Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹2.2 L
Closing Date
17 May 2021, 4:00 pmClosed
Executive Engineer PWD R and B Division Kathua
Executive Engineer PWD R and B Division Kathua
BOQ
2021_PWDJK_124095_1
e-NIT No. 26 of 2021-22/1660-68/G dt 08-05-2021
Open Tender
Civil Works - Roads
Item Wise
30 days
Kathua
NIT
6 documents required · 6 mandatory
₹600
Executive Engineer PWD R and B Division Kathua
Exempted
31 May 2021
10 May 2021
18 May 2021
10 May 2021
17 May 2021
10 May 2021
Amount
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to Wet Mix Macadam (W M M) specification incl. premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density complete as per specifications & directions of Engineer-in-Charge.
Providing & applying tack coat using hot straight run bitumen of grade –VG-10, incl. heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning & preparing the existing road surface as per specifications on W.B.M. @ 0.75 Kg/sqm.
2.5 cm premix carpet surfacing with 2.25cum and 1.12 cum of stonechippings of 13.2 mm and 11.2mm size respectively per 100 sqm and 52kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). With paving Asphalt grade VG-10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt.
Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.
M/S PARSHOTAM KUMAR
RAHUL SHARMA GOVT CONTRACTOR
M/S RAJESH KUMAR
Ganesh Dutt Sharma
DANVEER SINGH ANDOTRA
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .