Restoration of Type-3 qtr.

Amount

Dismanteled Reinforced cement concrete1:2:4 incl stacking of dismanteled materials as directed by Engineer-in -charge with in distance of 60 Mt. As per IDSOR CH. 6/2

Dismanteled of existing plaster including disposal of refuse with in a distance of 60 m.As per IDSOR ch 6/6

Dismantling brick work or stone work and cement concrete in cement mortar and including stacking of material with in a distance of 60M as per direction of Engineer-in-charge . As per IDSOR Ch 6/1.

Scraping old white or colour wash including disposal of refuse with in 60 m.As per IDSOR Ch. 6/9

Ist class brick work in 1:4 (1part cement & 4 part course sand) CM incl. all material labour T&P etc for proper comp of work.

12.0 MM thick cement plaster in 1:4 (1part cement & 4 part course sand) CM incl all labour material T&P etc comp.

Supply and fixing salwood wrought framed and fixed i/c simple molding straight work as in choukhat frame i/c supply of all meterial labour T&P etc required for proper complition of work as per PWDSOR Ch. 9/1/9.1.2.

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frameof 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws, steel handels sliding bolt, door stopper and tower bolt .As per PWD SOR Chap 9/38/9.21(a)

Providing and fixing of fly proof wiring gauge to window , clerestory,windows and door with ms flate 15x3mm and nut and bolt comp. stainless steel (grade 304) wire gauge of 0.5mm dia wire and 1.4mm aperature in both sides . As per PWDSOR ch 9/34/10.29.2.

Providing and layig vertified tiles of sized 600x600 mm size with water absorbation less than 0.08% an confirm IS15622 of approved brand &manufracturer in all colour and shade in shkirting , rise of step laid over 12mm thick bed of 1:3 cement mortar (1cement:3course sand) , jointing with grey cement slurry @3.3kg /sqm i/c grouting the joint with white cement and matching pigment etc complete. supply of all material labour T&P etc for proper complition of work. as per PWD SOR Ch . 14/14/11.46.

Providing and laying in position machine mixed of 1:1.5:3 concrete mix for reinforcement cement concrete work using cement content as perapproved design mix including pumping of concrete to site of laying but excluding cost of centering and shuttering, finishing , and reinforcment including adimixture in reccommended praportions as per IS:9103 to accelarate retarding setting of concrete improving workability without impairing strength and durability as per direction of Engineer-in-charge.

Centering and shuttering of CC work including rent of shuttering material, labour and T&P required for proper completion of work for slab, lintels, sun shads, columm & walls etc. as per IDSOR Ch-7/4

P/L Steel reinforcement i/c cutting, bending, binding & placing in position. In slab and sun-shade i/c labour T&P etc complete.

Finishing wall with putty approved brand and manufacturer on decorative on wall surface to give an even shade over i/c curing and cost of all material , labour T&P for proper complition of work. as PWDSOR ch. 15/31/new.

Destempering with oil bounded destempering of approvel brand and manufracturer and of required shade on undercoated wall surfaceto give an even shade over & i/c a priming coat with cement primer of approved brand and manufracturer such as Berger, J&N salimar, asian , paints after throughly frushing the surface free from moertar dropping and other foreign matter and also i/c preapering of the surface even with plaster of approved synthetic material and sand and papered smooth i/c cost of all materials. as per PWDSOR ch 15/13/649.

Finishing wall with exterior emulsion paint apex) is approved brand and manufracture and off required shade on un decorated wall surface to give even shade over @1.25ltr/10sqm i/c one coat of primer applied@ 0.75 ltr./10sqm coat curing and cost of all material, labour T&P etc complete for proper complition of work for two coat .as per PWDSOR ch 15/35/New

Applying first coat of any aproved preservative on a new wood work and wood based surface i/c prepearation of surface through cleaning oil grease dirt and forgein matter sand preapering and knoting i/c cost all materials.as per PWDSOR ch. 15/17/654.

Removing oil paint or varnish from steel and other metal surface and paint remover of approved brand and manufracturer or with caustic soda and making the surface even i/c cost of all materials. As per PWDSOR ch15/20/657.

Painting 1st over priming coat (but excluding cost of priming coat) on steel and other material surface including cleaning the surface of all dirt, dust and other foreign matter and papering and stopping including cost of material, labour tool and paints etc.required for proper completion of work, paint shall be used as per standard 1.5 specification as per IDSOR Ch 12/2a.

Provding and laying brick coba 12 mm thick laid with M-15 class brick bat coba 7.50 cm thick with gape of 15mm to each other over 20mm thick base of cement mortar 1:4 cement and course sand mixed with water proffing compoud spreading cement slurrymixed with acrelic cement concrete water proffing compound filled gapes of coba and top of coba mortar mixed with water proffing compound in 1:4 cement and course sand mortar finished smooth and top mashed fase squre 30x30cm and side wall parrapet shall mono tythic plaster wall upto 30cm higher and junction and corner shall be rounded by ballast cement and course sand masonary coba with top finished plaster mixed with acitic water proffing compound @2% by weight i/c supply of all material, labour, T&P etc complete for proper complition of work. asper PWDSOR ch 11/8.

Providing and placing on terrace (at all floor level) polythelene water storage tank IS12701 mark with cover and suitable locking arrengment and macking necessary holes for inlet, outlet and overflow pipe w/o fitting the base support of tank .as per PWDSOR Ch 23/15(18.48).

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap: As per Delhi PWDSOR Ch. 17.7.4.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. As per Delhi PWDSOR Ch. 18/8 (A) 15 mm Nominal Dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. As per Delhi PWDSOR Ch. 18/8 (B) 20 mm Nominal dia

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : pan with ISI marked white solid plastic seat and lid As per Delhi PWDSOR Ch. 17.2.1

Making connection of G.I distribution branch with G.I main of following size by providing and fixing tee i/c cutting and threading the pipe etc complete 20mm to 40mm nominal bore . As per PWDSOR ch 23/7/18.13.1

Providing and fixing brass bib cock of approved quality 15 mm nominal bore. As per PWDSOR ch 23/8/18.15.1

Providing and fixing of C.P. brass stop cock (concealed) of standered design and approved make confirming to IS: 8931 15mm nominal bore.

Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per IS13983 with CI Bracket , cutting and making good the wall whatever required . 510x1040 mm bowl depth 178mm. As per PWDSOR ch 24/17.10.1.3

Providing and fixing 600x450mm beveled edge mirror of superier glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete .as per PWDSOR ch 24/14/17.31

Constructing brick massonary main whole in cement mortar 1:4 (1 cement : 4 coures sand) with R.C.C top slab with 1:2:4 mix (1cement : 2course sand : 4 graded stone aggregate 20mm nominal size), fuondation concrete 1:4:8mix(1cement : 4course sand : 8 graded stone aggregate 40mm nominal), 1n side plastering 12 mm thick with cement mortar 1:3 (1cement:3 course sand) finished with floating coat neat cement and making channel in cement concrete 1:2:4(1cement : 2course sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standered design. inside size 900x800mmand 500mm deep i/c C.I cover as per PWDSOR ch 25/4/19.7.1(a)

Excavation trenches of required withed for pipes , cable etc i/c excavation for soket and dressing of sides ramming of bottem depth upto 1.5m i/c getting out the excaveted soil and trench returning the soil as required in layer not exceeding 20cm in depth i/c consolidation each deposit layer by raming watering etc and deposing of surplus excavated soil as directed with in a lead of 80m.in all kind of soil .pipe and cable etc exceeding 80mm dia but not exceeding 300mm dia as per PWDSOR ch 25/10/2.10.1

Providing laying and jointing glazzed stonware pipe class SP-1 with stiff mixture of cement mortar in prportion of 1:1 (1cement:1fine sand ) i/c testing of joints etc complete as per PWDSOR ch 25/19.1.2(b)

Wiring point for light and fan with 15 mm P.V.C. / VI.R insulated single core cable in heavy gauge rigid steel conduit pipe on surface complete with 8 SWG G.I. earth continuity wire and piano type switch etc. complete in all respect.

Wiring point for H.P.M.V. / H.P.S.V. Lamp with 2.5 Sq. mm P.V.C. / V.I.R. insulated single core cable in heavy rigid steel conduit pipe on surface complete with 8 SWG G.I. earth continuity wire with 15 Amp. metal clad / S.P.N. Switch etc. complete in all respect.

Supplying and fixing of 16A 240V D.P. metal clad Rewirable type switch fuse unit on teak wood board complete in all respect as per IDSOR Ch. 23/elecrical/2(b).

Suplly and fixing of 10cm internal dia ac downpipe complete with roseheads ,bend MS clamp 2.5cmx3mm fix to wall by 15cm long 6mm dia nails and i/c repair plaster of plaster pointing etc. if deamge during fixing of the pipe i/c cost of all material , labour, tool and plant etc required for proper complition of work.

S.S.ENTERPRISES

Rao Construction