Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹14.6 L
EMD Value
₹29,285
Closing Date
28 Oct 2026, 2:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EXECUTIVE ENGINEER
UTTAR DINAJPUR HIGHWAY DIVISION PW ROADS DIRECTORATE TULSHITALA RAIGANJ UTTAR DINAJPUR
Chopra Udrail Road, Bridge at 5th Km repairing and renovation work under Uttar Dinajpur Highway Division in the district of Uttar Dinajpur
2026_WBPWD_5078414_1
EE/UDHD/WB/PWRD/NIT_12 of 2026_27
Open Tender
CIVIL WORKS
Percentage
30 days
RAIGANJ
Please refer Tender documents.
4 documents required · 4 mandatory
₹29,285
Yes
CHAMBER OF EXECUTIVE ENGINEER
8 Oct 2026
8 Oct 2026
30 Oct 2026
8 Oct 2026
28 Oct 2026
13 Oct 2026
12 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each template cross wall in dry wall asonry shall be built about a meter thick & to the full height of the specified thickness of appron at 30 mt. interval complete as per drawing and Technical specification (Reference to MORT&H's specification 2503).
Boulder Laid Dry Without Wire Crates. | 31.68 | Cum | 4,098.46 | ₹1,29,839.21 |
| 2 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material (Reference to MORT&H's specification 304). Ordinary soil, Manual Means, Depth upto 3m. | 47.52 | Cum | 151.66 | ₹7,206.88 |
| 3 | Plain/Reinforced cement concrete in sub-structure complete all including vibrating and compacting, finishing, curing, sampling, testing etc. by mechanically mixed as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200). PCC Grade M20. Height upto 5m. | 15.84 | Cum | 7,662.04 | ₹1,21,366.71 |
| 4 | Applying epoxy mortar over leached, honey combed and spalled concrete surface (@ 20-24 kg of Epoxy mortar/sqm) and exposed steel reinforcement complete as per Technical Specification (Reference to MORT&H's specification 2804). Thickness of epoxy mortar = 10mm | 239.4 | Sqm | 576.83 | ₹1,38,093.1 |
| 5 | Drainage Spouts not less than 100 mm dia of corrosive resistance material ,spacing not exceeding 10 m. complete as per drawing and Technical specification (Reference to MORT&H's specification 2705) | 6 | Each | 1,184.35 | ₹7,106.1 |
| 6 | Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per Technical Specification (Reference to MORT&H's specification 2807). | 241.14 | Sqm | 1,082.22 | ₹2,60,966.53 |
| 7 | Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy (Reference to MORT&H's specification 2800). | 256 | Each | 207.63 | ₹53,153.28 |
| 8 | Sealing of cracks/porous concrete ( within the limits of practical pressure 100kpa -400kpa until refusal ) by injection process through nipples/Grouting complete as per Technical Specification (Reference to MORT&H's specification 2806).
Cement Mortar (1:1) Grouting. | 256 | Kg | 974.23 | ₹2,49,402.88 |
| 9 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars above 12 mm diameter | 78 | Mtr. | 16.14 | ₹1,258.92 |
| 10 | Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. | 480.54 | Sqm | 375.24 | ₹1,80,317.83 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.75 MB
2911NEW.pdf
Tender Documents • 0.29 MB
BOQ_5178360.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .