Supply of Furniture for various RVPN offices at Vidyut Bhawan Jaipur

Amount

Supply of Executive High Back Revolving Chair - The seat and back shall be made up of 1.2 ±0.1cm. thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of the back shall be 49.0 cm. (W) x 71.0 cm and of seat shall be 49.0 cm. (W) x 44.0 cm. (D). The HR Polyurethane foam shall be moulded with density= 45 ±2 kg/m3 and Hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The armrest tops shall be injection moulded from black Polypropylene. They shall be fitted to tubular armrest supports made of dia 2.54 ±0.03cm. x 0.16 ±0.0128cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns ). The tubular armrest supports should hold together the seat and back. The mechanism shall be designed with 360° revolving type, 1r ±2° maximum tilt on pivot at center, Upright position locking, Tilt tension adjustment. The pneumatic height adjustment shall have an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be fabricated from 0.2 ± 0.02 cm thick HRsheet (IS :DD 1079/ HR ), powder coated .(DFT 40-60 microns ) and fitted with an injection moulded black Polypropylene hub cap and 5 nos. twin wheel castors. The pedestal shall be 60.0 ±0.5cm. pitch-centre dia. (70.0 ±1.0 cm. with castors).The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 42.4 to max 53.4cm, Height - min102.4 to max 113.4cm, Width & Depth of Chair as measured from pedestal - Width-70.0 cm and Depth-70.0 cm.

Supply of Executive medium back chair with seat/back made of dimensions 50.0 cm (W) x 45.0 cm (H) (approx.) and overall height of Chair 90.0 cm (approx.) with a seat height of 55.0 cm (approx.) ; Overall width & depth of chair from pedestal 70.0 cm (W) x 70.0 cm (D) (approx.) ; Upholstered with fabric, High resilience polyurethane foam armrests and tubular frame; Center tilt mechanism, 360 degree revolving mechanism, 17 + /- 2 deg tilt on pivot at center, Upright position locking. Tilt tension adjustment Pneumatic height adjustment, Telescopic bellow assemble, Pedestal assembly with twin wheel castors of standard make.

Supply of visitor Cushioned chair with seat/back made up of dimensions 50.0 cm (W) x 45.0 cm (H) (approx.) and overall height of Chair 80.0 cm (approx.) with a seat height of 45.0 cm (approx.) ; Overall width and depth of chair from pedestal 55.0 cm (W) x 61.0 cm (D) (approx.) upholstered with fabric high resilence polyurethane from armrests and tubular frame.

Supply of office table of size 1220mm (L) x 610 mm (W) x 750 mm (H) . The top panels shall be made from 25 mm thick Pre - laminated boards with 2 mm thick PVC edge beading on all sides . Under structure shall be made from 0.9 mm thick powder coated 50 microns CRCA sheet & MS Tubular Frame of size 25.4 mm square thickness 1.2mm MS ERW tube. Modesty panel shall be made from 1.0 mm thick powder coated 50 microns. The table is general office working table having M.S. three box drawer unit on one side. There should be 10 lever cam lock plus handles built in plastic on all storage unit. All steel component will be powder coated epoxy polyester paint and bottom rubber stoppers on all legs.

Supply of office table of size 2105 mm (L) x 1100 mm (W) x 750 mm (H) . The top panels shall be made from 25 mm thick Pre - laminated boards with 2 mm thick PVC edge beading on all sides . Under structure shall be made from 0.9 mm thick powder coated 50 microns CRCA sheet & MS Tubular Frame of size 25.4 mm square thickness 1.2mm MS ERW tube. Modesty panel shall be made from 1.0 mm thick powder coated 50 microns. The table is general office working table having M.S. drawer units on both sides (One drawer/box & one filing drawer at one side & one three box drawer unit on other side. There should be 10 lever cam lock plus handles built in plastic on all storage unit. All steel component will be powder coated epoxy polyester paint and bottom rubber stoppers on all legs.

Supply of steel almirah with spray paint finish with 2 steel doors, 3 way bolting system having a rigid 7 lever unpickable lock with duplicate CP key doors & shelves made out of 20 gauge sheet & rest body made out of 22 gauge sheet size 50”x36”x19”(Including 5“ bottom support in over all height) with three fix shelves so as to make four compartment.

Supply of steel side rack of size 750mm (L) x 380 mm (W) x 750 mm(H) fitted with 3 nos steel sheet having exposed edge of sheet bend up to minimum of size 20mm having thickness 0.8mm with 4 slotted angles of size 35X35X1.8 mm minimum fitted with corner plates and Hex Nut, Bolt, rubber stopper at bottom of legs. All steel components shall be powder coated epoxy polyester paint.

Supplying and fixing Computer table of size: 1200 x 600 x 750 cm for sides, vertical, bottom, door and back made of 18 mm pre laminate particle board. Top of table finished with pre laminated particle board and edge banding with same colour PVC tape. One drawer of 40 x 50 x 18 cm size, one cupboard with self, CPU Stand, Foot Rest, Key board tray fitted with necessary fittings such as wire / cable manager, auto closing hinges, stainless steel handle, multipurpose lock, sliders, necessary bushes etc. with fully closed back panel.

Supply and fixing of steel angle rack made up of angle size 35x35x5 mm, each member connected by welding alongwith four number compartments in each rack with angle size 35x35x5 mm &12 mm accoustic board compartment base for placing material. The steel angle rack have size 1.80x0.90x0.45 Mtr with bottom leg minimum 150 mm. Each compartment have height of 450 mm and total weight of each rack is 54.25 Kg minimum. The rack is complete with enamel paint & applying a priming coat of approved steel primer alongwith loading and unloading of steel rack at required places.

Daniel Furnitures P Limited (BID ID -2971478)