REPAIR AND MAINT TO PLUMBING PLASTERING TILING WORK KOTA STONE AND OTHER CONNECTED WORKS UNDER AGE B/R-I AT ND MBI UNDER GE (NW) KUNJALI, COLABA, MUMBAI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for coloured glazed ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles n exc 0.18 Sqm laid on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour 10mm thick double charged vitrified ceramic tiles, premium quality of approved colour (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors laid over and including 20mm thick screed bed or bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour 10mm thick double charged vitrified ceramic tiles, premium quality of approved colour (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm), as in vertical surfaces such as skirting/dado etc., laid over and including 10mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & labour for applying 3mm thick APP membrane of weighing not less than 3kg/ Sqm reinforced with polyster non woven fabric of not less than 150 gms/sqm) laid on primed surface by torch application method complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparing surfaces and apply evenly a tack coat of industrial bitumen 85/25 grade at the rate of 1.2 kg per sqm complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for PCC 1: 7:12 type F2 (using 40 graded coarse stone aggregate) as in filling in sunken floors complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for 100 mm thick PCC 1:3:6 type C-2 (using 40 graded coarse stone aggregate) as in sub base for sunken slab/ floor complete all as specified mixed with WPC @ 3% by weight of cement and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note- WPC shall be measured and paid separately.

Material & Labour for 20 mm thick plaster in cement mortar 1:3 mixed with liquid water proofing compound FOSROC complast 421 IC @ 130 ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for sunken slab/floor complete all as specified and as directed . Note- i) Liquid water proofing Compound shall be measured and paid separately . ii) Ponding test including supply of water for 72 hours after completion of water proofing work (Item No 6.00 to 10.00 above) to the satisfaction of GE and record shall be submitted duly signed. iii) The laying of membrane shall be got done through an authorised applicator of manufacturer of the membrane.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Material & Labour for 20 mm thick maching cut Granite slab (table rubbed and polished) as in steps, jambs, pillars, window- cills, cooking platforms, working table and like laid over and including 20 mm thick screed bed in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Material & Labour for 20 mm thick maching cut granite slab as in vertical surfaces i.e skirting, dasdo, jambs , risers and pillars etc , laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of stone complete all as specified.

Material & Labour for cleaning the marble/ granite/ kota stone/ stone work/ Mosaic tiles surface and treating with beeswax polish to give high gloss finish complete all as specified.

Material & labour for cement concrete tiles 250 mm x 250 mm x 22 mm thick, with grey cement and no pigment, machine pressed; set, jointed and pointed in neat cement slurry laid over and including 15 mm thick screed bed or bedding layer in cm (1:3), and cut and polished as specified in SSR Part I complete all as specified.

Material and Labour for machine pressed cheqered cement concrete tiles of size 300mm x 300mm x 25mm thick mixed with grey cement and pigment laid in floor over and including 20mm thick screed bed in CM 1:6 set and jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engineer -in-Charge.

Material & labour for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

Material & Labour for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing as specified in SSR Part I complete all as specified.

Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards, false ceiling, wall panneling & partation boards bonded wool, blanket slab including aluminium grid frame work complete all as specified and as directed

Material & Labour for Anodised aluminium snap grid frame work for false ceiling of grid size 605mm x 605 mm fixed with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including 600 mm x 600mm x 6mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre fixed in aluminium grid complete all as specified and as specified.

Material & labour for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old unserviceable false ceiling complete all as specified and directed.

Taking down chowkat with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4 Sqm each.

Taking down chowkat with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each

Supply & fixing powder coated aluminium sections for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, cleats etc including all accessories such as glazing clips, handles, tower bolts, rollers rubber beadings for fixing glass panes in frame including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specified Note: - (i) Glass panes will be measured & paid separately. (ii) The rate quoted shall be inclusive of neoprene beading, glazing clips, screws, etc. as required but shall not be measured for arriving of weight. (iii) Minimum thickness of powder coating shall be 25 micron. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel around contacting surface of aluminium work with matching existing area. (v) The size of aluminium sections shall be as per HQ CE(N) MZ TD drawing No TD/2021/01 to 05 and sill to be provided as per HQ CE(N) MZ TD of sill type 'A' and 'B' respectively if directed.

Supply & fixing 5 mm thick sheet glass ordinary quality, ground or obscured or frosted, on one side and glazing in squares n.exc 0.5 Sqm in each pane and fixed to aluminium windows/shutters with rubber gasket complete all as specified and as directed.

Supply & Fixing in repair aluminum anodised grill, Deco grill DG 103 of 7.5 mm thick fixed with and including 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows as per manufacturers instructions and directed by Engr-in-charge.

Supply & Fixing in repairs 12 mm thick pre-laminated Medium Density board,both side decorative lamination, interior grade,fixed in aluminium/ wooden frame work complete all as specified and as directed..

Supply & Fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4mm and fixed with stainless steel wire staples complete all as specified

Supply & Fixing in repairs 4 mm thick bakelite sheet with decorative choice laminated on both sides complete all as specified and as directed

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Material & Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar (1:6) and finished even and smooth with and including 1 mm thick sagol including necessary scaffolding and safety measures to carrying out works up to 1 to 4 storeys buildings complete all as specified

Material & labour for rendering 10 mm thick on fair faces of concrete surfaces in ceiling in CM (1:3) and finished even and smooth without using extra cement completed all as specified.

Material & Labour for rendering 15 mm thick in CM (1:4) mixed with WPC @ 3% by weight of cement on external surface of wall including necessary scaffolding and safety measures to carrying out works up to 1 to 4 storeys buildings complete all as specified. Note- Water proofing compound will be measured and paid for separately.

Material & Labour for applying one coat of smart care Hydrolock by brush without dilution on plastered surfaces including submitting 3 years warranty against dampness and efflorescence in writing complete all as manufacturers instructions and as directed by Engr-in-Charge.

Supply only integral water profing compound .

Material & Labour for rendering 15 mm thick pre polymer modified ready mixed cement based plaster in two coats 10 mm thick base coat and 5 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior damaged and concrete/masonary surfaces including two legged MS pipe scaffolding and safety measures complete all as specified and directed.

Material & Labour for preparation of new platered wall surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint @ 1.67 lit/10 Sqm over and including priming coat @ 2.20kg/10 Sqm) on wall/roof including necessary scaffolding and safety measures to carrying out works up to 1 to 4 storeys buildings complete all as specified

Material & labour for preparing new plastered surfaces of wall, applying one coat of wall care putty not less than 3mm thickness and making the surface even and smooth using emery paper and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.

Material & Labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

Material & Labour for preparation of old decorated surfaces of wall of any description & applying one coat of acrylic (antifungal) exterior grade paint @ 1.67 lit/10 Sqm over and including priming coat @ 2.20kg/10 Sqm) on wall/roof including necessary scaffolding and safety measures to carrying out works up to 1 to 4 storeys buildings complete all as specified

Material & Labour for preparation of old decorated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint @ 1.67 lit/10 Sqm over and including priming coat @ 2.20kg/10 Sqm) on wall/roof including necessary scaffolding and safety measures to carrying out works up to 1 to 4 storeys buildings complete all as specified

Material & Labour for preparation of old decorated surfaces of ceiling and applying one coat of oil bound distemper complete all as specified

Material & Labour for preparation of old decorated surfaces of any description & applying one coat of oil bound distemper on wall/roof including necessary scaffolding complete all as specified and directed.

Material & labour for complete removal of existing treatment including washing, rubbing down and stopping of distempered and painted wall surfaces, filling holes and cracks with filling putty on wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.

Erection & dismantling of MS tubular double scaffolding (H frames) upto ht of 30 m & with necessary brassing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloth upto top of the scaffolding for carring out external facework of walls all as directed by Engr-in-Charge.

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks complete all as specified and as directed

Supply & Fixing 160mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified.

Supply & Fixing 160mm dia bore PVC (SWR) bends any radius fixed with rubber ring joints complete all as specified and as directed

Supply & Fixing 110mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified.

Supply & Fixing 75mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified.

Supply & Fixing 110 mm bore PVC (SWR) bends any radius fixed with rubber ring joints complete all as specified and as directed

Supply & Fixing 75 mm bore PVC (SWR) bends any radius fixed with rubber ring joints complete all as specified and as directed

Supply & Fixing in repair cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1, diameter of outlet 75mm bore complete all as specified and directed by Engr-in-Charge .

Supply & Fixing in repair cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1, diameter of outlet 100mm bore complete all as specified and directed by Engr-in-Charge .

Supply & fixing 15 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings or laid in floors with suitable size GI clamps including taking down old GI tubing including fittings complete all as specified.

Supply & fixing 20 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings or laid in floors with suitable size GI clamps including taking down old GI tubing including fittings complete all as specified.

Supply & Fixing in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , fixing with automatic flushing system with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed .

Supply & Fixing in repairs vitreous china urinals, bowl type (back or corner wall type) complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisterns with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed .

Supply & Fixing in repairs 32mm dia PVC waste pipe for WHB and urinals complete all as specified and directed.

Supply & fixing in repairs 15 mm bore bib tap, cast copper alloy chromium plated fancy type with long shank and crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified.

Supply & fixing in repairs vitreous china wash hand basin white of size 550 x 400 mm flat back including cutting for and pinning in ends of brackets including brackets including providing 32 mm dia brass CP waste coupling and brass chromium plated bottle trap 32mm bore and making all connections complete all as specified.

Supply & fixing in repairs 15 mm bore pillar taps cast copper alloy,chromium plated fancy type with capstan heads screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly nuts screwed for iron pipe or brass ferrule complete all as specified.

Supply & Fixing in repairs vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding complete all as specified and directed.

Supply & fixing in repairs vitreous china wash down water closet pan (Padestal pattern) white, including 'P' or S trap and making all connections complete all as specified.

Supply & Fixing in repair plastic water closet seat for pedestal pan, black or white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodised hinging device complete all as specified and directed.

Supply & Fixing in repairs 10 litre capacity PVC valveless syphonic action type complete with inlet, ball valve, float and handle including cast iron bracket and connecting to WC complete all as specified.

Supply & Fixing in repairs brass Chromium Plated towel rail, 20mm dia, D type , 60 cm long between flanges complete all as specified.

Supply & Fixing in repairs toilet paper holder of viterous china box type white coloured fixed to walls with chromium plated brass screws complete all as specified and directed.

Supply & Fixing in repairs brass CP shower rose 125mm size complete all as specified and directed.

Supply & Fixing in repairs sinks with drainage bard made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwar wall or including fxing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

Supply & fixing in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm.

Taking down shutters of any description exc 1 Sqm but nexc 2 sqm each complete all as specified and directed.

Supply & Fixing Ist class hard wood (Teak) glazed and skelton window shutter 30 mm thick divided into squares with plain chamfered or rounded mitred and rebated sash bars with edges of shah bars and frame moulded, fitted with cut and mitred beeds for screwing glass/guage etc size of members of shutters as specified in SSR Part-I Section 8.20 (b) complete all as specified and directed.

Supply & Fixing 35mm thick second class hard wood, plain framed, paneled shutter of 9mm BWP comercial ply or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treated .

Supply & Fixing Ist class hard wood (Teak) plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

Material & Labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Supply & Fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification and drawings shown in SSR Part II complete all as specified and as directed by Engr-in-Charge.

Supply & fixing 30 mm thick factory made solid panel PVC door shutter (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & manufacturers instructions.

Supply & Fixing mild steel flat iron 25 x 3 mm as in hold fast or similar small articles conforming to Fe- 410-0 or 310-0.

Supply & Fixing 100 mm Butt hinges, mild steel, with mild steel hinge pin, bright polished and fixed, type B-11

Supply & Fixing 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11

Supply & Fixing in repairs 200mm long aluminium anodized barrel tower bolts of extruded sections ISI marked complete all as specified and directed.

Supply & Fixing 150 mm long aluminium anodized barrel tower bolts of extruded sections ISI marked complete all as specified and directed.

Supply & Fixing in repairs 150 mm long aluminium anodized barrel tower bolts of extruded sections ISI marked complete all as specified and directed.

Supply & Fixing 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy ISI marked complete all as specified and directed.

Supply & Fixing in repairs 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy ISI marked complete all as specified and directed.

Supply & fixing in repairs floor door stopper aluminum alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 140mm complete all as specified.

Supply & Fixing 150mm size extruded aluminium alloy handles, cast type ISI marked complete all as specified and directed.

Supply & Fixing in repairs 150mm size extruded aluminium alloy handles, cast type ISI marked complete all as specified and directed.

Supply & Fixing 100mm size extruded aluminium alloy handles, cast type ISI marked complete all as specified and directed.

Supply & Fixing in repairs 100mm size extruded aluminium alloy handles, cast type ISI marked complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Material & labour for MS framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings etc with ornamental and intricate design conforming to conforming Fe.290.Gde-E-165 complete all as specified

Material & Labour for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (GdeE- 250) quality A complete all as specified and directed.

Material & Labour for mild steel plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment including all necessory drilling, bolting,riveting or welding conforming to Fe 410 -W (Gde E- 250) quality-A complete all as specified.

Material & Labour for preparing new or previously untreated surface of steel of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material & Labour for preparation of old painted steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply & Fixing expanded metal, weight n exc 4.00 Kg per sqm bent to shape required and tying with and including annealed mild steel wire not less than 0.90 mm dia or fixing with galvanised steel staples suplied and fixed complete to wood or steel members, complete all as specifed.

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Material & Labour for brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed

Material & Labour for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction.

Supply & Fixing Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

Supply & Fixing in repairs Push type taps for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm dia iron pipe or for brass ferrule complete all as specified.

Supply and fixing health faucet with flexible pipe (ABS Body) with 1.25 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook fixed to 15mm bore stop cock and wall hook complete all as specified and directed.

Supply & Fixing in repairs 12mm thick, toughened glass for door, shutters, partitions, automatic doors etccut to shape, drilling holes with and including fitting and fixtures such as SS handles, SS studs, SS fittings for door, SS pivots etc complete all as specified and directed by Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge or thickness including Nainital or similar pattern roof coverings all as specified and directed.

Supply & Fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified

Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based Plain/design steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified

Material & Labour for 1.5 mm thick galvanised steel sheet as in facia of roof, window chajja and Valley gutters fixed with rivets or other suitable arrangements over MS brackets in any shape/design as required profile with desired slope, including cutting holes, make design etc complete all as specified

Supply & Fixing 2mm fibre glass reinforced translucent plain/corrugated sheeting with two corrugation side lap fixed with L -type or J-type or cranked hook in lieu of screw as in roof, wall etc complete all as specified.

Supply & Fixing in repairs Roller venetion blinds made out of special fabric to resist dust and water of approved texture by GE with necessary accessories complete all as directed.

Material & labour for Solid PVC Wall Lining/panelling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing shown in SSR Part I and as per manufacturers instructions.

Supply & fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing shown in SSR Part I and as per manufacturers instructions..

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of debris out of MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Material & Labour for 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

Sachin santosh dalvi (BID ID -3150631)

SR Construction (BID ID -3153669)

jalandhara construction (BID ID -3151518)

RAJENDRA CONSTRUCTION (BID ID -3153260)

SHREE JAGDISH FURNITURE CO. (BID ID -3151561)