Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.8 LAccepted-AOC | ₹9.8 L | L1 | Accepted-AOC lowest rate quoted by the tenderer hence the tender is accepted |
| 2 | L2₹9.9 LRejected-AOC | ₹9.9 L | L2 | Rejected-AOC higher rate quoted compared to lowest tenderer quoted rate |
| 3 | L3₹9.9 LRejected-AOC | ₹9.9 L | L3 | Rejected-AOC higher rate quoted compared to lowest tenderer quoted rate |
| 4 | L4₹10.0 LRejected-AOC | ₹10.0 L | L4 | Rejected-AOC higher rate quoted compared to lowest tenderer quoted rate |
Tender Value
Refer Docs
EMD Value
₹9,800
Closing Date
3 Feb 2026, 3:00 pmClosed
Executive Engineer
Executive Engineer Buildings C and M South Presidency Division Chepauk Chennai 5
Special repairs to the damaged walls and doors of G 3 and ornamental CNC designs for adjacent room in III Block at Rajbhavan Chennai 22
2026_PWD_649941_1
TNPWD/42-09/15M/2025-2026
Open Tender
Civil Works
60 days
Raj Bhavan Chennai
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹9,800
2 Mar 2026
2 Feb 2026
3 Feb 2026
2 Feb 2026
3 Feb 2026
2 Feb 2026
Supply and fixing of ornamental CNC made HDHMR (high density high moisture resistance) board of 16 mm thick applied on top of first layer panelling to achieve as per approved design. 2400 mm x 100 mm x 16mm thick CNC border of 32 mm thick curved on one side and will be attached as per design. 5 mm gap will be groved between each panel to seperate each carnish to highlight the design.As followed earlier HDHMR board fixed with help of screws and fevicol for better bonding strength, metal paste to be applied in the gaps between first layer and second layer Carnish. self made carnish are curved by CNC Laser cutting machine using cutting bit of 6mm to acheive 32 mm curvature. 5mm grove between lintel area to highlight the design, etc., complete complying with standard specification and as directed by the departmental officers at site of work.
Manufacturing, supplying and fixing of customised CNC made carnish of size 2400 mm x 18 mm x 12 mm thick drilled on top of third layer in HDHMR board along with 3D carnish on four ends. Sizes will be altered according to approved design. 12 mm thick CNC carnish has custom made three layers of shape. 3/4" headless nails and pro bond will be used to attach the piece on third layer for higher bonding, etc., complete complying with standard specification and as directed by the departmental officers at site of work.
Manufacturing, supplying and fixing of Ornametal 3D Patterned design of thickness 18mm and beeding of size 250 mm x 250 mm self made custom design through CNC lazer art cutting machine using 3 mm bit for better finishing. Design Crafted through artcam and converted to customised 3D pattern. the prepared mould to be nailed in second level wall panelling and gaps to be filledwith Metal paste and NC putty for better finishing, etc., complete complying with standard specification and as directed by the departmental officers at site of work.
Painting the wall with rubbing the wall surface coarser sand paper. After minor repairs, the surface is again rubber using sand paper No.100 and cleaned. using suitable duco paint putty is applied and the surface is left to dry, after rubbing the surface with sand paper No.120 and the surface is cleaned & kept dust free. Using duco primer is applies and the surface is left to dry, after rubbing the surface with thinner using emery cloth and putty 2/3 times surface is being made even and smooth. first coat of duco paint is applied evenly with spray machine and the surface ia again left for drying 100%. Applying second coat od duco paint. Finally rubbing is done usingthinner to give final finish. the rate includes cost of all materials and labour charges etc complete complying with std spn, and as directed by the deptl. officers
Polishing the wood work with melamine varnish of approved quality including thorough scrapping the existing surface varnishing with two coats of best wine varnish neatly and spraying third coats of best approved quality of melamine polish including cost of materials and necessary spraying machine with compresser and as directed by the deptl. officers
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.13 MB
BOQ_779280.xls
BOQ • 0.28 MB
CONDITION09.pdf
Tender Documents • 0.56 MB
Download all tender documents and submit your bid