Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹42.1 L+₹25,759.30 (0.62%)Rejected-AOC SITE NO 29 30 1ST CROSS NAGAPPA REDDY LAYOUT KAGGADASAPURA CV RAMAN NAGAR PO BANGALORE 560 093 | BANGALORE | BANGALORE | KARNATAKA | 560093 | L2 | Rejected-AOC NOT LOWEST |
Tender Value
₹42.5 L
EMD Value
₹85,000
Closing Date
30 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE ARMY BANGALORE
HQ CWE ARMY BANGALORE 101 Dickenson Road Bangalore 560042
PROVISION OF SQUAD POSTS UNDER GE (NORTH) BANGALORE
2024_MES_648045_1
86267/E8
Open Tender
Civil Works
Item Rate
120 days
GE (NORTH) BANGALORE
As per NIT
8 documents required · 8 mandatory
₹500
GE(North) Bangalore
₹85,000
Yes
21 May 2024
27 Mar 2024
2 May 2024
27 Mar 2024
30 Apr 2024
11 Apr 2024
27 Mar 2024 - 4 Apr 2024
Amount
Surface dressing not exceeding 15 cm deep and getting out Hard/Dense soil complete all as specified and as directed.
Removing excavated material exceeding 1.50 km but not exceeding 5 km and depositing complete all as specified and as directed.
Material and Labour for Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out Hard/Dense Soil complete all as specified and as directed.
All the items as per item 1.003 herein before but for depth exceeding 1.50m but not exceeding 3.0m complete all as specified and as directed.
Material and Labour for Cement concrete in foundations, filling and mass concrete type D-2, and 1:4:8 (40mm graded aggregate) complete all as specified and as directed.
Material and Labour for Reinforced cement concrete (design mix M-25 grade using 20mm graded stone aggregate) in Foundations footings, plinth beams, bases for columns, etc and mass concrete complete all as specified and as directed.
Material and Labour for Reinforced cement concrete (design mix M-25 grade using 20mm graded stone aggregate) above top of footings including attached pilasters and buttresses complete all as specified and as directed.
Material and Labour for Reinforced cement concrete (design mix M-25 grade using 20mm graded stone aggregate) Columns, pillars, piers, posts and struts complete all as specified and as directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.
Material and Labour for Formwork flat to sides of concrete foundations, footings, bases of columns, and plinth beams and similar work vertical or to batter complete all as specified and as directed.
Material and Labour for Formwork flat to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.
Material and Labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per item No 1.012 hereinbefore but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
Material and Labour for pre-cast cement concrete masonary in PCC 1:3:6 type C1 using 20mm graded aggregate with solid block, exceeding 10cm in width setting in CM 1:6 complete all as specified and as directed.
Material and Labour for rendering 15mm thick cement plaster in CM 1 :4 on concrete surfaces of roof slab and parapets mixed with WPC @ 4ml per kg by weight of cement shall be carried out all as specified and directed by the Engineer-in-Charge ( WPC shall be measured and paid separately) complete all as specified and as directed.
Supply only Liquid water proofing compound
Material and Labour for Filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
Material and Labour for Hardcore of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 10cm thick, watered and rammed to a true surface complete all as specified and as directed.
Material and Labour for 100mm thick PCC, 1:4:8 Type D-2 using 40mm graded stone aggregate complete all as specified and as directed.
Material and Labour for Cement concrete 40mm thick type B-1, 1:2:4 (20mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.
Material and Labour for Three coats of white wash on internal wall surfaces including preparations above skirting/Dado complete all as specified and as directed.
Supply and Fixing of Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment Fe-410- W(Gde-E-250) quality-B complete all as specified and as directed.
Supply and Fixing of steel work in Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc Fe-410- W(Gde-E-250) quality-B complete all as specified and as directed.
Supply and Fixing of steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-290 Gde E-165 complete all as specified and as directed.
Preparation of new or previously untreated steel surfaces & applying a two coats of synthetic enamel paint over a coat of red oxide primer over 10cm in width or girth, not otherwise described complete all as specified and as directed.
Supply and Fixing of wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
Supply and Fixing of Pre- painted galvalume aluminum zinc coating GI based corrugated Curved steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Supply and Fixing of Pre-painted galvalum aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Material and Labour for PCC 1:3:6, type C2, (Using 40 mm graded stone aggregate), 100mm thick as in plinth protection/Sub base flooring, finishing surface fair and even, in panels & filling joints with mortar, etc., complete all as specified and directed.
Excavating over areas not exc 1.50m deep and getting out in Hard/Dense soil complete all as specified and as directed.
Removing excavated material exc. 250 m but not exc 500 m and depositing where directed
Material and Labour for preparing new or previously untreated brick, stone, concrete, asbestos cement or plastered surfaces of any description over 10cm girth or width, not otherwise described and over a coat of priming paint plaster coat complete all as specified and as directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete complete all as specified and as directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in foot path, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.
Wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metallic rigid PVC conduit medium grade ISI marked incl accessories incl GI/ MS branded sunken boxes of suitable module concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for the following :-(a)One light point controlled by one switch . Note for Item No 2.001 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring.
(b) All as per item No 2.001 herein before but One 3 pin socket out let 5 A on same board
Supply and Fixing of LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing & integrated LED channel rectangular white acrylic cover complete with all accessories all as specified and directed. Make: Bajaj, Cat No.BCLAB 20 WH LED P or or equivalent make specified in P.S
Supply and fix Modular switch 1 way 6A, 1 module all as specified and directed.
Supply and fix Modular Socket, 6A - 2/3 pin combined 2 module all as specified and as directed.
Supply and Fixing of MCB SPN 240 volts 32 Amps complete all as specified and as directed.
Supply and Fixing of MCB single pole 240 volts 6 to 32 Amps complete all as specified and as directed
Supply and Fixing of MCB DB SPN 4 way double door type 240 volts with 200 Amps rated bus bar as specified and as directed.
Supply and Fixing of ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed.
Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 metre connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil plain cement concrete (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed.
Material and labour for sand cushioning with a layer of M sand 23 cm thick under and above the cable complete all as specified and as directed. Note: Punned thickness will be measured for payment.
Supply and Laying of sub class burnt bricks for cable protection complete all as specified and as directed.
Supply and Laying of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 35 Sqmm, 3.50 core laid in trenches/wall complete all as specified and as directed.
Supply and Laying of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 10 Sqmm, 2 core laid in trenches/wall complete all as specified and as directed.
Supply and Fixing of GI tubing light grade 32 mm bore with all fitting laid in trenches/walls/Roads for cable protection complete all as specified and as directed.
Supply and Fixing MCCB TPN 415 Volts, 16 KA 'C" curve 100 Amps complete all as specified and as directed.
B5BUILDING SOLUTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .