Karnataka

Active

Works

Other Works

Construction of CC road from behind Zilla Panchayat to the main road near Social Forestry Department, deck and drain work, installation of pride gate, installation of pavers, chain link fencing and electrical work (ST category)

Rural Development and Panchayat Raj Department

RDPR Division Office Shivamogga | Shivamogga, Karnataka

Amount: ₹41.1 LCloses: 20 Jul 2026

Tender Value

₹41.1 L

EMD Value

₹41,500

Closing Date

20 Jul 2026, 9:30 pm

Tender Inviting Organisation

Name

Rural Development and Panchayat Raj Department

Work Description

Construction of CC road from behind Zilla Panchayat to the main road near Social Forestry Department, deck and drain work, installation of pride gate, installation of pavers, chain link fencing and electrical work (ST category)

Tender Information

Tender ID

RDPR/2026-27/OW/WORK_INDENT27739

Reference Number

RDPR/2026-27/OW/WORK_INDENT27739

Tender Type

Reserved

Product Category

Other Works

Location

RDPR Division Office Shivamogga

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredAnnual Turn Over Certificate

RequiredGST Registration Certificate

RequiredWork Done Certificate

RequiredRegistration Certificate.

RequiredST Category Certificate.

RequiredDoicile Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee (Min Rs.500/- and Max Rs.7500/-) and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. The tender processing fee is not refundable.

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund.

The tenderer should quote his rates with all lead and lifts, loading and unloading including cost of labour, hire charges of machinaries and other incidental charges etc complete as per specification and directions of the Engineer incharge of the work.

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

Contractors should have to upload the scanned copy of all necessary qualification documents, and submit the original documents certificates after opening the tender for evalution and verification.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Within 20 days of receipt of Letter of Acceptance, the successful Tenderer shall deliver to the employer a Security Deposit in the form of NSC/DD/ FDR in favor of the Executive Engineer, P.R.E. Shivamogga, for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with the conditions of contract.

Successful Bidder shall pay Contract Management Module processing fees of 0.025 percent of the contact value (Min Rs.500/- and Max Rs.7500/-) when bills are raised using Contract Management Module.

Self declaration of machineries are not accepted.

Third party inspection is mandatory for all the works in this programme.

The Employer reserves the right to reject any or all tenders without assigning reason.

Tenderer must submit his present accurate postal address and phone / cell phone number.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The Furnished E.M.D. will be released only after successful execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier.

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of completion of the work.

The Tenderer at his own responsibility and risk is encouraged to visit and examine the Site of Works and its surroundings and obtain all information that may be necessary for preparing the Tender and entering into a contract for construction of the Works. The cost of visiting the Site shall be at the Tenderer own expense.

All other conditions and requirements has to be fulfilled as per the KW Standard Bid Document.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

The GST will be paid separately to the Contractors as per the Guidelines of the Government.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

All materials required for the work, shall be procured by the tenderer himself and should be got tested by the Department quality control authorities at his own cost before use for the work. If employer wishes to engage third party inspecting agency for the said work, apart from the quality control authorities, then the contractor should cooperate with the third party for test

In the case of death of the contractor after executing the agreement/ commencement of the work, his legal heir, if is an eligible registered contractor and is willing, can execute and complete the work at the accepted tender rates in the same terms and conditions of the contractor of the work

Corrigendum/Modifications/Corrections if any will be published in the KPPP website only.

The work should be executed as per the KTPP Act.

The work should be completed within the stipulated time period from the date of issue of work order including Rainy Season.

As Per Govt Order No: DMG/SG/BUD/KRIDE/2025-26 Dt: 12.11.2025. All the works excuting departments shall make it mandatory in their tender document for their contractors to obtain Mineral Dispatch Permit (MDP) from Mines & Geology Department For the use of minor minerals in Government Works. And accordingly, the Additional Chief Secretary/ Principal Secretary / Scretary to the Government of all the Departments shall issue direction to all the Govenment works excuting departments under them . And The same MDP shall be submitted by the contractors along with the bills to the work executing department for proving the payment of Royalty and other fees.

If the documents uploaded on the KPP portal are found to be fake, their EMD will be confiscated and a recommendation will be made to the competent authority to cancel the contract.

Technical Criteria

Past Experience

The bidder must submit last 5 years Profit and loss account obtained from Chartered Accountant (CA) Only.

Audited CA Certificate of Annual Turnover

To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-26) Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least any construction Work of value not less than Rs. 10.26 Lakhs

Work Done Certificate

Capabilities of Vendor

The Tenderer should possess valid Registration Certificate.

PWD Registration Certificate (Class I/II/III/IV)

Statement indicating the (A)Existig commitments and ongoing works, (B)Details of works for which tenders are already submitted . The statements should furnished as per statement 1.5 (A),(B) of Section 3 of Qualification information in Standard Bid document.

Others -- Statement indicating the (A)Existig commitments and ongoing works, (B)Details of works for which tenders are already submitted . The statements should

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e., 2021-22-2025-26) Achieved in at least one financial year (i.e. 2021-22 to 2025-26) a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 41.06 Laksh

Audited CA Certificate of Annual Turnover

Fee & Financial Details

Tender Fee Amount

₹1,030

EMD Fee Amount

₹41,500

Important Dates

Last Activity

5 Jul 2026

Published

5 Jul 2026

Bid Opening

21 Jul 2026

Download Ends

18 Jul 2026

BOQ Preview

•

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. (Page. 187 l. No.19.2.1 of PWD CM SR 2...

•

Earth work excavation by manual means for drains,canals and similar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, c...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Supplying, fitting and placing Mild Steel Reinforcement complete as per drawing and technical specification. (Page. 18 l. No.2.12 of PWD CM SR 23-24) V-1

•

Providing and fixing factory made precast RCC perforated drain covers,having concrete of strength not less than M-25, of size 1000 x 450x50 mm,reinforced with 8 mm dia four nos longitudinal & 9 nos cr...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lig...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing Thermo-Mechanically Treated bars of grade Fe-550D Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position, binding and anchoring to adjacent members...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of ...

•

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...

•

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

•

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...

•

Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface preparation (PWD SR 2023-24 Vol-3, P.No.78 I.No.8.5...

•

Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS C...

•

Dismantling chain link fencing including removing the posts, cement concrete fedestals, foundation and stacking the useful materials safely at a distance to the appropriate disposal area as per direct...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the directi...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Procurement of Ingredients: Procurement of farmyard manure/compost, sand and red-earth (ingredients) required for raising seedlings inclusive of transportation, breaking of clods, sieving and heaping ...

•

Supplying heavy gauge PVC conduit pipe 25 mm dia 2mm thick confirming to IS2509 with suitable size bends, metal/PVCJunction boxes, adhesive paste etc., and running be fore concreting the slab. The con...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall,including necessary rawl plugs,Machine/NF ...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos.of machines crews,bolts nuts etc.,complete on the existing meta...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch (Page No. 9 / Item No. 3.6.1 PWD Elect SR V-6) 23-24

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket (Page No. 9 / Item No. 3.6.3 PWD Elect SR V-6) 23-24

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch (Page No. 9 / Item No. 3.6.9 PWD Elect SR V-6) 23-24

•

Supply of LED pole mounting type post top lantern with pressured ie cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection ...

•

Earth work excavation for Foundation by mechanical means for allworks& depth upto 3 m, as per drawing and technicalspecifications,including setting out,shoring, strutting, barricading, caution lights,...

•

Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. Thegranite/trap/basaltcrushedgraded coarse aggregatesand fine aggregatesas per relevant IS Codes...

•

Providing and laying in position Reinforced cement concretefor all Foundation works. Thegranite/trap/basaltcrushed graded coarseaggregatesand fine aggregatesas per relevant IS Codes machinemixed with ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials machinerylabourcleaningstraightening cutting, bending hooking laping/welding jointstying with bindi...

•

Fabricating,supplying and erection of. ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements,inc...

•

Supplying, and fixing of Hot dip Galvanized M.S. Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.Double Arm Bracket with 1500 mm Stand...

•

Supply of LED Street light luminaire with pressured ie cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyca...

•

Fabricating supplying and mounting MS box made out.SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wit...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63 A (P.NO-14 ,I.NO-5.7.3) (KPWD ELE SR 2023-24)

•

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.50Amps (...

•

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. ( P.NO-21,I.NO-5.48) (KPWD ELE SR 2023-24)

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 Mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

•

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

•

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm,...

•

Providing and laying Double wall Corrugated HDPE pipes for Electrical. Telecommunication & Signalling lines having flexibility & anti termite, anti corrosive, good abrasion, fatigue strength & UV resi...

•

Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 50 Sqmm, 4 Core (P.NO-14 I.NO-34.07) (ESCOM ELE SR 2023-24

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

ESTIMATE.pdf

Tender Document • 17.15 MB

KW-2.docx

Tender Document • 0.06 MB

OM.pdf

Tender Document • 3.30 MB

Ready to Participate?

Download all tender documents and submit your bid