectangular shaped) 20mm dia, fixed complete all as specified and directed.

S&F in repair of SS towel shelf 600 mm long with lower hangers, fixed complete all as specified and directed. Make : ESSCO & Type : AEC-1181N

S&F in repair of soap dish (polycarbonate), fixed complete all as specified and directed. Make : ESSCO & Type : AEC-1133

S&F in repair of tumbler holder (polycarbonate), fixed complete all as specified and directed. Make : ESSCO & Type : AEC-1141N

S&F in repair sheet glass shelf assembly (corner) (set of 3) consisting of 5.5 mm thick sheet glass shelf (square shaped) with chromium plated bracket guard and railing, complete all as specified and directed.

S & F in repair, 500 ltr ISI marked three layer, white colour, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position including 20 mm brass ball valve complete all as specified and as directed.

S & F in repair, 1000 ltr ISI marked three layer, white colour, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position including 20 mm brass ball valve complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering ir required) for repairs, cleaning etc and hoisting if required re-connecting and re-fixing in position of capacity exc. 500 ltr but not exc 1000 ltr (cleaning repairing etc measured and paid separately), complete all as specified and as directed. Note: (i). Cleaning of tank shall be measured separately. (ii). If float valve is required to be replaced, the same shall be measured separately as supply only.

Cleaning and removing all scale , dirt etc form tanks and from mouths of circulating pipe etc of capacity exc 500 lts but not exc 1000 ltr with gunny bags and sands cleaning with fresh water and bleaching powder complete all as specified and as directed

Disconnecting existing tanks of capacity exc 250 litres & n exc 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. inculding refixing of float valve, gate valve, nipple socket all necessary fixures, making functional without overflow complete all as specified and as directed. Note: (i). Cleaning of tank shall be measured separately. (ii). If float valve is required to be replaced, the same shall be measured separately as supply only.

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc.capicity exc 250 ltr &nexc 500 litre with gunny bags ,sand cleaning with fresh water and bleaching powder and marking date of cleaning with CA No complete all as specified and as directed.

Supply only PTMT ball valve of 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denisty plastic ball screwed for iron pipe (minimum wt -210 grams) complete all as specified and as directed.

Supply only PTMT ball valve of 15 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denisty plastic ball screwed for iron pipe (minimum wt- 142 grams ) complete all as specified and as directed.

S&F in repair PTMT ball valve of 15 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denisty plastic ball screwed for iron pipe (minimum wt 142 grams for ball only) complete all as specified and as directed.

S&F in repair PVC cover thread type for PVC Water tank 500 ltr capacity and fixed with screw to tank complete all as specified and as directed.

S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

S&F of welded steel wire fabric ,weight n. exc 4.00 kg/sq. m fixed to steel members complete all as specified and as directed.

Demolition cement Concrete (unreinforced) of any description and any position not otherwise specifically provided for complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate with smooth finish including necessary form work complete all as specified and as directed.

Demolition & breaking up drain pipes AC, (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 100 mm/75 mm complete all as specified and as directed.

S&F PVC (SWR) pipe not less than 6 Kgf/sqcm rating single socketed, in any length with rubber ring joints including clamps of FI 40x3 mm fixed bolt 8 mm drilled to wall, in walls, type 'B' ISI marked of 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) pipe not less than 6 Kgf/sqcm rating single socketed, in any length with rubber ring joints including clamps of FI 40x3 mm fixed bolt 8 mm drilled to wall,in walls, type 'B' ISI marked of 75 mm bore complete all as specified and as directed.

S&F PVC (SWR) bend of 110 mm bore with access door of any radius complete all as specified and as directed.

S&F PVC (SWR) bend of 75mm bore with access door of any radius complete all as specified and as directed.

S&F PVC (SWR) branch piece, double (double Y) of 110 mm bore of equal or unequal complete all as specified and as directed.

S&F PVC (SWR) branch piece, double (double Y) of 75 mm bore of equal or unequal complete all as specified and as directed by Engineer in Charge

S&F PVC (SWR) P trap of 110 mm bore, complete all as specified and as directed.

S&F PVC (SWR) S trap of 110 mm bore, complete all as specified and as directed.

Fixing only flush pipes to pedastal pan including all joints complete all as specified and as directed by Engineer in Charge

Fixing only flush pipes to Orissa pan including all joints and making good to floors complete all as specified and as directed by Engineer in Charge

S&F in repair vitreous china wash down water closet (Pedestal pattern) white excluding (flushing cistern and flush pipe), complete all as specified and directed.

S&F in repair vitreous china squatting pan,Órissa pattern size 580 x 440 mm white, with integral foot rest and CI 'P' trap complete including provision of lime concrete bedding, all as specified and directed.

S&F in repair toilet paper holder with flat recessed type stainless steel, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, 10 lit capacity with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including brackets & 32 mm bore waste pipe of polythelene of low or high densitycomplete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm including complete all as specified and as directed.

S & F in repair of chromium plated shower rose 125 mm dia with 200 mm long CP arm with swivel joints, any size, including fixing to steel pipe or union complete all as specified & directed.

S&F in repair of Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F in repair of SS grating doom 100 mm dia fixed in floor, complete all as specified and directed.

S&F in repair Bib tap, cast copper alloy, fancy type long body with crutch or butterfly handle, screwed down, suitable for 15 mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified and as directed.

S&F in repair 15 mm bore stop valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm bore stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof coverings, complete all as specified and directed..

S & F Pre painted galvalume alumimnium zinc coating GI based corrugated steel sheet 0.50 mm thick, sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified and directed.

S & F Pre painted galvalume alumimnium zinc coating GI based plain steel sheet 0.50 mm thick sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified and directed.

S&F 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with ‘L’ or 'J' hooks, complete all as specified and directed.

Fixing only asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with 'L' or 'J' hooks, complete all as specified and directed.

S&F asbestos cement two pieces adjustable serrated ridge, 6 mm thick for corrugated or semi-corrugated sheets fixed with 'L' or 'J' hooks complete all as specified and directed.

S&F asbestos cement two pieces adjustable Plain wing ridge, 6 mm thick for corrugated or semi-corrugated sheets fixed with 'L' or 'J' hooks complete all as specified and directed.

Fixing only two pieces adjustable serrated ridge for asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with 'L' or 'J' hooks, complete all as specified and directed.

S&F for 2.0 mm thick, fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc., complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

Dismantling of posts or struts (wood, steel or RCC) embedded in concrete/brick work of any section, including taking out embedded portion and making good disturbed ground.

Dismantling timber scantlings 40 Sqcm and over in section from unframed work, complete all as specified and as directed.

Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section from unframed work, complete all as specified and as directed.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed.

M&L for cement concrete type B-2. 1:2:4 (using 40 mm graded aggregate) in foundations, filling and mass concrete, complete all as specified and as directed.

S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections,) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A', complete all as specified and directed.

S&F rolled mild steel Hollow section square or rectangular of wall thickness 3.25 to 4.25 mm thick, work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A', complete all as specified and as directed.

M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.

S&F MS plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality 'A', complete all as specified and directed.

Excavation in trenches, n. exc 1.5 Mtr wide and n. exc 1.5 Mtr in depth for foundation/laying of cable and getting out in soft/loose soil.

Removing of excavated soil to a distance n. Exc 50 Mtr and depositing where directed at a level n. Exc 1.5 Mtr above the starting point

Returning, filling in including spreading, levelling, watering and well ramming in layers n. Exc 25 cm thick.

Supply & spread unwashed dry river sand for sand cushioning and covering the under ground cable in trenches. (Note :- Punning thickness shall be measured.)

M&L for brick protection with sub Class`B` bricks old size laid dry, flat over cable perpendicular across the cable in trenches complete all as directed.

Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches / pipes or fixed on pole including taking down of the following sizes:-

6 Sqmm 2 core

10 Sqmm 2 core

16 Sqmm 4 core

M&L for road cutting in 300mm width & 450 mm depth & repair to existing with bitumen premixed incl 150 mm BM complete all as specified and directed by Engg in charge.

M& L for 40mm dia GI pipe light grade laid in trenches/floor or fixed to pole or walls complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light, fan, bell, or power) including complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials and making good disturbed surfaces of wall, floor & ceiling etc.

Dismantling of old U/S sub main wiring and service wire of any size & make.

Dismantlingof old U/S rusted main switch/DB of any size and capacity and make.

M&L point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in PVC conduit 20mm dia pipe with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size of PVC boards/ existing sunken box for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly complete all as specified and directed for the following :-

One light point controlled by one way switch.

One fan point controlled by one way switch.

One 3 pin 6 Amp socket point outlet on the same board with other switches

One 3 pin 6 Amp socket point outlet on the independent board

All as per item No 131 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified and directed.

S&F ceiling rose surface bakelite 50 x 40 mm three terminal ISI marked including suitable size of PVC board.

S&F socket outlet 2 in 1, 3 pin 5 Amps multi purpose flush type 230 volt .

S&F switch socket combinatin 2 in 1, 3 pin 5 and 15 Amp flush type multi purpose 230 volt.

S&F switch piano flush button single pole one way 6 Amps 230 volt grade.

S&F step type electronic fan regulator 5 step 120/280 volts of 400 Watt capacity ,socket flush type including connecting up complete all as specified and directed.

M&L bell multi musical type 230 volts grade.

S&F modular Socket, 6A - 2/3 pin combined 2 module 230 volt.

S&F modular Socket 6A/16A - 2/3 pin combined 2 module 230 volt.

S&F modular switch 1 way 6 Amps 1module 230 volt grade.

S&F modular switch 1 way 16 Amps 1module 230 volt grade.

S&F modular bell push flush type 5 Amps 230 volts.

S&F modular step type electronic fan regulator 2 module 120 watt.

S & F white cover plate with frame,2 module

S & F white cover plate with frame,6 module

S & F white cover plate with frame,8 module

S & F white cover plate with frame,3 module

S & F Metal flush box 2 module Make: Legrand Cat No:6890 07 or equivalent in L&T, Benlo

S & F Metal flush box 8 module. Make: Legrand Cat No:6890 42 or equivalent in L&T, Benlo

S & F Metal flush box 3 module

S & F Metal flush box 6 module

M & L for Distribution board factory made and tested sheet metal enclosure powder coated suitable for mounting the MCB 415/240 volt of the following DBs :-.

4 way TPN with 200 amps rated busbar 415 volts (double door type).

8 way SPN with 200 amps rated busbar 240 volts (double door type).

4 Way SPN with 200Amp rated busbar 240V (Double door type)

S&F MCCB, MCB with GI hardware fixed in DB's of the undermentioned type and rating. Note: MCB & DB shall be of same make

MCB SP 240 volts 6-32 Amps C Curve

MCB SPN 40-63 Amps, 240 volt C Curve

MCB TPN 40-63 Amps, 415 volt

Taking down and S&F 120 watts LED flood light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source and suitable drivers etc to complete all as specified and directed by Engg in charge.

S&F in repair Linear LED Retro fit of 20 watt with extruded aluminium body,PC diffuser and inbuilt driver including compact batten suitable for LED lamps , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1 Sqmm Make Crompton or equivalent in Bajaj/Havells/Philips/Crompton.

Supply and fixing cove lighting 5 meter LED strip light with driver having 120 LEDs offering 460 lumens/meter for ceiling with 2 colours in one strip can be changed with toggle of the switch (warm white + Blue) of suitable size complete

Supply and fixing LED mirror light fitting with high out put with low energy consumption of capacity 6 watt,waterproof moisture anti-fog anti-corrosion anti-rust,curved LED off-white including connecting up with three core flexible copper conductor cable of suitable size complete

M&L submain wiring complete with 4 Sqmm single core multi stranded PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor in and including drawn through 25mm dia PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling etc.

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

M&L bracket light fitting wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base. all as directed by Engr-in-charge. Make: Havells or equivelent in Cromption/ Bajaj etc

M&LDecorative, wall mounting, brushed nickle finish fixture with opal glass diffuser suitable for 4 W LED filament lamp E14 base all as directed by Engr-in-charge. Make: Havells Cat part No. LHFOAIC1TZ1C040 or equivelent in Cromption/ Bajaj etc

M&LDecorative indirect post top for garden & landscape lighting with IP 65 protection. Resistant to impact and corrosion. Anti Glare and uniform distribution fixed on required pipe with wire mesh cage all as directed by Engr-in-charge. Make: model No LPTOI-45-CDL of crompton or equivelent in Havells/Phillips

S&F sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 20 Amps, 240 volts. Make- L&T, Havells, Legrand complete all as per specified by Engr-in-charge.

Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 3 Mtr below the ground level with the top edge of earth plate, depth not less than 2.25 Mtr below the ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts and washers protected by GI tubing light grade 40 mm dia uptoTest point 20 mm dia watering pipe with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in any type of soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm all as required specified & directed by engr in charge ( Note:- Up to 7.5 Mtr length of pipe of 40 mm dia and GI strip shall be deemed to be included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5) will be measured separately under respective item.

Taking down and S&F 35 watts LED Building light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source complete all as specified and directed including, Make :- Crompton / wipro / Havells / Philips.

S & F street light GI bracket of 1.2 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers with fixing of LED street light complete necessary fixing arrangements on pole as directed.

S & F 4 sqmm solid conductor 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable flat or circular from junction box to fitting complete all as specified and directed by Engg in charge.

S&F LED Recessed full lit luminaire with glare free uniform illumination 2 ft x 2 ft, 24 Watt , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1.5Sqmm . Make Bajaj/Havells/Philips/Crompton.

S&F LED surface mounted LED panel injection molded in thermally conductive engineered plastic - FR V0 grade housing, diffuser with high optically efficient material. , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1.5Sqmm .Make Bajaj/Havells/Philips/Crompton.