REPAIR REPLACEMENT OF VARIOUS STEEL FURNITURE AND TRADE PATTERN INCLUDING POLISHING AND PAINTING OF OTM AREA AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

Almirah Steel Medium:- Taking out of broken door shutter from Almirah med Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing. (drawing No FD-67(M)/ 1032/TP)

Removing the worn out u/s handle from the almirah and providing/fixing of new handle chromium plated heavy quality as approved by Engr-in-Charge. (drawing No FD-67(M)/ 1032/TP)

Removing the worn out u/s lock from almirah and providing/fixing with new lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved by Engr-in-Charge duly fixed as per drawing. (drawing No FD-67(M)/ 1032/TP)

Removing the worn out u/s 3 way locking device and providing/fixing the new one in its original postion as per drg. (drawing No FD-67(M)/ 1032/TP)

Removing the worn out u/s leg and providing / fixing the new leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg. (drawing No FD-67(M)/ 1032/TP)

Taking out of u/s worn out shelf and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg. (drawing No FD-67(M)/ 1032/TP)

Removing the worn out paint from internal/external surface of almirah steel large by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of Metal primer to bring the surface to a glossy shine as directed by Engr-in-Charge. (drawing No FD-67(M)/ 1032/TP)

Almirah steel large :- Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing . (drawing No FD-1031/TP)

Removing the worn out u/s handle from the almirah and providing/fixing of new handle chromium plated heavy duty as approved by Engr-in-Charge. (drawing No FD-1031/TP)

Removing the worn out u/s lock from almirah and providing/fixing with new lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved by Engr-in-Charge duly fixed as per drawing. (drawing No FD-1031/TP)

Removing the worn out u/s 3 way locking device and providing/fixing the new one in its original postion as per drg. (drawing No FD-1031/TP)

Removing the worn out u/s leg and providing / fixing the new leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg. (drawing No FD-1031/TP)

Taking out of u/s worn out shelf and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg. (drawing No FD-1031/TP)

Removing the worn out paint from internal/external surface of almirah steel large by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge. (drawing No FD-1031/TP)

Chair Computer Revolving/Chair Executive Revolving/Chair Revolving High back :- Removing of existing unsv seat & back assembly of chair computer and supply and fixing new seat & back assembly of chair computer and making functional. Seat & back shall be made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. The back foam shall be designed with centour Lumber support for extra comfort with PVC lipping all around.

Removing of existing unsv pedestal assembly and supply and fixing new pedestal assembly injection moulded in black 30% glass filled nylon 10.5 mm dia forged bright Zinc plated MS Caster Pin is of press fitted to each providing for holding the castors. It is 600 mm pitch centre dia and macking functional.

Removing of existing unsv Arm assembly and supply and fixing new arm assembly made of black integral skin polyurethene Re-inforced with MS insert. It shall be scratch and weather resistant and making functional.

BookCase 4 Door teel:- Removing of old unserviceable shutter from its existing position of book case steel and replace the same with new shutter as shown on drawing or directed by Engineer-in-charge

Removing of old unserviceable shutter glass from its existing position of book case steel and replace the same with new shutter glass as shown on drawing or directed by Engineer-in-charge.

Removing of old unserviceable handle from its existing position of book case steel and replace the same with new handle as shown on drawing or directed by Engineer-in-charge.

Removing of old unserviceable lock from its existing position of book case steel and replace the same with new lock 6 lever brass all as shown on drawing or directed by Engineer-in-charge. (Make : Godrej/Link as approved)

Table office officer steel :- Removing old broken damaged top of table office officer steel and S/F new top made out of 18/19mm thick prelaminated particle board one side teak veneered with standard PVC edging all around the top..(Drawing No FD-84).

Removing old u/s internal drawer locks from table office officer steel and S/F new internal drawer locks 40mm 4 lever with duplicate keys of approved quality.(Drawing No FD-84).

Removing old broken u/s hard rubber shoes of table office officer steel and S/F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office officer steel complete all as specified and shown on drawing. (Drawing No FD-84).

Removing the worn out paint from internal/external surface of Table office officer steel by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge.(Drawing No FD-84).

Table office clerk steel :-.Removing old broken damaged top of table office clerk steel and S/F new top made out of 18/19mm thick prelaminated particle board one side teak veneered with 19x4mm teak wood beading duly french polished all around the top.(Drawing No FD-34 M).

Removing old u/s internal cupboard/drawer locks from table office clerk steel and S/F new internal locks 40mm 4 lever with duplicate keys of approved quality.(Drawing No FD-34 M).

Removing old broken u/s rubber shoes of table office clerk steel and S/F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office clerk steel (Drawing No FD-34 M).

Removing the worn out paint from internal/external surface of Table office Clerk steel by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge.(Drawing No FD-34 M).

Table Computer :-Removing of old and u/s top of table computer and S& F new top made out of 18/19 mm thick Prelaminated particle board teak veneered finish and provided with beading of teak wood size 19x4mm alround the top fixed with 20mm pannel pin complete all as directed and as shown on drawing.

Removing of old and u/s drawers of table computer and S& F new drawers made out of18/19 mm thick Prelaminated particle board teak veneered finish and 6mm thick ply wood (5 ply) commercial BWR gde complete all as directed and as shown on drawing.

Removing old & u/s knob from drawers of table computer clerk wooden & S/F new CP brass knob 35 mm dia of approved quality complete as directed.

Taking out old U/S legs of table computer and S&F new long legs made out of 1st classs well teak wood complete all as directed and shown on drg.

Charpoy GI Pipe with ply top:- Remove the existing unserviceable Ply wood from Charpoy GI Pipe and making the frame to its original position by tightening etc and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge. (Drawing No FD-220)

Removing the unserviceable/broken check nuts form GI charpoy & supply and fix 6mm thick GI Medium grade check nuts suitable for 32mm dia GI pipe all as specified and shown on drawings (Each check nut will be measured as single unit). (Drawing No FD-220)

Removing the unserviceable broken 3 way GI elbow from GI charpoy and S & F 32 mm dia GI medium grade 3 way elbow ISI marked all as specified and shown on drg and directed by Engr-in-Charge (Each GI Elbow shall be measured as single unit).(Drawing No FD-220)

Removing the existing unserviceable/broken long rail from GI charpoy and S & F new long rail of GI tubing 32mm including cutting, threading and bringing the GI charpoy into the original shape as shown on drawing and directed by Engr-in- Charge. (Make: TATA/JINDAL). (Drawing No FD-220)

Making short rails obtained from item No 8.04 above and fixing all as shown on drawing. (Drawing No FD-220)

Making legs out of unserviceable long/short rails obtained from item 8.04 and 8.05 above including cutting, threading and fixing all as specified and directed by Engr-in-Charge.(Drawing No FD-220)

M/S Subhadip Enterprise (BID ID -3148844)

M/S AMARNATH AGARWALLA (BID ID -3148465)

M/S New Builders Corporation (BID ID -3148346)