GE/PNH-55/2019-20

Amount

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed

Excavating in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil complete all as specified and directed

PCC 1:3:6, type C2, using 40mm graded stone aggregate in foundation of post holes complete all as specified and directed

Rolled mild steel work as in tubular trusses, including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 complete all as specified & directed.

0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' or 'J' type or cranked hook bolts and washers in roofs, wall etc with grade of zinc coating 275, complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description not other wise described exc.10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Hardcore of broken stone or boulders of gauge exc. 63mm but n exc 100mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Plain cement concrete 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

100 mm thick PCC, type B-1, M-20 using 20mm graded crushed stone aggregate as in flooring complete all as specified and directed.

Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point, in any type of soil complete all as specified and directed.

LT AB cable of size 4x50 + 1 x 16 sqmm ( phase for security light) twisted around the bare messenger of 1x35 sqmm , made out of aluminium stranded circular compacted conductor, XLPE aluminium power cable all as per IS : 14255, IS 398 part-IV 7098 part-I including suspension clamp with eye hook at every 35 to 40 mtr span mounted on pole by means of MS clamp & PG clamp of suitable size for connection of service cable and street light complete all specified and directed. Make: Finolex / KEI Industries Pvt Ltd / Polycab / Gloster / Universal Cables.

Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in Hard/dense soil complete all as specified and directed.

All as per Serial item No. 12.00 above but depth exc. 1.5 mtr but n. exc 3.0 m

Plain cement concrete 1:3:6 (nominal mix) type C-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

Providing, cement concrete 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified

Returning, filling in surplus spoil including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed

Supplying, installation and errection in true vertical position steel tubular swaged welded pole, 9.0 metre long, conforming to IS-2713 part-II, type 410 SP-31, complete with cast iron/MS base plate 6mm thick and of size 300x300mm, finial taper, pole cap, bolts, nuts, washers & screws etc., pole made out of ERW Mild steel tubing tubing including holes of required Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint on exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting three signal red colour bands at lower portion of exposed pole starting from plinth block , each band of 300mm height at 300mm spacing, painting pole No with black paint by stenciled letters/figures of 8cm height, fixed as in repairs complete all as specified and directed. Make : QUALITY STEEL / SURJIT STEEL INDUSTRIES / SOHAN LAL & SONS / ANIL ENGG CORPORATION / ZAIN INDUSTRIES SRINAGAR / ADVANCE TUBE JAMMU Note: Excavation, earth work and PCC in foundation of poles, coping etc shall be measured and paid separately in respected items.

Earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6.0 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6 mm size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 8 mm dia TMT bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified. NOTE: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point.

Dismantling of ACSR conductors and removing from the site complete all as directed.

Dismantling Cross arms, bracings, supports, clamps complete complete all specified and as directed.

Painting to poles including cross arms, 'V' brackets, 'D' clamps, nuts, bolts, complete including painting with five strips of 30cm each black and white paint in alternate strips from the base of pole upto 1.5mtr height complete, spray painting with two coats of synthetic enamel paint of first quality silver paint over a coat of red oxide primer after and including complete removal of old paint by scratching, rubbing complete all as specified and directed.

Trimming tree branches coming in proximity to LT over head lines and involved with over head lines where detected , over head lines to be cleared off tree brances atleast 2.5 Mtrs apart from ACSR conductor from all sides all as directed. (Contactor shall arrange long wooden ladder atleast 32 feet height, rope and handsaw machine to clear the lines from tree branches having girth upto 6" dia at his own arrangement and cost. Unit rates quoted against this item shall deemed to include this aspect).

Energy efficient LED street light fittings, 45 Watt, die-cast aluminium body with power LED and dirver, heat resistance toughened glass IP66 protection including all connection complete, all as specified and directed. Make: HAVELLS(Cat No: ENDURA PEARL NEO ) or equivalent to BAJAJ/ Crompton Greaves / PHILIPS.

Deduct credit for demolished/dismantled materials as listed in Schedule of credit.

M/S Farooq Ahmed Bhat

M/S MANHAS ENTERPRISES