Construction of Health Institution Level-II at New Shimla District Shimla. (SH- Construction of Building portion, WS and SI, Rain harvesting tank and Site development etc.)

Amount

EARTH WORK: Cutting in earth work by mechanical means or manual means in all heights and depths in all kinds of soil, including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiesling and wedging out of rocks (where blasting is prohabited) and their intermediate classification of soil including dewatering whereever required,settling out to required lines,levels as shown on the drawing and directed by the Engineer in charge at site according to the HP.PWD specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful materials to be stacked at suitable site as per satisfication of Engineer -in- Charge along with levelling fine dressing andwith all kinds of labour , mechanical tools and equipment and safety measures and incidental necessary to complete the work by mechanical means and labour (if required). All useful materialsuch as stones, shingles, aggregate,sand slates shall be properlystacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per the direction of the Engineer-in-Charge and all surplus excavated earth will be disposed off at approved dumping site which will be arranged by the contractor at his own cost. Any loss to thepublic and private property during the course of execution and disposal of serviceableand unserviceable materials shall betheabsoluteresponsiblity of the contractor and shall have to be dully compensated by him in all respectsincluding all incidental charges.

Excavation in earth work etc. in all heights and depth etc. in all kinds of soils including , saturated soil comprising of ,pick work, jumper work, blasting work both in soft and hard rock with chiselling and wedging outof rock ( where blasting is prohibted) and there intermediate classification of soils including dewatering whereever required, setting out to required lines, levells as shown on the drawing and direted by the Engineer-in-Charge at site, according to the PWD specification of 1990 ( One thousand nine hundered ninety) volume-I ( one) and sorting out useful as per satisfication of Engineer-in- Charge along with levelling fine dressing and with all kinds of labour , machineries, tool equipments and safety measures and incidents necessary to complete the work by mechanical means and labour (if required). All useful materialsuch as stones, shingles, aggregatesand slates shall be properlystacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per the direction of the Engineer-in-Charge. and all surplus excavated earth will be disposed off at approved dumping site which will be arranged by the contractor at his own cost. Any loss to thepublic and private property during the course of execution and disposal of serviceableand unserviceable materials shall betheabsoluteresponsiblity of the contractor and shall have to be dully compensated by him in all respectsincluding all incidental charges.

Excavation in drains and channels etc; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturator soil including chiseling or any other mixed variety of soil, lift upto any heights within all leads, lifts of materials and other incidentals and all surplus excavated earth will be disposed off at approved dumping site which will be arranged by the contractor at his own cost.

Excavation in foundation and trenches in earth work . in all heights and depth etc. in all kinds of soils including , saturated soil comprising of ,pick work, jumper work, blasting work both in soft and hard rock with chiselling and wedging outof rock ( where blasting is prohibted) and there intermediate classification of soils including dewatering whereever required, setting out to required lines, levells as shown on the drawing and direted by the Engineer-in-Charge at site, according to the PWD specification of 1990 ( One thousand nine hundered ninety) volume-I ( one) and sorting out useful and unuseful materials and transportation of the useful materials for disposing at dumping site ( to be arranged by the contractor) as per satisfication of Engineer-in- Charge through all modes of transportations including head load, animal load or mechanical means along with levelling fine dressing and with all kinds of labour , machineries, tool equipments and safety measures and incidents necessary to complete the work by mechanical means and labour (if required). All useful materialsuch as stones, shingles, aggregatesand slates shall be properlystacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per the direction of the Engineer-in-Charge. and all surplus excavated earth will be disposed off at approved dumping site which will be arranged by the contractor at his own cost. Any loss to the public and private property during the course of execution and disposal of serviceableand unserviceable materials shall be the absolute responsiblity of the contractor and shall have to be dully compensated by him in all respectsincluding all incidental charges.

Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete within all leads, lifts of materials and other incidentals.

FORM WORK: Providing form work with steel plates of 3.15mm (Three decimal One five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials in all leads and lifts. & at all floorlevels:-Foundation footing and basis of columns, etc. and mass concrete.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like :-Floor etc. upto 200mm in thickness

Vertical surfaces such as wall (any thickness) partition and the like including attached pillasters, buttresses plinth and string courses and the like :-

Columns, pillars, posts and struts :- Square rectangular or polygonal in plan

Stair cases with sloping or stepped soffits excluding landing :-

Beams, cantilever, girders and lintels :- Sides and soffits of beams, beam haunching cantilevers, brssumers and lintels not exceeding 1 metre in depth in all heights from floor

Edges of slabs and break in floors and walls :-Under 20cm wide :-

CONCRETE WORK:- Providing and laying cement concrete 1:6:12 (One cement: Six sand: Twelve graded broken/ crushed stone aggregate 40mm(forty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth, within all leads, lifts of materials and other incidentals.

Providing and laying cement concrete 1:8:16(One cement :eight sand :sixteen graded cursed/broken stone aggregate 40mm) (forty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth, within all leads, lifts of materials and other incidentals.

Providing and laying cement concrete 1:4:8(One cement Four sand :Eight graded cursed/broken stone aggregate 40mm) (forty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth, within all leads, lifts of materials and other incidentals.

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 Graded stone aggregate 20mm nominal size) Mechanically mixed and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc. including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

RCC WORK:- Providing and laying cement concrete work 1:1½:3 (1 cement : 1½ sand : 3 graded stone aggregate 20 mm nominal size) michamically mixed and vibrated for compacting concrete and curing complete excluding cost of form work and reinforcement for reinforced concrete work,but including carriage of materials in all leads and lifts and for all floor levels:- Foundation, footing, bases of columns and the like and mass concrete.

Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever.

Columns, pillars, posts and struts :-

Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing :-

Providing and laying upto all floor levels cement concrete work 1:1½:3 (1 cement : 1½ sand : 3 graded stone aggregate 20 mm nominal size) to give smooth and even surface including centring and shuttering but excluding cost of reinforcement and curing complete mechanical mixed and vibrated for compecting reinforced concrete including carriage of materials in all leads and lifts and for all floor levels:- Moulding as in cornices, window sills etc. not exceeding 15cm in girth.

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1cement :2 sand :4 stone aggregate 12.5 mm nominal size) and curing complete including carriage of material in all leads and lifts.

Applying a coat of hot bitumen (mexphalt 80/100 or equivalent) using 1.70 kg. per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil. including carriage of material in all leads and lifts

Applying cement slurry on RCC slab or cement concrete work using 2.75 kg of cement per squaremetre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of materials within all leads and lifts :-.

Providing Tor steel reinforcement for Reinforced Cement Concrete work upto all floor levells including bending, binding and placing in position complete including cost of binding wires completed and other incidentals due for its completion for all floors, within all leads and lifts of materials and other incidentals and for all floor levels.

BRICK WORK:- Brick work using second class common burnt clay building bricks in above plinth level up to all floor levels in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts upto all floor levels :-

Brick work using second class common burnt clay building bricks foundation and plinth level in cement mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads and lifts upto all floor levels :-

Half brick masonary in second class common burnt clay building bricks in superstructure upto all floor levels in cement mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads and lifts :- Second class brick upto all floor levels.

STONE MASONRY:- Stone filling behind retaining walls as per Hppwd specification 1990 volume- I and as per direction of the Engineer-in- Charge incuding carriage of materials in all leads and lifts.

Randam rubble masonary ( un coursed/ brought to coursed) with hard stones of approved quality including levelling with cement concrete 1:6:12 ( 1 cement : 6 sand :12 stone agregate 40 mm nominal size) in cement mortor 1:6 (1 cement :6 sand)in foundation and plinth including rakingout joints Including carriage of material within all leads and lifts & all heights as per direction of Engineer-in-charge.

Square rubble masonry coursed with hard stone of approved quality in foundation and plinth or above plinth level In cement mortar 1:6 ( 1 cement : 6 sand) including carriage of material within all leads and lifts & all heights as per direction of Engineer-in-charge.

Boulder filling dry hand packed under floors including watering, ramming, consolidating and dreesing complete including carriage of material within all leads and lifts & all heights as per direction of Engineer-in-charge.

Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of materials within all leads and lifts.

Supplying and filling brocken/crushed stone aggregate chipping of hard stone of 40 mm size

WOOD WORK:-Providing and fixing Alstone tiles in ceiling of size 60x60 CM and required thickness and of approved shade over main beam T-section frame fixed/ hangingwith wall or ceiling etc. with specified clamp and G.I. wire and rawl plugs etc. complete as per Arch.Drg/detail including carriage of materials within all leads and lifts :-

Providing and fixing E- board ceiling upto height of floor level with angle iron size 25 x25 mm and T- Section 25 x 25 mm as per Arch.detail Drg. Complete including carriage of materials.

Providing and fixing 12mm thick 150mm wide pelment with 25mm diamtre wooden curtain ,rods and brackets in cluding fixing 25x3mm M.S. flat at 10 cm long and plugs etc. complete. 1st. Class Indian Teak wood

Providing and fixing 75 mm x 65 mm rounded hand rails in straight length complete in 2nd. Class Indian Teak wood.

Providing and fixing aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. completed within all leads, lifts of materials and other incidentals.(i) 300 X 16 mm size

250 X 16 mm size

Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.i) 250 mm x 10 mm

150 mm x 10 mm

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. completed within all leads, lifts of materials and other incidentals.(i) 125 mm size

ii) 100 mm size.

Providing and fixing bright finished brass furniture handelswith necessary screws etc. complete of required shape and size including carruiage within all leads, lifts of materials and other incidentals.

Providing and fixing bright finished brass magnatic catcher with necessary screws etc. complete of required shape and size including carruiage within all leads, lifts of materials and other incidentals.

providing and fixing 65x35 mm special quality chromium plated bright finshed brass cup board locks with six leavers including screws complete ( Indian make) with necessary screws etc. complete of required shape and size including carruiage within all leads, lifts of materials and other incidentals.

Providing and fixing 19 mm thick water proof termite resistant commercial board ISI marked IS No. 1659 of UNIPLY/GREENPLY or its equivalent shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) within all leads, lifts of materials and other incidentals.

Providing and fixing 19 mm thick water proof termite resistant commercial board ISI marked IS No. 1659 of UNIPLY/GREENPLY or its equivalent in shelves / box fixing with screws etc complete) within all leads, lifts of materials and other incidentals.

providing and fixing 1.00 mm thick colouered or plain lamination sheet ( Sunmica) on board/ ply wood sheets with approved adhesiveand nails etc. complete in all respect including carriage of materials in all leads and lifts.

Providing and fixing plain square edged cover fillets beeding 19 x 6mm section including mitring at junction with wooden screws and nails etc. complete including carriage of materials in all leads and lifts:- (i) 1st class Deodar wood

providing and fixing 6.00 mm thick wood ply sheet of approved quality ISI marked in lining with approved adhesive and nails etc. complete in all respect including carriage of materials in all leads and lifts.

Providing & fixing anodised aluminium work for door, window, ventilators & partitions with extruded built up standard tubular & other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom & sides with required PVC/ neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred & jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws, all complete as per architectural drawings & the directions of Engineer-In Charge including carriage of materials within all leads and lifts:- For doors windows and ventilatiors & glazed partitions frames.

For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) including carriage of materials within all leads and lifts.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) glazing with glass panes of 5 mm thickness (weight not less than 13.50 kg/sqm. including carriage of materials within all leads and lifts.

Providing and fixing anodized aluminium grill of required pattern to existing window, ventilator with 80x80 mm panels holeswith 25x8 mm thick aluminium flats in window and ventilators including fixing with aluminium screws or bolts and nuts complete in aluminium channels base frames including carriage of materials within all leads and lifts.

Providing and fixing prelaminated board BWP phenol bonded exterior/ interior grade both sides 12 mm thick including carriage of materials in all leads and lifts.

Providing and fixing stain less steel wire mesh to existing aluminium frame complete as per Architectural drawings and also as per direction of Engineer-in-Charge.

FLOORING: White glazed tiles 6mm thick 300 mm X 450 mm or required size size of Orient / NITCO or equivalent in skirting risers of steps and dado 12mm thick cement mortar 1:3(One cement is to Three Sand) and jointed with cement slurry. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals at for all floor levels

Providing and laying 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of materials within all leads and lifts at for all floor levels for all floor levels.

Providing and laying 50 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of materials within all leads and lifts at for all floor levels for all floor levels.

Kota stone slab 25 mm thick mirror polised / uniform colour flooring 20mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab Including rubbing and polishing complete within all leads and lifts at for all floor levels for all floor levels.

Kota stone slab 20 mm thick mirror polished of slab size not less than 550mmx550mm or required size in risers of steps,skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry fixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of material within all leads and lifts at for all floor levels.

providing and laying ceramic tiles 30 cmx30 cm in flooring of approved shade and pattern of digital series of Somany/ Kazaria/Nitco/ Orient or equivlent brand fixed on walls on 10 mm thick ( average) cement mortar 1:3 ( 1 cement:3 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of tiles complete whereever required including carriage of materials in all leads and lifts.

providing and laying ceramic tiles 30 cmx30 cm or required size as per Architectural drawings in skirting or dado of approved shade and pattern of digital series of Somany/ Kazaria/Nitco/ Orient or equivlent brand fixed on walls on 10 mm thick ( average) cement mortar 1:3 ( 1 cement:3 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of tiles complete whereever required including carriage of materials in all leads and lifts.

Providing and laying Baroda green marble stone with gray streaks in flooring/on walls / kitchen top 20 mm (average) thickness base of cement mortar 1:3 (1 cement :3 sand ) including jointing with cement mortar 1:2 (1white cement :2 marble dust) with an admixture of pigment to match the shade of marble stone including rubbing and polishing complete including carriage of materials in all leads and lifts. I) 20 mm thick.

Making half round nosing to kota stone/ granite stone/ marble complete as per the direction of Engineer - in Charge including carriage of materials within all leads and lifts.

Providing and laying vitrified tiles 300x300mmx10 mm of ORIENT- Bell or its equivalent tiles of approved shade in flooring, treads of steps and landing laid on a bed of 12mm (Twelve mlimetres) thick cement mortar 1:3 (One cement: Three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials in all leads and lifts.

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neatcement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete including carriage of materials in all leads and lifts.(Sub base concrete floor to be paid for separately). i) 60mm thick inter locking blocks

ROOFING: Providing and fixing 0.60mm th. Prepainted steel sheet in roofing with hot dipped metallic zinc coated sheetwith top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks,bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete all accesories as required as per the direction of Engineer- IN- Charge including carriage of materials in all leads and lifts.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick Prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating + back coat polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks,bolts and nuts 6mm dia metre with prepainted G.I. limpet and bitumen washers complete with all accesories as required as per the direction of Engineer- in- Charge including carriage of materials in all leads and lifts.

Providing and fixing valley 90 cm overall with 0.60mm thick Prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating + back coat polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks,bolts and nuts 6mm dia metre with prepainted G.I. limpet and bitumen washers complete with all accesories as required as per the direction of Engineer- IN- Charge including carriage of materials in all leads and lifts.

Providing and fixing flushing 38 cm overall with 0.60mm thick Prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating + back coat polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks,bolts and nuts 6mm dia metre with prepainted G.I. limpet and bitumen washers complete with all accesories as required as per the direction of Engineer- in- Charge including carriage of materials in all leads and lifts.

Providing and fixing 30 cm. wide 30 cm.deep 90 cm overall semicircular plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. i) 0.63 mm thick sheet including carriage of materials in all leads and lifts.

Providing and fixing on walls face PVC (D-Plast) rain water pipes of working preshure of not less then 4.5kg /sqm including filling the joints with approved adhesive complete including carriage of materials in all leads and lifts. i) 150 mmdia pipe

Providing and fixing on walls face PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials in all leads and lifts:-. .

150 mm dia PVC plain bend

150 mm dia PVC shoe

Providing and fixing PVC clamps ISI marked of approved design to PVC. pipes with steel screws and rawal plugs completes including carriage of materials in all leads and lifts. i) 150 mm dia

Providing and fixing M.S. BP Sheet 2.00 mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of materials in all leads and lifts

STEEL WORK:-Steel work welded in built up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials within all leads and lifts :-

In trusses and trussed purlins in buildings.

In gratings, framed, guards, bars ladders and railing, brackets and similar works :-

Providing & fixing in position collapsible steel shutters with vertical channels 20mmx 10mm x 2mm & braced with flat iron diagnols 20mm x 5mm size with top & bottom rails of T iron 40mm x 40mm x 6mm with 38mm dia steel pulley complete with bolts & nuts locking arrangements, stoppers, handles, including applying a priming coat of red lead paint including carriage of materials in all leads and lifts.

Providing and fixing M.S. round holding down or anchor bolts with nuts and washers plates complete including carriage of materials in all leads and lifts.

Providing and fixing moulded hand rail of M.S. hollow pipe 50 mm dia welded in straight length over M.S. flat at top of vertical blusters including one coat of red oxide priming coat complete ( M.S. flat and balusters of railings shall be masured and paid separetly) including carriage of materials in all leads and lifts

PAINTING:Painting two coats (excluding priming coat )on new steel and other metel surfaces under coat with ready mixed paint brushing to give an even shade i/c cleaning the surface all dirt, dust and other foreign matter with ready mixed paint other than white

Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters with enamel paint other than white as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Painting two coats with stain enamel paint of approved design or its equivalent on undecorated wall surfaces to give an even shade including cleaning the surface of all dirt, dust and other foreign matters and sand papering as required with paint complete.

Polishing two coat with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler.

Applying Birla white care putty over plaster surface after throughly brushing the surface free from morter drops.dust, loose materials and other foreign matters sand papering smooth to give final finish to the surface complete.

Finishing wall with water proofing exterior grade emulsion of Asian paint of approved design or its equivalent on undecorated wall surfaces (two coat) to give an even shade and final finishafter throughly cleaning the surface of all dirt, dust and other foreign matters and sand papering Smooth.

Distempering two coats with synthetic/Acrylic washable distemper of approved brand and manufacture and of required shade on undecorated wall to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture oafter thoroughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surfaces even and sand papered smooth.

PLASTERING: 6mm cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand) including carriage of materials in all leads and lifts.

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth ( in Cm 1 : 6 ) including carriage of materials in all leads and lifts.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth including. Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials in all leads and lifts.

20mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth including. Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials in all leads and lifts.

MISCLENIUS: Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand i/c preparation of ground including carriage of materials in all leads and lifts..

Providing plinth protection 50mm thick in cement conc. 1:3:6 (1cement :3 sand:6 graaded stone aggregate 20mm nominal size)including carriage of materials in all leads and lifts.

Constructing Course rubble hammer dressed 'U' shape opensurface drain with side wall. 15x22 cm in cement mortar 1:6(1 Cement : 6 Sand) and inside plastring with cement plaster1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of materials in all leads and lifts.

Providing and Fixing 100 mm dia M.S. pipe embedded in cement conc. Block (30 x 30x 30 ) 1:2:4 complete as per Arch Drg.including carriage of materials in all leads and lifts.

Providing and fixing M.S. Bracket 45x45 Cm. of 50x50 mm M.S. hollow section frame work with 20x20 mm hollow M.S. section and 12 mm solid square bars in combination as per Arch. Drg. Complete including carriage of materials in all leads and lifts..

Supplying and fixing C.I. cover with frame 300x300 mm for gully trap (standard pattern) the weight of cover to be not less than 4.53 kg including carriage of materials in all leads and lifts.

Supplying and fixing C.I. menhole cover with frame 450x610 mm the weight of cover and frame not less than 38 kg including carriage of materials in all leads and lifts.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.i) 110 mm dia. including carriage of materials in all leads and lifts.

WS & SI:- Providing and fixng to wall ceiling floor galvanised mild steel tubes (Medium grade) including Fittings; carriage of materials within all leads and lifts :- 25mm dia

Providing and laying in trenches galvanised mild steel tubes (Medium grade), tube fittings (Earth work in trenches to be measured and paid for separately) including carriage of materials within all leads and lifts 25 mm (twenty five millimetre) nominal bore :-

Making connection of galvanised steel distribution branch with GMS main 20mm to 40mm nominal bore by providing and fixing tee i/c cutting and threading the pipes complete. including carriage of materials within all leads and lifts :-

Fixing water meter stop-cock in GMS tube i/c necessary fittings such as mild steel galvanished jam nut .sockets etc. complete cutting and making long screws (water metre and stop cock to measured and paid for separately) 25mm nominal bore

Providing and fixng Plytheline-Aluminium- Polyehuylene (PE-AL-PE) composite pressure pipe U-V stabilized with carbon black conforming to IS-15450-2004 water supply including clamp at one metre spacing, cutting fixing and making good the walletc. including carriage of material in all leads and lifts.15mm (fifteen millimetre) nominal bore :- 1216

Providing and fixng composite end seal compression fittings as per IS- 15450-2004 including carriage of material in all leads and lifts.Equal Tees 1216

Reducing Tee 1620 x all branches

Female branch Tee 1216x 1216x 15mm thread

Female elbows 1216x15 mm thread

Male thread connector 1216x 15 mm thread

Female thread connector 1216x 15 mm thread

couplers 1216

Reducer 1620 x1216

Providing and Fixing PVC water tank of ISI :-12701 marked,G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting up to all heights above ground level. (make SINTEX having capacity of 1000 liters)

Providing and fixing PVC ISI marked floor trap of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floors including carriage of materials within all leads an lifts.i) 110 mm x 90 mm

ii) 110 mm x 75 mm

Providing and fixing High pressure PVC spigot and socked , waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads an lifts.i) 110mm dia

ii) 75mm dia

Providing and fixing sand cast/cast iron holders bats including steel bolts to sand cast iron/cast (spun) iron pipes embeded in and including cement concrete blocks 100mm X 100 mm X 100 mm of 1:2:4 mixincluding cost of cutting holder and making good the wall 75 mm dia / size pipe

100mm dia / size pipe

Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive complete including carriage of materials within all leads an lifts :110 mm dia-

75 mm dia

Providing and fixing PVC door band with oval access door , insertion rubber washer 3mm thick bolts and nutsISI marked complete including fixing with approved adhesive complete including carriage of materials within all leads an lifts 110 mm dia

75 mm dia

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive complete including carriage of materials within all leads an lifts 75 mm dia

110 mm dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive complete including carriage of materials within all leads an lifts.i) 75 mm dia

ii) 110 mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive complete including carriage of materials within all leads an lifts i) 75 mm dia

ii) 110 mm dia

Providing and fixing PVC offset 45 degree ISI marked including fixing with approved adhesive complete including carriage of materials within all leads an lifts i) 75 mm dia

ii) 100 mm dia

Providing and fixing PVC double equal branch with oval access door , ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive complete including carriage of materials within all leads an lifts i) 75mm dia

ii) 110mm dia

Providing and fixing PVC plain double equal branch ISI marked complete including fixing with approved adhesive complete including carriage of materials within all leads an lifts.i) 75mm dia

ii) 110mm dia

Providing and fixing PVC cowl including carriage of materials within all leads and lifts 75 mm nominal diametre :-:-

110 mm nominal diametre :-

Providing and fixing vitreous china wash down water closet (European type W,C.pan with integral P or S trap if required, including jointing the trap with soil pipe in cement pipe in C.M. 1:1( 1cement :1 sand ) (seat and cover to be measured and paid for separately) European Seat (PRIMA) NO.2061 of CERA/HINDWARE in snow white shade

Providing and fixing plastic seat and cover for wash down water closet white plastic seat and over

Providing and fixing PTMT coloured /white high density polyethylene/ poly propylene 10.00 liters capacity (full flush) European standard control low level flushing cistern.with a pair of C.I. BRACKETS ,With fittings such as lead valve syphon, 15mm nomilal size PVC ball valve with polythene flot ,with push botten, coupling for connection with complete with inlet, outlet and overflow pipes ,40 mm dia C.P. flush bend etc. complete.No. 7231 of Paryag

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and macking good the same but excluding fittings FLAT BACK category No 1012 No 1012 size 550x400

Providing and fixing viterous China bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately) of size 633x395x420 mm with automatic flushing systren with fitting complete. RS or EI brackets painted white No. No. 5001 CERA/ HINDWARE

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings.

P/F CP brass flush pipe separators for urinal with fittings such as unions, clamp etc. i/c cutting holes in walls and making good the same complete 15mm nominal bore

P/F Division plate for urinals 600x300mm vetreous China with fitting complete.category N0 61001 OF CERA

Providing and fixing PVC. 110mm size 'P' or 'S' trap for water closet (squatting pan) including jointing the trap with the pan and and PVC pipe with approved adhesive etc. complete. 110 mm dia.

Providing and fixing C.P. Brass chain 50cm. Long and rubber plug of following sizes for sink or wash basin 32mm dia

Providing and fixing M.I. Union for wash basin or sink including carriage of materials within all leads and lifts 32mm dia :-

Providing and fixing C. P. Brass S Trap for wash basin and sink 32mm dia.

Providing and fixing C.P. Bottle Trap for wash basin or sink including carriage of materials within all leads and lifts .

Providing and fixing C.P. brass waste for wash basin or sink including carriage of materials within all leads and lifts 32 mm dia.

Providing & fixing 32 mm dia, PVC waste pipe for wash basin or sink including check nut including carrage of material within all leads and lifts:-

Providing & fixing 100 mm dia, C.P. grating including carrage of material within all leads and lifts:-

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials within all leads and lifts :-

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts 600 X 20 mm. including carriage of materials within all leads and lifts.

Providing and fixing 600mmx120mm glass shelf with C.P. brass bracket and guard rail complete including carriage of materials within all leads and lifts 15mm dia .,

Providing and fixing C. P. Brass Toilet paper holder.

Providing and fixing C. P. Brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing prayag double bowl Kitchen sink with C.I. OR M.S. brackets painted white i/c cutting holes in walls and making good the same but excluding fitting ISI marked No. 1022-XD-460x560x229 size 460x560x229 mm including carriage of materials within all leads and lifts

Providing and fixing CP brass bib tap with capstan head including carriage of materials within all leads and lifts

Providing and fixing CP brass pillar tap with capstan head including carriage of materials within all leads and lifts .

Providing and fixing C.P.brass angle cock without nuts and pipe including carriage of materials within all leads and lifts .

Providing and fixing PTMT push cock of approved quality and colour ( 20 mm female thread)

Providing and fixing C.P.brass stop cocks including carriage of materials within all leads and lifts 15mm dia .

Providing and fixing PVC connection pipe with brass union including carriage of materials within all leads and lifts 45cms length .

Providing and fixing brass full way valve with wheel including carriage of materials within all leads and lifts 15mm nominal bore .

25 mm nominal bore :-

Providing and fixing 15 mm mixer for kitchen sink with top/ bottom swinging spout

Providing and fixing Water pump to Lift rain water including carriage of materials within all leads and lifts :-

Constructing manhole with R.C.C. top slab in 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4;8 ( icement ; 4 sand : 8 graded stone aggregate 40 mm nomonal size), inside plastering 15mm thick with cement mortar 1:3 (1 cement : 3 sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing including carriage of materials within all leads and lifts :-

Inside size 800mmx800mm and 500 mm deep including C.I. cover with frame (Light duty single seal pattern -1) 455x610 internal dimensions total weight of cover frame to be not less than 38 kg.(Weight of cover23 kg and weight of frame 15 kg.)with 200mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand) :-

Providing and fixing cast iron cover 300X300 mm with frame for gully trap the weight of cover to be not less than 4.53 kg

Providing and fixing C.P. Grab Bar 40mm dia steel pipe at 78 cm.Ht. with M.S. Plate as per detail as the position of seat and wash basin complete as per Arch. Drg.

PRAHLAD SING NEGI

Kailash Chand

ajay sharma

Vijay Kumar

RAJVIR MOTORS